Multiple Managed Server for Hyperion Planning in 11.1.2.2

Hi All,
I was going through some online documnetation/new features on Hyperion Planning 11.1.2.2 and came to know that from an architecture standpoint we can now have multiple Planning Managed Servers in a cluster thereby making it truly Highly Available.
I have done a standard deployment and can see a cluster for Planning with a single managed server Planning0 in weblogic admin console.
Can any one please provide me insight/documnetation as what steps needs to be done to create multiple planning managed server in 11.1.2.2.
Thanks
Perwez

Thanks John.
I was not looking for something which is scaling out Hyperion Planning(via load balancer)/Horizontal clustering.
But was looking for some thing like Vertical clustering(multiple JVMs/nodes of Hyperion Planning within a single planning server) which was applicable in 11.1.1.3.
Came to know that with 11.1.2.2 vertical clustering not more supported.
Thanks

Similar Messages

Is Oracle Configuration Manager Available for Hyperion Planning Servers?

The "My Oracle Support" site (https://support.oracle.com) describes the values of installing the Oracle Configuration Manager on servers.
Question: is this available for the Hyperion products or just Oracle databases? If available for Hyperion products, does it add value to tech support?
Any comments would be appreciated.

John
This is partially correct. If you user12136418 are looking for a way to monitor health automatically and get access to web ex session technical support from one console OCM is a great tool. The fact that it is not a thick client in nature nor a windows service makes it ideal for having agents monitor network traffic SNMP and still have all hyperion health monitored without having to run a tool like SCOM. I have been waiting for this tool for a year . Now if only Hyperion would work with IE8. But we all can not have egg in our beer.
Thank you
Michael Worthylake
Systems Analyst
DJO, LLC
1430 Decision St.
Vista, CA 92081-8553 U.S.A.
Direct: 760-734-5631
Cell: 760-445-0746
www.djortho.com
[email protected]

Firefox browser settings for Hyperion Planning 11.1.2.3.500

Hi All,
I am windows 8.1 OS on my laptop. So I have only IE version 11 and I cannot degrade to IE10.
I installed Firefox 31.4.0. Does Hyperion planning work on this version of firefox? if not, what is the latest version of firefox I can use?
Is there any browser settings needs to be done in Firefox for Hyperion planning?
Thanks in Advance.
SKH.

Hello,
For all IE compatibility related information you can refer to the support document :
Hyperion Enterprise Performance Management (EPM) Products Support Status for Internet Explorer ( IE6, IE7, IE8, IE9, IE10 and IE11)
https://support.oracle.com/epmos/faces/DocumentDisplay?id=1355681.1
For Firefox browser settings related information you can refer the support document :
Error Occurs When Opening Workspace in Firefox: "Remote XUL Manager Add-on For Mozilla Firefox Is Not Configured"
https://support.oracle.com/epmos/faces/DocumentDisplay?id=1946064.1
Hope this helps!

Issue listeneing queue from Weblogic Cluster server with multiple managed server

Haveing issue listeneing queue from Weblogic Cluster server with multiple managed server.
Weblogic Cluster structure is like
Weblogic Cluster01
--ManagedServer01(http://server01.myhost.com:7001)
--ManagedServer02(http://server02.myhost.com:7001)
JMS Servers
JMSserver01 targeting: ManagedServer01
JMSserver02 targeting: ManagedServer02
JMSmodule
ConnectionFactory01 targeting:JMSserver01,JMSserver02
UDQueue01 targeting:JMSserver01,JMSserver02
Uniform Distributed Queue in Monitoring tab showing like this
mysystemmodule!JMSserver01@UDQueue01
mysystemmodule!JMSserver02@UDQueue01
So when I am sending message to any Host(by specifying the provider URL) its distributing equally on both server like
mysystemmodule!JMSserver01@UDQueue01 10
mysystemmodule!JMSserver02@UDQueue01 10
But when try to listen message from these queue, it is listening from one server, for which URL given to connect.
mysystemmodule!JMSserver01@UDQueue01 0
mysystemmodule!JMSserver02@UDQueue01 10
untill I connect to other server by giveing its URL, will not able to access other message left on the queue.
Solutions that tried
1) we have tried give both server URL coma sparated in provider URL
we need to configur same scenario for 5 managed server with 3 listener on other servers.
Do any one have solution for this.

You need to have:
1. Consumers connected to each UDQ member
OR
2. If no consumers in some of the members is expected, you can configure Forward Delay (specify the amount of time, in seconds, that a queue member with messages, but with no consumers, will wait before forwarding its messages to other queue members that do have consumers):
http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13952/taskhelp/jms_modules/distributed_queues/ConfigureUDQGeneral.html
For example you can set it to 10 (10s)
Additional Information here:
http://docs.oracle.com/cd/E23943_01/web.1111/e13727/dds.htm#i1314228
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/mbeans/DistributedQueueBean.html?skipReload=true#ForwardDelay
How Does JMS Load Balancing Work with Distributed Queues and Uniform Distributed Queues? (Doc ID 827294.1)
I hope this helps
Best Regards
Luz

Mozila FireFox is supported for Hyperion planning verion 4.0 ?

Hi All,
As i know IE6 browser is supported for Hyperion planning 4 then how about other browsers like Firefox & Chrome ? those browsers will work or not ?
If not, Why ?
I am able to login into my Hyperion web page through Firefox but m getting Error like "NS_ERROR_NOT_AVAILABLE"..and also not able to see the menu's like File,help,tools etc.
Please suggest to overcome this issue..
Thanks in advance.
Regards,
Prabhas

Hi Prabha,
Can you tell which version of Planning you are running on?
Go to the below link, download the support matrix for the version you are on and then verify support for Client/Server platforms.
http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html

@Hsp functions for Hyperion Planning

Hi Gurus,
Did any one find the documentation on @Hsp functions (like @HspAddPageCombination (),@HspConcat (),@HspCreateCDFSession ,@HspCreateEssbaseServerFile (),@HspDateToString (),@HspGetFileName ()) available in EAS for planning applications?

I put port 11333 on server where is my workspace for planning install and I finally succeeded reverse engineering model for Hyperion planning.

How to find maximum number of users we can assign for Hyperion Planning.

HI,
How to find maximum number of users we can assign for Hyperion Planning.i.e., how to find license limit in hyperion planning 11.1.2.1.
In Essbase propreties, the system is showing maximum planning users could be 65535.
what would be the number for concurrent scenario?
Thanks
Giri
Edited by: Giriprasad on Jun 18, 2012 2:18 AM

The number of users would be based on your license agreement with Oracle, the system is not aware of your license agreement so it is up to you to stick to it.
Cheers
John
http://john-goodwin.blogspot.com/

Deployer Installation: Failed to validate Release Management Server for Team Foundation Server 2013

Attempting to install the deployer on a machine and getting the below error. Not sure what that means, out of turn error or what actually occurs at this step, validating release management server, during the configuration piece. The user,
that we set for the service was validated fine. The user is an service account in the TFS RM Server, is an admin on the local box as well.
I am able to get into the TFS RM Server through the client just fine. I can hit the TFS RM UI just fine as well.
Curious what would not allow the deployer to complete as mentioned below.
Any help is appreciated.
I, 2013/12/16, 14:46:26.521, Validated account to use as identity for Release Management Services.
I, 2013/12/16, 14:46:26.521, Validating Release Management Server for Team Foundation Server 2013...
E, 2013/12/16, 14:46:30.905, Received Exception : Microsoft.TeamFoundation.Release.CommonConfiguration.ConfigurationException: Failed to validate Release Management Server for Team Foundation Server 2013.
at Microsoft.TeamFoundation.Release.CommonConfiguration.DeployerConfigurationManager.ValidateServerUrl()
at Microsoft.TeamFoundation.Release.CommonConfiguration.DeployerConfigurationManager.ValidateAndConfigure(DeployerConfigUpdatePack updatePack, DelegateStatusUpdate statusListener)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
I, 2013/12/16, 14:46:30.905, Work completed for GetConfiguration() call : got out of turn error
E, 2013/12/16, 14:46:30.905, Failed to validate Release Management Server for Team Foundation Server 2013.

Hi Kpdn,
Thanks for your post.
All your participation and support are very important to build such harmonious/ pleasant / learning environment for MSDN community.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can i set a node manager serve for 2 domain on one machin??

My question is simple.
I installed webcenter suite and soa suite in a machine using difference linux user and difference middleware home.
and I want to set a node manager server for two domains (soa_domain and webcenter_domain).
Is is possible?
When I tried to register domain list in node manager domain list using nmEnroll() of wlst, it failed.
please check following logs in 7101 is admin server port of soa domain and I ran node manager on webcenter domain.
Thanks in advance.
BmW.
~~~~~~~~~~~~~~~~~~
wls:/offline> connect()
Please enter your username :weblogic
Please enter your password :
Please enter your server URL [t3://localhost:7001] :t3://localhost:7101
Connecting to t3://localhost:7101 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'soa_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> nmEnroll('/u02/app/soa11g/middleware/user_projects/domains/soa_domain', '/u02/app/wc11g/middleware/wlserver_10.3/common/nodemanager');
Enrolling this machine with the domain directory at /u02/app/soa11g/middleware/user_projects/domains/soa_domain ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 1447, in nmEnroll
File "<iostream>", line 1848, in raiseWLSTException
WLSTException: Error occured while performing nmEnroll : Problem enrolling the machine. : /u02/app/soa11g/middleware/user_projects/domains/soa_domain/config/nodemanager/nm_password.properties (Permission denied)
Use dumpStack() to view the full stacktrace
wls:/soa_domain/serverConfig> exit();

you might be victim of the "node manager starts WL Server with same Unix user id that was used to start Node Manager itself" problem
see here http://forums.oracle.com/forums/thread.jspa?threadID=2184607&tstart=89
I have been looking everywhere for a simple way to tell Node Manager to use a different Unix UID,
anybody any clue?
here http://download.oracle.com/docs/cd/E12840_01/wls/docs103/nodemgr/overview.html the Node Manager doc page

Creating data server for Hyperion Shared Services (HSS)

Hey Gang,
Has anyone had experience in creating a Data Server for Hyperion Shared Services (HSS) using the java API? I know HSS uses Native Directory, but to be compliant the Hyperion folks recommend using the java API strictly to get access to the users, groups, etc.
Anyone have experience with this, or perhaps at least how to get ODI to kick off a java file to pull the data needed? What effort would be needed in ODI, is it straight forward or would I have to develop a technology or something to integrate into ODI?
Thanks.

Thanks for the quick reply John. I am trying to get user and group information, and also doing some complex manipulation. I need this to verify user access and some other stuff. I will not always have access to HSS and cannot always export the information, thus the need to use the HSS java API.
I'm trying to pull it out of HSS and put it into an Oracle table in a standard format where I'll use the information and do reporting off of it. I've developed a java class that does migrates the data over, but its crude and I'd like to move it into ODI with some of our projects that are currently doing the same thing with other ERP such as Ebiz and Peoplesoft.
If I can recode some of the java in ODI, how would I go about doing that. Where would I include the libraries, etc.? is there a tutorial or a place where I can get started on that.
Thanks for all the help.

Why do we use port no. 11333 for Hyperion planning?

Why do we use port no. 11333 for Hyperion planning Metadata Load through ODI?

What more do you need to know, when you deploy planning you will see that there is a "Java RMI Registry" service/process, this runs on port 13333. The planning adaptor communicates with the RMI registry and that then communicates with planning. If you need to know more then search for "Java RMI" on the internet.
Cheers
John
http://john-goodwin.blogspot.com/

Changing RDBMS Server for Hyperion Essbase

Hello All,
We have installed and configured 11.1.2.2.100(Essbase, EIS, Studio, Shared Services) on Windows 2008 32-bit Server successfully.
Everything went fine and all products are working.
Now we changed the RDBMS Server for Hyperion Essbase and ran the configuration once again with new RDBMS server with "Reuse existing tables" option.
H1
| First Current
DB1 -> DB2
From that time we are unable to access the essbase server.
We were able to see the users in Shared Services. All users able to login to Shared Services, EAS but problem with Essbase.
In HSS_Component table found old server name in two places, we have updated the old DB server name to Current DB server name.
When we try accessing essbase we are getting the below error(tried with hostname, ip address, EssbaseCluster1 as Essbase server)
Network error [10061]: Failed to connect to [Server Name:1423]
Error: 103: Unexpected Essbase error 1030818
Error: 1042006: Network error [10061]: Failed to connect to [[ServerName]:1423]
Error: 1030818: Login failed. Please check if server and port are correct. If you received timeout or handshake failure,
please check if you tried to connect to secure port without secure keyword or clear port with secure keyword.
Please help me to resolve this issue.
Thanks,
Prathap

It is extremely important that you know what you are doing before touching the shared services registry and the correct way is not to update tables, it is to use the epmsys_registry utility.
To be honest you may have screwed up the registry and that is something I am not going to get involved in, try discussing with Oracle what you have just done.
If it is only the rdbms servername changing (not the essbase server) then you should follow the instructions in the documentation - Changing the Shared Services and Registry Database Connection Information and Password
Cheers
John
http://john-goodwin.blogspot.com/

Computer based training (CBT) for Hyperion Planning

We would like to know is there any computer based training (CBT) for Hyperion Planning that can be delivered to end users either in DVD video format or CDROM interactive format? We have checked with Oracle and they do not provide such training material except for formal classroom training offered by Oracle University.
Thanks in advance!

JohnGoodwin wrote:
Hi,
As you say Oracle don't provide any such training, Hyperion used to provide some CBT packages for end users but that was a while back and before they were bought out by Oracle.
I think your best best would be try to search on the web for any 3rd party training companies who deal with Hyperion, I am not sure if there will be that many dealing with CBT though.
Cheers
John
http://john-goodwin.blogspot.com/
Thanks John for your advice. I am searching on this matter too but just want to know if there are some reference used by some other Hyperion users.

Traning exam for Hyperion planning

Hello,
where can i find same traning exam for Hyperion planning?

Try - http://www.oracle.com/partners/en/knowledge-zone/database/hp-exam-page-168556.html
Cheers
John
http://john-goodwin.blogspot.com/

Creating Managed Server for Weblogic that comes with Oracle Service Bus

I've installed Oracle Service Bus 10.3.
Weblogic Server 10.3 comes bundled with OSB 10.3.
Everything is working fine in the Admin Server.
But when I create a Managed server and try to start it, I get the following exception and server doesn't start :
####<Nov 10, 2009 10:24:32 AM IST> <Critical> <Security> <iflmud6dlb5jn> <OSBManagedServer2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257828872747> <BEA-090403> <Authentication for user weblogic denied>
####<Nov 10, 2009 10:24:32 AM IST> <Critical> <WebLogicServer> <iflmud6dlb5jn> <OSBManagedServer2> <main> <<WLS Kernel>> <> <> <1257828872747> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
     at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I've tried changing the boot.properties file and given clear text username and password, but even this did not change the exception.
Are there any other security concerns that are to be taken care of while configuring Managed Server for Oracle Service Bus?
Kindly help.

How are you starting the manageserver. Is it using command line or using NodeManager from Weblogic console of admin server. Most of the times we start managed server using yourDomain/bin/startManagedWebLogic.cmd (.sh).
startManagedWebLogic nameOfYourManagedServer adminURL(Ex: http://host:port).
If you created a managed server at the time of creation of domain itself using custom option, then under your domain root folder, you should see a file named like "startManagedWebLogic_readme.txt" that kind of gives the same above command.
If you added the managed server later on, to an existing single server domain, then you can use the above command.
Ravi Jegga

Multiple Managed Server for Hyperion Planning in 11.1.2.2

Similar Messages

Maybe you are looking for