Multiple masks not adding like they should

Hi all,
I don't use motion all that much, so I may have not done something right. I have a video clip with an object I need to isolate from the background. E object is complex enough where I'll need to have multiple masks make to do it properly. So I add my footage to a group, then add my first mask. Once it's set up, I select the footage layer again in the group and add a second mask and so forth. The problem is it is only showing the top mask in the list of masks under the video clips layer. If I reorder the masks in the layer, whichever mask is at top will be the only one that exposes the footage. I checked and all masks are set to add, and all are part of the footage layer (there is a disclosure triangle on the footage layer that will show/hide the masks). I'm not sure what I may have done wrong. Any tips would be welcome!!

Sorry I can not reproduce what you are seeing. Make sure all masks are set to add for the blend mode and the invert check box is not checked. If that doesn't solve the problem, I would trash Motion preferences using Digital Rebellion's "Preference Manager' which is a free download.

Similar Messages

My passbook on my iphone 5 works the same as it did for the iphone 4, its not working like it should. why?

my pass book on my iphone 5 does not work like it should, it works just the same as it did on the iphone 4, i tryed the date an time trick like 5 times an still nothing. i tryed factory reset an nothing. i know it workds different on the iphone 5 then the 4. but i dont know what else to do.

Can you be more specific about what isn't working? Are you running iOS 6 or iOS 6.1?
Did you read the support page on Passbook? http://support.apple.com/kb/HT5483

Siri is not working like it should i ask it to play songs and it just says sorry i cant do that any ideas y

siri is not working like it should i asked it to play songs and it just says sorry i cant do it any ideas y

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

If you put iOS 7 on an iPod 4th generation would it just ruin it, of would it just not run like it should?

If you put iOS 7 on an iPod 4th generation would it just ruin it, of would it just not run like it should?

Same answers as your other post!!!

I have a canon printer with a mac computer. For some reason whenever I print something the ink on the page is all green not black like it should be. I put in a new black ink cartrridge but that didn't change anything.Does anyone know why this is happening

I have a canon printer with a mac computer. For some reason whenever I print something the ink on the page is all green not black like it should be. I put in a new black ink cartrridge but that didn't change anything.Does anyone know why this is happening?

You posted in the OS 9 & below forum. What OS X version are you using? What model Canon printer? Canon printers have a test print capability (open the Printer Utility). What happens when you do a test print? Are all the printer cartridges in their proper location? Sometimes when you print "black", the printer uses a mixture of the colors to get "black". In the Printer Utility, check the levels of the other cartridges. There may be one color that is clogged.
 Cheers, Tom

TS3048 I have just purchased a new apple cordless keyboard. The numeric line of keys along the top are not functioning as they should. For example I am unable to get a question mark or a forward slash. I have tried holding down both shift and alt keys.

I have just purchased a new apple cordless keyboard. The numeric line of keys along the top are not functioning as they should. For example I am unable to get a question mark or a forward slash. I have tried holding down both shift and alt keys.

Thanks for prompt response - I tried what you suggested but I'm afraid it has not helped. It seems as though the line of number keys along the top aren't actually doing what is printed on them. Some are OK, but the further towards the right hand side of the keyboard you go, the less predicatable it becomes. So whilst the second key from the left gives me 1 and ! when holding the shift key, by the time I get to the 6 when I press and hold shift I get ^ rather than & symbol which is what is actually printed on the key. The & symbol is actually on the next key along - and when I hit the key with 8 I get * rather than the ( which is printed on they key but actually located on the next key along. Things get even more muddled by the time I am over on the right hand side as rather than a question mark (I have had to type the word as I cannot find the symbol anywhere!) I get this _ and the other symbol marked on the key is a comma, but I get - instead. It is going to drive me mad if every time I want to type something it is a guessing game....! What do you suggest - question mark

My email on my iMac and email on my iphone are not syncing like they used to

my email on my iMac and email on my iphone are not syncing like they used to

https://www.apple.com/support/mail
https://www.apple.com/support/icloud
https://www.apple.com/support/iphone
Mac OS X Help
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
https://www.apple.com/support/imac

RegExp not working like it should

Maybe I just need another pair of eyes looking at this, but I have a RegExp instance that should work according to multiple tools on the web but it's not matching when it should in my application. The expression should match if there isn't any leading or trailing spaces. Here's a code snippet:
var regexp:RegExp = new RegExp("^\S.*\S$|^\S(?!.)", "s");
if(regexp.exec("Hello World") == null)
trace("NO MATCH");
Using tools such as Grant Skinners RegExr (http://gskinner.com/RegExr/) it appears that the previous code should get a match. Does anyone see an issue or know why it isn't working?

Hi All,
while assigning value to a RegEx in constructor itself, we can either specify pattern (for which we need not escape already escaped character)
like
var regexp:RegExp = new RegExp(/^\S.*\S$|^\S(?!.)/s)
or we can specify a string (for which we need to escape already escaped characters)
like
var regexp:RegExp = new RegExp("^\\S.*\\S$|^\S(?!.)","s")
Regards,
Abihshek Chaudhary

ITunes Wi-fi sync not working like it should.

So I got a new ipod touch 4th generation because my other one broke. I'm trying to set up wifi sync so I don't have to connect the device to the computer incase it malfunctions. Half the time it doesn't work, and if it does work, I still have to connect it directly to the computer. Sometimes I use wifi sync the first time and it doesn't work, then I plug it into my computer and it detects it. Then I unplug it and use wifi sync and it works like it should. So it kind of defeats the purpose of using wifi sync if everytime I want to sync content through wifi, I'm forced to connect the ipod to the computer. Is there something I'm doing wrong? Please Help!
Also, my Ipod is not even a month old and is working like new. It is refurbished.

Have you looked here:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing

Push notifications often do not alert as they should.

We are finding that push notifications are not functioning as it should. Most of the time no alerts are present but then you unlock your phone and then you are hit with a flood of notifications. Settings are set correctly under "notifications".
Hardware: iPhone 4S
Software: iOS 7.0.5 on most devices. 7.0.6 on the rest.
How can we solve this? Thanks in advance!

Hello DaemonPix,
Thank you for the question. It sounds like there is you are not receiving notifications while your phone is locked. Have you checked to see if Do Not Disturb was accidentally enabled? You will see a "moon" icon in the status bar if it is enabled.
You can disable Do Not Disturb in Settings > Do Not Disturb or in the Control Center as described in the following articles:
iOS: Using Do Not Disturb
http://support.apple.com/kb/HT5463
iOS: Understanding Control Center
http://support.apple.com/kb/HT5858
Thank you for using Apple Support Communities.
Best,
Sheila M.

Javascript codes not working as they should in version 7

I have a website that is working fine with version 3.6.9, now it is not working as it should be with version 7. My files containing javascript codes, the links in the codes are broken when am registering some controls using the <%@ Register .... /> tag.
for example:
i have the following code:
<%@ Register Src="~/Controls/TempMenu.ascx" TagName="TempMenu" TagPrefix="uc1" %>
now, whenever I click on any button in the page, instead of redirecting me to an existing page within the same folder, it will go to the "controls" folder and search for the page there...
Please help.

A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25

Function keys does not work as they should.

The function keys has worked as they should since I bought the computer.
When I turned on the computer yesterday, the function keys didn't work as they should.
Example:
Before: When I hit the F5, the light in my keyboard was turned on/off. When I hit Fn + F5, I refreshed the browser page.
Now: When I hit the F5, I refresh the browser page. If I hit Fn + F5, I still refresh the browser page.
I used to control the volume on the computer with F6-8, but now I have to click the speaker icon in the lower right corner and manually "drag" the volume up or down.
Does anyone know how this can be fixed?

Hi @Andy19955 ,
Please try disabling Action Keys Mode in the BIOS, using the steps in this document:
Disable the Fn + Function Key Combination on Certain Models
Please click the thumbs up button to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
I am an HP employee.

I used advanced systemcare 5 on my computer and since doing so Firefox has not worked properly. Web pages won't load up like they should if at all. Has anyone else experienced this problem? What can I do to fix Firefox?

It maybe to do with the registry cleaner. Most people seem to fix it by using restore points which I just realised I hadn't created any beforehand....don't lecture me on it I already know, stupid move.
Using Vista.
I also know I have a lot of stuff like plug ins and such that I don't need nor use but I'm lazy :D

It does not immediately delete the files that are missing.. it merely tries to backup the new files it has discovered on the external drive. Since you moved the files there, the backup at least for a while will contain both copies.. and that is why it doesn't have enough space to backup.
Fixing the problem.. hmm pondini is the expert.. you should be able to delete the backup of the photos in existing backup.. there are instructions to do it.. but it is a very poor way to do things.
Much better. .archive off the existing backup.. this is long and slow but worth it. you need a usb drive of the same size as the TC drive. Then erase the TC and start a fresh set of backups.
The alternative is to use the USB drive as a new target.. but it is much slower than the TC internal drive.
http://pondini.org/TM/12.html

Images Not showing up like they should on published site...

Ok so here is my problem. I have a site that I upload to a host via fetch. When I first create pages, I upload and check it out and everything looks great. But, as soon as I edit one of the pages and upload, that page's images is all screwed up. Its like when I publish to a folder, it cache's the files or something so old files images I don't even have anymore are stretched on the new ones. I delete the files of previously published sites before I publish to folder every time i update it. I don't know how to explain it, its like it has both files same name and so it looks messed up. ::sigh:: Anyone have any ideas?
Here is the page on my site thats messed up....
http://www.luckykitty.biz/BookaDate.html
as you can see the picture file names are wrong or something. refresh it and the shapes stay pretty much the same but the images change. Keep refreshing and it keeps changing!!
I can fix it by making a whole new page with a different name but its such a pain because I am contantly updating things. There are many aspects to the site, for instance I have had to redo every single page of every girl on there before from scratch because of this.
Also for some reason if you click "live cam" at the top then the live cam pinkish blue page in the center doesn't go all the way to the top. It us to! now it doesn't
Any ideas? Anyone? Is there some folder I'm missing or setting I'm missing here?

You have to be fairly well organized when you are uploading to a server via FTP.
I publish my site, first to a folder on the desktop. This way it doesn't get confused with any previous published versions.
To avoid uploading my whole site if I just have a few alterations to one page, I then drag the page folder, along with any other supporting files, to an Input folder.
I then run the files through Web Site Maestro to optimize and upload them. This application has a "Smart handling" feature which ignores any files that haven't changed.
If you use this method with any good FTP application that can "recognize" changed files, it makes life a lot easier. If I don't need to optimize, I use the FTP application Yummy.
If you are publishing to a folder it doesn't make sense not to optimize your files. This will give you a far faster downloading website and even give it a chance to actually load in Internet Explorer.

On websites like Flickr the pages are not now forming like they should, I am just getting lists.

Something has changed the way Firfox is working, on Flickr I get lists instead of the usual images, and on hot mail I cannot delete emails. (I click on delete and nothing happens)
I have recently removed some files and cookies.

Why not reconstruct the pages in InDesign they way you want the double pages to appear. There may even be an imposition script available that will do the trick. You could then output to pdf all the pages you want the full spread on. Leave the original to create the pages you wanted left as is.
You can ask in the ID forum about an imposition script. I know there was one with CS4, there may have been one with CS3.

Multiple masks not adding like they should

Similar Messages

Maybe you are looking for