Multiple master regions for single detail

I am trying to created a master / detail with spry. the problem is that I need to have the master area grouped in three different sections separated by titles and each title would have styling including background image.
I can think of two different ways of doing it but each one has it's own problems:
1. create mulitiple master regions with different data sources that would update a single detail region. I simply do not know how to do this.
2. add styl sheet to the .html that has the data table for the dataset. the problem is that the dataset only caries the data through but not the styling associated with it.
I am new to this and any kind of help is realy appreciated.
thanks in advance

I didn't see any multiple dataset detail regions in your page.
Also this might a other solution for you, the Spry DataSet Shell;
It allows you to swap between different datasets.
http://labs.adobe.com/technologies/spry/samples/data_region/DataSetShellSample.html
http://labs.adobe.com/technologies/spry/samples/data_region/DataSetShell_accordion.html

Similar Messages

Multiple webdynpro applications for single webdynnpro component

I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance .
Rgds,
Praveen

Hi Saravanan,
I need to modify it from the portal end, not at the application level.
I need some configuration steps which specifies how to modify the Detail Navigation in PPM. Using SPRO we can do some configuration, i wanted to know whether its possible from portal end as well.
Regards
Shivas Bhan

Multiple contact persons for single vendor--LSMW

Hi experts,
i want to upload multiple contact persons for single vendor. using lsmw direct input method or recording method is it possible..if possible can u let me know the procedure.
Thx in advance,
Neelu

Hi
in our company v wil upload contact person details in Sales Data......
so its not possible to upload more than one contact person for vendor....
can u tell me wr u people wil enter the contact person details?
Regards
Smitha

Multiple storage locations for single material - ECC 6.0

Hi
Can anyone let me know, how one can map multiple storage loctions for single material?
regards
Sanjay

hello,
Go to SPRO --> IMG --> Materials Management --> Inventory Management and Physical Inventory --> Plant Parameters.
Tick Create storage locations automatically. System will extend the material to the storage location maintained in the transaction.
Nikhil

Can I set up a Master-Detail Page with report regions for 2 Detail Tables?

Hi there,
I am just starting to use Application Express.
I have a Table (A) with Master-Detail relationships to two Tables B & C.
I can set up a Master-Detail Page between Table A and Table B, where the records displayed in Table B change when switching between records in Table A. I would like to add Table C to the page and for this to work in the same way.
Is this possible in APEX? (I've tried adding a report region for Table C and making the Region Source dependent on the same ID field as is used by the report region for Table B but I keep getting "No Data Found" for Table C).
Many thanks.

Thanks, but the text needs to be on a single master page which every page is assigned to. This is so the text alternates correctly regardless of whether new pages are inserted or moved. If I assigned separate master pages to individual pages and then moved the pages to a different location, the alternating footer text would then fall out of sync. I hope that made sense!

Export to Excel - Multiple Tables in a single details section

Hi All,
I have a set of reports where I am using a single details section to show multiple tables stacked over one another. That is, i have a table with three columns and two rows, followed by some white space and then another table with 4 columns and 1 row, followed by white space and then other tables.
When I export it to excel, I am getting the data but the ordering is in a reverse pivoted fashion:
Excel output:
CR_column1_Heading    CR_Column2_Heading    CR_Column1_Data CR_Column2_Data
Is there a way to control the sequence of fields displayed in excel while exporting?
Thanks.
- Atif.

@Carl,
It is printing like this.
HEADER1   HEADER2    HEADER3     DATA 1     DATA 2     DATA 3
I am getting all the columns and fields in excel, that is not a problem. However, the problem is whether i can control the order the fields are printed onto Excel.
Like what Ben is commenting:
HEADER1   DATA 1     HEADER2    DATA 2     HEADER3     DATA 3
However, I dont want to reorder the fields on the canvas as the format layout is predefined.
I tried searching through the Cystal SDK if there is a finer level of control but to no avail.
A work around under the above constraints would be simply amazing!
Thanks again and appreciate your response.
Regards,
Atif.

Master Region for sub regions

I have four sub region which belong to a master region. I would like give a title to master region and have a border outline for this master region which includes all four sub regions. is this possbile, any ideas are appreciated.
thanks for your help,
Surya

thanks Arie, that's helpful. it works when I have all the regions displayed in "Column 1". is it possible to to apply similar technique, when I have three regions, top two regions displayed in column 1 and column 2 and third region at the bottom displayed in column1?
thanks for your help.
Regards,
Surya

How to use multiple tape drive for single filesystem on single client.

Hello All.
I want to backup single filesystem with multiple tape drive.
Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
Backup client has a single backup filesystem like /data1 directory with 4 LTO6 drives.
/data1 directory doesn't have a sub-direcotry, just present a files.
If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
Please anybody answer the questions.
Thanks advanced.

See how to use multiple tape drive from single client when I want to backup single filesystem?

Multiple Excise Invoice for Single GRPO

Hello All
How do we create multiple excise invoices from a single GRPO document.
Thanks
Santhosh.K

Hi
As per the scenario you mentioned.
You can't create multiple Excise Invoice against Single GRPO. And as per the law of excise also there is no way to do like this.
Gate Pass made against delivery when some vendor send the item to the client. Time quantity and rate with the duties are mentioned in that.
similarly when client received the material all the above should be there in the gate pass.
Ashish Gupte

Multiple email addresses for single characteristics in Email Bursting

Hello Experts,
We have requirement of Bursting email to external sales representative with only their relevent data.
We have used Bex Broadcaster with email Bursting as distribution type . But the problem is we have to send out
email to multiple sales reps for a particular sales rep i.e for a particular Sales rep we have to maintain multiple
email ids of sales rep and infoObj can have only 60 chars long. So I cannot put more than one email id.
Is there any work around to overcome this difficulty.
Also I could have use individula schedule but number of schedleis very high around 200.
Thanks,

I understand you issue and I dont think It can be solved in BW as they system is not expecting the users email address to be more that 60 chars, however you could create a rule in outlook (or whatever mail application you use) to forward all emails containing this header to the other email addresses. Thats my only idea

Multiple Work Center for single internal activity ?

If more than one work center used for single internal activity how can work center be allocated ?

Hi Yogesh,
I understand that, you have a project activity in which different groups of people are working and you want to plan costs for all these groups of employees under the same project activity.
To achieve this, create different activity elements under that activity and assign specific WCs and Work duration to all these activity elements so that system will calculate aggregated costs and scheduling dates accordingly.
Hope this helps

Posting multiple tax codes for single line order in MIRO

Hi all ,
I have received a request from my business colleagues to investigate the possibility of posting multiple tax codes against a single line order in MIRO.
This apparently can be a possibility for such things as training.
I have searched a number of forums and tried and tested different ways in my develoment client but am unable to find a solution. admittedly I am no real expert in this area and would be gratefu;lt of any ideas / assistance / etc..

HI, There is a possible solution for this scenario.
1. Create 2 tax codes for VAT and SERVICE Tax at 12.5% and 12.36% respectively
2. While posting the Invoice (TRX - FB60) following steps need to be followed.
3. Amount has to be split into two line items
4. Ist Line Item should have the Vat amount + 70000/- and select relevant tax code that was
    created for 12.5%
5. Similarly 2nd Line Item should have Service Tax amount + 30000/- and select relevant tax code that
    was created for 12.36%.
Hope this would meet your requirement. If the solution is okay, kindly indicate the points.
Regards
K.Sanjai Babu

Multiple PR's for single sale order

Hello all,
We are having Thrid party Scenario.For the sale order with multiple line items,single PR is created.
Is it possible to create PR for each line item in slae order?
Regards,
Shyam

I dont think that you can influence this. Why would you need individual PRs? you can process PR items individually.

Multiple message threads for single contact

A friend of mine happens to send iMessages from two accounts and it creates two message threads in Messages for me. Is there a way to somehow show one thread covering single account, even though it has multiple "physical" sources? Thanks.

No.

Multiple index entries for single object.

Hi,
Can someone guide me whether coherence allows multiple keys to be inserted in an index for given record(value)? I mean I will insert a single 'value' in the cache and multiple keys for it in the index, and I should be able to search that 'value' using ANY one key (not the combination of keys). I mean the search should use the index and hence should be fast. (Similar to lucene where it will tokenize the specified text and add individual tokens to the index so that you can locate given document using any single token).
Bharat

Hi Bharat,
Hopefully I am understanding your question correctly.
Adding an index allows Coherence to correlate attributes of values stored in a cache to the corresponding keys in the cache which can result in an increase in the performance of keySet and entrySet methods. This mechanism does not give you an alternate key to use with the get method.
cheers,
-David

Multiple master regions for single detail

Similar Messages

Maybe you are looking for