Multiple Master without Save

I want to add Multiple Master with Detail in Oracle Form 6i without Saving. As I have some validation prior to Commit

use the Post; built-in in the when-new-record-instance trigger.

Similar Messages

How to design interactive pdf. for multiple additions and saves???

Using LiveCycle designer - Can anyone clarify how we can let others make multiple additions and saves to an interactive pdf. I created in Live Cycle Designer 8.2.1...
I have created an interactive pdf. with LiveCycle designer and sent to client.
Is there any way I can give them ability to save the pdf. make multiple additions and saves and send back when they have completed it?
or even pull up the file make changes and resend at some point in the future without having to fill in all form field again?
Thxz much,
JR

Sorry but this is the wrong forum (this is for the Collaboration Services). You may want to try the LiveCycle Designer forum:
http://forums.adobe.com/community/livecycle/livecycle_es/livecycle_designer_es

Signing a document multiple times without saving it?

Hello all,
Can someone please tell me how do we sign a document multiple times without having to save the document after each signature?
For instance, I am a realtor and have to sign the contract about 3-4 times. However, when I sign it, Acrobat 8 prompts me to sign after each signature.
When I was using Acrobat 7, I could sign as much as I want and then save it. This is much more efficient and practical.
Can anyone advise me?
Thanks in advance.
Geo

Hi Geo,
It may be more cumbersome in version 8 (and 9), but it's safer. In version 7 and earlier when you signed, Acrobat did everything in memory. You weren't prompted to save the file to disk until you wanted to close the file. The problem is computer memory is where the bad guys get into to make changes. The majority of computer vulnerabilities occur when the hacker escapes the allotted memory space (aka buffer overflows) and reads and writes to memory address that they shouldn't be in. Think of memory being divided up like a row of houses along a block. The bad guy gets out of his house and into yours, and that's where bad things happen.
Beginning with version 8, signature operation all take place on disk, not in memory. It's slower, and as you pointed out it's more cumbersome, but it's safer. The file is committed to disk (the hard drive) before the signature is created and the signed bytes cannot be manipulated in the middle of the signing procedure.
Interestingly (at least to me), when we had this discussion four or five years ago when the change was made, the example used was of mortgage contact being signed where any of the terms could be changed in memory prior to the signature being completed. It was just a bunch of geeky engineers sitting around a table discussing possible vulnerabilities with the current signing operation (i.e. signing in memory). To see the theoretical example in actual use is kind of exciting (granted I don't get out much ).
Steve

Multiple Clicks to save a file

Hi!
I have to click multiple times on the save button whenever i need to save a file from internet on my new ToushSmart 600 PC. The mouse is working fine with all other clicks but when i click on the save button on any file that i need to download from internet or from my e-mail, the file download window gets unselected and then i have to click it multiple times to save the file.
Is anybody else having the same problem?
Thanks.

Hi OB,
Thanks for the reply. I had recently installed drop box so removed this hoping it might be the culprit, unfortunately not though, the problem remains.
I've also tried the 'usual suspects' without any luck either.
It really is an odd problem and not one I've encountered before. I also have an occasional issue whereby I'm unable to 'save for web' (only in Illustrator) - the option isn't selectable and even the keyboard short-cut doesn't work. It's glitch galore some days!
Scott

Apply multiple master pages to multiple layers

I have a document that has multiple layer and I need to apply a different master page to each layer.
Layers are as follows and in this order:
     USA Pricing
     No Pricing
     Euro Pricing
     Yen Pricing
     and so on.
I have a master page created for each versions layer. I lock all layers except the USA layer and apply the USA Pricing master to that layer it looks great.
So I lock that layer and unlock the next layer and apply the applicable master to that layer and so on but, even though the other layers are locked what ever master
I last applied is the one that sticks to all layers.
How do you get the master page to stick to each layer without using the Master page override to each layer and making it become part of the page?
If you do that and then you have a change to the Master page on a specific layer/version you have to edit every page and can not simply make a global change on the applicable master!!
Thank you in advance for any help that can be given.

Do you mean that only one master page can be applied per page and that it is automatically applied to all layers of that page?
"so it sounds like you need to create a new master page with the attributes you need for each layer included in one place."
I don't understand what you mean by this? I have created multiple master pages that have everything I need on them to be applied to each layer!
They just don't stick to the individual layer! Maybe it the "included in one place" part of your reply that will work but, I don't understand what you mean by that!

Flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC

Open And Edit Word File In SharePoint Site Programmatically (Without Save On Local system)

Hi Sir ,
I am working as sharepoint developer. I have face some problem in Edit and open document file in sharepoint site programmatically. I want to open file and edit directly in sahrepoint site without save in local system,
Issue: I have upload one doc file then try to edit and open but In that case file is dowanload and save in local save.

Hello,
As i understand you want to open and update word file. Please have a look at below links:
http://mysharepointwork.blogspot.ca/2010/06/programmatically-open-and-save.html
http://howtosharepoint.blogspot.ca/2010/05/programmatically-edit-and-save-file.html
It is good place to start.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How can I select multiple photos without tapping on each one individually

How can I select multiple photos without tapping on each one individually?

Op: without tapping on each one individually
tap all the photos you want to delete.
Note what the OP is asking.

Single step workflow with multiple approvers (without using a group)

Hi,
is it possible to have a single step workflow with multiple approvers without using a group? This is for a contract document.
i want to add a number of users based on particular logic. The approvers are random and do not belong to any particular group.
DO let me know if it is possible or if any of you have done that.
thanks in advance.
regards,
rubio

Hi Rubio,
I believe the behavior would be, if individual users are added as approvers then the system would require each approver to approve the document. However, if you use the user group, you could set the role so that it would be either ALL or ANY.
Regards,
Vikram

Is there a way to create a multiple event screen saver from iPhoto events?

Is there a way to create a multiple event screen saver from photos in iphoto? I can create a single event screen saver, but don't know if it is possible to create a screen saver with more than one event.

Drag the events you want into an album and have the screen saver run from the album.

Read multiple files and save all into one output file(AGAIN)

Hi, guys
I need your help for reading data from multiple files and save the results into one output file. When files are selected from file chooser, my program read the data line by line , do some calculations and save the result into the output. I made an array to store input files and it seems to be working fine, but when it comes to SaveFile() function, issues NullPointException message.
public class FileReduction1 extends JFrame implements ActionListener
   // GUI definition and layout
    /* ACTION PERFORMED */
    public void actionPerformed(ActionEvent event) {
        if (event.getActionCommand().equals("Open File")) getFileName();
    /* OPEN THE FILE */
    private void getFileName() {
        // Display file dialog so user can select file to open
     JFileChooser fileChooser = new JFileChooser();
     fileChooser.setFileSelectionMode(JFileChooser.FILES_ONLY);
        fileChooser.setMultiSelectionEnabled(true);
     int result = fileChooser.showOpenDialog(this);
     // If cancel button selected return
     if (result == JFileChooser.CANCEL_OPTION) return;
        if (result == JFileChooser.APPROVE_OPTION)
         files = fileChooser.getSelectedFiles();
            textArea.setText("");
            if(files.length>0)
                filelist="";
                System.out.println("files length"+files.length);
                for(int i=0;i<files.length;i++)
                     System.out.println(files.getName());
filelist+=files[i].getName()+" ,";
if (checkFileName(files[i]) )
openButton.setEnabled(true);
readButton.setEnabled(true);
textArea.append("file "+files[i].getName()+"is a proper file"+"\n");
readFile(files[i]);
textfield.setText(filelist);
else{JOptionPane.showMessageDialog(this,"Please select file(s)",
                "Error 5: ",JOptionPane.ERROR_MESSAGE); }
     // Obtain selected file
/* READ FILE */
private void readFile(File fileName_in) {
// Disable read button
readButton.setEnabled(false);
// Dimension data structure
     getNumberOfLines(fileName_in);
     data = new String[numLines][4];
     // Read file
     readTheFile(fileName_in);
     // Rnable open button
     openButton.setEnabled(true);
/* GET NUMBER OF LINES */
/* Get number of lines in file and prepare data structure. */
private void getNumberOfLines(File fileName_in) {
int counter = 0;
     // Open the file
     openFile(fileName_in);
     // Loop through file incrementing counter
     try {
     String line = fileInput.readLine();
     while (line != null) {
     counter++;
          System.out.println("(" + counter + ") " + line);
line = fileInput.readLine();
     numLines = counter;
closeFile(fileName_in);
     catch(IOException ioException) {
     JOptionPane.showMessageDialog(this,"Error reading File",
               "Error 5: ",JOptionPane.ERROR_MESSAGE);
     closeFile(fileName_in);
     System.exit(1);
/* READ FILE */
private void readTheFile(File fileName_in)
// Open the file
//int row=0;
int col=0;
openFile(fileName_in);
System.out.println("Read the file");
// Loop through file incrementing counter
try
String line = fileInput.readLine();
while (line != null)
boolean containsDoubles = false;
double temp;
String[] lineParts = line.split("\t");
try
for (col=0;col<lineParts.length;col++)
temp=Double.parseDouble(lineParts[col]);
data[row][col] = lineParts[col];
containsDoubles = true;
System.out.print("data["+row+"]["+col+"]="+lineParts[col]+" ");
} catch (Exception e) {row=0; col=0; temp=0.0;}
if (containsDoubles){ row++;}
System.out.println();
line = fileInput.readLine();
catch(IOException ioException)
JOptionPane.showMessageDialog(this,"Error reading File", "Error 5: ",JOptionPane.ERROR_MESSAGE);
closeFile(fileName_in);
System.exit(1);
//System.out.println("length"+data.length);
closeFile(fileName_in);
process(fileName_in);
/* CHECK FILE NAME */
/* Return flase if selected file is a directory, access is denied or is
not a file name. */
private boolean checkFileName(File fileName_in) {
     if (fileName_in.exists()) {
     if (fileName_in.canRead()) {
          if (fileName_in.isFile()) return(true);
          else JOptionPane.showMessageDialog(null,
                    "ERROR 3: File is a directory");
     else JOptionPane.showMessageDialog(null,
                    "ERROR 2: Access denied");
     else JOptionPane.showMessageDialog(null,
                    "ERROR 1: No such file!");
     // Return
     return(false);
/* OPEN FILE */
private void openFile(File fileName_in) {
     try {
     // Open file
     FileReader file = new FileReader(fileName_in);
     fileInput = new BufferedReader(file);
     catch(IOException ioException) {
     JOptionPane.showMessageDialog(this,"Error Opening File",
               "Error 4: ",JOptionPane.ERROR_MESSAGE);
     textArea.append("OPEN FILE\n---------\n");
     textArea.append(fileName_in.getPath());
     textArea.append("\n");
     //System.out.println("File opened successfully");
/* CLOSE FILE */
private void closeFile(File fileName_in) {
if (fileInput != null) {
     try {
          fileInput.close();
     catch (IOException ioException) {
     JOptionPane.showMessageDialog(this,"Error Opening File",
               "Error 4: ",JOptionPane.ERROR_MESSAGE);
System.out.println("File closed");
private void process(File fileName_in) {
//getNumberOfLines();
     //data = new String[numLines][3];
     // Read file
double temp,temp1;
     //readTheFile();
//System.out.println("row:"+row);
//int number=data.length;
//System.out.println(number);
for (int i=0; i<row; i++)
temp=Double.parseDouble(data[i][1]);
sumx+=temp;
temp1=Double.parseDouble(data[i][3]);
sumy+=temp1;
multixy+=(temp*temp1);
square_x_sum+=(temp*temp);
square_y_sum+=(temp1*temp1);
//System.out.println("Sum(x)="+sumx);
double tempup=(row*multixy)-(sumx*sumy);
double tempdown=(row*square_x_sum)-(sumx*sumx);
slope=tempup/tempdown;
double tempbup=sumy-(slope*sumx);
intb=tempbup/row;
double tempside=(row*square_y_sum)-(sumy*sumy);
double cordown=Math.sqrt(tempdown*tempside);
corr=tempup/cordown;
r_sqrt=corr*corr;
     textArea.append("Data for file"+ fileName_in.getName()+" have been processed successfully.");
     textArea.append("\n");
     textArea.append("Please enter output file name including extension.");
System.out.println("number"+row);
System.out.println("slope(m)="+slope);
System.out.println("intecept b="+intb);
System.out.println("correlation="+corr);
System.out.println("correlation="+r_sqrt);
saveFile();
private void saveFile()
textArea.append("SAVE FILE\n---------\n");
if (openFile1())
     try {
          outputToFile();
catch (IOException ioException) {
          JOptionPane.showMessageDialog(this,"Error Writing to File",
               "Error",JOptionPane.ERROR_MESSAGE);
private boolean openFile1 ()
     // search for the file path
StringBuffer stringpath;
title=textfield1.getText().trim();
int temp=fileName_in.getName().length();
int temp_path=fileName_in.getPath().length();
int startd=(temp_path-temp);
stringpath=new StringBuffer(fileName_in.getPath());
stringpath.delete(startd, temp_path+1);
//System.out.println("file-path="+temp_path);
//System.out.println("length-file="+temp);
path=stringpath.toString();
fileName_out = new File(path, title);
//System.out.println(file_out.getName());
if (fileName_out==null || fileName_out.getName().equals(""))
     JOptionPane.showMessageDialog(this,"Invalid File name",
               "Invalid File name",JOptionPane.ERROR_MESSAGE);
     return(false);
     else
try
boolean created = fileName_out.createNewFile();
if(created)
fileOutput = new PrintWriter(new FileWriter(fileName_out));
fileOutput.println("File Name"+"\t"+"Slope(m)"+"\t"+"y-intercept(b)"+"\t"+"Coefficient(r)"+"\t"+"Correlation(R-Squared)");
return(true);
else
fileOutput = new PrintWriter(new FileWriter(fileName_out,true));
return(true);
catch (IOException exc)
JOptionPane.showMessageDialog(this,"Please enter the file name","Error",JOptionPane.ERROR_MESSAGE);
return(false);
private void outputToFile() throws IOException
// Initial output
     textArea.append("File name = " + fileName_out + "\n");
     // Test if data exists
     if (data != null)
     fileOutput.println(fileName_in.getName() +"\t"+ slope+"\t"+intb+"\t"+corr+"\t"+r_sqrt);
textArea.append("File output complete\n\n");
     else
textArea.append("No data\n\n");
     // End by closing file
initialcomp();
     fileOutput.close();
private void initialcomp()
slope=0.0;
intb=0.0;
corr=0.0;
r_sqrt=0.0;
sumx=0.0; sumy=0.0; multixy=0.0; square_x_sum=0.0; square_y_sum=0.0;
for(int i=0;i<data.length;i++)
for(int j=0;j<data[i].length;j++)
data[i][j]=null;
/* MAIN METHOD */
public static void main(String[] args) throws IOException
     // Create instance of class FileChooser
     FileReduction1 newFile = new FileReduction1("File Reduction Program");
     // Make window vissible
     newFile.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     newFile.setSize(500,400);
newFile.setVisible(true);
Sorry about the long lines.
As you can see, all input files saved in array called files, however when OpenFile1() function is called, it take input (fileName_in) as a single file not an array. I'm assuming this causes the exception.
When there's muptiple inputs, program should take each file from getFileName() to outputToFile() sequentially.
Does anybody have an idea to solve this?
Thanks a lot!!

you naming convention is confussing. you should follows Java naming convention..you have a getXXX but decalred the return type as "void"...get usully means to return something...
your code is doing too much..and hard to follows..
1. get the selected files
for each selected file
process the file and return the result
write out the result.
/** close the precious resource */
public void closeResource(Reader in){
    if (in != null){
        try{ in.close(); }
        catch (Exception e){}
/** get the total number of line in a file */
public int getLineCount(File file) throws IOException{
    BufferedReader in = null;
    int lineCount = 0;
    try{
        in = new BufferedReader(new FileReader(file));
        while ((in.readLine() != null)
            lineCount++;
        return lineCount;
    finally{ closeResource (in); }
/** read the file */
public void processFile(File inFile, File outFile) throws IOException{
    BufferedReader in = null;
    StringBuffer result = new StringBuffer();
    try{
        in = new BufferedReader(new FileReader(inFile));
        String line = null;
        while ((in.readLine() != null){
            .. do something with the line
            result.append(....);
        writeToFile(outFile, result.toString());
    finally{ closeResource (in); }
public void writeToFile(File outFile, String result) throws IOException{
    PrintWriter out = null;
    try{
        out = new PrintWriter(new FileWriter(outFile, true)); // true for appending to the end of the file
        out.println(result);
    finally{ if (out != null){ try{ out.close(); } catch (Exception e){} } }
}

Rearrange pages when printing adobe form with multiple master pages

Hello!
Good day to you all.
I have an issue in regards with printing my adobe form with multiple Master pages. I have 4 master pages:
1st master page: a
2nd master page: b
3rd master page: c
4th master page: d
all with different headers and footers all having the same contents (items). I don't have issue with one page content (it just prints 4 pages with different headers and footers). The issue comes out once the items exceed 1 page.
What happens is that the preview/print shows (example: 3-page item)
a1-a2-a3-b1-b2-b3-c1-c2-c3-d1-d2-d3.
What i need is to print these such that all 1st pages of the 4 master page to be printed first, then all the 2nd pages, then all 3rd pages. Please see below:
a1-b1-c1-d1-a2-b2-c2-d2-a3-b3-c3-d3
This is because we will be using carbonless copy paper during printing and it's possible that it would be printed on batch jobs. Please suggest ways to do this.
Thanks a lot in advance!
Best Regards,
abap_peer_dangs

Hi,
Is that requirement of multiple pages as groups only at the time of print or at print preview also...?
Can you have a Print button on this screen or you should be using the Abobe toolbar's Print button..?
Well if this on a click of a button in the form and the requirement is only at the time of print and not on print prieview I can have a JS script which does this...
Let me know if this suffice, I can try with a local file and send you the script.
@ Chris: I didn't understand what do you mean by reported, I was eager to hear and learn a solution from you may be a new approach which I am not aware of ...?
Cheers,
Sai.

Is it possible to Create Material Master without Profit Center ?

Hai,
      1) Is it possible to Create Material Master without Profit Center ?
      2) How SAP System Validate Profit Center in material master. ? is it material Type wise ?
      3) Whether PO Order Creation,GRN & MIRO Possible for those material Master without Profit Center.?
Kindly Explain me clearly..
Thanks & Regards,
Swetha

Hi,
Profit center is at the plant level.
You can create material master even with out a profit center.This field will be there in the costing view and and general sales/plant data.
while creation of the materila master if do not select these views system will not ask for that.Normally it is pertaining to the costing analysis.
A profit center manager is held accountable for both revenues, and costs (expenses), and therefore, profits. What this means in terms of managerial responsibilities is that the manager has to drive the sales revenue generating activities which leads to cash inflows and at the same time control the cost (cash outflows) causing activities. This makes the profit center management more challenging than cost centre management. Profit center management is equivalent to running an independent business because a profit center business unit or department is treated as a distinct entity enabling revenues and expenses to be determined and its profitability to be measured.
Business organizations may be organized in terms of profit centers where the profit center's revenues and expenses are held separate from the main company's in order to determine their profitability. Usually different profit centers are separated for accounting purposes so that the management can follow how much profit each center makes and compare their relative efficiency and profit. Examples of typical profit centers are a store, a sales organization and a consulting organization whose profitability can be measured.
For more info,please refer
http://help.sap.com/erp2005_ehp_04/helpdata/EN/cc/36428094f311d2b47a006094b9b0a5/frameset.htm,
Regards,

Is there any way to change the security on multiple pdfs without having to open each pdf in acrobat ?

Hi all
Is there any way to change the security on multiple pdfs without having to open each pdf in acrobat ?

Hi Gilad
Thanks for the reply
I'm not sure how to create an action I have Acrobat Pro 8.
My company would love if I could make it as a batch file or some exe so that each file doesn't have to be opened in Acrobat

Posting multiple idocs without BPM

Hi all,
We have a JDBC->XI->Idoc scenario.
We would like to post "n" idocs to SAP for the "n" records fetched from database.
Due to performance issues we are not using BPM.
Is there any other way to post multiple idocs without using BPM.
rgds
Prashant

HI,
As suggested by others, it is possible without BPM.
For this, you need to alter the Idoc Schema i.e change the occurence of the idoc in the idoc schema. Then import this xsd as a External Definition into Repository..then mapping etc ..
Regards,
Moorthy

Multiple Master without Save

Similar Messages

Maybe you are looking for