Multiple Material Selection linked to Equip BOM

Dear Experts,
We have Equipment BOMs.
Now there is a requirement during Material selections in From To fields, that if I select the option 'Material by Equipment BOM' the list of materials under that particular Equip BOM should appear. (Exactly the way 'Material by Material Group' etc do) for this I need to have the above option in the Menu. i.e. Material by Equipment BOM. How do I achieve this?
Kindly help.
Regards
Jogeswara Rao

Hi ,
It might be not possible
but you can try copy from equipment bom
Regards
Jitender

Similar Messages

MD04 - Multiple Material Selection

Hi,
Currently MD04 is providing us a single material selection at Individual Access.
I was wondering is there any other way to select multiple materials at the selection screen beside using the collective access screen?
Thanks

Lee,
Only multiple option can be done using Collective access "MD07" as rightly pointed out by Vijay. But here it cannot be specific materials.. but a collection of materials my be by the way of filtering, and other selection criteria available
Regards,
Prasobh

Multiple Range Selection for field Material in CS14

Hi friends ,
Is it possible to make multiple range selection for material field in tcode CS14 [used to compare primary and secondary BOM] i have made it ZCS14.
if i make matnr2 to matnr2-low
but my doubt is it feasible solution
please through some light on this
regards
soorya

Dear Soorya,
What's your requirement? is that to compare the Alternative BOM's for multiple materials at the same time?
If it's going to be for comparing one more alternative for the same material,then it's a good report.
As per to my knowledge if the report is going to be for a list of materials Alternative BOM's means I dont
think whether it will be a fast(time wise) report.
Check & revert back.
Regards
Mangalraj.S

PM - Equipment BOM VS Maintenance Bills of Material

Hi,
In Materials planning, Using maintenance bills of material have advantage , know that there's Equipment BOMs
& Functional location BOMs.
When & How to use the Functional Location BOM ?
When & How to use Equipment BO?
Can we use normal production BOM (CS01) replace all this equipment BOM / FL BOM?
TQ.

Hi,
Production BOM will have the Materials in Header as well as in Item level. Even BOM usage will be defined as Production.
In Equipment / FL BOM, BOM will be created against the Technical Objects. These BOMs will be used in Maintenance Orders. In these BOMs, components of the Equipments (For example, equipment will be motor. Components may be capacitor, rotor, casing, etc.,) will be mentioned with the qty.
Based on the type of motor, components can be different type. So BOMs will be maintained by the MDM people. Maintenance Planner will create the Maintenance Order & BOM will enable him to select the right component (There may be different type of rotors in Material Master, but based on Motor type, rotor should be selected in Maintenance Order).
As Maintenance Planner will not aware of the type of component, BOM will help him to select the right component.
Regards,
Maheswaran.

Reservation and requisition for material in MO from the equipment BOM only

Dear all,
i want to create material reservation and requisition from the equipment BOM only which is maintain against that equipment ( in the 'list' tab of component).and which material is not in that BOM, system should not allow to create material reservation and requisition of that material in maintenance order.

Shahanawaz,
You could try making the material and material text fields display-only via field selection.
Otherwise, try user-exit CNEX0026 (general inspection of material) via TCode SMOD.
PeteA

In prod order multiple batch selection for my raw material /sf possible

Dear All,
One of problem I am facing is regarding multiple batch selection .
Scenario is like this
Finished prdt _ FMBLD003
RAW matl -      2RCH001
In prodn order my BOM requirement quantity for 2RCH001 IS 75 kg , I have material available in stock in three diffrent batches
0000111   40 kg
0000112   15 kg
0000113   30 kg
I can select any one batch at a time. Is there any option or possibility available wherein we can select multiple batches .
or Is there possibility that system should automatically split bom quantity as per the batch quantity available shown below
40       0000111
15       0000112
20       0000113
I tried but didnt found possible solution.
Please suggest .
Edited by: sapitheprabhu on May 3, 2011 7:28 AM
Edited by: sapitheprabhu on May 3, 2011 7:48 AM

Dear Prabhu,
When do batch determination you maintain req qty against to batch number in batch determination co: select batch.
0000111   40 kg
0000112   15 kg
0000113   30 kg
Jainashu

Dismantling of material from equipment BOM

Dear Experts
I am a beginner in SAP PM. I have one PM scenario. How to implement in SAP.
I want to dismantle one temperature gauge from one equipment for repaired, first I have to dismantle the gauge from equipment and after repairing I have to reinstall the gauge on equipment. How to proceed for that?
My temperature gauge is maintained in BOM for that equipment. How can I dismantle material from equipment BOM and reinstall that?
Thanks

Hi Iqbal
In IQ01 for the 'material' Temp gauge I created one serial no and equipment. I installed that equipment(temp gauge) on pump as sub equipment. Then before repairing, in IE02 itself I selected dismantle and dismantled. Is it the way you were mentioning?
Alternatively when I use the t-code IE4N it gives the following error massage: -
"Missing Customizing settings for software component ECC-DIMP
Message no. IEN126"
Can you please tell me the path details for IE4N. And is there any customising settings reqd for this T-code.
Thanks

Material Selection mandatory From BOM

Dear All,
While creating reservation for component through maintenance order can we make
material selection compulsary from BOM attached to the object?
User cannot create reservation if the material is not availabe in BOM.
Please suggest
Regards
Honyal

Thank you

Report for CS15 tcode with multiple material nos. in selection screen.

I want to develop a report for cs15 but with multiple materials.
Like in cs15 we enter the material and its plant, then click on multi level check box and get the output. But cs15 works only for a single material. I want to develop a report in which i'll give multiple material nos. and then i should get the output for each material entered just as the output that would appear in cs15 for that material.
How do i do it.
I have tried but i'm not able to track back.

Hi Priti,
try develop a interactive report which lists all the materials in the first screen and when you double click on each of the material then call transaction CS15 output by skipping the first screen .Use set parameter to pass the material .
Regards,
Sirisha

Error while creating equipment BOM (IB01)

hi guys,
while creating equipment BOM (IB01) i am getting this error, while adding components.
'Material type NLAG cannot be used with item category (plant 1000)'.
regards
chinta

HI Chinta,
I understood ur problem IB01-give the equipment number which is generated by the system and give plant name in which you have created the equipment and bom usage as 4 (plant maintenance) and press enter.
Then you will get the components list give the description,quantity and item category as:
as you gave it as L it is throwing an error give it as N(Non stock item), then you wont get the error.while selecting the item cat. you will get differnet components and you select the appropriate one based on you equipment.Hope you issue is resolved.
Regards,
Bharat

Equipment BOM

Hi,all,
I m maintaining equipment BOM for spare parts planning ,where all item category has been mentioned as "L",now from maintenance order I want to generate Purchase Requisition by changing the item category as "N" after selecting the specfic item from that equipment BOM .But item category field of the maintenance order is coming greyed mode ?how can I change the item category from "L" to "N" to trigger PR??
Also is it possible to create Purchase Requisition from t-code ME51N with reference to an equiment for which I have maintained BOM .Is there any field to enter equipment no from where I can retrieve the spare parts list ?Please give ur valuable suggestion how to proceed.
thanks in advance.
rgds
rajib

Hi,
BOM item should be maintain with item category u2018Nu2019 or while assigning component to order instead of double clicking on item (BOM item) , Just copy the material (ctrl+c) and assign category :u2018Nu2019 and quantity manually.
In case of second issue: You cannot create a PR with reference to Equipment and there is no field in PR to assign Equipment. If you are having cost centers assigned to equipment in 1:1 ratio, you can assign cost center in account assignment of PR item.
Or else you can go for a standing order that is one standing order is to be assigned to each equipment and same can be used for account assignment for procurement.
In case of capitalization of expense you can go for asset as account assignment.
If you are not looking for account assignment and just want to retrieve the PRs connected to Equipment then you can think of tracking no field.
Raju

Purchasing Group in equipment BOM ( Item level)

At the time of creating equipment BOM , purchasing group in equipment BOM (item level ) will be in sync with material master purchasing data.
When we change purchasing data (Purchasing group) in material master at that time system will not change purchasing group in old equipment BOM's at item level. Is there any standard method to maintain purchasing group in old equipment BOM in sync with purchasing group in material master data (System ECC 6.0 ehp5)
Thanks and Regards,
Pankaj

Thanks for reply Peter ,
Because of this issue wrong information is flowing to PR (when component selected from equipment BOM in work order).
Is there any negative impact if I will remove purchasing group at BOM item level ?
I did analysis for this and found no negative impact on PR , still looking for expert advice as client is not looking for any core modification.
Thanks and Regards,
Pankaj

Equipment BOM & Function Location BOM

Dear All,
We are created functional location BOM and we are created Functional location order.In that order i found the Equipment BOM which are linked with functional location.I assigned functional location BOM as well as Equipment BOM items for that order.It will take the items.In Functional location order Equipment BOM items should not take.
Pls.Help me.

Hi Srinu,
Your query is not clear.
Normally when your creating the maintenance order for Functional location. if this FL is having the BOM you will get the this BOM during the material planning in that order.
if your creating the maintenance order for Equipment. if this Equipment is having the BOM you will get the this BOM during the material planning in that order.
If there is no BOM you can plan the Material from the list also.
Regards
Venkat

Functinality to compare two material price with reference to BOM in CO

Hi All,
Is there is any functionality in Controlling which can compare the costing for two FERT materials.
or
is there is any functionality where we can compare two material price with reference to BOM in controlling
Please help me to compare the material price with reference to BOM
Regards
nandu

Hi,
You can use this report to compare two itemizations. The report compares the characteristics item number, item category, cost element, resource, material, cost center, plant/work center, cost center/activity type, operation number, BOM item, assembly indicator, and cost component.
You can access this report as follows:
Accounting ® Controlling ® Product Cost Controlling ® Product Cost Planning ® Material Costing ® Cost Estimate with Quantity Structure or Cost Estimate Without Quantity Structure ® Compare
or
Accounting ® Controlling ® Product Cost Controlling ® Product Cost Planning ® Information System ® Object Comparisons ® For Material ® Itemization Comparison.
For Detail Please reffer following link:
http://help.sap.com/saphelp_46c/helpdata/en/56/abd108f1a611d28a950000e8214595/content.htm
Thanks and Regards
Binoj M D

Tables or Logical database to create standard report for Equipment BOM?

Dear All
My client has requirement for the report with fields like to see the status of Equipment BOM(input of Equipment number in selection screen) or for Particular set of Materials(input of component number in selection screen) available stock quantity,storage location of stock,description of component,price of component,Pending PR of component(if any),Pending PO of component(if any) etc
I want to develop the report with standard infoset query instead of going for abap development.is there any logical database to map the report or what tables can i use for table joins??
Required sample report with fields as below
BOM Component
Stock available/Not available indicator
Description of Components
BOMQty/ UOM
Price
Part Number
Plnt
Sloc
Stock Qty
Bin
Pending PR
Pending PO
1000001121
YES
BEARING
NO
2000
ERS22
1000
MECH
4
A1
300012431
Regards
M.Manojkumar

Manoj,
The following is the tested solution.
Table join
Output
This figure shows the case of a Equipment BOM where 3 components are there. Installed Quantity are 4, 1, 1 respectively. Last two columns are showing the Storage Locations and the Stocks available.
Fields taken to output are
From STPO : IDNRK MENGE MEINS
From MARD LGORT LABST
As said before, more than this you can not do in SQVI. With this basic join in SQ02, using codes in Extras you can do much more.
Jogeswara Rao K

Multiple Material Selection linked to Equip BOM

Similar Messages

Maybe you are looking for