Multiple materials and currencies

Hi..
In My PO....(Import PO)
Mat-A 20PC 5 USD
Mat-B 10PC 10 USD
PLUS BCDCVDEcessHecessSAD = 26% are applied...
We do the Bill of Entry with MIRO for planned delivery cost to pay to the Customs Duties.
Next MIGO
Next MIRO for Goods/Service Items to pay to the vendot...
Issue is while doing the Bill of Entry MIRO can we change the Currency to INR?
Second issue is after the MIGO for both materials A&B, in the accounting doc it will show the values are inventorized for combination of materials.
I want to track the individual values of each material A&B for example
Mat-A-----20x5 = 100 USD + Duties (300 INR) = 40300 INR (if the exchange rate is 40Rs/USD)
How can I see and know the values on individual basis??
Thanks in advance
Shiva

Hi,
While doing MIRO for Bill Of Entry,u can change currency in Header Data of MIRO.
Whatever duties/delivery charges applicable are distributed amongst the line items if u have maintained separately in PO.
If they are maintained at header leve;,then they are distributed proportinally to every line item..
Regards,
Satpal

Similar Messages

How to maintain One product cost collector for multiple materials and configuration setting

Hi experts,
my requirement is that i want to maintain one product cost collector for multiple materials ans also i want to know the configuration setting for the same.
I have used KKF6N but it is not working in my case. I went through KKF6M also but there i found multiple cost collectors.
please guide me in the same.
Thanks in advance.

Hi Shripad,
you cannot assign same Product cost collector to different material.
Because you creating cost collector for material combination of material /production version,material /Bom Routing.
so please create individual cost collector for every material.
if you have any query kindly revert back.
Please mark the answer as helpful if it is helpful to you.
Because march 5 onwards scn has stopped awarding points to liked content.
Starting now: No more points for likes on comments/replies
Thanks & Regards
Sandeep Kumar Praharaj

Report sould support multiple company codes and currencies

Hi Experts,
I had requirement, my report should support multiple company codes and currencies. Right now it is supporting 2 company codes and currencies(EUR, USD) only. Now the report should support all copmany codes and currencies.
I had analyzed report. In the report there are class and authorization objects. In this authorization objects, they may be any chances of maintaining company codes and currencies? This is regarding PS Module.
Need ur suugestions to solve this issue...
Regards,
K. Bharat

Hi raja,
Could you share what you had to do to attain this functionality? I have the same requirement.
Thanks,
Kiran

Transfer order of multiple materials between WM and MM warehouses

Hi
i have a requirement to manage with a custom program or with standard transaction the transfer of multiple materials (KITS) between WM warehouse and MM warehouse and inside the same warehouse . How can i achieve this functionality
Can you advice ?
thanks in advance

can you describe in a more technical way what you mean by "movement between WM warehouse and MM warehouse"
Maybe you can give an example how you do that for a single movement

Standard Report to check consumption values for multiple materials

Hi,
Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
Thanks,
Swapnil

Dear Swapnil,
Report MCRE is widely used for the material cosnumption than checking in COOIS.
Also these reports can help you.
MCPF                 Material analysis: Dates
MCPO                 Material analysis: Quantities
MCPW                 Material analysis: Lead time
Regards
Mangalraj.S

Multiple Materials on a single object

I'm sure I'm missing something...but I'm finding it impossible to use multiple materials form the 3D toolkit on a single object unless I separate the material differences to separate objects....which I'm sure is crazy. But if I import an object with multiple materials, there seems to be no way to assign the toolkit materials separately. If I drag a toolkit material to one part of the object...the entire object turns into that material. It would seem it would be right if you dragged a toolkit material to the materials list of the object....but that won't work either. Anyone know what I am missing here?
Thanks in advance for any help

Right click on the object and select Tools -> Separate Meshes which will divide the object into it's component parts (i.e. parts that aren't part of the same polygonal mesh will be divided)
From there, you can apply materials to them individually.
To rejoin them (you don't have to) just select them all, then right click and select Tools -> Collapse Hierarchy.

Is it possible to combine multiple Pur Reqs for multiple materials to one vendor into one PO through MD07?

We have material planners who use MD07 (traffic signal screen) Stock/Requirements List, Collective Access tab to review material requirements by MRP Controller. Once the list is created, they select individual materials and review them in MD04. In a lot of cases, Purchase Reqs (PRs) are reviewed and adopted into POs individually for each material. Sometimes they will combine multiple PRs for one material into one PO. This is a good practice. However, from what I have found, it is not possible to combine multiple PRs for multiple materials into one PO. If this was done it would dramatically reduce the number of POs that we are issuing to suppliers. Problem statement: We issue too many POs which causes additional influxes down the line (receiving dock/goods receipts processing, receiving issues, invoices, invoice issues, etc.). Does anyone know of a way to address this problem without a major overhaul in approach or customization of the system? Thank you in advance!

Hello Michael
As far as I know, this is not possible directly from MD07, only from the MM transactions.
The following thread suggests the following procedure to convert several PRs into one PO:
Conversion of multiple PR into single P.O
Drag and drop the first PR from the item overview to the shopping card on top of ME21N,
then open the PO detail delivery schedule tab and drag and drop all other PR to the shopping card shown in the schedule tab
You can use the same procedure, calling the order conversion from MD07 and then drag and drop another PRs into this PO.
BR
Caetano

One inspection lot for multiple materials of purchase order line items

Hi All,
My client requirement is one inspection lot for multiple materials of purchase order line items.
Please share your thoughts.
Thanks in advance for early reply.
Regards,
Jishu

I totally agree with Amol.
I don't think I would touch that development nor would I ever tell a client it could reliably be done through development.
Knowing what I know about the table structures, I don't think you could create any development for this that could use a significant amount of the existing tables and functionality. I think you'd have to create all your own Z tables and basically rebuild the functionality. Tying it back in with SAP data will be difficult.
You're even looking at all custom screens for your results recording and UD as well. And if you have follow-on functions like batch classification requirements, batch determination, COA publication, results copy functions, use of DMR and sampling procedures, physical samples, quality notifications, etc. etc.. you could be looking a whole lot of development.
Craig

MD04 but for multiple materials

Hi,
Would just like to ask is there a standard report that lists down planning results for multiple materials?
It's like Stock/Requirements List (MD04) but for multiple materials....the info/fields I need are the ones found in MD04.
Thanks.
Best Regards,
Armie

Dear Armie,
You can't see MD04 details for multiple materials. Actually, it is impossible because MD04 is a screen designed for a single material.
However, if you want multiple material planning details, you would use
function LM61XU11 MD_STOCK_REQUIREMENTS_LIST_API to collect your own data and display it.
Regards,
Onat

Multiple inputs and outputs using DAQmx VIs

Hello,
I am fairly new with the LabView programming language. I have a few training books that I have been reading, and I have been following online tutorials and reading the forums. However, I have come to a problem where I don’t see a clear solution. I am using LabView 2009 (9.0f3) and DAQmx VIs.
I am using a NI 9172 chassis PLC, with two 9201 AI cards, 9217 AI RTD card, 9472 DO card, 9263 AO card, and two 9237 AI Bridge cards.
I am reading eight analog inputs with the 9201 cards, two analog RTD inputs with the 9217 card, three digital outputs with the 9472 card, three analog outputs with the 9263, and eight analog inputs with the 9237 cards.
I wrote a simple program to test one digital output task, two of the analog output tasks, and a single analog input task. I put all of them in the same while loop, and it worked perfectly. However, when I add analog input tasks to the same loop, I get an error 200022. So I tested each sensor individually by changing the channel before each run. I searched error 200022 and found that this is because I cannot start another analog input task until the previous one ends. With this said, I don’t know how to acquire an analog voltage in the same task as an analog RTD voltage. Both inputs take different constants in the start task DAQmx icon.
Attached is my test program. It is titled “Test All”. This is the program I used to test the various sensors. I tested the input sensors one at a time, and it worked fine. A few tasks are written just to test functionality, and will be added to later. The data is only displayed on the screen. I will add triggers and data write to disk functions later. This program works now, but if I add more analog inputs, it will generate the 200022 error.
Can someone show me how to correctly write the code for multiple inputs and outputs using DAQmx? All training materials and tutorials I can find all show a single input or single output, not multiples of each. Thanks for looking.
-Randy
Attachments:
TestAll-NI.vi ‏32 KB

Hi RandyC,
The Knowledge Base article Using Different Types of DAQmx Global Channels in the Same Task goes into a little more depth of what Bryan is talking about, and it also includes some example code to help show what to do.
Hope that helps,

Grey out rate and currency under conditions tab in PO

Hi Expert,
Is it possible to grey out the "rate" and "currency" field under Conditions tab in Purchase Order? If can, please guide me to the path.
Thanks.

Hello, crystal142,
SPRO -> Materials Management -> Purchasing -> Purchase Order -> Define Screen Layout at Document Level -> (choose the field selection, can be assigned to document type in Purchase Order -> Define Document Types) -> Terms of delivery and payment.
Kind Regards
TomT

Multiple materials input to planning board

Hi,
does anyone know if there is a way to specify multiple materials ( for instance thru copy/paste ) in the planning board MF52???
Any help appreciated !
danny

Hi Danny,
I don't think there is, but as you see, you could create a product group for these materials, and use it to access the planning table.
Regards,
Mario

MD03 for multiple materials

Hi Friends,
I want to execute MD03 with multiple materials (15 or 20 selective materials), also i want save this as variant and run every hour.
How could i make this? Any user exit is there to do this?
Please help.
Thanks
Srini

Hi,
You can use the User Exit: M61X0001
With this you need to get the Coding done from your ABAPer such that it will consider your Materials..
With this the criteria can be considerd is:
materials to be planned using MRP procedures,
materials of a certain MRP controller
externally procured materials or materials produced in-house
With MD01/MDBT you can use the User Exit Key (which you will define in OMIX) and Plan every houre as per your requirement..
Regards,
Siva

Manual TO for multiple materials

Hi All,
I want to create manual transfer order for multiple materials in a single TO, but when I use LT01 I have the option of entering only one material code. So, please tell me how can I create a transfer order with multiple material codes manually...
Thanks in advance..
Reg
Noopur

Hi,
In standard system you can use only LT01 and LT10 for creating manual TO. In LT10 you can select several materials (quants) at once (but e.g. you cannot change the quantity).
If you want something better, you have to go to development in my opinion.
Regards,
Csaba

Combined TO for multiple deliveries and multiple storage types possible?

Folks,
I would need to have 1 pick TO for a shipment which has multiple deliveries and materials that are stored over several storge type. With stanrd SAP this is not posible. Any ideas wether this can be achieved through a user exit?
Regards,
MdZ

Hello MdZ,
If you can suggest me regarding TO for Group...
Using VL06O (outbound delivery monitor); If I create the TO for outbound delivery, it prints the pick-sheet for each storage type.
But if I attach the delivery to u2018WM groupu2019 and then create the u2018TO for Groupu2019 using VL06O it does not create any pick-sheet.
If you can suggest somethingu2026
Regards,
JPS

Multiple materials and currencies

Similar Messages

Maybe you are looking for