Multiple Message Mapping with same Idoc, Sender and Receiver

Hi,
We have one Interface sending INVOIC02 Idoc from SAP R3 4.6C to SAP R3 4.6C through XI 3.0.
On Inbound side we are using SAP standard configuring one Partner Profile with inbound INVOIC MM process code INVL.
In customizing, we have defined one invoic type for the EDI partner.
Now we have to integrate another type of inbound invoic, but in customizing it's not possible to assign more than one invoic type to the same Partner EDI.
So, we have a restriction in SAP 4.6C inbound standard. On the other hand, we can't desing two Integration Scenarios in XI 3.0 with the same idoc INVOIC02, for the same sender service and receiver service because Integration Directory doesn't allow to create two interface determination for them.
We are thinking on using header mapping in XI (receiver agreement to avoid use the same EDI partner profile for the inbound invoic, but we can't assign the same client and technical system with the same ALE Logical System in SLD for two different business systems.
Does anybody have any solution for this problem, SAP side or XI side?.
Thank you
Best regards
Luis

Hi!
In XI configuration - interface determination, you can specify more than one Inbound interface. If you identify more than one, you get a new column where you specify condition (xpath) for selecting between the different inbound interfaces.
In 4.6c, you can have more than one inbound invoic for the same EDI partner profile, if you separate between them using message function. Just add a new inbound parameter with a different message function, or copy the one you have and specify another message function, i,e. "DIFF".
Hope this helps.
Regards,
Oeystein

Similar Messages

Can IDoc sender and receive system be the same client?

thanks.
I think one client can't assign to two logical system.so?

<i>Can IDoc sender and receive system be the same client?</i>
yes
Regards,
Prateek

Problem I-message? I can't send and receive the messages.

from last Sunday I have a problem with I-message. It's impossible to send and receive the messages. what's the problem?

I assume you have tried all of the troubleshooting here?
iOS: Troubleshooting Messages
It would also help to head to Settings -> General -> Date & Time and make sure it is set to Automatic. You could also try using Google's DNS servers as doing so has resolved the issue for a number of users. Head to Settings -> Wi-Fi and tap the > next to the network you are connected to. Scroll down to the DNS fields and enter in8.8.8.8and 8.8.4.4.
B-rock

Message protocol is different for sender and receiver JDBC

In File adapter the message protocol can be either FTP or NFS for both sender as well as receiver. but for JDBC adapter the message protocol is JDBC and for receiver adapter the message protocol is XML SQL Format or native sql string only. Why this is different ? Why cant we use JDBC as message protocol for receiver also ?
I thought JDBC is the message protocol for JDBC adapters irrespective of whether they are sender or receiver. Can someone throw light on this ?

Hi,
You can find more about JDBC scenario at following links:
Configuring the Sender JDBC Adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm|http://help.sap.com/]
[http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm|http://help.sap.com]
Configuring the Receiver JDBC Adapter
[http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm|http://help.sap.com]
[http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm|http://help.sap.com]
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d36d51d-0b01-0010-b3aa-9cb313b63cf4|https://help.sap.com]
Regards,

Can 2 people in different locations at the same time import, access, send, and receive the same messages from the same email account

I import messages into Thunderbird. I send and receive emails. One of the things I like about Thunderbird is that I can insert (image, link, etc) right where I want to, and I can Attach. But not just a simple attach file. No, I can also click Attach and choose Webpage. A lot of web-based emails are plain, simple, no frills - Attach file and that's it.
So I need to have my client be able to do the same thing I do when sending out emails, Namely sending out emails with an Electronic Press Kit (EPK) attached - which is to say, a webpage (not a pdf in our case). So, I need her to download, install, and use Thunderbird.
Here's the problem and my question. She needs to access, send, and receive from my email account. That would be easy if it was simple attach files - she could just login on the web, go to squirrel mail and bang it out.. Here it is: She needs to be able to import the messages to be able to reply to some messages - she needs access to what I have access to. She needs to use Thunderbird so she can take advantage of the features like insert image with link or attaching a webpage. My question is how will this affect my use? Can 2 people simultaneously and from different locations access and use the same email account or is it a case where her importing the emails would cut me off..Is it an either or thing? Basically, can her and I both import the emails or can they only be imported to one location at a time. Because every time someone sends me an email i get it right there on my Thunderbird application..it's imported to my Thunderbird..I want her and I to be able to do that without affecting each other. I don't want her to start importing to her desktop and then I can no longer import. If she says "point those messages to my computer what will happen to my ability to access them on my computer in the same manner I am currently?

I think there is a contradiction in your requirements. You want two people to share an account and you don't want either to interfere with the other.
The short and simple answer is to use IMAP to connect to the mail server. If your current email provider doesn't offer IMAP, find another that does. This is old technology already and it's disgraceful that some email providers haven't yet put it in place.
IMAP means that your messages are stored on the server and both of you will see exactly the same set of messages. And therein lies the contradiction; you will both see changes made by the other so you are inherently interfering with one another.
Caveats: some providers may not permit you both to access the account concurrently, and even if they do, things may become interesting if you both choose to work on the same message simultaneously.
Note that all of this is about email servers and protocols; your choice of Thunderbird as your email client has little bearing on the situation.

My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another.

My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
Thanks.

go to the settings and turn off imessage
but that don't change the issue that you will never be able to facetime eachtoher
the appleID is really meant as the handle that identify you it was not meant to be shared
but can see that people may want to do not buy apps more then once

Hello! Im having problems about my Iphone showing NO SERVICE on top. Im not able to send and receive msg, same with calls

Hello Guys! I hope someone could help me, Im having trouble with my phone's signal, I am not able to send and receive msgs, same as make calls and receive calls. At first, my phone is working fine (iphone 4, iOS 7.0.4) and all of a sudden, my text messages are not getting through, and I noticed that my phone shows NO SERVICE, I refreshed the phone by turning it off and turning it on after a couple of minutes, it worked. My phone is okay again after that, Im able to send and receive messages again. But after few hours, the problem came again. NO SERVICE sign is displayed again, but this time after refreshing the phone nothing good happened. I tried almost every possible thing I can to fix it but it doesn't work. What should I do.
Thank you

Hey Clara,
These are the recommended troubleshooting steps to resolve No Service issues on iPhone:
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Turn iPhone off and then on again.
Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
Update your iPhone to the latest version of iOS.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Restore the iPhone.
If you are outside the United States, please also follow these steps:
Go to Settings > Carrier > Automatic.
If the phone registers any carrier network, Settings > Carrier will be present.
If the Carrier option is missing in Settings and you are outside of the Unites States, please contact Apple for support and service options.
Set the option for Automatic to off.
A list of potentially available carriers appears after about two minutes. If the device is locked to a carrier, it may connect only to the carrier network to which it is locked. If the device displays carrier networks, then the device is working as expected.
Set Settings > Carrier > Automatic back to on.
If you're still experiencing No Service issues, contact your carrier to check for any network or account issues that could cause these symptoms.
from: iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
Welcome to Apple Support Communities!
Take care,
Delgadoh

On a iphone4, under settings, messages, send and receive, there are multiple phone numbers listed. How do I remove them? they are constantly checked even when i uncheck them. this is causing copies of my text messages to go to those phones.

on a iphone4, under settings, messages, send and receive, there are multiple phone numbers listed. How do I remove them? they are constantly checked even when i uncheck them. this is causing copies of my text messages to go to those phones.

Are you using the same AppleID for all those phones? If so, get them all their own AppleID.
KOT

Not receiving texts from iPhone contacts when I'm not connected to wifi or cell data. I can't send and receive regular SMS texts with non iMessage users but iMessage users message are not being converted to text when I don't have internet connect

I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.

I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

TS2755 Me and my wife r sharing the same Apple ID, with the conversion IOS7 all of a sudden my wife can read all my sended and received iMessages! What t.f is going on? I tried all kind of things, pls help

Gentlemen,
Me and my wife r sharing the same Apple ID, with the conversion to IOS7 all of the sended and received iMessages on my phone comes in also on my wife's phone! Tried all kind of things, pls help
Marco

Are you both using the same Apple ID?
What do you have here:
Settings > Phone > My Number > ?

SOAP Scenario-Sender and receiver having same structure- Mapping Required?

Hi,
We are having a SOAP to SOAP scenario. In that the sender and receiver are having same structure. Is it possible to by-pass mapping and just do the configuration from ID
Thanks and regards,
Siji Anup

Hi Siji,
AFAIK you can skip ESR development. Check the example in this blog When and how to create an scenario in SAP PI without mapping objects.
Regards.

HT3529 I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off? I can usually send the message, but often do not receive messages until I either have wifi or turn cellular on.

I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off and without wifi? I can send the message but often do not receive messages from others, iPhone or other, until I turn on cellular or wifi.

Depends on the type of Message.
SMS messages will send and receive with data off. and while you can guarantee you send using SMS you cannot guarantee that whoever replies to you does also. They may be replying thorugh iMessage if they are using iPhones.
However Android should be sending through SMS.
You can turn off iMessage if you want to, though people with limtied SMS text messaging in their plans may not appreciate it, and stop messaging you.

How would I import multiple Roadrunner emails each with multiple folders and continue to use my Roadrunner email to send and receive?

How would I import multiple Roadrunner emails each with multiple folders into Apple Mail and continue to use my Roadrunner email to send and receive from within Mail?

Try this.. Click the first in the CC field hold Shift, Click the Second Third, Fouth, Fifth and so on... click right Mouse select add to Contacts.

Is anyone having issues sending and receiving downloads with messages?

I downloaded messages. But I'm having troubles sending and receiving downloads from others.
My friend has messages as well and we can send small files, like mp3. But when I tried to send him a movie that's 500mb it says that the file is too big.
When I get incoming files to download (doesn't matter if the file is small or large), I click it and my aim automatically logs me off and then back on. So I can't even accept incoming downloads. Anyone have any fixes?

Hi,
I have one other thread where the person says there Login to AIM gets booted off when they try to accept Files in Messages beta.
Personally I have one Jabber Buddy who I cannot get Files from but they can send me AIM File Transfers.
I need to test with other Jabber Buddies to check this further myself. However I am not booted Off line.
I have sent Picture files in line and as free standing File transfers over AIM before, the largest probably being about 50Mb at a max.
I certainly have not sent a movie that big (I have sent smaller ones)
I have not come across a Limit before.
What do you see if you have the File Transfer window Open as well ?
This tends to show the sideways barbershop pole and a second downward arrow to start the download from there.
Mine fails when I click the arrow in the File Transfer window and until then it says Waiting.
The other thread has also tried Auto Accept with no luck.
At present I have not answers to this.
We have not tried Zipped files in the other thread.
9:53 PM Thursday; May 31, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Multiple Message Mapping with same Idoc, Sender and Receiver

Similar Messages

Maybe you are looking for