Multiple message problems

Hi everyone,
I have made a change in the way the mailing list distributes postings to the list.
Previously the Reply-To address was preset to [email protected] so
that replies to posting would get sent to the list by default. I think, however,
that this leads to "bounced messages" getting sent to the list rather than to
the list maintainer, at least with some mailers.
From now on, the reply-to address will be set to the originator of the message.When you reply to messages and you think the rest of the list would benefit,
change the address to [email protected]
You will now receive mail failure messages from certain sites, but at least these
won't reverberate back and forth as they do now.
Please give me your feedback after working with the list this way for awhile.
Thanks,
John
John Jamison
Sage Solutions, Inc.
[email protected]
(415) 392-7243 x508
fax: (415) 392-4030
http://www.sagesoln.com/sage.html

Michelmolder please try utilizing a different web browser. If you continue to experience difficulties then I would recommend reviewing Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to install Photoshop and Lightroom directly through the Creative Cloud Desktop application.

Similar Messages

Sender Proxy - Multiple Message problem

Hello,
I have a problem in a proxy process. I have a Sender Proxy which reads a file and sends it to PI. The file is converted into IDocs and sent to SAP ERP. The problem is that my mapping is splitting the file and sending multiple IDocs. So in my mapping I have Split template.
To the messages default the Messages and Message tags are added. The problem is when I sent my message from Proxy I am not able to add these Messages and Message tags.
Is there a way to add it? Or is it not possible?
Thanks.

>>I am not able to add these Messages and Message tags
Not very clear about the question.
As I understand you get extra message tags when you change the occurance of messages in signature tab of message mapping.
Have a look at the below blog for sending mutliple Idocs.
I guess, it would eliminate the need of message tags.
You donu2019t ave to change the occurance in Message Mapping . Just change the IDoc XSD as given in this blog
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change

C3-00 Multiple Message Deleting Problem.

Hi,
I brought the C3-00 yesterday.
The phone very nice in all respects.
The only problem is with sms deleting.
There is no mark option is given to delete multiple messages!
Why this is so?
I request Nokia to provide the answer and software update which solves this problem with wifi problem also.
Thank you.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

There is no more option in the inbox.
Only 3 options are given but not more?
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Multiple messages in one file problem (HL7 v. 2.3)

I'm new to HL7 ver 2.3 and am trying to receive a file that has multiple messages in it. I've been terminating each segment with a line feed (0D) and have been trying to separate each message with a carriage return also (0A). B2B is able to parse the first message into XML but the second message turns out tags like ><Extra-
MSH.6>20060817183112-0600</Extra-
MSH.6><Extra-
MSH.7>Security</Extra-
MSH.7><Extra-
MSH.8><Extra-
MSH.8.1>ORU</Extra-
MSH.8.1><Extra-
Am i using the wrong separator for messages?
Thanks,
Dan

Hello Dan,
As per 10.1.2.0.2 Oracle AS B2B, there is a support for one MSH. Please let me know.
Rgds,Ramesh

Cannot select multiple messages in a sequence diagram

In sequence diagrams, deleting multiple messages is tedious because multiple messages cannot be selected by using a selection rectangle.
1) If the rectangle contains a single message, its object is also highlighted. So when multiple messages are selected, the corresponding objects are selected.
2) If the selection rectangle overlaps a single line of the combined fragments box, the entire box is selected.
I could same time if Studio used normal CTRL conventions. In other applications, holding down CTRL has two possible results.
1) If the item to be selected is not highlighted, then that item becomes highlighted and is added to the selection group. Studio does this.
2) If the item to be selected is already highlighted, then that item becomes non-highlighted and is removed from the selection group. Studio does not do this. So I cannot use a selection rectangle, then selectively use CTRL to remove unwanted items from the selection.
Can anyone suggest a way of selecting multiple messages?
As a side issue, does anyone know how to remove individual items from a selection?

TreySpiva wrote:
Have you tried using the Shift key when selecting?It's the same problem. Selecting one or more messages also highlights the sending and receiving objects associated with the messages. Pressing DELETE at this point would also delete the objects.

In Earthlink Webmail, the "check all" and "delete" button for deleting multiple messages no longer function (although they work in I explorer).

When using the webmail application for earthlink email, the "check all" option to select an entire page of messages at once no longer functions. Same problem with the "delete" buttons that are located at the top and bottom of the page with multiple messages. Consequently, the only way to delete a message is to open the message and delete it in that view -- extremely tedious if there are a lot of messages.
This is a recent change, in the last few days. Everything works fine in I explorer. Earthlink support suggested I start Firefox in safe mode and restore firefox default settings. I went through the process on the help page. It didn't help.
I'll provide the earthlink link, but it is my email page that is the problem.

Same here.
- select multiple mails with the SEARCH option (manually selecting seems to work fine)
- click the move button
- list of folders appears (witn account & cancel options that both still work)
- click on a folder
- mail flies to this folder (animated)
- list of folders remains visible
- the cancel button does NOT work
- the accounts button takes you back to the root "directory" of your accounts
- in my case "live" and "exchange"
- this screen is a dead end. Clicking on both the account names and the cancel button do not work
A complete restart fixes the problem

Multiple message through FIle Adapter using XI 2.0

I have scenario to create multiple message using File adapter .My file structure will be like
EMPID     NAME     SKILLS
001     A      ABAP
001     A      XI
002     B      JAVA
Now I want to post first 2 records in one message and last record in other message.
Can we do it in XI 2.0.Any help appreciated

Hi Suraj.
Thank you very mutch for your reply.
Excuse me...my mapping is done for message type and idoc.
My problem is that when the interface start, on the sxmb_moni I see an error like this:
Creating Java mapping com.sap.xi.tf._MM_XmlOrderToIdocMapping_ --- Using MappingResolver with context URL //srvsapdev/sapmnt/CX1/SYS/global/xi/mapping/gestione_magazzini/7fa9c9e15a7811dab710f3e3ac10826e/ --- Load of com/sap/xi/tf/_MM_XmlOrderToIdocMapping_.class from //srvsapdev/sapmnt/CX1/SYS/global/xi/mapping/gestione_magazzini/7fa9c9e15a7811dab710f3e3ac10826e failed. --- Class not found: com.sap.xi.tf._MM_XmlOrderToIdocMapping_ --- java.lang.ClassNotFoundException at RUMappingJava.load(): Could not load class: com.sap.xi.tf._MM_XmlOrderToIdocMapping_ Class not found: com.sap.xi.tf._MM_XmlOrderToIdocMapping_ --- com.sap.aii.ibrun.server.map.MappingRuntimeException: at com.sap.aii.ibrun.server.map.MappingRuntimeException.code_STYLESHEET_OR_CLASS_NOT_FOUND
..where 'gestione_magazzini' is my namespace and 'MM_XmlOrderToIdocMapping' is my message mapping.
Can you help me to undestand the problem?
Thanks,
Gianluca

How to transmit multiple messages over CAN

Hi All,
How to transmit multiple messages over CAN ? With all three messages i want to send the system time & date also.
How can i get the timestamp in DBL format (Since the timestamp in the input of ncWriteNetMult.vi is a DBL). If possible kindly share the code in Labview 7.1 also.
Thanks in advance.
J

The NI-CAN driver brings examples for nearly every use case. Driver version 2.4 or later has the Write multiple function to write multiple frames at ones.
There is an example available for LabVIEW, CVI and VC/VBasic called CAN Transmit multiple.
Also check the attached VI and the Can manual: http://www.ni.com/pdf/manuals/370289m.pdf
What do you mean by converting Timestamp to DBL? Timestamp contains all date and time information. You can convert it into string format as shown below and then use the relevant data from it by string operations.
Hope this solves your problem.
Shreyas Hebbare
Shreyas Technologies
India
Attachments:
Transmit Multipe Objects at Different Rates_LV80.vi ‏36 KB

Sender Proxy to send multiple messages

Hello All XI experts,
I need your help to work for my scenario which is a Proxy-File .
I need to send data picked up from certain group of tables via sender proxy to XI.
The problem is that , we will be having thousands of records at the same time , so what we plan we can send the records via multiple messages in bunch of n no of messages rather sending the entire data in a single message.
Can you please help me in order to find a way by which we can achieve this in sender proxy ( to send multiple messages with each bunch having n no of messages ) .
Waiting for your expert thoughts and invaluable help.
Thanks,
Sunil

Hi
This scenario can be handled at abap end.
Decide the number of records you want to send in one file. In abap when the number of records reached then call the abap proxy method. For the remaining records again call the abap proxy method so while going to XI it will pass only the number of records desired by you.

One IDOC to multiple messages

Hi Experts,
I am working on IDOC to File Scenario
I have to send three messages using one idoc.
Could any one let me know whether is it possible to send with out using BPM or any suggest any other way.
Thanks in Advance.
Regards,
Vijay

Hi
If u want to send the three message at the receiver side then u have to make the occurence for the target is 0..unbounded. and use the 1:n mapping in the message mapping.
To make the 1:N mapping in the message mapping go to the messages tab and put the occurence for the target message as 0..unbounded. when u do this it will creath the multiple message at the receiver side.
Remember u also have to make the same changes in the interface mapping also.
To give differnt names to all the file u can use the Addtime Stamp option in the file adfapter so it will create the file with the name as time stamp.
If u still face the problem please reply me back.
Thanks
Rinku

Seeburger AS2 Adapter: Receiving multiple messages

Hi guys,
I'm having some trouble using AS2 Adapter for receiving multiple messages. The problem is really similar to Peter's problem.
Seebuger AS2 adapter for XI as sender for multiple messages
I have it configured for one scenario and it's working fine. The problem is when I'm trying to receive other messages for the same Party but different services. Meaning, I've one Party(example BMW) and several services (BMW_DE, BMW_USA, etc). I'm able to receive messages from service BMW_DE but when configuring BMW_USA I'm getting HTTP 403 Forbidden.
This error may have different reasons:
a) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
b) A valid sender agreement is missing.
c) There are more then one AS2 sender agreements with the same sender AND receiver party.
d) The corresponding inbound channel is set to inactive.
And the problem is that there are two sender agreements. Although the services are different, XI is not able to find the correct sender agreement to be used. After deleting the second second agreement, I'm able to send the respective message....
Can anyone give me a hint on how to solve this problem?

Hi,
this is done by different AS2 subjects. The sender agreement is selected based on this. So create separate AS2 receiver adapters for every message you need and put there different message subjects.
So if you'll have 3 AS2 receiver channels with subjects:
MessageType1_DE
MessageType1_US
the AS2 adapter will work like following:
first it tries to find an exact message subject, if it is found, message is "assigned" to this sender agreement. If no exact message matches the subject, then wildcards are used. (this mechanism is described in the Seeburger AS2 guide).
If you are getting 403 HTTP code, there may be also problem with authentication certificates.
Another problem may be, you don't have configured AS2 receiver channel for current subject.
Does this help you? Or you meant it another way?
Peter
p.s. check the answer above my post, Vardharajan's right
Edited by: Peter Jarunek on May 19, 2008 2:11 PM

Unable to select multiple messages in Mail.

Hi,
I can't select multiple messages in Mail app. After selecting few, all of them automatically deselects. This is really annoying. I'm on 6.1.2 iP5, and this is happening from the begining. Never happened before on my iP4. The other problem with mail app is that it keeps opening my "first on the account list" e-mail account, and please don't tell me that this is normal since it never happened before. Sometimes when I try to open a random account I see a black screen
see an image below.
Please help me as this is driving me crazy.

Camelot wrote:
to select all messages in the current mailbox you enter command+A. then use "apply rules" from the Message menu. you can also do it with just a few selected messages. select them, control-click on the selected messages and choose "apply rules".
Interesting interpretation of the OP's request.
I read the request as wanting to take one action that applied to many messages, rather than apply one rule many times.
For example, consider a rule that forwards the message to some other address. Selecting all messages and running the rule will generate multiple new messages - one per selected item.
that was my understanding of what the OP wanted. perhaps I'm wrong. let's wait for the OP to respond and clarify what he/she really wants.
Conversely, and how I interpreted the request, an AppleScript could collate all the selected messages and combine them into one new message - essentially running the 'forward' on many items at once.
I'll be interesting to see the OP's response to see which matches his requirements.
Message was edited by: V.K.

Mountain Lion Mail cant print or save multiple messages???

The question is not a question because I already know.....
Mountain Lion Mail obviously cant print or save multiple messages !
There are multiple threads about that, but I couldnt find any solution :
I want to export a full folder of mails (emlx) to single PDFs
and I want to have the Images displayed ! (Lion Mail could do that!)
saving as RTF just shows a link and not the image if it is just a linked image
and saving multiple mails doesnt work anyway. same for printing (and save as pdf)
did anybody run into this... maybe find another solution?
automator doesnt really help on this, too, and i dind find any tool.
word opens emlx files, but the image is displayed just as a 1x1cm thumb
that is really annoying !

I restarted the iMac and now it seems to allow this operation - so I consider this problem resolved for now.

Multiple message resend in Runtime workbench

hello experts,
Right now i m facing some problem to resend multiple messages at a time in the Runtime workbench.
If i get too many error message in Runtime workbench -> message monitoring then will anybody tell me that how i can send them at a time?
Please help me out in this case... because it is very difficult for my client to send messages one by one....
Thank you very much.
Regards,
Chaitanya.....

Hey experts,
Thanx for quick replies... but the matter is i m getting error in data... so i will not be able to get that message in error into the SXMB_MONI.
Suppose i have 2 scenarios... 1 related to invoice and 1 related to orders... now the situation is like if order will be present into my receiver system then only it will accept invoice otherwise my invoice message will go into the error... this error i will get into the RWB only.
so suppose first my invoice message come and it went into the error in RWB... and then order message went into the receiver... so now without change i can resend the message and it will give into the reciever system.....
so if i have nearly 50-60 msg in error then if i want to resend it once how i can do?
Hey i hv already tried that multiple selection option but it is allowing me to select multiple messages but it is sending only one message at a time...
So number of times i have to press resend button.... so please tell me if any other settings are required....
Thanks in advance...
Regards,
Chaitanya.............

Inconsistent behavior when selecting single or multiple messages

Mail seems very sensitive when selecting messages, either single or multiple. It often opens a message I have single clicked on (I do not use the pane) so that I could delete, and when selecting multiple messages for deletion or filing it often opens them all up as if i double clicked on the last one selected even though i didn't double click. This happens with both an external mouse and when using the trackpad button on my PB, and i have moved the double click settings all the way to the far right but that still didn't fix it. I have never had this problem with any other program, and I regularly select multiple messages in Entourage and never accidently open multiple copies.
I am glad that Mail warns you if you are up above a certain number so it won't accidently open 50 messages in 50 windows, but it is still annoying. Is there any fix for this or is Mail just extra sensitive to message selection somehow? I swear it opens messages sometimes with a single click though. Any thoughts/ideas/solutions are appreciated.
Thanks,
-Lewis

okay, i've just begun using Mail so perhaps it's just something that i am doing that i can learn to change, but if anyone else has experienced this and has any hints as to what i'm doing or what's going please let me know. it happens quite frequently and is very annoying. i gave mail a shot on another computer a couple of years ago and i don't remember if this happened or not, but this is the first time i've used it consistently.
thanks!
-lewis

Multiple message problems

Similar Messages

Maybe you are looking for