Multiple Message Selects; How?

In the Exchange Online Protection, in the Exchange Admin Center, protection, and quarantine area for releasing; how do select a group of messages or the complete selection? I seem to be able to select only one message of the 300+ as one at a time.
Brian O'Neill

Hi,
the EAC doesn't allow to select mulitpe quarantined e-mails.
Maybe you can do something with Powershell?
Greetings
Christian
Christian Groebner MVP Forefront

Similar Messages

How do you select multiple messages/conversations on SMS/MMS to forward or save to memory card on Samsung Stratosphere?

How do you select multiple messages/conversations on SMS/MMS to forward or save to memory card on Samsung Stratosphere?
My screen is cracked and I need to replace my phone and I don't see a way of selecting multiple messages or even conversations one at a time to forward them to email or to save them to a memory card. I can delete thread but can't forward it or move it. Is there a setting somewhere that will move the storage location for messages to the memory card instead of internal?
If not, any suggestions on backup apps? I have heard of Txtract to back up SMS and MMS messages, and Titanium Backup to back up everything (SMS, MMS, apps, app data...). Anyone have any experience with those, or other suggestions?
Thanks!
Rich

<Duplicate topic. This thread will be locked. Please see Help transferring data (SMS, MMS, Apps, App data) to new phone? for any replies.>

How to set a payload field value only once for multiple instances selected?

The user needs to set a payload field value and then he can approve the task so the task can continue through the process, that's fine when the user selects one instance and sets the value in the task details section and then clicks the approve button, but how do we achieve the same behavior in a multiple way?, I mean the user can select multiple tasks in the workspace (in this case the details task page is not available and instead the following label appear "Multiple tasks selected") then if the user clicks the Actions drop down -> APPROVE he only gets the message "your request was processed successfully", so how can the user modify the payload field value only once for all the selected tasks so when he clicks APPROVE the value is populated in all the instances selected.
Thanks,
Carlos.

In the action which displays the edit page just set the form idx value before displaying the jsp.

Cannot select multiple messages in a sequence diagram

In sequence diagrams, deleting multiple messages is tedious because multiple messages cannot be selected by using a selection rectangle.
1) If the rectangle contains a single message, its object is also highlighted. So when multiple messages are selected, the corresponding objects are selected.
2) If the selection rectangle overlaps a single line of the combined fragments box, the entire box is selected.
I could same time if Studio used normal CTRL conventions. In other applications, holding down CTRL has two possible results.
1) If the item to be selected is not highlighted, then that item becomes highlighted and is added to the selection group. Studio does this.
2) If the item to be selected is already highlighted, then that item becomes non-highlighted and is removed from the selection group. Studio does not do this. So I cannot use a selection rectangle, then selectively use CTRL to remove unwanted items from the selection.
Can anyone suggest a way of selecting multiple messages?
As a side issue, does anyone know how to remove individual items from a selection?

TreySpiva wrote:
Have you tried using the Shift key when selecting?It's the same problem. Selecting one or more messages also highlights the sending and receiving objects associated with the messages. Pressing DELETE at this point would also delete the objects.

How to edit the properties for existing variables in BEX query, so that I can get multiple input selections

Dear fellow developers,
I'm trying to edit an existing variable using BEX query, so that it can allow multiple input selections.
As you can see in the screenshot attached, the option is selectable during creation.
However, during editing of an existing field, this field (Details -> Basic Settings -> Variable Represents) is not selectable.
Does anyone knows why, and how to remedy this?

Yes you can do it at the table level.
Go to SE11 enter table name as RSZGLOBV.
Enter the technical name of variable in VNAM field..You need to change the value in VPARSEL column.
Please make sure to get the where used list of this variable so that you can know the impact,if something goes wrong.
Also change it in DEV and then transport across the landscape.
PS:Same thing has been described in this blog as well
Changing BI variable parameters
Regards,
AL
Message was edited by: Anshu Lilhori

Possible to select multiple messages in Mail?

I'm in the process of switching to Mail and am setting up rules. I want to apply a rule to multiple messages at one time, instead of applying the rule to each individual message, one by one. I cannot find a way to Select All or otherwise apply a rule to a bunch of messages (that are already in my InBox) all at once. Can anyone help? Thank you!

Camelot wrote:
to select all messages in the current mailbox you enter command+A. then use "apply rules" from the Message menu. you can also do it with just a few selected messages. select them, control-click on the selected messages and choose "apply rules".
Interesting interpretation of the OP's request.
I read the request as wanting to take one action that applied to many messages, rather than apply one rule many times.
For example, consider a rule that forwards the message to some other address. Selecting all messages and running the rule will generate multiple new messages - one per selected item.
that was my understanding of what the OP wanted. perhaps I'm wrong. let's wait for the OP to respond and clarify what he/she really wants.
Conversely, and how I interpreted the request, an AppleScript could collate all the selected messages and combine them into one new message - essentially running the 'forward' on many items at once.
I'll be interesting to see the OP's response to see which matches his requirements.
Message was edited by: V.K.

Unable to select multiple messages in Mail.

Hi,
I can't select multiple messages in Mail app. After selecting few, all of them automatically deselects. This is really annoying. I'm on 6.1.2 iP5, and this is happening from the begining. Never happened before on my iP4. The other problem with mail app is that it keeps opening my "first on the account list" e-mail account, and please don't tell me that this is normal since it never happened before. Sometimes when I try to open a random account I see a black screen
see an image below.
Please help me as this is driving me crazy.

Camelot wrote:
to select all messages in the current mailbox you enter command+A. then use "apply rules" from the Message menu. you can also do it with just a few selected messages. select them, control-click on the selected messages and choose "apply rules".
Interesting interpretation of the OP's request.
I read the request as wanting to take one action that applied to many messages, rather than apply one rule many times.
For example, consider a rule that forwards the message to some other address. Selecting all messages and running the rule will generate multiple new messages - one per selected item.
that was my understanding of what the OP wanted. perhaps I'm wrong. let's wait for the OP to respond and clarify what he/she really wants.
Conversely, and how I interpreted the request, an AppleScript could collate all the selected messages and combine them into one new message - essentially running the 'forward' on many items at once.
I'll be interesting to see the OP's response to see which matches his requirements.
Message was edited by: V.K.

My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an

My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that

Try this...
have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
That resolution came from another thread on this issue, and this did solve to poster's issue.

How to transmit multiple messages over CAN

Hi All,
How to transmit multiple messages over CAN ? With all three messages i want to send the system time & date also.
How can i get the timestamp in DBL format (Since the timestamp in the input of ncWriteNetMult.vi is a DBL). If possible kindly share the code in Labview 7.1 also.
Thanks in advance.
J

The NI-CAN driver brings examples for nearly every use case. Driver version 2.4 or later has the Write multiple function to write multiple frames at ones.
There is an example available for LabVIEW, CVI and VC/VBasic called CAN Transmit multiple.
Also check the attached VI and the Can manual: http://www.ni.com/pdf/manuals/370289m.pdf
What do you mean by converting Timestamp to DBL? Timestamp contains all date and time information. You can convert it into string format as shown below and then use the relevant data from it by string operations.
Hope this solves your problem.
Shreyas Hebbare
Shreyas Technologies
India
Attachments:
Transmit Multipe Objects at Different Rates_LV80.vi ‏36 KB

Dragging to select multiple messages in Mail 6.0 and OS 10.8

With recent software updates, there no longer seems to be a way to select multiple messages other than shift-click. I have always just dragged to select a number at once that I need to delete or move for one reason or another, which is much faster. what happened to the drag to select multiple messages in recent mail and OS 10.8 incarnations
Thanks

https://discussions.apple.com/message/19031608#19031608

How to handle the multiple message on the screen

I am new to j2me. I am trying to write a simple program for instant messaging. I want to write a program that to handle incoming messages. Now I am able to display one message at a time but I dont know how to handle multiple messages. Do anyone can give an example?
Is that anyway that pop up an indication for new messages in j2me?
Need yours expertise to help me. Thanks.

Use a custom canvas to display messages. Then you can do whatever you want with it!

Select multiple messages

Can I select multiple messages for deletion?
Solved!
Go to Solution.

Yes.
Scroll to highlight the first message, and then press the SHIFT key lower left and hold it while scrolling across adjacent messages. Press Delete.
Or scroll to any date separation bar and press Menu > Delete Prior.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Inconsistent behavior when selecting single or multiple messages

Mail seems very sensitive when selecting messages, either single or multiple. It often opens a message I have single clicked on (I do not use the pane) so that I could delete, and when selecting multiple messages for deletion or filing it often opens them all up as if i double clicked on the last one selected even though i didn't double click. This happens with both an external mouse and when using the trackpad button on my PB, and i have moved the double click settings all the way to the far right but that still didn't fix it. I have never had this problem with any other program, and I regularly select multiple messages in Entourage and never accidently open multiple copies.
I am glad that Mail warns you if you are up above a certain number so it won't accidently open 50 messages in 50 windows, but it is still annoying. Is there any fix for this or is Mail just extra sensitive to message selection somehow? I swear it opens messages sometimes with a single click though. Any thoughts/ideas/solutions are appreciated.
Thanks,
-Lewis

okay, i've just begun using Mail so perhaps it's just something that i am doing that i can learn to change, but if anyone else has experienced this and has any hints as to what i'm doing or what's going please let me know. it happens quite frequently and is very annoying. i gave mail a shot on another computer a couple of years ago and i don't remember if this happened or not, but this is the first time i've used it consistently.
thanks!
-lewis

Attempt to drag a message and Mail instead selects multiple messages

I used to be able to quickly grab a message and drag it to a folder. Now I have to click and hold before the message is grabbed. If I try to do it quickly, Mail instead begins selecting the message I am trying to drag and continues autoscrolling and selecting all the messages below it.
I drag messages to folders far more often than I select multiple messages, so this is not a boost to my productivity. It breaks a pretty basic user interface convention too. I hope this change doesn't make its way into the Finder!
For the record: Overall I am VERY happy with Snow Leopard.

Hi Ernie,
Thanks for the reply. You're right (as was the original "helpful"-marked post) - dragging directly sideways does work to avoid changing the selection. However, I have a full vertical screen of message folders and my messages being dragged are almost always at the bottom (I don't use a preview pane), and I know for sure that I never had to drag sideways before dragging up before Snow Leopard.
The problem is even worse on Apple's 30" monitor, as you might imagine.
I simply need to be able to disable this undesired "multi-select mail items in the list with the mouse" functionality that (to my years of use) was never there in the past. I'm betting there is some preference setting I could put in, if only I knew what it was.
Thanks,
Doug

How To Copy and Print Multiple Message Basic Header Info

Is there a way to highlight multiple messages and then copy, print or export ONLY the basic header info such as From/To/ Subject/Date/Time, etc?
I've tried several things but always get the entire message when I select and try to copy or print a list from the Inbox or other mail boxes.
I looked at this article that seemed promising:
http://email.about.com/cs/macosxmailtips/qt/et071803.htm
. . . but can find no such "print selected summaries" dialogue or option to do so.
Any suggestions?
This would be for a printed list of email headers such as one's secretary might give one or email to one as a "heads-up" of what's on tap.
JoeL
PowerMac 1.25 DP, 1TB HDs, 1.75GB RAM, Superdrive Mac OS X (10.4.6)

What I was hoping was that the features had been moved but were still available. Apparently now you can only copy and paste or print the entire message except if it's HTML in which case, that text cannot be coped from a header list.
Thanks!
JoeL

Multiple Message Selects; How?

Similar Messages

Maybe you are looking for