Multiple Meter Reads on the same day and Billing

Hi All,
There is a requirement to hold all reads received from Customer/ Meter Reader etc even they these are received on the same day for e.g. schedule read could be received in the morning, followed by customer read through internet and then another customer read through IVR system.
Can we store multiple reads on the same day?
If a read goes into implausible and then it's corrected, implausible read is replaced by corrected read. Is there any way to store old implausible read?
Thanks in advance.
SJ

Your questions answered below:
1. So my question is can we enter multiple reads to the Meter on a single day with same meter read reason? - Yes when we have MR reason which is not relevant to billing. In your case its 09 which is nonrelevant and you should be able to enter multiple reads with different time.
Make sure you supply time also when you are submitting your read. However there is a restriction of what level you can enter multiple MRs since SAP stores read at Minute level so you can not post 2 reads in same minute.
2. Are there any configurations to be done to allow multiple meter readings on a single day? - Not sure but standard SAP should allow you to save multiple MRs with the above rules.
Cheers
Jignesh

Similar Messages

Multiple leave requests on the same day

We would like to enforce a check so that multiple leave requests of the same type cannot be submitted for the same day on ESS.
How can this be achieved ? We are on EP 7.0 and ECC 6.0 and are using webdynpro java version of the ESS applications.
Any configuration available for this or does this require a BADI implementation ?
Thanks in advance.
Thank You,
Raj

http://wiki.sdn.sap.com/wiki/display/ERPHCM/ValidationsforESSLeaverequest
read here, it requies a badi implementation only, no config is available!
You have to call backend exits from the badi of leave request
Edited by: Siddharth Rajora on Aug 2, 2011 7:48 AM

HT4060 My iPad Mini and My iPhone 4s stopped charging when plugged into and outlet. On the same day and i've tried numerous adapters . It will charge when turned off only or plugged into a computer

My iPad Mini and my iPhone 4s stopped charging on the same day when plugged into an outlet if they are turned on. My phone charged as long as it was turned off and it will charge when pluged into an USB port,
Anyone else have this problem?

Youngsavage6oo wrote:
I have had my iphone 4s for only a couple months and it was charging fine and I unplugged it and when it got low I plugged it back in and wouldnt charge so I tried plugging it into the computer and its chargeing but I dont know what to do I need help
Its charging, whats the issue then?

I am being charge repeatedly on the same day and r...

I have just been notified in three emails that I have been charged $7, $14 and $35 in subscription renewals on the same day. I have not used Skype today, so either my account has been hacked or your system is broken. Please revert immediately and fix this, applying refunds. Thank you.

Charmaine777 wrote:
I have just been notified in three emails that I have been charged $7, $14 and $35 in subscription renewals on the same day.
Hello
Your account shows that these charges are not Subscription renewals. The $7 charge is an Auto-recharge on low credit balance and both the $14 and $35 charges are for credit purchases.
Escalated within Skype for review.
p.s. no duplicate posting please. Duplicate removed. Thank you.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Multiple Threads writing to the same stream and "Write End Dead"

Hi, I'm wondering what is the proper method for having multiple threads write to the same stream.
Right now I have PipedWriter that I give to several Threads.
However the JLS specifies that when the thread writing to PipedWriter dies, an exception will be generated. Does it mean that I may get a "write end dead" exception when any of the threads dies?
More specifically I'm trying to extract keywords from a set of pages and print out keywords with their contexts (using threads to avoid a single blocked pages from blocking entire process)

Your topic says "stream" but your post says "writer" - there's a difference. Readers/writers use the native encoding (which is correct if, for example, you're reading .DOC files created in Windows) while streams use UTF-8 encoding (which is correct if you've got one java app talking to another).
Multiple threads can output to the same source. You've probably seen really annoying examples as your own System.out.println()s get intermixed with other JVM output in the JVM's window. Synchronization is going to be a serious issue.
As to the exception, why not just catch it and ignore it?

Multiple users working in the same document and same time.

Hello Guys,
and thanks for looking into this
At our company we're still in doubt wether or not to update our software to CC or just update to CS6. Currently we all have different versions (going from CS3 to CS5), and that's really time-consuming.
The most important question would be if it is possible in the CC to work in the same file at the same time.
Working on magazines, catalogues or books this would be a major time-saving option!
For example I could work on chapter 1 and 6, whilst my collegues are working on the other chapters.
The other users could then see how far I am on my chapters, change things (make notes) etc.
Is this possible in CC or not?
Thanks for your answers and time.
Best regards,
Sam
PS: If there are major setbacks working on the cloud (between multiple users/computers) please let us know.

Let me attempt an answer.
Short answer, no. Multiple users cannot edit a the same file at the same time.
You'll need a content management system, to enable check in/check out, prevent overwrites etc. But (there's always a but), Creative Cloud offers several workflows and tools that can be used to help streamline multi-user publication workflows.
Using Creative Cloud will ensure that all users will be on the same version of the software, and there won't be any accidental lockouts due to format changes, and no need to run arounf to get the document downsaved. All users also have access to the latest features as soon as they become availble.
For products, such as books and magazines: InDesign needs to be the primary software that you use. When you design the content architecture of your publication, you can employ the following techniques and tools:
Break up your publications into several INDD files, let's say for file for each story.
Compile the individual files into an InDesign book.
Link Ps and Ai or other files when you place them in the InDesign layout. That way whenever a designer updates an asset, InDesign will notify you that a linked file has changed and you can choose to update the link.
InCopy was recently added to the Creative Cloud. Authors can can edit stories without actually having to open the InDesign files. For details see the InCopy help. InCopy has several workflows that can help out in this kind of setup.
Other than the Creative Cloud apps, you'll also need to setup folder and directory structures on the shared storage location.
Setup a shared location/drive so that all users have access to the linked files.
Control read/write access to individual files using the OS commands on the file directory/server. For example, Layout designers only have edit permissions on the layout (indd files); while Photographers can only edit .psd files, and so on. For small teams this might not be necessary, but for larger teams this may help.
You could also consider storing your files using a Content Management System. You'll need to evaluate the cost and benefits properly.
Hope this helps.

Multiple language data in the same table and indexes

We have 8.1.5 database with
NLS_LANGUAGE=ENGLISH and NLS_TERRITORY=UNITED KINGDOM set at the database level. We also set the NLS_LANG appropriately when we index the data. We also use the preference setting BASE_LETTER=YES when indexing.
Our tables contain book titles which is what we index using interMedia. Being an online book store, this table may contain titles in English (most of the titles are in English being UK) and some titles in French. Please note the French language has accents and diacritics. Normally in a French database with NLS parameters set correctly and BASE_LETTER=YES, if we search for a title with accent / diacritic it will return the record correctly and match the rows with or without the accents (e.g. searching for video will return both vidio (not the accent on e) and video). However, with the UK settings the accents are not ignored during indexing and it only returns the records that exactly match the search word (e.g. searching for video returns only video and searching for vidio returns only vidio (note the accents on e in the last two videos)).
Question: Is there any way to appropriately index multiple language specific titles in the same database? If yes, how? Is it possible at all? Suggestions, ideas are welcome.
null

Similar request; if there are several different languages used in a database, but a search word can be typed in by anyone and not necessarily in the default language, I still want to be able to pick up all the records (including text in blobs) in any language where my search word = the equivelant word in the other languages; eg. searching on "tree", the search would bring back a document that contained "l'arbre". I then want to set the default language, and allow the user to select a "search in these languages" option to expand the search from the default "tree" to all languages in the database.
I know about the multi_Lexer but does it extend functionality to this level?

HT1688 I have pictures on my camera roll that when I try to click on them the only thing I get is a white screen. I took about 10 pictures on the same day and in the middle of all the pictures it has about 5 that come up white when I try to click on them.

I recently took pictures at a family outing and all the pictures appear on my camera roll but when I click on about 5 of the pictures they all pull up as a white screen even though I can see the picture on the camera roll. How do I get these to pull up when clicked on ? I have completely shut the phone off twice thinking this would reset pictures but it has not made a difference. What can I DO??

My sister's 5s is having the same issue since yesterday.
Neither resetting via holding home+power buttons helped, nor the "reset all settings" in the settings. The only option left is erasing the iPhone and setting it up as a new phone ( or restoring from a backup?)

Post multiple bank statements on the same day

The processing of electronic bank statements on a daily basis had to stop so that a more critical issue could be fixed. Now that I am two months (April and May) behind and the critical issue has been resolved I would like to catch up with the processing but not post the statement back to the original statement date in April or May since the GL Cash accounts have been reconciled for those previous months. I want to start processing as of June but I receive an error indicating that the "statement already exists; entry ignored". The system is evidently assigning a statement number to a particular date and not allow more than one statement to be processed in a single day. Is there any way to post more that one statement on a single day using tran FF_5 or any other way? I have already tested altering the date within the bai text file.

Since only one bank statement can be processed per day, I had to go back for the two months I was behind and process the files day by day until I got caught up to being current.
If I really needed to process many bank statements simultaneously, I could have created one bank statement manually and add all transactions and bai codes from many days and process that bank statement on a weekend date that would not be used by another statement date.

Scanning Multiple Photos All at the Same Time and Saving It in Individual File Names

Printer : HP Officejet 4500Advantage All-in-One Printer-K710g
Problem: I used to scan 5 multiple pictures all at once and save those in 5 individual files. I cant do that anymore. it scans as a whole picture. can somebody help? thanks.

Hi @kmjamj
Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HT1212 My child locked out her ipod touch wich she recived yesterday for b-day. It just so happens we installed a new pc the same day and do not have itunes access. How can I unlock the device?

Kid locked ipod. New CP at home. Unable to sync to itunes. how do i unlock?????

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT204053 I have multiple apple devices, 2x phones ipad etc, but all are through the same email and I only get the storage space for one device, what should I do?

I have multiple devices all under the same id and email but I don't get multiple icloud storage space and it's running out!
Can anyone help as I've just bought an iphone for my daughter and would like to link it as well.
Thanks in anticipation of your help.

One icloud account gets a 5 GB of storage, regardless of the number of devices connecting to it. But you're in luck, you can buy more storage for the account if you are running low.
As for your daughter, be sure to get her own icloud account, otherwise she'll end up getting all your email, contacts, etc. And if she deletes any of this data, it will be deleted on your devices as well. Note: you can all keep using the same ID for the itunes store for sharing purchased items.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/

RE: multiple named objects with the same name andinterface

David,
First I will start by saying that this can be done by using named anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get most of the
behavior you desire. When you do a lookup in the name service (BindObject
method) it will first look in the local partition and see if there is a
local copy and give you that copy. By anchoring the object and manually
registering it in the name service you are programmatically creating your
own SO without defining it as such in the development environment. BTW in
response to your item number 1. This should be the case there as well. If
your "mobile" object is in the same partition where the service object he is
calling resides, you should get a handle to the local instance of the
service object.
Here is the catch, if you make a bind object call and there is no local copy
you will get a handle to a remote copy but you can not be sure which one!
It end ups as more or less a random selection. Off the top of my head and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There are two
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value to
remote objects), cannot safely reference a Service Object unless it has
environment visibility, but this forces the overhead of a remote method
call when it might not otherwise be necessary. If it were possible to
place a copy of the same Service Object (with user visibility) in each
partition, the overhead of a remote method call could be avoided. This
would only be useful for a service object whose state could be safely
replicated.
2) My second scenario also involves mobile objects referencing a Service
Object, but this time I would like the behavior of the called Service
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same name
and the same interface in each partition, but varying the implementation
with the partition.
Does anyone have any thoughts about why this would be a good thing or a
bad thing?
David N. Foote
Consultant
Get Your Private, Free Email at <a href=
"http://www.hotmail.com">http://www.hotmail.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

David,
First I will start by saying that this can be done by using named anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get most of the
behavior you desire. When you do a lookup in the name service (BindObject
method) it will first look in the local partition and see if there is a
local copy and give you that copy. By anchoring the object and manually
registering it in the name service you are programmatically creating your
own SO without defining it as such in the development environment. BTW in
response to your item number 1. This should be the case there as well. If
your "mobile" object is in the same partition where the service object he is
calling resides, you should get a handle to the local instance of the
service object.
Here is the catch, if you make a bind object call and there is no local copy
you will get a handle to a remote copy but you can not be sure which one!
It end ups as more or less a random selection. Off the top of my head and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There are two
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value to
remote objects), cannot safely reference a Service Object unless it has
environment visibility, but this forces the overhead of a remote method
call when it might not otherwise be necessary. If it were possible to
place a copy of the same Service Object (with user visibility) in each
partition, the overhead of a remote method call could be avoided. This
would only be useful for a service object whose state could be safely
replicated.
2) My second scenario also involves mobile objects referencing a Service
Object, but this time I would like the behavior of the called Service
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same name
and the same interface in each partition, but varying the implementation
with the partition.
Does anyone have any thoughts about why this would be a good thing or a
bad thing?
David N. Foote
Consultant
Get Your Private, Free Email at <a href=
"http://www.hotmail.com">http://www.hotmail.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Changed sequence settings to match source footage but only half footage now matches even though they're from the same camera and same aspect ratio

My source footage is 1920 X 1080 from a canon 60D. I changed my sequence settings to Digital SLR 1920 X 1080 to match. On the program window I have it set at "Fit". Only about a quarter of my footage now fits the program screen and looks to be the matching aspect ratio. The rest of the footage when on "fit" fills a tiny portion of the viewing window so it appears they don't match the sequence settings. I don't understand why this is happening because this footage is from the same camera, shot the same day, and have the same aspect ratios.
Can anyone tell me why this is happening and how I can fix it??

First of all, the setting that you mention is on Fit is the Zoom Level of the Program Monitor. It controls only how the sequence is shown in that monitor; it has nothing to do with how any sources are handled in the sequence.
Please provide the following information:
Exact version of Premiere Pro
Exact version of operating system
Graphics card and driver
Also, please post a screenshot showing the following
Project panel with the Video Info column visible
the Timeline visible
one of the problematic clips selected and the Effect Controls panel visible, with the Motion section twirled open.

E4200 v2 - Uses multiple MAC addresses for the same device

This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
Seems the V1 had the same issues that they did not fix on this.
The Cisco connect software shows 5 devices the Web based utility shows 3??.
Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
Secondly, may I know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

Multiple Meter Reads on the same day and Billing

Similar Messages

Maybe you are looking for