Multiple monitors from MBP

I have just bought a new monitor for my MBP running through the DVIX slot to hdmi, if I wanted to buy another monitor and have that hooked up aswell do I need to get a splitter or something or is it just software that would do it and if so what socket would I plug it into? I've heard of displaylink and matrox just searching this topic.
I'm running a 17" MBP 2.4 IC2D 4GB ram, with the GeForce 8600MGT graphics card. Thanks in advance.

Depends on what you mean by multiple monitors. You can use a splitter for mirroring (showing the same thing on both external displays). But, if you want to span (i.e. extend the desktop across both displays) then you need additional hardware.

Similar Messages

Can i run multiple monitors from time capsule?

Is it possible to run multiple monitors from a single time capsule in our small office (3 users)?

My understanding is that you have the ability to. However, you might end up with a slow server.

Running 2 monitors from MBP

Sorry if this has come up before--I'm not very good at searches but I did have a go at it.
I want to run 2 relatively new Samsung 23" monitors from my MBP with the internal monitor off. How easy/hard is this going to be? What parts will I need?
Thanks

Hi Justin,
the Matrox Dualhead http://www.matrox.com/graphics/en/products/gxm/dh2go/ seems to be capable of doing this http://www.matrox.com/graphics/en/products/gxm/dh2go/faq/#3
Regards
Stefan

2 monitors from MBP?

Is there any way to run 2 external monitors from a single Macbook Pro with the unit closed? (so the external 2 monitors would be the only 2 monitors on)
Thanks

Hi Justin,
the Matrox Dualhead http://www.matrox.com/graphics/en/products/gxm/dh2go/ seems to be capable of doing this http://www.matrox.com/graphics/en/products/gxm/dh2go/faq/#3
Regards
Stefan

No 1920x1080 output to external monitor from MBP 2011 OSX 10.6.8

Hi, I have a MBP 2011 running OSX 10.6.8.
I have recently purchased an Asus ML249H Monitor and the Kanex Mini DisplayPort to HDMI Cable 10 ft (3 m) MDPHD10FT.
The monitor should display at 1920x1080 natively but does not. The MBP max output resolution is 1600x900 on this screen. Is this a known issue with the MDPHD10FT cable or is it OSX? What it the work around to get 1920x1080.
Thanks

i had to go into iCal Preferences and delete my account and then put it back in. Everything is working fine, now.

How to display 2560x1080 on external monitor from MBP or MBA?

Is there any way to make MBP 17 (Intel HD and nVidia GT graphics, SnowLeo) or MBA 13 (Mountain Lion) display 2560x1080 on external monitor (LG 29" ultrawide)? My MacPro with RadeonX1900 card (10.5.8) does it perfectly but I cannot find a way to get the laptops to do it. Tried res. switching apps, still no good. Thanks.

It worked perfect for me. Maybe settings should be different for your laptops. In my case I'm using a MBP 15" with a GeForce 330M.
The monitor I have is the LG 29EA93 (21:9) @ 2560 x 1080.
Make sure you have exactly same values in Switch Res X. Special attention to "Scan rate".
You can see in the capture below that it's working
and, just in case, here you have the settings that worked for me
It might be also different for each video card...
Greetings!!

Output / Multiple Monitor from MacBook Pro

I have a question. I am working with live video production and we want to have our presentation (similar to PowerPoint but a professional live presentation software) sent to two different monitors. The monitor is being sent via thunderbolt then via HDMI out to a projector, but here is the difficulty, we also want to send the same image to a second MacBook Pro which is running our live video switching software, so that we can mix our original presentation into the live video stream when necessary. Does anyone have an idea how we can get the presentation from the first computer onto the second computer? It should be the full-screen image exactly matching that from the projector. One more comment, I am not sure if a simple HDMI splitter will work because maybe the second MacBook Pro won't recognize the input as a monitor. Thanks so much.

Activate Screen Sharing on the computer that's giving the presentation and connect to it from the other computer. You will have to use the projector in mirror mode. The presentation software should be running in full-screen mode.
OS X Yosemite: Screen sharing overview
OS X Yosemite: mirroring

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

Hall Palm Desert,
if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro.

Can I run an HDMI monitor from the Firewire port of my MBP?

This may be a strange one
I am running a late 2011 17" MBP running Mavericks (latest version as of July 2014).
Currently I have a 4TB external thunderbolt drive attached. There is no thru port.
My challenge is, I want to connect an external HDMI monitor, but this MBP only has the one Thunderbolt port, being used by the external drive.
My hope is, that somehow, I might be able to MacGyver something using the Firewire port since I cannot afford another monitor with a TB through at the moment....Technically the cabling would be possible, albeit a bit freakish.
Something like:
Firewire cable out from MBP, plugged into a FW to Thunderbolt converter, thunderbolt converter tip plugged into a MiniDisplayPort to HDMI converter box (like the Monoprice MMP-MDP2H01), then from there to the HDMI monitor.
Would the MBP detect the monitor and route the video signal through the FW port accordingly?
Looking forward to some expert advice and any zany workaround suggestions you all might have!
Respect.

The MDP to HDMI will work fine.
Captfred

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere.

You cannot shadow a session with multiple monitors enabled in Windows Server 2008 R2

Searching through the forums (and according to KB2484290) it appears that there is no solution to this problem. We are rolling out thin clients that are using dual monitors exclusively and we were very surprised to find out that we couldn't shadow
sessions with dual monitors (which to us means that we can't shadow ANY sessions). This now completely changes our approach to managing these devices.
We are running Windows Server 2008 R2 SP1 with Remote Desktop Services installed. The thin clients are running Windows Embedded Standard 7 with the latest updates / RDP client. All steps have been followed to ensure that the apropriate settings and
permissions have been set up to allow access into the session.
We tested by unchecking the RDP setting “use all my monitors for the remote session”, with that setting disabled shadowing worked
Questions:
1. KB2484290 is from Dec 2010 - It's now April 2012, is there a workaround / hotfix for this issue that will allow us to shadow sessions using the native Microsoft tools?
2. Are there any recommended alternatives (software)? Free/Paid - doesn't matter we just need something that will work. I'm sure there are a few options out there but I am looking for suggestions for what people have used in the past that worked
best for them to help us narrow down the choices.

Hi,
In my experience, so far, the workaround is Remote Assistance, Remote Assistance supports multiple monitors, and is the presently recommended solution if you need this functionality. Remote Assistance is a Windows Server Feature that must be explicitly installed
on Windows Server 2008 R2; it is already installed with the client versions of the operating system.
More information:
Remote Assistance Overview
http://technet.microsoft.com/en-us/library/cc753881.aspx
Remote Assistance and Resulting Internet Communication in Windows Server 2008
http://technet.microsoft.com/en-us/library/cc770456(v=ws.10).aspx
As far as I know, there are some third-party tools can be used as the solution, such as Teamviewer, ISL Online, etc.
Please Note: The third-party products discussed here are manufactured by companies that are independent of Microsoft. We make no warranty, implied or otherwise, regarding
these products' performance or reliability.
Regards,
Dollar Wang
Forum Support
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Technology changes life……

Wanting to use multiple monitors on HP hpe210Y w-DVI-I and HDMI. Audio: 5.1 Surround

I have a HP Elite hpe210y with only two outputs of which are: 1) DVI-I and 2) HDMI. My situation is that I have 2 new HP Monitors with VGA Cables. I have an adapter for DVI-I to VGA and also VGA to Dual VGA. I do NOT want the monitors to work as Duplicates however. I want the second monitor to be an extension. I am also interested in getting even 2 more monitors in teh near future for a total of 4.
Is there some way I can get two monitors to work off one DVI-I ?
Will I be able to upgrade to up to 4 monitors?
Is there a part I need?
Wanted to mention that my OS is Win7 Home Premium 64 bit. I use IE9, Chrome and Firefox
I would of never bought this from Best Buy if I had known in advance that there was just the one regular output. I see they have one called a Phoenix which I may look into.
Thank you in advance for your time and consideration.

>Is there some way I can get two monitors to work off one DVI-I ?
I've not yet seen a solution for that.
You can use a hdmi2vga adapter for the second port.
>Will I be able to upgrade to up to 4 monitors?
>Is there a part I need?
you can try one of these:
http://www.evga.com/products/pdf/100-U2-UV19-TR.pdf
http://www.amazon.com/Kensington-Universal-Multi-Display-Adapter-Black/dp/B002F9NSMQ/ref=pd_cp_e_1
http://aluratek.com/usb-2-0-high-resolution-vga-adapter
They will use your current graphics device.
If you are looking for a new solution - I've read about DisplayPort version 1.2 that can do 'daisy-chain connection' with multiple monitors. But this you have to 'google' yourself.
HTH
V.
*** Say 'Thanks' with Kudos ***

Imac multiple monitors

Hi
I have a weird startup problem on my iMac 27". It boots past the apple logo and blue screen but then I getaway white screen with random grey checkers all over the place!
I had issues with my snow leopard install which we're fixed after a fcsk command.
For some annoying reason I can't boot to a different USB or flash drive as I don't get past the mac logo!
Any help would be appreciated

Sorry nothing to do with multiple monitors!! My 1st post, don't know where that came from!

Feature Request - Better Multiple Monitor Support

Lightroom's support for a second display has definitely helped my workflow. I hope the team will consider adding more flexible multiple monitor support in version 4. Here's why.
I've recently experimented with running one of my three screens in portrait mode. When this screen hosts Lightroom's secondary display window in Loupe view, my verticals finally get equal real estate for editing. While I've not done hard statistics on my library, I know more than 50% of my imagery is in portrait orientation.
I'd like to see LR V4 support three or more screens so I could set up as follow:
Screen 1 - main lightroom interface, would not need to be calibrated, for controls and navigation
Screen 2 - Portrait orientation, loupe view - this would be a calibrated display, all develop changes to verticals would be judged on this screen
Screen 3 - Landscape orientation, loupe view - another calibrated display, all develop changes to horizontals would be judged on this screen
If Adobe could make the app intelligent enough to route the image to the correct screen based on orientation (recognizing and respecting cropping that could change orientation) my edit sessions would certainly speed up and I could maximize the productivity of multiple screens.
I'd be happy with this, but I'm also stymied by the need to switch back to Library mode to tag images when my primary workflow has me in develop. Ultimately everything depends on the quality of the image. Before I invest in image-specific meta data, I have to process or at least "test-process" an image. IMO the Quick Develop panel is useless, once you become accustomed to the granular control of the develop sliders, it just doesn't cut it.
In the three monitor setup I described above I'd love to be able to configure screen 1, with a combination of panels from Library and Develop, so I could stay "develop centric" with immediate access to keywording and meta. The two additional screens would intelligently handle image display.
I think this might speed my workflow by 33% and having just returned from a Tour de France project that generated 23,000 images I need all the productivity help I can get.

VeloDramatic wrote:
Thanks for all those votes Rob. Now we just need to get the other 999,999 on board.
Actually, this topic has come up a lot on this forum. At this point, I think we just need to get Adobe on board.
VeloDramatic wrote:
There may be another thread for this one additional thought. If Adobe does improve multiple monitor support, we should be able to optimize our previews for those screens. Even after prerendering 1:1 previews there are issues with DEVELOP doing its own thing (I believe) each time a new image is loaded. I make extensive use of the PREVIOUS button moving through my shoots and there's always a lag of one or two seconds while the develop preview loads before the button is active. In a desktop environment where multiple screens allow landscape and portrait images to be displayed full screen I'd argue that 100% of the host screen resolution would be the ideal preview. Hope that made sense.
Yes, faster switching would be nice. I'm not sure what that would take. As it stands, there's like "9" previews generated when you do 1:1s - 100% down to tiny thumbnails. Still, one at exact monitor size that does not need to be resized at all does seem like it would be the fastest - I'm a bit on a limb though at this point.
Rob

High PPI Support Multiple Monitors: How it comes that Remote Desktop implements the hight PPI support very well and win 8.1 doesnt?

http://skovalev.de/wp-content/uploads/2014/05/RemoteDesktop-HighPPI-Perfect.png
Hello all: i am using an High PPI Monitors from Dell XPS15 (3600x1800) and a Normal FullHD above it. The FullHD monitor is an external device and is set up as the primary device. Scaling is set to per Monitor DPI.
Now the Question: how it comes, that my RemoteDesktop on the secondary (internal) screen has almost perfect implementation for this????
BUT i am am talking only about the RemoteDekstopManager, normal one does not works with high ppi in this way... Also ModernUI has no problems with scaling
http://skovalev.de/wp-content/uploads/2014/05/Firfox-and-Resolution-RemoteDesktop.png
NOTE that the resolution on the remote desktop is set to 1600x900 and there are NO scaling problems even on the 3200x1800 monitor!
On both picutures you find the dell monitor on the bottom and the scaled original windows explorer/firefox on the bottom right. See how blurry it is? I really breaks my eyes :(
I hope Microsoft can finally fix the high PPI Monitors issue, since the solutions seems to be already implemented

No, i mean the Scaling Support.
If you use multiple monitor, in windows 8.1 you can scale per monitor. If you use this option with a High PPI monitor, like ultra HD or 4K, the image on the monitors with other PPI than the main monitors appears fuzzy and blury.
But there are also scaling problems even if you use only single monitor. This article blog describes it pretty good:
http://www.hanselman.com/blog/LivingAHighDPIDesktopLifestyleCanBePainful.aspx
By the way there are lot article like this describing the scaling problems, not only by users but also by professinals and IT magazines...
BUT here it comes: watch @ my screenshots. If the remote desktops resolution is 1800x900 and the native resolution is 3600x1800, there are no scaling problems! HOW? So like you can see on my screenshots a native application on my monitor appears fuzzy while
the same application runnin of the remote desktop has clear type!
That means for me, that windows HAS the possibility to scale clearly, but somehow this feature is only supported by RDCM...

Multiple monitors from MBP

Similar Messages

Maybe you are looking for