Multiple monitors - P6 PRO application is a published app through Citrix.

We require the ability to spread the P6 Pro client application across multiple monitors. This is no issue for a local P6 client install but CSX is a Citrix shop with P6 pro published as an application through Citrix, not locally. Our current Citrix configuration doesn't allow for maximizing BOTH monitors, only 1 monitor will work.
Please see attached screenshot.
Is there a way to have P6 PRO work using 2 monitors as a Citrix deployed application ?

Out of the box the palm is able to sync to two software packages Palm Desktop and Microsoft Outlook.
Using Outlook you can set up multiple palm profiles that can sync to the same Outlook profile and have the Outlook profile controlled by the server, this way you can add data to the server and it will port over to Outlook.
Outlook would be set up normally "set up to connect to a server" and then when the palm desktop is installed and set to sync to Outlook all the Palm profiles will sync the Outlook data.
As far as network syncing it is just another way to get to the same data as apposed to using the direct cable method.
Post relates to: Treo 650 (Verizon)

Similar Messages

Connecting to Remote Desktop Published Apps through RD Web Access not working

Hello,
I have configured an RD Gateway server. My scenario is like I have a windows 2012R2 server with all RD components (Gateway, web access, connection broker, session host) configured, since this is for a poc. Externally I can access rd web access portal (https://<servername.domain.com>/rdweb)
and can connect to the target server using "Connect to a remote pc" tab without any issue.
But I can't connect to any published app from "Remote App and Desktop". The error I recieve is "unable to connect to remote pc. please provide the fully-qualified name......."
At the same time I can see below errors in event logs related to connection broker:
Error 802:
RD Connection Broker failed to process the connection request for user domain\Administrator.
Error: Element not found.
Event 1306:
Remote Desktop Connection Broker Client failed to redirect the user domain\Administrator.
Error: NULL
Error 1296:
Remote Desktop Connection Broker Client failed while getting redirection packet from Connection Broker.
User : domain\Administrator
Error: Element not found.
Googling I could see some posts related to these issues, mentioning about to check the network connectivity between RDCB and the target server. I can defenitely say it is fine and already mentioned I can connect to the same server using "connect to
remote pc" tab.
Just FYI, I have this server as Amazon EC2 instance and the domain is configured as Amazon directory service. Can someone please help me at the earliest.. This is pretty urgent as my tasks are pending due to this issue..
Vysakh

Hi,
I have seen similar issues with Essential role installed, if it’s installed on the terminal server, please remove it.
Please also ensure involved machines are fully patched and keep port 443 of the TS server open.
When external users connect to the Web Access page, are they able to see remote apps? If not, please check whether user assignment setting is configured correctly for remote apps.
Are users able to open remote apps from internal network?
Here are some related links below for you:
RDWeb URL Access Works Successful but cannot open Apps Externally only Internally
https://social.technet.microsoft.com/Forums/en-US/144a0543-7a7c-4899-a674-0fd29dacab7a/rdweb-url-access-works-successful-but-cannot-open-apps-externally-only-internally?forum=winserverTS
RemoteApp Internet
https://social.technet.microsoft.com/Forums/windowsserver/en-US/70a819de-3338-4427-a1c3-e38ef99dd4b3/remoteapp-internet?forum=winserverTS
Configuring RD web access for public/external access
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4396d3e9-2ac5-4d0b-baba-25471498a349/configuring-rd-web-access-for-publicexternal-access?forum=winserverTS
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Multiple monitors macbook pro

2012 mbp
i have one connected to the minidisplay port now.
suggestions ?
thank you

i was able to connect 3 external monitors, but was painful and expensive . any upainful or inexpensive sugestions please

Multiple Instances of Same Application Icons in iTunes App Folder

I recently sync'ed my iPhone to iTunes on my MBP. After doing so I noticed that in the iTunes application folder there was 2 icons for each of my application that I have. Only one icon though on my iPhone. Running a sync a third time I got 3 icons in the applications folder for each application, but again only one instance of the application icon on my iPhone.
I am not sure why this is occuring, but need some help to ensure that iTunes is reflecting the applications correctly.
Why this is importance, is I can now no longer update my paid applications, via the iPhone and the Apps Store shows I need the same update 3 times, but will not download, as it claims the update was already performed.
Something is messed up and need some guidance and help. PLEASE
Thanks

Yes, I migrated my iTunes directory, and after the migration, everything looked fine. Only one set of icons. It was not until I started to sync the itunes on my new MBP that the duplicating of icons started.
I try to delete the duplicate icons, but in doing so it will delete the application on the iPhone.
It there a registry that stores the icon to file associations?
If I look in the music/iTunes/Mobile Applications folder there is only 1 instance of the *.ipa for each application. So why does iTunes have 3 copies of the icons pointing to the one *.ipa file. There must be an internal itunes registry that has made the icon associations. That is what needs cleaning out. I just do not know where that would be, given there is only one *.ipa file under the iTunes file structure.
Can anyone help determine how to clean up the multiple icons?
Thanks

Preventing multiple instances of same application - started with "java app"

I need to ensure that only one instance of an application runs at any given time.
As far as I know launching it twice with "java appName" will run each in its own memory space, so it is not immediately obvious how to achieve it. I considered using a database entry or environment variable, but those would need to be cleared on exit and therefore be at risk of not being cleared if the application crashes or hangs.
Is there a Java API call that would allow me to do a check for other instances of the same application... safely?

Create a ServerSocket on a fixed port number that isn't used by any other application. If you get a BindException, your application is alread running.

Premiere Pro won't span multiple monitors

Premier Pro CS3
I cannot get the PP app to span multiple monitors. Previously I have used Premiere to span two 22" monitors so I can have a very wide timeline. Now that I have installed CS3, it "takes over" my second monitor as a "Program" monitor and I cannot figure out how to shut it off. It also makes this monitor useless for any other applications that I have open while CS3 is open. Help!

Well, now it's working and I have NO CLUE WHY... perhaps opening and closing Premiere 5 times is required before the videocard gets into the act. In any case, it has just started working and I completed an entire editing sequence with no freaky behavior at all.
I love it when a plan comes together - but it's sure nice to know "why" for next time ocasionally... I did use an older saved sequence as a starting point this time, so perhaps something was corrupted in the "new workspace" that I tried to save.
Now, of course, I'm afraid to ever turn this computer off again, or even close Premiere...
Thanks to all for your help - you will all get a free autographed copy of my next book, "Dual Monitors for Dummies"...

Can you have multiple users working off the same Mac pro at the same time with multiple monitors but doing different things?

I'm buying desktops for a start up company and was wondering if I could purchase a single Mac Pro and run multiple monitors to allow multiple users to work on the computer at the same time. These users would be doing different tasks but I would hope to accomplish that on a single desktop. I know that screen sharing is possible but with only one user controlling both of the screens. Thanks in advance, sorry for my apple ignorance!

A lot of companies are buying or leasing laptops to be used at the office by day, and carried home at night.
Some companies are doing "Bring your own device". Bring a device to receive email -- computer/smartphone/tablet you already have, or have an allowance to buy one for your use.
If Capital is short (and when is it not) leasing computers, to be turned in a few years, can be a huge savings because the cost is expensed as incurred. The alternative is laying out cash today, but not being able to expense the cost this year. Instead, the computer expense must be recovered over their useful life (often five years) through depreciation.

Surface Pro 3, Remote Desktop, multiple monitors, Windows 8.1 DPI scaling issues

I have been evaluating Surface Pro 3 and once of the attributes is the display. Here is the description of the environment and the remote desktop display issue.
Surface Pro 3 (Windows 8.1 with latest firmware and Windows updates) has 12 inch built-in screen with native resolution 2160x1440. The Surface is docked and an external monitor (native resolution 1920x1080) is connected to the docking stations. The
display configuration doesn't allow for different scaling for each monitor, single scaling value is used for multiple monitors. This is an issue as the recommended scaling of 150% is optimal for small built-in screen of Surface but it is not optimal for
large screens of external monitors. Also this scaling is "inherited" by a remote desktop session which results in objects being too large on the remote desktop sessions or sometimes even blurry/fuzzy.
Can the blurriness/fuzziness of the remote desktop session be resolved?
Z

Hi Colin,
Thanks for the response. I installed the latest firmware and patches about a week ago and the scaling issue improved. It is not optimal yet as some graphical elements are still out of proportions but I do not want to spent more resources on this subject
anymore.
Best regards,
Zbysek
Z

Macbook Pro and Multiple Monitors

Hi,
I was considering on making the move to apple and getting the macbook pro.I multi-task a lot with my machine and was thinking of buying 2 20" apple cinema display's.Is their a way of connecting my macbook pro to the 2 cinema displays and to a 32" so 4 monitors including the unit itself can be run.It needs to be quiet cheap as well don't really want to spend a lot of money on it.All the screen's have to run different I don't want it to be mirroring on all four.
Thanks
Jonathan

No, not without buying an external video card unit that connects via the MBP's Express34 slot. It's not cheap, but one was featured on gizmodo a while back: http://www.tuaw.com/2008/03/08/vidock-gfx-brings-multiple-external-monitors-to-m acbook-pro/
There is no way to run multiple monitors off the single DVI port in the MBP.

Mac pro - multiple graphics cards - multiple monitors - gaming?

Hi there
Early 2008 I purchased a mac pro, with 2 8800gts and 1 2600xt. Works amazingly well, as it was originally purchased for number crunching (video cards were purchased to take advantage of openCL in snow leopard) and more screen realestate. (3 monitors)
But the thought occurred to me... I am also a bit of a gamer...
Are there any games that take advantage of multiple video cards???
Mac or windows game recommendations are welcomed!
Thanks!

I'm sorry if my question was a little ambiguous, let me try to rephrase.
If anyone is familiar with the Nintendo DS system, you will understand that this handheld device has 2 screens.. one is used primarily as a game screen, the second screen has the game map or console or some kind of readout or whatever. Bottom line is, the game takes advantage of 2 screens.
My question to the masses is:
Are there any games in Mac OS or Windows that take advantage of multiple monitors, and therefore multiple video cards. Not SLI or Crossfire as I understand the Mac Pro hardware does not support it. My question relates to any software titles like Flight Simulators, that can render images on 2 screens connected to 2 separate video cards.
I have a copy of XPlane, and unfortunately, it only supports multiple monitors on a single video card, not multiple monitors on multiple video cards.
So, just rehashing,
Are there any games that are capable of rendering images or gameplay on 2 different video cards at the same time?
If so, what are they?
Cheers and sorry for the confusion.

Connecting Mid-2009 MacBook Pro to multiple monitors?

Hey everyone,
I have a Mid-2009 MBP 5,3-- the type with a Mini Displayport, Firewire 800, 2 USB ports, and an ExpressCard slot. I'm trying to connect multiple monitors to it. The monitors may have different sizes/resolutions, so I'm not looking for a solution like the Matrox DualHead2Go, which apparently stretches out a virtual screen across multiple devices. My MBP should recognize each external monitor as its own device.
In all likelihood I'll be using the Mini Displayport for the first monitor. After doing some research, I can't really figure out the best way to get a second screen attached to the MBP:
People seem to complain about the refresh rate when using USB-to-X adapters for second monitors. Is there a better alternative to USB?I was thinking about ExpressCard-to-X adapters, but not sure this would work for second monitors.
Up to how many monitors could my MBP recognize? Theoretically I could connect 2 through USB + 1 through ExpressCard, but not sure this would work.
Thank you in advance for any tips.

Thank you ogelthorpe for the information. I have found the same cable that you lnked here in Spain/UK but can not find the exact one. The nearest I have found is this one.
http://www.amazon.co.uk/gp/product/B000068O3B/ref=ox_sc_act_title_1?ie=UTF8&psc= 1&smid=A3P5ROKL5A1OLEhttp://
Would that one be suitable. I contacted the manufacturer and asked if it would do the job and they replied
Our CMR-210 is designed to pass analog audio only. Quite often the newer TV's receive only digital information. I would refer to your TV manual or perhaps the TV manufacturer regarding the Audio in jack on your TV to see if it is digital or analog.
Can you please give me any guidance.

Auto-Detect Screen Resolution Does Not Work Across Multiple Monitors With Different Resolutions

Hi,
The Acrobat Pro DC (15.007.20033.2203) auto-detect screen resolution feature does not work with multiple monitors at different resolutions. Acrobat looks fine on my hidpi primary laptop display (Razr 14" 2014) but is completely unusable if I drag or extend the application to a standard HD resolution secondary monitor. Dragging Acrobat from my primary desktop display to the secondary display causes the UI elements to become 2x as large as they should be and makes Acrobat unusable.
Is there a way to make Acrobat auto-detect the display that it is currently on?
Thanks!
-Donald

To prevent it from happing again, you can
1. go to the Mouse preference and turn off the scroll zoom feature.
2. go to the Universal Access preference and disable the zoom features.

VMware Fusion question - Multiple Monitors

I apologize if this is in the wrong area, but I am desperate for some help. I have also posted this same question in the VMware communities but I have not had any luck with anyone responding yet.
It seems that I am having an issue with my virtual machine (windows XP) viewing in full screen or unity across my multiple monitor setup on my Mac Pro. Every time I go to view in full screen or unity I get a VMware popup warning/error that reads:
The virtual machine "Windows XP Professional" is configured for a smaller display size than the one your Mac is currently using. VMware Fusion needs to shut down your virtual machine to enable support for your Mac's display size in Full Screen. Do you want to shut down this virtual machine now?
I have two options, one to shut down, or one to go into full screen. If I go into full screen, full screen works with the correct resolution and everything looks great except its only in the one monitor (not the multiple monitor). If I shut down and restart the virtual machine and try to go to full screen I get the same error.
The VMware tools have been installed and I did go to the view, use all displays in full screen opiton.
My current setup is a mac pro with 3 monitors using 2 NVIDIA GeForce 8800 GT Video Cards.
Any help would be greatly appreciated!
Thanks

I found a link to a VMWare Knowledge Base entry about specifying video ram in Fusion 1. Maybe it is still true.
http://kb.vmware.com/selfservice/search.do?cmd=displayKC&docType=kc&externalId=1 001876&sliceId=1&docTypeID=DTKB_11&dialogID=16580386&stateId=1%200%2016578530

Multiple monitors on laptop: iTunes crashes upon display lock

I have a laptop running XP Pro with an external monitor attached as an extended desktop. When I use iTunes (6.0.5.20) and lock my screen for any reason (close lid, screen saver activates, etc.), iTunes freezes and throws up an "Unsupported Display" window - or at least tries to: it appears in the taskbar but can't be viewed, opened, or closed. Only upon killing it (along with iTunes) can I continue to use my computer.
Anyone have a fix? I'm not the first to run into this; see for example:
http://forums.ilounge.com/showthread.php?postid=743115
Thanks.

I have a desktop with multiple monitors, and I have had the same sorts of problems. For me, iTunes 6 would display a dialog box that says "Unsupported Display" when I unlock the screens, though I was able to see it and dismiss it and life was good. Now, with iTunes 7, I can see that it tried to display an "Unsupported Display" dialog, but it crashed as well...
Here is the stack trace of the crash, in case an Apple Engineer sees this post: (QuickTime.qts 7.1.3.100 and iTunes.exe 7.0.0.70)
Unhandled exception at 0x669185fa in iTunes.exe: 0xC0000005: Access violation reading location 0x0322cc50.
QuickTime.qts!669185fa()
QuickTime.qts!66918cbe()
QuickTime.qts!668cd8c9()
QuickTime.qts!66917f29()
QuickTime.qts!668cd8c9()
iTunes.exe!0045c527()
iTunes.exe!0044a343()
iTunes.exe!0044a4f8()
iTunes.exe!0044a575()
iTunes.exe!006d2749()
iTunes.exe!0076af71()
QuickTime.qts!668cd8d4()
iTunes.exe!0048a6a9()
iTunes.exe!0048a7fb()
iTunes.exe!005a027d()
iTunes.exe!004d1a8d()
iTunes.exe!0048ab3c()
user32.dll!_InternalCallWinProc@20() + 0x28
user32.dll!_UserCallWinProcCheckWow@32() + 0xb7
user32.dll!_DispatchMessageWorker@8() + 0xdc
user32.dll!_DispatchMessageW@4() + 0xf
user32.dll!_DialogBox2@16() + 0x1a6
user32.dll!_InternalDialogBox@24() + 0xb6
user32.dll!_SoftModalMessageBox@4() + 0x677
user32.dll!_MessageBoxWorker@4() + 0x175
user32.dll!_MessageBoxTimeoutW@24() + 0x7a
user32.dll!_MessageBoxTimeoutA@24() + 0x9c
user32.dll!_MessageBoxExA@20() + 0x1b
user32.dll!_MessageBoxA@16() + 0x45
QuickTime.qts!668515ed()
QuickTime.qts!6685f5a5()
QuickTime.qts!6685f739()
QuickTime.qts!6685730e()
Windows XP Pro

High PPI Support Multiple Monitors: How it comes that Remote Desktop implements the hight PPI support very well and win 8.1 doesnt?

http://skovalev.de/wp-content/uploads/2014/05/RemoteDesktop-HighPPI-Perfect.png
Hello all: i am using an High PPI Monitors from Dell XPS15 (3600x1800) and a Normal FullHD above it. The FullHD monitor is an external device and is set up as the primary device. Scaling is set to per Monitor DPI.
Now the Question: how it comes, that my RemoteDesktop on the secondary (internal) screen has almost perfect implementation for this????
BUT i am am talking only about the RemoteDekstopManager, normal one does not works with high ppi in this way... Also ModernUI has no problems with scaling
http://skovalev.de/wp-content/uploads/2014/05/Firfox-and-Resolution-RemoteDesktop.png
NOTE that the resolution on the remote desktop is set to 1600x900 and there are NO scaling problems even on the 3200x1800 monitor!
On both picutures you find the dell monitor on the bottom and the scaled original windows explorer/firefox on the bottom right. See how blurry it is? I really breaks my eyes :(
I hope Microsoft can finally fix the high PPI Monitors issue, since the solutions seems to be already implemented

No, i mean the Scaling Support.
If you use multiple monitor, in windows 8.1 you can scale per monitor. If you use this option with a High PPI monitor, like ultra HD or 4K, the image on the monitors with other PPI than the main monitors appears fuzzy and blury.
But there are also scaling problems even if you use only single monitor. This article blog describes it pretty good:
http://www.hanselman.com/blog/LivingAHighDPIDesktopLifestyleCanBePainful.aspx
By the way there are lot article like this describing the scaling problems, not only by users but also by professinals and IT magazines...
BUT here it comes: watch @ my screenshots. If the remote desktops resolution is 1800x900 and the native resolution is 3600x1800, there are no scaling problems! HOW? So like you can see on my screenshots a native application on my monitor appears fuzzy while
the same application runnin of the remote desktop has clear type!
That means for me, that windows HAS the possibility to scale clearly, but somehow this feature is only supported by RDCM...

Multiple monitors - P6 PRO application is a published app through Citrix.

Similar Messages

Maybe you are looking for