Multiple monitors

what is the best way to connect my 2010 macbook pro to my HDTV? I just don't know whats great

You need a mini-displayport to HDMI cable. I use this one:
http://store.apple.com/uk/product/H7128ZM/A/mini-displayport-to-hdmi-cable-2m?fn ode=MTY1NDA3Ng&s=topSellers
Works great!

Similar Messages

Can you have multiple users working off the same Mac pro at the same time with multiple monitors but doing different things?

I'm buying desktops for a start up company and was wondering if I could purchase a single Mac Pro and run multiple monitors to allow multiple users to work on the computer at the same time. These users would be doing different tasks but I would hope to accomplish that on a single desktop. I know that screen sharing is possible but with only one user controlling both of the screens. Thanks in advance, sorry for my apple ignorance!

A lot of companies are buying or leasing laptops to be used at the office by day, and carried home at night.
Some companies are doing "Bring your own device". Bring a device to receive email -- computer/smartphone/tablet you already have, or have an allowance to buy one for your use.
If Capital is short (and when is it not) leasing computers, to be turned in a few years, can be a huge savings because the cost is expensed as incurred. The alternative is laying out cash today, but not being able to expense the cost this year. Instead, the computer expense must be recovered over their useful life (often five years) through depreciation.

You cannot shadow a session with multiple monitors enabled in Windows Server 2008 R2

Searching through the forums (and according to KB2484290) it appears that there is no solution to this problem. We are rolling out thin clients that are using dual monitors exclusively and we were very surprised to find out that we couldn't shadow
sessions with dual monitors (which to us means that we can't shadow ANY sessions). This now completely changes our approach to managing these devices.
We are running Windows Server 2008 R2 SP1 with Remote Desktop Services installed. The thin clients are running Windows Embedded Standard 7 with the latest updates / RDP client. All steps have been followed to ensure that the apropriate settings and
permissions have been set up to allow access into the session.
We tested by unchecking the RDP setting “use all my monitors for the remote session”, with that setting disabled shadowing worked
Questions:
1. KB2484290 is from Dec 2010 - It's now April 2012, is there a workaround / hotfix for this issue that will allow us to shadow sessions using the native Microsoft tools?
2. Are there any recommended alternatives (software)? Free/Paid - doesn't matter we just need something that will work. I'm sure there are a few options out there but I am looking for suggestions for what people have used in the past that worked
best for them to help us narrow down the choices.

Hi,
In my experience, so far, the workaround is Remote Assistance, Remote Assistance supports multiple monitors, and is the presently recommended solution if you need this functionality. Remote Assistance is a Windows Server Feature that must be explicitly installed
on Windows Server 2008 R2; it is already installed with the client versions of the operating system.
More information:
Remote Assistance Overview
http://technet.microsoft.com/en-us/library/cc753881.aspx
Remote Assistance and Resulting Internet Communication in Windows Server 2008
http://technet.microsoft.com/en-us/library/cc770456(v=ws.10).aspx
As far as I know, there are some third-party tools can be used as the solution, such as Teamviewer, ISL Online, etc.
Please Note: The third-party products discussed here are manufactured by companies that are independent of Microsoft. We make no warranty, implied or otherwise, regarding
these products' performance or reliability.
Regards,
Dollar Wang
Forum Support
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Technology changes life……

How to set up multiple monitors

I got a 27" 3.1 gz Imac for Christmas. I need to run multiple monitors on it.
#1 How many monitors will it support?
#2 How do I hook them up to the Imac?
#3 What hardware do I need in order to do this?
Phillip

This link is talking about using the Imac as a display for another computer. So basically, this article is telling me how I can use my Imac as a display monitor. That is not what I am trying to do.
I want to use multiple monitors on this Imac.
Phillip

Wanting to use multiple monitors on HP hpe210Y w-DVI-I and HDMI. Audio: 5.1 Surround

I have a HP Elite hpe210y with only two outputs of which are: 1) DVI-I and 2) HDMI. My situation is that I have 2 new HP Monitors with VGA Cables. I have an adapter for DVI-I to VGA and also VGA to Dual VGA. I do NOT want the monitors to work as Duplicates however. I want the second monitor to be an extension. I am also interested in getting even 2 more monitors in teh near future for a total of 4.
Is there some way I can get two monitors to work off one DVI-I ?
Will I be able to upgrade to up to 4 monitors?
Is there a part I need?
Wanted to mention that my OS is Win7 Home Premium 64 bit. I use IE9, Chrome and Firefox
I would of never bought this from Best Buy if I had known in advance that there was just the one regular output. I see they have one called a Phoenix which I may look into.
Thank you in advance for your time and consideration.

>Is there some way I can get two monitors to work off one DVI-I ?
I've not yet seen a solution for that.
You can use a hdmi2vga adapter for the second port.
>Will I be able to upgrade to up to 4 monitors?
>Is there a part I need?
you can try one of these:
http://www.evga.com/products/pdf/100-U2-UV19-TR.pdf
http://www.amazon.com/Kensington-Universal-Multi-Display-Adapter-Black/dp/B002F9NSMQ/ref=pd_cp_e_1
http://aluratek.com/usb-2-0-high-resolution-vga-adapter
They will use your current graphics device.
If you are looking for a new solution - I've read about DisplayPort version 1.2 that can do 'daisy-chain connection' with multiple monitors. But this you have to 'google' yourself.
HTH
V.
*** Say 'Thanks' with Kudos ***

Can i have multiple monitor with my mac mini ?

Can i have multiple monitor with my mac mini like i do with my PC ? 2 differents screens.. not mirror.

There's lots of Mac Mini models since 2006 or so. What do you have?
Most support two monitors but how you do it is different depending on model.
Put this phrase into Google
dual monitors, mac mini
and you'll come up with the solution needed based on which MM you have.

VMware Fusion question - Multiple Monitors

I apologize if this is in the wrong area, but I am desperate for some help. I have also posted this same question in the VMware communities but I have not had any luck with anyone responding yet.
It seems that I am having an issue with my virtual machine (windows XP) viewing in full screen or unity across my multiple monitor setup on my Mac Pro. Every time I go to view in full screen or unity I get a VMware popup warning/error that reads:
The virtual machine "Windows XP Professional" is configured for a smaller display size than the one your Mac is currently using. VMware Fusion needs to shut down your virtual machine to enable support for your Mac's display size in Full Screen. Do you want to shut down this virtual machine now?
I have two options, one to shut down, or one to go into full screen. If I go into full screen, full screen works with the correct resolution and everything looks great except its only in the one monitor (not the multiple monitor). If I shut down and restart the virtual machine and try to go to full screen I get the same error.
The VMware tools have been installed and I did go to the view, use all displays in full screen opiton.
My current setup is a mac pro with 3 monitors using 2 NVIDIA GeForce 8800 GT Video Cards.
Any help would be greatly appreciated!
Thanks

I found a link to a VMWare Knowledge Base entry about specifying video ram in Fusion 1. Maybe it is still true.
http://kb.vmware.com/selfservice/search.do?cmd=displayKC&docType=kc&externalId=1 001876&sliceId=1&docTypeID=DTKB_11&dialogID=16580386&stateId=1%200%2016578530

How do I operate multiple monitors on my HP Pavilion Slimline Pavilion s3600t?

Hello HP Forum,
I am looking to operate 2 monitors on my HP Pavilion Slimline Pavilion s3600t that currently has GeForce 7100/NVIDIA nForce 630i. I am not a computer technician and only semi-tech saavy (less than more). I was told I needed a video card; however, I don't know what I need nor how to install it. Can anyone tell me what I type of video card I need to purchase (and why) and then point me to a video or instructions on install?
Further, what would it take for a computer to operate 3 monitors? Would this computer capable of operating 3 monitors? And what would that entail/how does it compare to installing options for 2 monitors?
Thanks for your help guys!
Cheers

Hi JuHo, I see that you would like to know how to connect multiple monitor's to your computer. I do have a document that will assist you with this task. Please click on the link to get to the document. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=bph03739&lc=en&product=3832297&tmp_...
This document is for Windows Vista and XP. If you are using a different operating system, please let me know and I will research the issue more for you.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Multiple monitors on laptop: iTunes crashes upon display lock

I have a laptop running XP Pro with an external monitor attached as an extended desktop. When I use iTunes (6.0.5.20) and lock my screen for any reason (close lid, screen saver activates, etc.), iTunes freezes and throws up an "Unsupported Display" window - or at least tries to: it appears in the taskbar but can't be viewed, opened, or closed. Only upon killing it (along with iTunes) can I continue to use my computer.
Anyone have a fix? I'm not the first to run into this; see for example:
http://forums.ilounge.com/showthread.php?postid=743115
Thanks.

I have a desktop with multiple monitors, and I have had the same sorts of problems. For me, iTunes 6 would display a dialog box that says "Unsupported Display" when I unlock the screens, though I was able to see it and dismiss it and life was good. Now, with iTunes 7, I can see that it tried to display an "Unsupported Display" dialog, but it crashed as well...
Here is the stack trace of the crash, in case an Apple Engineer sees this post: (QuickTime.qts 7.1.3.100 and iTunes.exe 7.0.0.70)
Unhandled exception at 0x669185fa in iTunes.exe: 0xC0000005: Access violation reading location 0x0322cc50.
QuickTime.qts!669185fa()
QuickTime.qts!66918cbe()
QuickTime.qts!668cd8c9()
QuickTime.qts!66917f29()
QuickTime.qts!668cd8c9()
iTunes.exe!0045c527()
iTunes.exe!0044a343()
iTunes.exe!0044a4f8()
iTunes.exe!0044a575()
iTunes.exe!006d2749()
iTunes.exe!0076af71()
QuickTime.qts!668cd8d4()
iTunes.exe!0048a6a9()
iTunes.exe!0048a7fb()
iTunes.exe!005a027d()
iTunes.exe!004d1a8d()
iTunes.exe!0048ab3c()
user32.dll!_InternalCallWinProc@20() + 0x28
user32.dll!_UserCallWinProcCheckWow@32() + 0xb7
user32.dll!_DispatchMessageWorker@8() + 0xdc
user32.dll!_DispatchMessageW@4() + 0xf
user32.dll!_DialogBox2@16() + 0x1a6
user32.dll!_InternalDialogBox@24() + 0xb6
user32.dll!_SoftModalMessageBox@4() + 0x677
user32.dll!_MessageBoxWorker@4() + 0x175
user32.dll!_MessageBoxTimeoutW@24() + 0x7a
user32.dll!_MessageBoxTimeoutA@24() + 0x9c
user32.dll!_MessageBoxExA@20() + 0x1b
user32.dll!_MessageBoxA@16() + 0x45
QuickTime.qts!668515ed()
QuickTime.qts!6685f5a5()
QuickTime.qts!6685f739()
QuickTime.qts!6685730e()
Windows XP Pro

Imac multiple monitors

Hi
I have a weird startup problem on my iMac 27". It boots past the apple logo and blue screen but then I getaway white screen with random grey checkers all over the place!
I had issues with my snow leopard install which we're fixed after a fcsk command.
For some annoying reason I can't boot to a different USB or flash drive as I don't get past the mac logo!
Any help would be appreciated

Sorry nothing to do with multiple monitors!! My 1st post, don't know where that came from!

Feature Request - Better Multiple Monitor Support

Lightroom's support for a second display has definitely helped my workflow. I hope the team will consider adding more flexible multiple monitor support in version 4. Here's why.
I've recently experimented with running one of my three screens in portrait mode. When this screen hosts Lightroom's secondary display window in Loupe view, my verticals finally get equal real estate for editing. While I've not done hard statistics on my library, I know more than 50% of my imagery is in portrait orientation.
I'd like to see LR V4 support three or more screens so I could set up as follow:
Screen 1 - main lightroom interface, would not need to be calibrated, for controls and navigation
Screen 2 - Portrait orientation, loupe view - this would be a calibrated display, all develop changes to verticals would be judged on this screen
Screen 3 - Landscape orientation, loupe view - another calibrated display, all develop changes to horizontals would be judged on this screen
If Adobe could make the app intelligent enough to route the image to the correct screen based on orientation (recognizing and respecting cropping that could change orientation) my edit sessions would certainly speed up and I could maximize the productivity of multiple screens.
I'd be happy with this, but I'm also stymied by the need to switch back to Library mode to tag images when my primary workflow has me in develop. Ultimately everything depends on the quality of the image. Before I invest in image-specific meta data, I have to process or at least "test-process" an image. IMO the Quick Develop panel is useless, once you become accustomed to the granular control of the develop sliders, it just doesn't cut it.
In the three monitor setup I described above I'd love to be able to configure screen 1, with a combination of panels from Library and Develop, so I could stay "develop centric" with immediate access to keywording and meta. The two additional screens would intelligently handle image display.
I think this might speed my workflow by 33% and having just returned from a Tour de France project that generated 23,000 images I need all the productivity help I can get.

VeloDramatic wrote:
Thanks for all those votes Rob. Now we just need to get the other 999,999 on board.
Actually, this topic has come up a lot on this forum. At this point, I think we just need to get Adobe on board.
VeloDramatic wrote:
There may be another thread for this one additional thought. If Adobe does improve multiple monitor support, we should be able to optimize our previews for those screens. Even after prerendering 1:1 previews there are issues with DEVELOP doing its own thing (I believe) each time a new image is loaded. I make extensive use of the PREVIOUS button moving through my shoots and there's always a lag of one or two seconds while the develop preview loads before the button is active. In a desktop environment where multiple screens allow landscape and portrait images to be displayed full screen I'd argue that 100% of the host screen resolution would be the ideal preview. Hope that made sense.
Yes, faster switching would be nice. I'm not sure what that would take. As it stands, there's like "9" previews generated when you do 1:1s - 100% down to tiny thumbnails. Still, one at exact monitor size that does not need to be resized at all does seem like it would be the fastest - I'm a bit on a limb though at this point.
Rob

High PPI Support Multiple Monitors: How it comes that Remote Desktop implements the hight PPI support very well and win 8.1 doesnt?

http://skovalev.de/wp-content/uploads/2014/05/RemoteDesktop-HighPPI-Perfect.png
Hello all: i am using an High PPI Monitors from Dell XPS15 (3600x1800) and a Normal FullHD above it. The FullHD monitor is an external device and is set up as the primary device. Scaling is set to per Monitor DPI.
Now the Question: how it comes, that my RemoteDesktop on the secondary (internal) screen has almost perfect implementation for this????
BUT i am am talking only about the RemoteDekstopManager, normal one does not works with high ppi in this way... Also ModernUI has no problems with scaling
http://skovalev.de/wp-content/uploads/2014/05/Firfox-and-Resolution-RemoteDesktop.png
NOTE that the resolution on the remote desktop is set to 1600x900 and there are NO scaling problems even on the 3200x1800 monitor!
On both picutures you find the dell monitor on the bottom and the scaled original windows explorer/firefox on the bottom right. See how blurry it is? I really breaks my eyes :(
I hope Microsoft can finally fix the high PPI Monitors issue, since the solutions seems to be already implemented

No, i mean the Scaling Support.
If you use multiple monitor, in windows 8.1 you can scale per monitor. If you use this option with a High PPI monitor, like ultra HD or 4K, the image on the monitors with other PPI than the main monitors appears fuzzy and blury.
But there are also scaling problems even if you use only single monitor. This article blog describes it pretty good:
http://www.hanselman.com/blog/LivingAHighDPIDesktopLifestyleCanBePainful.aspx
By the way there are lot article like this describing the scaling problems, not only by users but also by professinals and IT magazines...
BUT here it comes: watch @ my screenshots. If the remote desktops resolution is 1800x900 and the native resolution is 3600x1800, there are no scaling problems! HOW? So like you can see on my screenshots a native application on my monitor appears fuzzy while
the same application runnin of the remote desktop has clear type!
That means for me, that windows HAS the possibility to scale clearly, but somehow this feature is only supported by RDCM...

Let's Be Honest / Save Time: Lenovo T430s (NVIDIA) DOES NOT Support Multiple Monitors

There have been a few comments / complaints / articles around the web regarding the T430s and difficulties using multiple monitors.
But since this capabilitiy is clearly documented in all of Lenovo's specifications and marketing literature, I went ahead and bought an i7, NVIDIA, SSD, T430s with the docking station and all the bells and whistles to facilitate 3 or even 4 monitors.
Well please listen and let's be clear: IT DOES NOT WORK. Therefore, to be clear:
DO NOT BUY THIS MACHINE AND DOCK IF YOU WANT IT TO LIVE UP TO ITS MULTI MONITOR PROMISE.
In the two weeks since FedEx arrived, here is the deal:
1) I fussed around with the dock and monitors at home and the office to no avail, for most of TWO weekends. (I am not a beginner).
2) Then, I spoke to Lenovo in Atlanta's tech support for THREE HOURS. No results
3) I spoke to Lenovo's "premium support" (paid) for FOUR HOURS. No results.
4) I consulted with a 3rd party expert on mulitple monitors who was kind enough to remote into my machine for another HOUR. No results.
5) Muliple parties have confirmed that yes, all hardware is working and yes, everything can be seen in device manager, and yes, the NVIDA card is properly switched on in the BIOS, yes I bought the i7 version etc.
6) And just in case, yes, we wiped the drive clean for a factory reset, yes we unistalled and reinstalled all the drivers and yes, we even deleted the Lenovo driver just in case the NVIDIA driver was newer or better and yes, we double checked the settings in the BIOS again.
7) Yes, we tried every connector in the dock AND the laptop: VGA, DVI, DP and mini DP - in EVERY possible combination.
And NO, IT STILL DOESN'T WORK. AT ALL. Two screens, take your pick, but THAT'S IT.
Finally, not one but TWO technicians asked me to not quote them (so I wont mention any names) but that in their opinion IT JUST DOESNT WORK AT ALL, EVER, despite Lenovo's claims / insistance that it is configured for 3 and even 4 monitors.
So the final conclusion was only that Lenovo must have rushed this T430 spec / configuration / capability to market (including the glossy brochures!) before figuring out that something is missing in the handshake between the mother board and the NVIDIA card?
Or in the firmware re swithing between the Intel (internal) and NVIDA card?
Or something else which prevents the NVIDIA card from seeing the ports on the laptop or the dock?
In summary 1) you get NOTHING from the NVIDIA upgrade and with respect to more than 2 monitors, IT JUST DOES NOT WORK, AT ALL, EVER, PERIOD and END OF STORY.
I too am a die hard old school Thinkpad enthusiast and with the company's service could match their classic products.
I have an X201 that I generall love, but would appreciate more speed, an SSD and I have to drive at least 3 external monitors, using at least 1920 x 1080 resolution.
Perhaps a W series Thinkpad would work, but I also travel so going up to the T430s was already a sacrifice vs the small size of the X201.
There are some 3rd party solutions but they are expensive and not so sure how plug and play they are with 3 or more monitors - what the T430s and Mini Dock 3.0 are SUPPOSED TO DO. But they dont.
Not giving up yet, but this has been a real bummer.
PS
Lenovo was very focused, efficient, and uncompromising when charging my CC for "premium" support.
Solved!
Go to Solution.

Thors,
Thank you and happy to report, albeit after all the hours and now weekend number 3:
1) For the moment, I am able to repeat the 3 screen performance using mini DP from the Thinkpad and 2 DPs from the dock to the external monitors
AND
2) For the first time ever, I am just now for the first time running the 3rd external monitor from the VGA port on the dock.
That is what I meant by using the various ports on the dock, so that the Thinkpad can simply be docked and undocked without connecting the mini DP - the purpose of a dock obviously. As stated in other threads and articles, various configurations of the dock ports supposedly work to achieve 3 external screens, but until today was not able to do this.
That is the good news and thank you for all help.
The bad news is I stil have no clear idea why this has been so difficult, or where the problem lives that consumed so many hours of my own time and many hours with Lenovo tech support as stated above.
Some success seems to have happened only after more than one set of LONG updates to Windows 7 (?)
If I can replicate this set up the office (where I have 3 of the same monitors) I will be almost there.
Thank you again to all for help and support.

Windows 7 and Multiple Monitor Issues

Alright, I have spent the past 3 days searching these forums as well as on Microsoft's support pages and all of Google to find the answer to my issue and it seems as though I'm the only one who is running into this problem.
I have a 15 inch Macbook Pro with the GeForce 9600M GT Nvidia Graphics card with the latest version of Mac OSX and Bootcamp installed on it. I have Windows 7 installed in bootcamp. I just purchased a Mini DisplayPort to VGA cord with a VGA cord so as to connect my computer to my Sony Bravia HDTV to use as a second monitor. I plug in the cords, plug them into my TV, and put it into the proper input and it works like a charm. Then I go and boot up in bootcamp under Windows 7, plug in the cord, and my screen gets to the "starting windows" logo and then it goes black. I push ever button, I try control alt delete, nothing. I have to hold down the power button to turn off the computer and then turn it back on.
I turn it on, boot up into Windows 7, let it load, then plug in the cord, and the computer display instantly goes black, again, and yet nothing displays on the TV. Again, I try everything to no avail, so I power it off and back on. I go through this at least 10 times to no avail. I finally give up and try again the next day.
Next day, I plug it in, and the monitor stays up, but yet nothing is displayed on the TV. I go to my resolution settings in Windows, and go to the multiple monitors tab, and select every possible option (extend, duplicate, etc) and nothing will display on my TV. I try to change the settings to which it responds with "unable to save display settings" and nothing changes. I attempt to enter the nvidia program and make changes that way. The TV is detected, but when I select it and attempt to apply anything, no changes take effect and I am left with only the laptop display. Keep in mind I uninstalled and reinstalled all of the video drivers and such.
Finally I get fed up so I purchase a Mini DisplayPort to DVI adapted and a DVI to HDMI adapter. I try again. Again in OSX it launches immediately, no problems. I go back into Windows, and immediately I'm dealing with the instant black screen.
I'm going crazy over here trying to figure this out. I know it's possible to do this because I've seen people on youtube doing this and again it works on OSX so why the heck won't it work? If anyone has any idea what's going on here please help me out. Thanks.

JonMarx... I'm having the exact same problem. I'm in the exact same situation as you are. I'm going mad, and it's only by divine providence that I've finally located the only other person who knows what I've been going through. I've spent at least 20 hours trying to get this started back up, to no avail.
I had the secondary display working peachy for a while, long enough to configure everything to be exactly how I wanted it. I unplugged the monitor from the computer just to see what would happen, and that's when the problems started. I managed to get it to work one last time for a brief period a few hours later, but the way it just clicked on made it feel too good to be true.
I've had a wierd problem with a phantom display as well. The display will frequently show up as being available in both the nVIDIA panel and the windows settings, but if I apply the settings, they won't go through. I got a few screenshots of it the last time it happened.
I was just about to reinstall windows completely, but it seems that I'll just run into the same problem again if I do... Here's to hoping a solution is found.

Windows 8.1. Update 1 DPI Settings Multiple Monitors

Hi - I am about to post the same on the windows forums but thought it a good idea to start here.
I put the Windows 8.1 Update 1 on a couple of weeks ago - I spend 1/2 my time with the Yoga 2 in desktop mode with multiple monitors so wanted the enhancements.
Since doing so I can't get the font scalling for different monitors working. I've unchecked the "Let me choose one scalling level for all my displays" but whatever i do seems to affect all monitors. On the whole it is fine, but the taskbar on the QHD Yoga is tiny as are all the contect menus. Whatever I do seems to affect all monitors, has anyone else installed the update and see the same/have a solution. It used to work fine.

Sometimes Windows updates will break your graphics driver. That is because Intel and NVidia do not update their graphics drivers on the same schedule that Microsoft
updates Windows, and sometimes the updates are incompatible and cause the graphics driver to do wonky things. In my case that came in the form of lost brightness settings.
I searched these forums for a fix and I could not find one, so now that I know the answer, I am sharing it here.
How do you fix it? You have to reinstall the graphics driver. This is how I did it.
I found the graphics driver install file that was already on my computer and I ran it. It reinstalled the driver in about 5 seconds and my screen brightness functionality was restored.
Where is my graphics driver install file? On my computer it is here:
D:driversVGAIntelx649.17.10.2932\Setup.exe
Yours is probably in a different but similar location depending on how it was installed and what brand it is, etc. I have a Lenovo
P400 touchscreen laptop with an Intel HD 4000 Graphics.

Surface Pro 3, Remote Desktop, multiple monitors, Windows 8.1 DPI scaling issues

I have been evaluating Surface Pro 3 and once of the attributes is the display. Here is the description of the environment and the remote desktop display issue.
Surface Pro 3 (Windows 8.1 with latest firmware and Windows updates) has 12 inch built-in screen with native resolution 2160x1440. The Surface is docked and an external monitor (native resolution 1920x1080) is connected to the docking stations. The
display configuration doesn't allow for different scaling for each monitor, single scaling value is used for multiple monitors. This is an issue as the recommended scaling of 150% is optimal for small built-in screen of Surface but it is not optimal for
large screens of external monitors. Also this scaling is "inherited" by a remote desktop session which results in objects being too large on the remote desktop sessions or sometimes even blurry/fuzzy.
Can the blurriness/fuzziness of the remote desktop session be resolved?
Z

Hi Colin,
Thanks for the response. I installed the latest firmware and patches about a week ago and the scaling issue improved. It is not optimal yet as some graphical elements are still out of proportions but I do not want to spent more resources on this subject
anymore.
Best regards,
Zbysek
Z

Multiple monitors

Similar Messages

Maybe you are looking for