Multiple motion tweens

Hi!
I have a problem, which I couldn't solve. I made three motion tweens. One is the background, which slides in from left. Another one, is a car, which goes in the scene from right. The two visible wheels of this car are spinning too using a motion tween. The problem is that all these motion tweens keep looping. I would like to let the background and the wheels of the car loop forever, but I want the car to come in from right and stop on the left. When I tried to stop it, it stopped the car, but unfotunately it stopped the background too. How could I manage to let the background and the wheels of the car loop, but stop the car in a position?
I hope I was clear enough. Here is the .fla file in case you didnt understand it :
http://www.megaupload.com/?d=9FRPFVHT

The car and the background are in seperate tweens. How can I stop only one of them?
I used stop(); for the car, but it stops the background too.
PS: I forgot to tell you that I'm a beginner in flash

Similar Messages

CS6: Do Eases have to be re-added for each Motion Tween? Project-wide not possible?

Hi All
Unless I'm missing something, this is a very odd feature.
I created a custom ease to use on multiple motion tweened objects, but when selecting the second motion tween, the custom ease I created for the first was nowhere to be seen. Do I really have to recreate Custom eases, or re-add preset ones for every single motion tween? If so, this is going to get both very tedious and also error-prone as the number of objects increases.
Any help appreciated!
Thanks
Richard

you should create a custom preset (window>motion preset). that custom preset can then be applied to multiple objects multiple times with minimal effort.

Moving multiple symbols "breaks" motion tweens

I'm working on a character rotation in Flash CS 5.5 that leads into a basic walk cycle using all motion tweens. The tutorial I'm following (which only uses classic tweens) says to grab all the upper body symbols with free transform and rotate them forward a little. This works fine with classic tweens, but with motion tweens, the parts pop strangely out of place and the more frames I try to move the upper body symbols on, the worse the symbols start randomly sliding around. You can see a simple before/after example posted below. Moving the profile view upper body symbols displaces the arms on the first frame.
Is there any way to move multiple symbols without ruining them? Someone else described at length a problem like this on an old thread, but no one answered: http://forums.adobe.com/thread/1084800
I've tried taking all the upper body layers and sticking them in a symbol, but that won't work because the left hand will pass over the left leg instead of under due to layering.
EDIT - Whatever change is made to the arms during the walk changes the key frames at the beginning, but only if selected with other symbols. If I move the upper body parts down instead of rotating them, the first frame arms will be retroactively be moved down.
Message was edited by: LastNameLeft3000

If you are interested in getting decent results at some point youwill have to looke into the Bone-Tool or use a extension like DragonBones
The reason why you are having "Displacement"-problems lies in the "Math" behind how AnimatorFactory (the system behind Motion Tweens) handles transformations different from Tweens (Its outright misleading to call them Tweens, and Adobe did a poor naming job).
Right click one of the Motion tweens and chosy "copy as Actionscript 3.0" from the context menu then paste the code in any available textEditor and you will see sth like:
import fl.motion.AnimatorFactory;
import fl.motion.MotionBase;
import fl.motion.Motion;
import flash.filters.*;
import flash.geom.Point;
var __motion_Symbol1_9:MotionBase;
if(__motion_Symbol1_9 == null) {
    __motion_Symbol1_9 = new Motion();
    __motion_Symbol1_9.duration = 24;
    // Call overrideTargetTransform to prevent the scale, skew,
    // or rotation values from being made relative to the target
    // object's original transform.
    // __motion_Symbol1_9.overrideTargetTransform();
    // The following calls to addPropertyArray assign data values
    // for each tweened property. There is one value in the Array
    // for every frame in the tween, or fewer if the last value
    // remains the same for the rest of the frames.
    __motion_Symbol1_9.addPropertyArray("x", [0]);
    __motion_Symbol1_9.addPropertyArray("y", [0]);
    __motion_Symbol1_9.addPropertyArray("scaleX", [1.000000]);
    __motion_Symbol1_9.addPropertyArray("scaleY", [1.000000]);
    __motion_Symbol1_9.addPropertyArray("skewX", [0]);
    __motion_Symbol1_9.addPropertyArray("skewY", [0]);
    __motion_Symbol1_9.addPropertyArray("rotationConcat", [0,3.91304,7.82609,11.7391,15.6522,19.5652,23.4783,27.3913,31.3043,35.2174,39.1304,43.043 5,46.9565,50.8696,54.7826,58.6957,62.6087,66.5217,70.4348,74.3478,78.2609,82.1739,86.087,9 0]);
    __motion_Symbol1_9.addPropertyArray("blendMode", ["normal"]);
    __motion_Symbol1_9.addPropertyArray("cacheAsBitmap", [false]);
    __motion_Symbol1_9.addPropertyArray("opaqueBackground", [null]);
    __motion_Symbol1_9.addPropertyArray("visible", [true]);
    // Create an AnimatorFactory instance, which will manage
    // targets for its corresponding Motion.
    var __animFactory_Symbol1_9:AnimatorFactory = new AnimatorFactory(__motion_Symbol1_9);
    __animFactory_Symbol1_9.transformationPoint = new Point(0.499943, 0.500000);
    // Call the addTarget function on the AnimatorFactory
    // instance to target a DisplayObject with this Motion.
    // The second parameter is the number of times the animation
    // will play - the default value of 0 means it will loop.
    // __animFactory_Symbol1_9.addTarget(<instance name goes here>, 0);
    // Call the addTarget function on the AnimatorFactory
    // instance to target a DisplayObject with this Motion.
    // The second parameter is the number of times the animation
    // will play - the default value of 0 means it will loop.
    // __animFactory_Symbol1_9.addTarget(<instance name goes here>, 0);
This is only the code for simply rotating a rectangle over the duration of 24 frames.
You notice 2 two problems right away: while having the registration point in the center, Flash distorts the values:
    __animFactory_Symbol1_9.transformationPoint = new Point(0.499943, 0.500000); //should be (0.5, 0.5)
you can imagine that this "error" gets worse when inherited from nested symbol to nested symbol, it "exponentially" grows with each nesting, and it will soon reach a point were it gets visible.

Combine multiple animations/moving a motion tween path location

I have three similar animations that are stalling on preload as it's referencing the data from dropbox. We thought that it might be faster if it loaded only once, so I am now trying to combine the animations into a single scene. I'm having trouble copying and pasting the animation. I'm not quite sure where the problem originates from. I did, originally, successfully reproduce the animation and apply it to the separate elements when making them on separate stages, but now I see one of the elements (I'll call it GREEN) has a motion tween, and I'm not sure why the others (ORANGE and BLUE) are set to X, Y motion. I specifically recall having created them via motion tween, but at least they are still moving the way I created them to.
When I copy and paste > All, GREEN (with its motion tween) is placed on the stage at X=45 coordinate, and i need the whole path to be moved over to X=643. When I drag, it only affects the current location, plus there are a couple of "points" on the line that don't have keyframes associated with them, so it has been nerving to try and set them this way. Is there a way to do this?
Thanks

No problem!
So do you notice how your blueballoonCopy has those chevron marks on the timeline? That's an indication of duration in a container such as a symbol or audio element. In your case, it's a total 30 sec. of transitions, and it's a symbol. When you want to loop things differently, they should be in their own timelines, i.e. in their own symbols.
You should do two things to get this set up:
Convert blueballoonCopy and GREEN_KIDS_BALLOONCopy3 into a single symbol, since they will both loop endlessly from the loopGrn label to the end. Put the playhead over the loopGrn label, then select it and the trigger at the end and cut them (Edit > Cut), and then double-click on the symbol on Stage to edit it and with the playhead at the same place, paste the label and trigger. You should now have the label at 26 sec., and the trigger at the end of the timeline. Navigate back to the Stage timeline, and these two elements will now loop endlessly in the brower.
Now convert your orange_balloon element into a symbol - that will put all of its animation inside the symbol. If you want the entire animation loop twice, add a single play action to the end of the chevron (duration indicator). If you want only a part of it to loop, use a single play from action instead, and enter the timecode or label to which you want to loop back.
And now you'll have those two elements looping continuously, and the orange_balloon symbol looping just once.
hth,
Joe

How do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that,

how do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that, then it needs to "fly-out-bottom" again, I can do that, but not on the same line of text...any ideas...

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

CS5 - problem with motion tween..HELP!!

Experts out there, please help.
I have migrated from Flash CS3 to Flash CS5. Unlike in CS3, in CS5 when i use motion tween i am unable to use multiple 'ease in' and 'ease outs' in a single tween span. The tween span has to be divided by the 'split motion' command at 'properties keyframes' into smaller tween spans to further apply ease in/out to each one of them. This is not the case with CS3, you just select one keyframe after another and apply the ease in/out command, no divisions required.
Lets say i want control the accelaration and deccelaration of a bouncing ball without breaking the tween span. How do I do it in CS5 without wasting all the sweat?
Please guys i really need this
I'll be greatful
Thanks

The classic tween is the same as the old Motion tween was in CS3 and earlier. You can grab a keyframe and drag it along he timeline to extend or reduce the tween.
The "new" Motion tween was invented to allow for 3D tweening and to allow you to save the tween action exclusive of the elements that were being tweened, so that you can easily replicate a tween on the timeline.

Motion tweens from keyframe vs properties panel

When motion tweening a grouped object in either Flash 8 or
Flash CS3, I get different results depending on whether I use the
keyframe or the properties panel to set the tween.
If I right-click the first keyframe and select "Create Motion
Tween," I get two graphic symbols named Tween 1 and Tween 2 in the
library .
If I select Motion from the Tween drop-down list in the
Properties panel, I do not get those two graphic symbols in the
library.
Question #1: Which is the better way to create motion tweens
-- using the keyframe or using the properties panel?
Question #2: What other differences are there between
creating a motion tween (or shape tween in CS3) between using the
keyframe or using the properties panel?
Ken Elder
Oklahoma City

1) either is fine, however you should not try to tween
multiple object at the same time, put them in a moveclip and tween
the clip, or on separate layer and tween them individually. This is
why the symbol shows up in the Library, because it's not quite the
right way to do it, and Flash needs to make some things to try a
keep it straight. The best way to tween is to use the Tween class
and script the tween.
2) no difference, they both fire the same method. Like using
key shortcuts vs. the menu.

Motion Tween without losing animation

I have made a character following a tutorial and I made a walk cycle out if it. The next step was to motion tween it but it told me "multiple objects are selected, you must convert to a symbol in order to tween them. Do you wan to convert and tween them? I click ok and although I was able to motion tween him, i lost my animation. So my question is how do I not lose the animation and keep the motion tween so I can animate him moving forward?
Flash 5of6 - YouTube

Here I have found a solution to the problem.
https://discussions.apple.com/message/9955608#9955608

How do you make a motion tween, mask effect and shape tween, with a flash website?

More of less, I will have three seperate pages for the motion tween, mask effect and shape tween... would you make the seperately, in a different scene, as a symbol or on the same scene with the website.

It's not clear what you are after since you start talking about separate pages for the three things, and then ask about how best to put them together. If they are going to be separate they can't be together.
If your intention is to have these three things in one Flash file, ut as separate parts of it, then I would have each within a symbol and have each symbol within the same scene (I don't use multiple scenes).

Free Transform breaks Motion Tweens

Sigh! Normally I try to solve problems myself... but Google isn't giving me anything about this so maybe I'm the only one in the world experiencing this particular issue.
I've used Flash for making games for years now, and I got used to using the old motion tweens for making looping animations for characters. I made the leap from AS2 to AS3 a while ago, and felt like I should try to use these new motion tweens as well since I got CS5...
I've found them completely unusable, however, due to a bizarre problem that happens when moving around objects using the Free Transform tool.
For a single character, I'll have a MovieClip with several layers, each with a 'body part' MovieClip on it, then I add the new blue-type motion tweens to all of those layers. At the end of those tweens, I use F6 to (hopefully) duplicate the starting pose; it is meant to loop, after all. Then I'll go about half way between these two keyframes and move bits around to create the A->B->A sort of 'idle' or 'breathing' animation.
The Free Transform seems dodgy though. If I select all the 'limbs' of a character at once and try to rotate them as a group, it works, but they each end up displaced a bit when I release the mouse; they get offset slightly or rotate a bit in seemingly random directions.
For example, compare these two images (it's easiest if they're opened in separate tabs, I suppose): http://scraps.fighunter.com/sparkpupagh1.png and http://scraps.fighunter.com/sparkpupagh2.png
The first one is after rotating it but before I released the mouse button, the second is what the pieces ended up like after I released the button. Most of the pieces ended up where they should be, but the head was offset slightly. This is a mild case; it's usually worse and affects all the pieces, and the slight offsets and rotations build up, too.
This in itself wouldn't be too bad - though it's frustratingly inaccurate - but it gets much, much worse the more I work on a single animation.
(Note: These strange changes don't happen if I rotate all the parts as a group if they're not also contained within new motion tweens...)
Here's a screenshot showing a frame mid-way through an animation, with one of the parts selected: http://scraps.fighunter.com/meepagh1.png
The Motion Editor is shown, though I don't use that directly.
With that feather bit selected, I then rotated it a tiny, tiny amount, but didn't *move* it at all. When I released the mouse, it ended up snapping suddenly to here: http://scraps.fighunter.com/meepagh2.png
That'd be frustrating in itself, but as you can see from the Motion Editor, it's also messed up most of the other frames in the animation, somehow. This becomes unbearable, as you can likely imagine!
If I edit the graph in the Motion Editor directly to alter the Z value and cause a rotation, it works, without problems... but this is horribly inefficient and unintuitive and not a solution. I can't animate by tweaking numbers. It's like trying to draw a portrait using an Etch-A-Sketch!
It seems to only be the Free Transform tool that creates this bizarre problem.
This has been happening since I got CS5 maybe a year or two ago, though I haven't actually had to use the animation tools much until a few days ago so that's why I'm bringing it up now. I've restarted Flash, my computer, etc, etc, many times; I also got the trial version of CS6 today to see if THAT would fix it, but the exact same thing happens in that version too.
I'm wondering whether it's my computer's fault in some way... I don't know enough about hardware and 'specs' and that sort of stuff to describe anything about it, but I'm using Windows Vista and the computer is fairly old and not exactly what I'd call reliable. I'm planning to get a new one soon, so it'd be nice if that fixed this problem... but frustrating if it doesn't.
I'll link to the CS6-flavoured .fla that those screenshots are from: http://scraps.fighunter.com/Meep.fla
I'd very much appreciate it if someone could test this to see if it's happening to only me! If I go to frame 146 (to choose one at random), and try to rotate the foot, slightly, using the Free Transform tool, it breaks in the way that I've described. (Oddly, the head feather rotates without issues on that frame...) If you were to try to do this same thing and it *doesn't* break, it might be a good sign that it's my computer's fault!
If it *does* break though... then I'd very much appreciate any help I can get from someone who understands the new motion tweens better than I do!
It'd be a shame to have to go back to Classic Tweens because of this...

Sigh! Normally I try to solve problems myself... but Google isn't giving me anything about this so maybe I'm the only one in the world experiencing this particular issue.
I've used Flash for making games for years now, and I got used to using the old motion tweens for making looping animations for characters. I made the leap from AS2 to AS3 a while ago, and felt like I should try to use these new motion tweens as well since I got CS5...
I've found them completely unusable, however, due to a bizarre problem that happens when moving around objects using the Free Transform tool.
For a single character, I'll have a MovieClip with several layers, each with a 'body part' MovieClip on it, then I add the new blue-type motion tweens to all of those layers. At the end of those tweens, I use F6 to (hopefully) duplicate the starting pose; it is meant to loop, after all. Then I'll go about half way between these two keyframes and move bits around to create the A->B->A sort of 'idle' or 'breathing' animation.
The Free Transform seems dodgy though. If I select all the 'limbs' of a character at once and try to rotate them as a group, it works, but they each end up displaced a bit when I release the mouse; they get offset slightly or rotate a bit in seemingly random directions.
For example, compare these two images (it's easiest if they're opened in separate tabs, I suppose): http://scraps.fighunter.com/sparkpupagh1.png and http://scraps.fighunter.com/sparkpupagh2.png
The first one is after rotating it but before I released the mouse button, the second is what the pieces ended up like after I released the button. Most of the pieces ended up where they should be, but the head was offset slightly. This is a mild case; it's usually worse and affects all the pieces, and the slight offsets and rotations build up, too.
This in itself wouldn't be too bad - though it's frustratingly inaccurate - but it gets much, much worse the more I work on a single animation.
(Note: These strange changes don't happen if I rotate all the parts as a group if they're not also contained within new motion tweens...)
Here's a screenshot showing a frame mid-way through an animation, with one of the parts selected: http://scraps.fighunter.com/meepagh1.png
The Motion Editor is shown, though I don't use that directly.
With that feather bit selected, I then rotated it a tiny, tiny amount, but didn't *move* it at all. When I released the mouse, it ended up snapping suddenly to here: http://scraps.fighunter.com/meepagh2.png
That'd be frustrating in itself, but as you can see from the Motion Editor, it's also messed up most of the other frames in the animation, somehow. This becomes unbearable, as you can likely imagine!
If I edit the graph in the Motion Editor directly to alter the Z value and cause a rotation, it works, without problems... but this is horribly inefficient and unintuitive and not a solution. I can't animate by tweaking numbers. It's like trying to draw a portrait using an Etch-A-Sketch!
It seems to only be the Free Transform tool that creates this bizarre problem.
This has been happening since I got CS5 maybe a year or two ago, though I haven't actually had to use the animation tools much until a few days ago so that's why I'm bringing it up now. I've restarted Flash, my computer, etc, etc, many times; I also got the trial version of CS6 today to see if THAT would fix it, but the exact same thing happens in that version too.
I'm wondering whether it's my computer's fault in some way... I don't know enough about hardware and 'specs' and that sort of stuff to describe anything about it, but I'm using Windows Vista and the computer is fairly old and not exactly what I'd call reliable. I'm planning to get a new one soon, so it'd be nice if that fixed this problem... but frustrating if it doesn't.
I'll link to the CS6-flavoured .fla that those screenshots are from: http://scraps.fighunter.com/Meep.fla
I'd very much appreciate it if someone could test this to see if it's happening to only me! If I go to frame 146 (to choose one at random), and try to rotate the foot, slightly, using the Free Transform tool, it breaks in the way that I've described. (Oddly, the head feather rotates without issues on that frame...) If you were to try to do this same thing and it *doesn't* break, it might be a good sign that it's my computer's fault!
If it *does* break though... then I'd very much appreciate any help I can get from someone who understands the new motion tweens better than I do!
It'd be a shame to have to go back to Classic Tweens because of this...

How many motions tweens can you have on a timeline?

I'm a college student in Seattle. We just had our mid-terms in Flash CS5. One of the really simple questions was "How many motion tweens can you have on a timeline." Yup. The answer is one...... or is it? I had a long discussion with my tutor (who is the greatest tutor in the world) and he wanted to think about it. I said to him that I thought that one motion tween was wrong because you can click on an object in the timeline, make it a motion tween, and double click it and make several motion tweens. So, essentially, you can have more than one motion tween on a timeline. Is anyone able to advise me because this is all about grades!

You can have quite a few motion tweens on a timeline. You can even have them happening simultaneously (I don't know of a specific limit), as long as they are all on their own layers. Though the more you add simultaneously the more they can weigh down the speed of things running.
If you need to prove this to someone, the easiest way is to create it and demonstrate it. But you may want to check the exact wording of the question... it would not be beyond an examiner to throw a trick question in.

Poor quality motion tween with png image, tried "Trace Bitmap", but then it looks like a newspaper

Greetings all,
I've been a software developer for many years, but am not very savy in the design elements. So, much of what I'm going to say will probably sound "newbie", so please forgive me in advance.
So, I'm trying to get a transparent image to fly in from the side. So, I *thought* I was doing the correct thing by moving the "symbol" off of the visible portion of the stage, and creating a motion tween to move it onto the stage. The motion works, but the quality of the image in general (and the text in specific) looks pixelated.
Thus, I did a little bit of snooping, and everyone said that you should start with a bitmap. So I saved the image from Photoshop into .bmp format, and was able to set the properties to "allow smoothing" and with lossless compression. So far, so good. Now, as I expected, the transparency is no longer there...
So here's the question: how can I make this image retain its quality, still have transparency, and a motion tween?
It seems like this is some set of characteristics that don't play well together, even though I see this type of thing online ALL the time.
I tried "Trace Bitmap" to convert to a raster image, and tried to follow some suggestions online, but when I do "Trace Bitmap", it ends up looking like it has a bunch of grayish dots on the image... definitely NOT what I was expecting.
Thanks for your help!
JPB

Go back to using the png, and set the smoothing allowance. That should take care of the quality. In Flash, a "bitmap" will often refer to any type of image element... .bmp's are probably dinosaurs (as in extinct) where Flash usage is concerned.

How do i start a motion tween by clicking a button and stop it at the end of the tween.

Hi guys,
I am creating a website for a project and i am trying to activate a box bropping down from another box when i click on the enter here button i have created. I have set the motion tween and its working when i preview i just unsure of the correct actionscript to start this tween when i have clicked the entere here button or how to stop it at the end of the tween.
I am scared i may have made the layers in the wrong place, they are all currently in scene 1. does my second box that is dropping down need to be set inside the layers of the first box?
Bit of a newbie at this.
Thanks in advance!

Create the dropping box movieclip as an animation by itself with a stop() coomand in the first frame and a stop() command in the last frame. The click of the button should tell the movieclip to play(); at which point the animation should play and stop at the end.
Another option would be to use an actionscript Tween to make the box drop. Going that route the animation is what you code it to be and there is no need to have to stop it as it will end where you tell the Tween to end at.

3d motion tween load problem

Hey all,
I'm having a problem which has made me struggling for two days. I hope i can get some new ideas for my problem here.
I created a fla which includes several 3d motion tween in CS5.5, when it's compiled it works perfect. But when i try to load this swf into my main project, images get blurry and distorted. Below is the screenshot of the situation. The first one is the correct one, and second one is loaded into main project. I read that scaling 3d tweens might cause such problems and tried to fix it by two solutions. As first, i tried to retransform the tween by: myContainer.transform.matrix = new Matrix(); but didn't work out. As second, i tried to rescale the stage which mentioned as a solution is some blogs.
And i don't know if it is some kind of bug as mentioned here: http://forums.adobe.com/message/2258767
I'd really be glad if i can get some ideas, thanks all.

anyone?

Motion Tween w/ Rotation Dropping on the Y Axis

Is there a way to prevent a motion tween w/ rotation from dropping on the Y axis? Basically I used Free Transform to change the angle of a line, but it always lowers itself on the Y axis when I insert a motion tween in it.

Hey there,
The properties shouldn't be changing when you insert a motion tween. Could you either attach a file with the object *before* you create the tween, or let me know all the properties of the object before you insert the tween so I can try and reproduce internaly? (X, Y, rotation, scale X/Y, skew X/Y).
Thanks!
Jen.

Multiple motion tweens

Similar Messages

Maybe you are looking for