Multiple network adapters and metric settings

I can't seem to get Windows to use the preferred wired adapter over the wireless. I have set a manual metric value to each adapter and it shows correctly in the route table but that doesn't seem to matter. Its still always defaulting to using
the wireless adapter. I changed the order in the advanced settings on Manage network connections as well but nether seem to work.
===========================================================================
Interface List
13... ......Bluetooth Device (Personal Area Network)
11... ......Dell Wireless 1504 802.11b/g/n (2.4GHz)
10... ......Intel(R) 82579LM Gigabit Network Connection
1...........................Software Loopback Interface 1
===========================================================================
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.75.1 192.168.75.117 4
0.0.0.0 0.0.0.0 192.168.254.1 192.168.254.120 1011
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.75.0 255.255.255.0 On-link 192.168.75.117 258
192.168.75.117 255.255.255.255 On-link 192.168.75.117 258
192.168.75.255 255.255.255.255 On-link 192.168.75.117 258
192.168.254.0 255.255.255.0 On-link 192.168.254.120 1255
192.168.254.120 255.255.255.255 On-link 192.168.254.120 1255
192.168.254.255 255.255.255.255 On-link 192.168.254.120 1255
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.75.117 258
224.0.0.0 240.0.0.0 On-link 192.168.254.120 1255
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.75.117 258
255.255.255.255 255.255.255.255 On-link 192.168.254.120 1255
===========================================================================
Persistent Routes:
None
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
1 306 ff00::/8 On-link
===========================================================================
Persistent Routes:
None
My LAN is connected to a router that makes a connection to my office. The wifi is connected to my home wifi.
So if I connected to something in the office and then turn on the wifi i get immediately disconnected and can't get back in until i turn off the wifi. I can also run nslookup and with the wifi turned on it always goes to the wifi router. I use
the wifi to access a shared storage i use with other computers in my house.
At one time this did work with this setup but last week i swapped out my drive for a larger one and re installed windows, hasn't worked since.

Hi,
As this setup did work at one time, so I think all settings you made is right, according to your description, the issue happened after you reinstall Windows, the system might lose some important updates, I suggest you check for updates, and keep all important
updates. Meanwhile, please reinstsall the network adapter driver as a test, it's recommended to look for the driver in the manufacture website.
Yolanda Zhu
TechNet Community Support

Similar Messages

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers?
I was not able to find profile manager on my employer's installation of 10.6 Server. Is this only a feature of 10.7/10.8 server?

10.6 server does not have profile manager, profile manager is only available in 10/7 and 10.8 server
for 10.6 server you'll need to use wgm and server admin
printer management with 10.6, I recommend you read the relevant server manuals regarding
print server and user management, printer management

Two network adapters and Real Application Cluster

Hello
I have got one problem. I have got 2 computers and each of them has got only 1 network adapter. Is it possible to make Cluster having only 1 network adapter on each node?
Do 2 adapters are needed (they must be)? I know that I can add two different IP addresses to one network adapter. Another question is: is it possible to make two networks (private and public in Oracle 10g )on one adapter to create cluster? If it is ,please expalin how to do it or give a link,please . I will be happy then :)
user502165

You need two network adapter which is separate from creating two VIPs for the same adapter

My iphone 4 won't turn on unless it is plugged into the wall. Also, my iphone won't let me turn on the wi-fi. And another problem is that it sometimes says "searching..." but it still works. And I already reseted the network setting and all settings.

Please help

Hello there, JP3199.
You've mentioned a few issues in your post so I will try to offer up some recommendations for troubleshooting each. In regards to the issue of not powering on unless plugged in the following Knowledge Base article offers some practical steps to try:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
In regard to being unable to turn on Wi-Fi, if you mean that the button is grayed out, then this article should prove useful:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Follow these steps to resolve the issue:
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, see how to resolve those Wi-Fi issues.
Lastly, this article should help with troubleshooting cellular network connection on your iOS device:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Round robin DNS for load balancing between multiple network adapters (Xserve)

I'm attempting to use 'round robin' DNS to load balance between the two ethernet adapters of an Xserve.
Both ethernet adapters are connected to the same LAN and have static IP addresses of 192.168.2.250 and 192.168.2.251.
The DNS zone for the server's local domain/host (macserver.private) has a machine record with both IP addresses (set up in the Lion Server UI).
Having read up on round robin DNS, I would have expected DNS requests for 'macserver.private' to be answered with the two IP addresses ordered at random, achiving my aim of requests being served at random via each ethernet adapter.
However this doesn't seem to be the case. Doing a 'nslookup' from any of the network clients results in the two IP addresses being listed in the same order everytime. And pinging 'macserver.private' only ever results in a response from the same address.
Does anyone know why this is the case? Does Lion Server use a non-standard DNS configuration? Are there any additional settings I need to configure in Lion's DNS server to make adopt a round robin approach to responding to requests?
Thanks in advance for any help!

Be careful what you wish for
Round Robin DNS is rarely the best option for 'load balancing'. At the very least it's subject to caching at various point on the network - even at the client side, once the client looks up the address it will cache that response - this means that subsequent lookups may be served from the client's cache and not refer back to the server. Therfore any given client will always see the same address until the cache expires.
I suspect this is what you're seeing.
You can minimize this by setting a lower TTL on the records. This should result in the response being cached for a shorter period, meaning the client will make more requests to the server, with a higher change of using the 'other' address.
However, you're also going to run into issues with the server having two interfaces/addresses in the same LAN. This isn't recommended.
As Jonathon mentioned, you may be better off just bonding the two interfaces. This will provide an automatic level of dynamic load balancing without the latency of DNS caches, as well as automatic failover should one link fail (as opposed to round robin DNS which will cause 50% of requests to fail until the client cache expires and a new lookup is performed (and, even then, there's still a chance the client will try to use the failed link).

Increasing file transfer speeds with multiple network adapters?

Hello,
I want to move gigabytes of data from my PC to my PowerBook G4 at a faster rate. My PC has 802.11g WiFi and 100Mb/s ethernet and I've got my Airport's WiFi and 100Mb/s ethernet on my laptop so I'd like to somehow combine these two network interfaces to speed up my file transfers. How can I do this?
I've read a little about 802.3ad link aggregation, but AFAIK this applies exclusively to 802.3 ethernet ports.
Thanks,
Shaun
PowerBook G4 Mac OS X (10.3.9)

Does your PC have a FireWire port? you can use IP over FireWire for better throughput than the wired ethernet.
You can't use link aggregation in this case since it requires multiple interfaces of the same type (e.g. two gigabit ethernet cards), but you cannot mix media such as AirPort and Ethernet.
The alternative would be to install a gigabit ethernet card in your PC. You'd at least then get gigabit ethernet speed between the two devices which is also a step up.

Using multiple network adapters simultaneously [SOLVED]

If someone could point me in the right direction with my question that would be great - I seem to not be able to google the right types of questions on this issue.
So here it goes:
I do have a wireless adpater and and 2 ethernet cards in my machine. I would like to connect to the internet using the wireless adapter and connect to the intranet using one of the ethernet adapters. There are some local websites that are only accessible on our intranet. So the browser should ideally direct to certain IPs through eth0 and to the www through wlan0. Also CUPS should go through eth0 whereas Thunderbird should go through wlan0. At the moment I bring eth0 up when I want to print and visit the intranet and then close it afterwards again - this is somewhat inconvenient though.
I'm sure there must be a way of creating rule-sets for which protocols and IP addresses are routed through which adapter. If you can provide me with a bump in the right direction I'd appreciate it.
Last edited by itburnz (2010-03-16 08:03:31)

D'Oh! Apparently there's another post that I should've read. I assume I could use the route command to set up routes. I'll toy with that and see what happens.

Networks list and settings disappeared

Can anybody tell me where to find the file that contains all the network settings that are in System Prefs> Network in my computer? I've just changed hard drives and all my networks list and their settings have disappeared.

I copied ALL 5 items form that folder to the active system and it fixed the problem. Still don;t know which of those items was the one that did it but it's fixed. Many thanks

How can I use PowerShell to Remove "Ghost" (Old Hidden) VMware Network Adapters in Windows 7?

We recently upgrade the virtual hardware of some of our VMware VM's running Windows 7. One side-effect is that in Windows on these machines, an instance of the NIC from the previous version of virtual hardware remains, as a hidden
device. This can be easily found manually on a machine by enabling Device manager to show hidden devices (registry and a menu option - View...Show Hidden Devices). You can then just right-click on the device in question and uninstall.
The problem here, like in so many other tasks, is that you may have multiple instances, on multiple machines. We had just that, and in scouring the internet for a PowerShell only script to resolve the issue, I could not find one. Therefore, I've written
my own.
This exact script is only seeking out VMware "VMXNET3" nic cards, but could be easily adapted to find Ghost NIC's for a different vendor using my example. There are also some commented lines left in to aid you as an example of how you can
test the various queries in your own environment, on a test machine, before a full-blown deployment.
NOTE: Please try this out (at your own risk - I am not responsible for how this works out for you), and please vote for my answer to this dilemma if this helped you. I'd appreciate it after all of the sweat the script took to crank out.
Thanks!
P.S. This script, of course, requires that Powershell is installed and enabled on the target computer. It then must be run as System - In our environment it is being remotely pushed through a software delivery systems, which runs this scrpt
as system.
THE SCRIPT:
CLS
#Querying WMI for Ghost NICs and Returning Criteria...
Write-Host "VMware Ghost NIC Remover" -Foreground GREEN
Write-Host "Author: Octavio Serpa AKA Octavio-Admin"
Write-Host "Copyright Octavio Serpa - Octavio-Admin - 2014"
Write-Host ""
Write-Host "Checking Powershell Version" -Foreground Yellow
$host.version
Write-Host ""
Write-Host "Searching for Ghost NIC's" -Foreground Yellow
$Ghosts = gwmi win32_NetworkAdapter | ?{$_.Description -like "vm*" -and $_.Installed -like "True" -and $_.MACAddress -eq $null}
$Ghosts | Select-Object Name,DeviceID
If ($Ghosts -NE $NULL)
  Write-Host "One or more ghost NIC'S do exist on this machine. Script will continue..." -foreground RED
  Write-Host ""
  else
  Write-Host "No ghost NIC's Found :) - Exiting..." -Foreground Green
  Write-Host ""
  EXIT 0
#Using Criteria to Obtain the GUID of each Ghost NIC
Write-Host "Getting NIC Variables" -Foreground Yellow
foreach ($_ in $Ghosts) {
  $DID = $_.DeviceID
  If ($DID -NE $NULL)
  Write-Host "The NIC DID: $DID"
  else
  Write-Host "$DID is NULL - Exiting..."
  EXIT 666
  if($DID -NOTLIKE "1*")
   Write-Host "Adding additional 0 to registry lookup since the DID is just one character..." - foreground yellow
   Write-Host ""
   $NICREG = Get-ItemProperty "hklm:\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\000$DID"
  ELSE
   $NICREG = Get-ItemProperty "hklm:\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\00$DID"
  $GUID = $NICREG.NetCfgInstanceId
  Write-Host "The NIC GUID: $GUID"
                $PNPDID = $NICREG.DeviceInstanceID
  $PNPDID = $PNPDID.Trimstart("PCI\VEN_15AD&DEV_07B0&SUBSYS_07B015AD&REV_01\")
  Write-Host "The truncated PNPDevice ID is $PNPDID"
  Write-Host ""
  Write-Host "Searching for Registry Keys that match NIC GUID: $GUID" -Foreground Yellow
  $NICREGPATH = @(1..50)
  foreach ($_ in $NICREGPATH)
   $TESTREG = Test-Path "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\$_" -Verbose
   if($TESTREG -EQ $FALSE)
    #Write-Host ""
    #Write-Host "FALSE: HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\$_ DOES NOT EXIST" -Foreground RED
    ELSE
    #Write-Host "True - NIC $_ Exists" -Foreground Green
    $NICID = $_
    $SubPath1 = 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\'+$NICID
    #Write-Host "The Sub-Key Path To Query = $SubPath1"
    $SubPath2 = 'HKLM:\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\NetworkCards\'+$NICID
    #Write-Host "The Sub-Key Path To Query = $SubPath2"
    $NICProperties = Get-ItemProperty $SubPath1
    #$NICProperties
    $Match = $NICProperties.ServiceName
    #$Match
    foreach ($_ in $Match) {
    #Write-Host "The NIC GUID found in this registry key is: $_" -Foreground Yellow
    #Write-Host ""
    if($_ -NE $GUID)
    #Write-Host "NO MATCH - THIS NIC HAS NOT BEEN TOUCHED" -Foreground GREEN
                               #Write-Host ""
    ELSE
    Write-Host "MATCH - Registry Entries for this NIC will be DELETED" -Foreground RED
    Remove-Item $SubPath1 -Recurse -ErrorAction SilentlyContinue
    Remove-Item $SubPath2 -Recurse -ErrorAction SilentlyContinue
    $CCS = @("ControlSet001", "ControlSet002")
    foreach ($_ in $CCS) {
     $CCS = $_
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Services\'+$GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Services\Tcpip\Parameters\Adapters\'+$GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Control\DeviceClasses\{ad498944-762f-11d0-8dcb-00c04fc3358c}\##?#PCI#VEN_15AD&DEV_07B0&SUBSYS_07B015AD&REV_01#$PNPDID#{ad498944-762f-11d0-8dcb-00c04fc3358c}\#'+$GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}\'+$GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\JNPRNA\Parameters\Adapters\' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\NetBT\Parameters\Interfaces\Tcpip_' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\Psched\Parameters\NdisAdapters\' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\Tcpip\Parameters\Adapters\' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\Tcpip\Parameters\DNSRegisteredAdapters\' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\Tcpip\Parameters\Interfaces\' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\WfpLwf\Parameters\NdisAdapters\' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
                                         if($DID -NOTLIKE
"1*")
              $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\000' + $DID
                         Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
       ELSE
       $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\00' + $DID
       Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Enum\PCI\VEN_15AD&DEV_07B0&SUBSYS_07B015AD&REV_01\' + $PNPDID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
#This is our Success check at the end
Write-Host ""
Write-Host "Searching for any remaining Ghost NICs:" -Foreground Yellow
          $Ghosts = gwmi win32_NetworkAdapter | ?{$_.Description -like "vm*" -and $_.Installed -like "True" -and $_.MACAddress -eq $null}
$Ghosts | Select-Object Name,DeviceID
  If ($Ghosts -NE $NULL)
  Write-Host "There is still at least one ghost NIC present. The remover script may not be functioning correctly. Please contact Octavio-Admin on Microsoft Technet Forums with any questions" -foreground RED
  Write-Host ""
  EXIT 666
  else
  Write-Host "No ghost NIC's Found :) - Exiting..." -Foreground Green
  Write-Host ""
  EXIT 0

THE SCRIPT:
CLS
#Querying WMI for Ghost NICs and Returning Criteria...
Write-Host "VMware Ghost NIC Remover" -Foreground GREEN
Write-Host "Author: Octavio Serpa AKA Octavio-Admin"
Write-Host "Copyright Octavio Serpa - Octavio-Admin - 2014"
Write-Host ""
Write-Host "Checking Powershell Version" -Foreground Yellow
$host.version
Write-Host ""
Write-Host "Searching for Ghost NIC's" -Foreground Yellow
$Ghosts = gwmi win32_NetworkAdapter | ?{$_.Description -like "vm*" -and $_.Installed -like "True" -and $_.MACAddress -eq $null}
$Ghosts | Select-Object Name,DeviceID
If ($Ghosts -NE $NULL)
Write-Host "One or more ghost NIC'S do exist on this machine. Script will continue..." -foreground RED
Write-Host ""
else
Write-Host "No ghost NIC's Found :) - Exiting..." -Foreground Green
Write-Host ""
EXIT 0
#Using Criteria to Obtain the GUID of each Ghost NIC
Write-Host "Getting NIC Variables" -Foreground Yellow
foreach ($_ in $Ghosts) {
$DID = $_.DeviceID
If ($DID -NE $NULL)
Write-Host "The NIC DID: $DID"
else
Write-Host "$DID is NULL - Exiting..."
EXIT 666
if($DID -NOTLIKE "1*")
   Write-Host "Adding additional 0 to registry lookup since the DID is just one character..." - foreground yellow
   Write-Host ""
   $NICREG = Get-ItemProperty "hklm:\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\000$DID"
ELSE
   $NICREG = Get-ItemProperty "hklm:\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\00$DID"
$GUID = $NICREG.NetCfgInstanceId
Write-Host "The NIC GUID: $GUID"
                $PNPDID = $NICREG.DeviceInstanceID
$PNPDID = $PNPDID.Trimstart("PCI\VEN_15AD&DEV_07B0&SUBSYS_07B015AD&REV_01\")
Write-Host "The truncated PNPDevice ID is $PNPDID"
Write-Host ""
Write-Host "Searching for Registry Keys that match NIC GUID: $GUID" -Foreground Yellow
$NICREGPATH = @(1..50)
foreach ($_ in $NICREGPATH)
   $TESTREG = Test-Path "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\$_" -Verbose
   if($TESTREG -EQ $FALSE)
    #Write-Host ""
    #Write-Host "FALSE: HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\$_ DOES NOT EXIST" -Foreground RED
    ELSE
    #Write-Host "True - NIC $_ Exists" -Foreground Green
    $NICID = $_
    $SubPath1 = 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\'+$NICID
    #Write-Host "The Sub-Key Path To Query = $SubPath1"
    $SubPath2 = 'HKLM:\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\NetworkCards\'+$NICID
    #Write-Host "The Sub-Key Path To Query = $SubPath2"
    $NICProperties = Get-ItemProperty $SubPath1
    #$NICProperties
    $Match = $NICProperties.ServiceName
    #$Match
    foreach ($_ in $Match) {
    #Write-Host "The NIC GUID found in this registry key is: $_" -Foreground Yellow
    #Write-Host ""
    if($_ -NE $GUID)
    #Write-Host "NO MATCH - THIS NIC HAS NOT BEEN TOUCHED" -Foreground GREEN
                                #Write-Host ""
    ELSE
    Write-Host "MATCH - Registry Entries for this NIC will be DELETED" -Foreground RED
    Remove-Item $SubPath1 -Recurse -ErrorAction SilentlyContinue
    Remove-Item $SubPath2 -Recurse -ErrorAction SilentlyContinue
    $CCS = @("ControlSet001", "ControlSet002")
    foreach ($_ in $CCS) {
     $CCS = $_
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Services\'+$GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Services\Tcpip\Parameters\Adapters\'+$GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Control\DeviceClasses\{ad498944-762f-11d0-8dcb-00c04fc3358c}\##?#PCI#VEN_15AD&DEV_07B0&SUBSYS_07B015AD&REV_01#$PNPDID#{ad498944-762f-11d0-8dcb-00c04fc3358c}\#'+$GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}\'+$GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\JNPRNA\Parameters\Adapters\' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\NetBT\Parameters\Interfaces\Tcpip_' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\Psched\Parameters\NdisAdapters\' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\Tcpip\Parameters\Adapters\' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\Tcpip\Parameters\DNSRegisteredAdapters\' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\Tcpip\Parameters\Interfaces\' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\WfpLwf\Parameters\NdisAdapters\' + $GUID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
                                         if($DID -NOTLIKE
"1*")
              $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\000' + $DID
                         Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
       ELSE
       $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\00' + $DID
       Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
     $reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Enum\PCI\VEN_15AD&DEV_07B0&SUBSYS_07B015AD&REV_01\' + $PNPDID
     Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
#This is our Success check at the end
Write-Host ""
Write-Host "Searching for any remaining Ghost NICs:" -Foreground Yellow
          $Ghosts = gwmi win32_NetworkAdapter | ?{$_.Description -like "vm*" -and $_.Installed -like "True" -and $_.MACAddress -eq $null}
$Ghosts | Select-Object Name,DeviceID
If ($Ghosts -NE $NULL)
Write-Host "There is still at least one ghost NIC present. The remover script may not be functioning correctly. Please contact Octavio-Admin on Microsoft Technet Forums with any questions" -foreground RED
Write-Host ""
EXIT 666
else
Write-Host "No ghost NIC's Found :) - Exiting..." -Foreground Green
Write-Host ""
EXIT 0
Hello Octavio,
I'm having similar issues with azure VMs (windows server 2008 and 2012). I noticed that the name of the network adapter changes every time the servers are turned off and then on.
For example every time I perform that action on each VM, the network adapter became to "Microsoft Hyper-V Network Adapter #3" (and then #4, #5, etc).
I found in to many forums that to resolve that is needed to remove Hidden (Ghost) Network Adapters and most of the people is doing that manually from the device manager (right click on the hidden network adapter and select uninstall).
Then I found this script created by you and made some changes to find Description -like "Microsoft Hyper-V Network*".
It seems to find the adapters and also remove them (based on the script results). But if I go to the device manager after restarting the server, all hidden (ghost) adapters are still there (for example Microsoft Hyper-V Network Adapter
#2, Microsoft Hyper-V Network Adapter #3, Microsoft Hyper-V Network Adapter #4, Microsoft Hyper-V Network Adapter #n).
The only thing I noticed after running the script is that, in the Control Panel -> Network and Sharing Center, the name of the adapter has no # (Now is shown as “Ethernet” and before as “Ethernet #”)
This is my script, could you please take a look and tell me if there is something wrong o missing?
CLS
#Querying WMI for Ghost NICs and Returning Criteria...
Write-Host "VMware Ghost NIC Remover" -Foreground GREEN
Write-Host "Author: Octavio Serpa AKA Octavio-Admin"
Write-Host "Copyright Octavio Serpa - Octavio-Admin - 2014"
Write-Host ""
Write-Host "Checking Powershell Version" -Foreground Yellow
$host.version
Write-Host ""
Write-Host "Searching for Ghost NIC's" -Foreground Yellow
$Ghosts = gwmi win32_NetworkAdapter | ?{$_.Description -like "Microsoft Hyper-V Network*" -and $_.Installed -like "True" -and $_.MACAddress -eq $null}
$Ghosts | Select-Object Name,DeviceID
If ($Ghosts -NE $NULL)
Write-Host "One or more ghost NIC'S do exist on this machine. Script will continue..." -foreground RED
Write-Host ""
else
Write-Host "No ghost NIC's Found :) - Exiting..." -Foreground Green
Write-Host ""
EXIT 0
#Using Criteria to Obtain the GUID of each Ghost NIC
Write-Host "Getting NIC Variables" -Foreground Yellow
foreach ($_ in $Ghosts) {
$DID = $_.DeviceID
If ($DID -NE $NULL)
Write-Host "The NIC DID: $DID"
else
Write-Host "$DID is NULL - Exiting..."
EXIT 666
if($DID -NOTLIKE "1*")
Write-Host "Adding additional 0 to registry lookup since the DID is just one character..." - foreground yellow
Write-Host ""
$NICREG = Get-ItemProperty "hklm:\SYSTEM\CurrentControlSet\Control\Class\{4d36e972-e325-11ce-bfc1-08002be10318}\000$DID"
ELSE
$NICREG = Get-ItemProperty "hklm:\SYSTEM\CurrentControlSet\Control\Class\{4d36e972-e325-11ce-bfc1-08002be10318}\00$DID"
$GUID = $NICREG.NetCfgInstanceId
Write-Host "The NIC GUID: $GUID"
$PNPDID = $NICREG.DeviceInstanceID
$PNPDID = $PNPDID.Trimstart("PCI\VEN_15AD&DEV_07B0&SUBSYS_07B015AD&REV_01\")
Write-Host "The truncated PNPDevice ID is $PNPDID"
Write-Host ""
Write-Host "Searching for Registry Keys that match NIC GUID: $GUID" -Foreground Yellow
$NICREGPATH = @(1..50)
foreach ($_ in $NICREGPATH)
$TESTREG = Test-Path "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\$_" -Verbose
if($TESTREG -EQ $FALSE)
#Write-Host ""
#Write-Host "FALSE: HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\$_ DOES NOT EXIST" -Foreground RED
ELSE
#Write-Host "True - NIC $_ Exists" -Foreground Green
$NICID = $_
$SubPath1 = 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\'+$NICID
#Write-Host "The Sub-Key Path To Query = $SubPath1"
$SubPath2 = 'HKLM:\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\NetworkCards\'+$NICID
#Write-Host "The Sub-Key Path To Query = $SubPath2"
$NICProperties = Get-ItemProperty $SubPath1
#$NICProperties
$Match = $NICProperties.ServiceName
#$Match
foreach ($_ in $Match) {
#Write-Host "The NIC GUID found in this registry key is: $_" -Foreground Yellow
#Write-Host ""
if($_ -NE $GUID)
#Write-Host "NO MATCH - THIS NIC HAS NOT BEEN TOUCHED" -Foreground GREEN
#Write-Host ""
ELSE
Write-Host "MATCH - Registry Entries for this NIC will be DELETED" -Foreground RED
Remove-Item $SubPath1 -Recurse -ErrorAction SilentlyContinue
Remove-Item $SubPath2 -Recurse -ErrorAction SilentlyContinue
$CCS = @("ControlSet001", "ControlSet002")
foreach ($_ in $CCS) {
$CCS = $_
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Services\'+$GUID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Services\Tcpip\Parameters\Adapters\'+$GUID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Control\DeviceClasses\{ad498944-762f-11d0-8dcb-00c04fc3358c}\##?#PCI#VEN_15AD&DEV_07B0&SUBSYS_07B015AD&REV_01#$PNPDID#{ad498944-762f-11d0-8dcb-00c04fc3358c}\#'+$GUID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}\'+$GUID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\JNPRNA\Parameters\Adapters\' + $GUID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\NetBT\Parameters\Interfaces\Tcpip_' + $GUID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\Psched\Parameters\NdisAdapters\' + $GUID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\Tcpip\Parameters\Adapters\' + $GUID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\Tcpip\Parameters\DNSRegisteredAdapters\' + $GUID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\Tcpip\Parameters\Interfaces\' + $GUID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\services\WfpLwf\Parameters\NdisAdapters\' + $GUID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
if($DID -NOTLIKE "1*")
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\000' + $DID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
ELSE
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\00' + $DID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
$reg1 = 'HKLM:\SYSTEM\' + $CCS + '\Enum\PCI\VEN_15AD&DEV_07B0&SUBSYS_07B015AD&REV_01\' + $PNPDID
Remove-Item $reg1 -Recurse -ErrorAction SilentlyContinue -verbose
#This is our Success check at the end
Write-Host ""
Write-Host "Searching for any remaining Ghost NICs:" -Foreground Yellow
$Ghosts = gwmi win32_NetworkAdapter | ?{$_.Description -like "Microsoft Hyper-V Network*" -and $_.Installed -like "True" -and $_.MACAddress -eq $null}
$Ghosts | Select-Object Name,DeviceID
If ($Ghosts -NE $NULL)
Write-Host "There is still at least one ghost NIC present. The remover script may not be functioning correctly. Please contact Octavio-Admin on Microsoft Technet Forums with any questions" -foreground RED
Write-Host ""
EXIT 666
else
Write-Host "No ghost NIC's Found :) - Exiting..." -Foreground Green
Write-Host ""
EXIT 0

My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

New 13" Macbook Pro trying to connect to a Panasonic VIERA TC-L42U30 as second monitor. I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. The Macbook does not sense the second monitor (TV). Help?!

I've been a Mac since 2008, so I know my way around the system pretty well. This issue, however, has me stumped. I had an iMac until now and only now am I experiencing some difficulty with my new MacBook Pro. The model I have is the newest 13" Macbook Pro model and I'm trying to connect a Panasonic VIERA TC-L42U30 42" HDTV as a second monitor via the Thunderbolt port.
It worked the first two times and hasn't worked since, after 10-15 attempts with different configurations, turning things on n off, restarting the mac, unplugging the cables, adapters, TV, resetting the P RAM, etc... I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. No matter what I do, the Macbook does not sense the TV as a second monitor anymore.
I took the MacBook Pro to the Apple Store, and their "genius" there had it working fine with a DVI connection to a regular monitor. The Panasonic TV I have has HDMI connections and one VGA connection which does not support HD, but no DVI option. I want an HD connection to mirror or extend my MacBook Pro screen. At the Apple Store, they didn't have a Thunderbolt/Mini DisplayPort to HDMI adapter, so he could not try that out for me.
Anyone else have this configuration or another similar one with a Panasonic HDTV?
Ideas? Suggestions? Anything?! Help!!
P.S. I'm running Mountain Lion, if that wasn't already obvious. Everything is up to date in my App Store as well.
Thanks!

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

After upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings general Network says Not Available Why is this? Did the upgrade cause this?

after upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings>general>Network>says Not Available Why is this? Did the upgrade cause this?
steve

See this tip --> http://support.apple.com/kb/TS1559
If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it.

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you hel

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.

Removing Logical Networks and Subnets from Hyper-V Host Network Adapters that are greyed out

Hello All
I am new to SCVMM 2012 R2 and I have create a Hyper-V Cluster and now creating Logical Networks and Port Profiles and Logical Switches. I have figured out how to create all of them properly now, but I have made some mistakes in the past. I have a Logical
Switch created and assigned to network adapters on the hosts. Now I am trying to add the other switches to other adapters, but I have associations on network adapters to Logical Switches and Subnets that are not correct and need to be removed so I can add
the correct ones, but in the console the network adapters that I need to work with the information is grayed out and I can't change the information.
I am not an expert at Powershell. Below you can see a Logical Network and Sunets associated
to a Network adapter. Can someone help figure out how to remove the information so I can assign the correct Logical Network?
I woul so much appreciate this. I know there is a way to do this in
PowerShell but I don't know Powershell that much. I
am savoing all the
powershell scripts ever time I configure something in SCVMM but I have had no luck trying to
revearse what I did.
Help Please
Christopher
Christopher Scannell

This shows that an Uplink profile associated with this host, links to these logical networks. In order to remove this successfully, you must remove the logical switch and uplink deployed to the hosts.
For a complete overview and guidance on the required configuration, have a look at the whitepaper we created.
http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown. Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching f

I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
Prior to updating to iOs 6.3.1 my system worked perfectly.
Can anybody help please.

1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Multiple network adapters and metric settings

Similar Messages

Maybe you are looking for