Multiple NIC Issues

Hello everyone. I'm in the process of certifying a system with four dual-port gigabit ethernet ports. I can pass all tests with only one of those dual-port cards enabled, but when I have any more I fail the test.
My question is has anybody had any luck with >2 NICS using the same driver? Specifically an Intel e1000g driver?
-James

Kevin, will this fix the problems with trying to do installations with
multiple NICs, or is that still out there??
"KBOYLE" <[email protected]> wrote in message
news:[email protected]..
>
> The developers have apparently resolved this issue in an upcoming patch.
> When the patch is applied you will be able to:
>
>
> - Click on Advanced Settings to list all Network Interfaces.
> - Select the radio button corresponding to the network interface you
> would like simba to use
> - Select/de-select network interfaces you do/do not want to be
> touched.
>
> I don't know when the patch will be released into the channel. You will
> know that the patch has been applied by checking from a terminal console
> what revision of Simba is installed.
> Code:
> --------------------
> server:~ # rpm -q simba
> simba-2.5-r1921
>
> --------------------
>
>
> --
> Kevin Boyle
> ------------------------------------------------------------------------
> KBOYLE's Profile: http://forums.novell.com/member.php?userid=19359
> View this thread: http://forums.novell.com/showthread.php?t=404451
>

Similar Messages

Multiple nics on server

Remote control will not work on server with multiple nics. Currently
running Neware 5.1 with Zen 3.2. Zen 3.2 sp2 mentions this problem
but I
would rather not install sp2 if there is an easy fix. Any ideas?

Mike,
It appears that in the past few days you have not received a response
to your posting. That concerns us, and has triggered this automated
reply.
Has your problem been resolved? If not, you might try one of the
following options:
- Do a search of our knowledgebase at
http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com in both the "free product support" and "paid
product support" drop down boxes.
- You could also try posting your message again. Make sure it is
posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept
our apologies and rest assured we will issue a stern reprimand to our
posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

ACS 5.4 Multiple NIC Questions

I've read that 5.4 includes support for multiple NICs (appliance and VM). My question is what can these NICs be used for? I know one must be a dedicated management link, and the other three support TACACS/RADIUS. Does this mean that each NIC can have a separate IP address and thus act as a separate AAA target or are the links just used for aggregation?
If this posts answers your question or is helpful, please consider rating it and/or marking as answered.

Hi Chris,
If you're running 1121 with ACS 5.4 and looking at Table 4-4     ACS 5.4 Functional Interface Distribution Among Network Interfaces. then the answer is that you may set up any interface for tacacs/radius authentication. However, management interface should be setup for gig0 only. Currently, it doesn't support NIC teaming/bonding. However, it sometimes create issues with replication.
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.4/installation/guide/csacs_hw_ins.html#wp1179311
In case you are running 3415 appliance, the only difference is that it supports reduduncy but that only applies for Cisco Integrated Management Interface (CIMC)
step 4. Set the NIC mode to your choice for which ports to use to access the CIMC for server management
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/installation/guide/csacs_hw_ins_ucs.html#wp1188250
Hope this helps.
~BR
Jatin Katyal
**Do rate helpful posts**

Multiple NICs?

Hey; can miggui handle source and target servers with multiple NICs/IP addresses? I have a DNS/DHCP server to migrate that services two separate VLANs, and I want to make sure I'm not going to blow the whole thing sky-high.
Thanks.

The Migration DHCP leases file issue has been fixed in the jumbo patch that just went into the oes2sp1 and sp2 updated channels a couple days ago. (bug 561928 - issue below).
Steps to Reproduce:
1. Setup NW server (6.5 SP 7 in this case)
2. Setup OES server in the same tree. Remove edir replicas.
3. Setup DHCP on both servers. NW should be configured with a range of 2
address. OES should have the dhcp server setup.
4. Run a windows client with one nic. Get a DHCP address and note the ip
address given.
5. Run the Novell Migration for DHCP (transfer ID option). Choose the
server-level migration.
6. Run the migration, and then run the post migration step per the
documentation.
7. Start DHCP on the OES box and watch the /var/log/messages. Restart or
/release /renew the address from the client. It will not get the same address
as before, but the second address in the pool. Drop the client and add a v-nic
(if vmware), or have another client try and grab an address. The DHCP server
will say it is out of leases, when in reality the first lease is not being
honored.
Actual Results:
See above
Expected Results:
Expected the first client to get its original DHCP assigned address back,
therefore leaving the remaining addresses in the pool open to new clients.

DataSocket fails intermittently with multiple NICs enabled using LV7.1

Using LV7.1 and Datasocket v4.2, I was intermittently (but quite often) having problems reading and writing to the datasocket server (primarily from the server side). My application should read the value in the item and upon finding a specific string it should immediately follow it with a write of a default string. However, it can find the same string multiple times and not complete the write. Logging the errors from the write shows that no error is occurring. The client is not at fault because it only writes the string once every few minutes. I was able to finally show that by disabling the extra NIC on my system running the datasocket server that the connection seems to operate reliably. Both NICs
were set to static IP addresses, but only one was connected. I do have the program writing to "dstp://localhost/UUT" as opposed to a specific IP address (not sure if it matters).
With Labview6.1 I did not have this problem. It was only after I re-compiled my application with LV7.1 that I started having issues.

Philip,
I do not feel I am running out of bandwidth since I have run it successfully on 1Gbit NIC connections on a P4 2.4GHz system as well as a 10/100Gbit NIC on an old 650MHz system with LV6.1. I only do two writes per variable (on up to 8 variables) once every few minutes. I did not seem to be a re-entrant VI issue.
I have created two VIs which should allow you to recreate the failing conditions with multiple NICs enabled. It responds very quickly with one NIC enabled, but when one or two more NICs is enabled, it gets very slow to respond and has some timeouts.
One VI is the writer, the other is the reader. Start both VIs and start all 8 reader loops. Then you can consecutive
ly click on all 8 sender loops. Doing this with and without multiple NICs enabled should show you the problem.
Note: I think the issue I was talking about in earlier posts about getting multiple strings back before it wrote out "Loop" was due to the fact that the writes were not occurring quickly enough and the reads were happening multiple times. Therefore, in these VIs, I revised the read and close timeouts to -1.
I think it would be best if you could call me so we can discuss this issue. If you can email me, I will send you my contact information if you don't already have access to it.
Attachments:
ReadSocket_Multiple_MSHv1.vi ‏360 KB
WriteSocket_Multiple_MSHv1.vi ‏216 KB

Select TCP UDP route to multiple NIC

I have two NIC cards (Broadcom & Realtek) installed in my system (Windows XP x64) running LV 8.6 Dev Suite. Whenever I send/receive TCP or UDP traffic, labview always uses the broadcom card. Is there a way to work around this issue so I specify which NIC to use? This is a big deal for me because I'm required to utilize multiple NIC cards for my works. Thanks

Since at least LaVIEW 8.5 there is an extra input "net address" on the TCP Create Listener and UDP Open that allows you to define the network address to bind the underlaying socket to. You shouldn't need that for TCP Open Connection since at connection establishment the according interface is selected automatically based on the routing requirements for the specified remote address.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

ISE 1.2 - Multiple NICs/Load Balancing for DHCP Probe

Hello guys
Just prepping an ISE 1.2 patch 8 setup in our organization. I am going for the virtual appliances with multiple NICs. It will be a distributed deployment with 4 x PSNs behind a load balancer and there is no requirement for wireless or guest user at the moment. I've got 2 points I will like to get some guidance on:
Our DC has a dedicated mgmt network and I plan to IP the gig0 interface of the PANs, MNTs and PSNs from this subnet. All device admin, clustering, config replication, etc will be over this interface. However, RADIUS/probe/other user traffic to the ISE PSNs will be over the gig1 interface which will be addressed from another L3 network. Is this a supported configuration in ISE?
I intend to use the DHCP probe as part of device profiling and will ideally like to have just an additional ip helper to add to our switch SVI config. Also, it will appear that WLCs can only be configured for 2 DHCP servers for a given network so another consideration for when we bringing our WLAN in scope. We however use ACE load balancers within our DC and from what I have read, they do not support DHCP load balancing. Are there any workarounds to using the DHCP probe with multiple PSNs without having to add each node as an ip helper/DHCP server on the NADs?
Thanks in advance
Sayre

Hello Sayre-
For Question #1:
Management is restricted to GigabitEthernet 0 and that cannot be changed so you should be good there
You can configure Radius and Profiling to be enabled on other interfaces
Even though you are not using guest services yet, you can dedicate an interface just for that. As a result, you can separate guest traffic completely from your production network
Take a look at this link for more info:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_app_c-ports.html
For Question #2
If you are using a Cisco WLC and running code 7.4 and newer you don't need to mess with the IP helper configurations.
The controller can be configured to act as a collector for client profiling and interact with the DHCP thread along with the RADIUS accounting task that is running on the controller. The controller receives a copy of the DHCP request packet sent from the DHCP thread and parses the DHCP packet for two options:
–Option 12—HostName of the client
–Option 60—The Vendor Class Identifier
After this information is gathered from the DHCP_REQUEST packet, a message is formed by the controller with these option fields and is sent to the RADIUS accounting thread, which is in turn transmitted to the ISE in the form of an interim accounting message.
Both DHCP and HTTP profiling settings are located under the "Advanced" configuration tab in the WLC
On the other hand, you can also use Anycast for profiling. You can check out some of Cisco Live's sessions for more info on that. Here is one that is from a couple of years (There are more recent ones that are available as well):
http://www.alcatron.net/Cisco%20Live%202013%20Melbourne/Cisco%20Live%20Content/Security/BRKSEC-3040%20%20Advanced%20ISE%20and%20Secure%20Access%20Deployment.pdf
I hope this helps!
Thank you for rating helpful posts!

Multiple OS issues with Email set up; "People" ; Synching phone not working as advertised

Nokia Lumia 822
Purchased yesterday (2/10/13)
So far I have spent 14 hours attempting to resolve what feel like endless errors and bugs. If I can;t get these resolved in the next 48 hours the phone goes back. I am so disappointed I waited especially for this phone - heard great stuff. My experience is it sucks. Worst phone ever.
1) POP3 email accounts are non functional. I have attempted to set up and delete and re-set up now multiple times. Each time presents a fresh new nightmare.
Issue 1 - Email account receives email but will not send. Error message goes something like <" Problem sending message. Message failed to send. Problem with Files or Data on your device." >
Issue 2 - Tapping email + accounts sends me back to start screen cannot even set up account
Issue 3 - I get to add email account I enter my information but no account is created
Issue 4 - I set up an account and I get an error message stating my information cannot be found.
Issue 5 - trying to open email from start screen just resets to start screen over and over and over NEVER opens the account.
These are deal breaker issues. I have multiple email accounts on different platforms. If I cannot access my various emails AND send from those accounts this is NOT the phone for me.
2) PEOPLE does not function. ALSO multiple various issues and never the same one twice.
Issue 1 - I tap on a contact and get sent to the start screen over and over and over and over again.
Issue 2 I tap on a contact and the phone freezes and wont respond unless I pull the battery
Issue 3 I open a contact and make an edit, save the contact but the change is never reflected in the list
Issue 4 I try and search for a contact and the search freezes - only option is to return to start screen
3) Scrolling thru any APP randomly takes me back to start screen.
I dread attempting to synch Outlook calendar and contacts on my PC to hotmail - especially if I can't even set up email. And it seems like even holding it will jettison me out of anything I'm doing and back to start screen.
If I can't get these issues resolved. look like I'll be going back to my 3 year old Blackberry Bold which performed flawlessly. It may not be the most impressive phone out there but it did what I needed it to do with out any issues.

Interesting Twitter conversation VZWSupport on Twitter. It was suggested to try a HARD reset - and if that doesn't work take the phone back.
Since I don;t have anything set up yet that's my solution.
I see a BlackBerry Z10 in my future

Weblogic Cluster on a machine with multiple NIC

Out Setup
          One Quad Machine
          2 NIC - one ip address on each
          Two weblogic installations
          Each Instance is listening on one address and port 7001.(managed servers)
          Admin Server on one of the ip and port 8001
          Both managed servers part of a cluster.
          While i check weblogic console i see both the managed server
          having almost same number of frames incoming and outgoing.
          If i check 4 processers all 4 of them working eqaully same
          during out load test..(almost 85%)
          But i check NICs only one of them seems to be working really hard..
          and another one so..so.. what could be the problem??


          Weblogic 7 has a new concept called network channel, where there is a section talking
          about clustering over multiple NIC cards. I was confused by the cluster address in
          customized network channel (no example there). I tried to use multiple NIC cards
          for the purpose of network failover, but failed in clustering environment, although
          I succeed in single server environment.
          Kumar Allamraju <[email protected]> wrote:
          >You can set Interface address via admin console's
          >Cluster >> {Cluster Name }
          >
          >on the right hand side you will find InterfaceAddress box.
          >
          >--
          >Kumar
          >
          >zevit wrote:
          >
          >>>It's the JVM & OS who will take adv. of multiple NIC's. We don't have
          >>>anything in WLS that does this thing.
          >>>
          >>>Alternatively you can bind each WLS instance to a specific NIC card
          >>>to effeciently utilize each NIC card.
          >>>
          >>
          >> thank u kumar.. Could u please tell me how do i bind each WSL instance
          >> to a specific NIC ?
          >>
          >

Bonjour not finding anything from PC with Multiple NICs

We have two Network Interface Cards in each workstation at work to access two separate Physical Networks. Both networks provide access to ZeroConf (Bonjour) IP Printers.
Bonjour discovery fails intermittently on the two different networks. Occasionally Printers on one network, the other network, both or neither are visible from various workstations.
Is mDNSResponder aware of multiple NICs? Is there a way to force mDNSResponder to only search for printers on a particular subnet?

The second network adapter was installed after the VPC, indeed.
In the dropdown menu in the VPC networking settings there was only one network adapter to chose because the description for both physical network cards were the same. Therefore I cannot assign for virtual NICs different physical network adapters.
Finally I coped with the problem:
- I uninstalled one of the adapters (removing the drivers, too),
- edited the INF file in the adapter drivers and changed the description of the adapter
- I reinstalled the adapter with the altered driver (with the INF file changed).
Then, in the VPC networking settings both physical adapters appeared (one with the altered description).
I Wonder if that will cause any problems later ;)
Thanks for your replies :)

WOL question. SCCM server with multiple nics.

Hi,
I have a sccm server with multiple nics, I can wake up any machine using a 3ed party magic packet utility, if I set a schedule and use sccm wol functionally the machine never wakes up. As I pointed out my server has multiple nics, does anyone have a sccm
server with multiple nics with sccm built in wol functionally working?. I am curious on how you achieved this.

Hey Garth,
Yes the problem is solved but we had to buy a 3rd party power management utility to accomplish WOL. Because we have many different subnets in our environment we found that this was the fastest way to get WOL working,
So out of the box SCCM would not work for us, with a 3rd party utility that had an SCCM plugin WOL now works flawlessly.

Detecting multiple NIC's

Hi,
On Windows, a call to gethostname(), followed by
the call to gethostbyname(), will return the hostent
structure where the
h_addr_list[0] .... [1] .. etc, will list all the NICS that
were detected on the host system.
I tried running the same program on Solaris 2.6 which has multiple NICS and the call returned with only a listing for h_addr_list[0] ... and nothing else.
What might be the equivalent call that might do the same work on Solaris .... ?
thanks,
ritesh

Hi Sir,
Sorry for the dealy .
Please run the following command to check what physical NIC was bound to external virtual switch:
PS C:\Users\administrator.SERVERLAB> get-vmswitch
Name SwitchType NetAdapterInterfaceDescription
Internal Internal
New Virtual Switch for andy Internal
qostest Internal
team2 Internal
External External Intel(R) 82579LM Gigabit Network Connection
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Set DNS to automatic across multiple NIC's

I have a client with 100(ish) computers. Whoever their IT firm was before us has manually set DNS on most of these computers. I would like to set all NICs on all computers to dynamic, and pull the DNS server address from DHCP server. The problem is I can't
use netsh because it would require the network adapter name. There are multiple NICs on the computers, some are named Ethernet, some are named Local Area Connection, ect.
Is there a way to script this with powershell? I know I can use
Set-DnsClientServerAddress –InterfaceIndex ? -ResetServerAddressesbut I need the interface index, which will be different across various computers. Can I pipe the output of get-netadapter (which shows if index) and input all of them?Any help is appreciated. Thank you!

If you define the DNS servers in DHCP the clients will use it.
With PowerShell you can set the client to use DHCP. look in Gallery for numerous scripts that will do this.
¯\_(ツ)_/¯
Thank you JRV for the prompt response! I have a script that forces all adapters to use DHCP, which does change them from static to DHCP, but this does not change the DNS servers. I was able to get the DNS servers reset to automatic by using
Get-NetAdapter | Set-DnsClientServerAddress -ResetServerAddresses
thanks to Jordan Mills in the Powershell forum. Also, thank you for the script, but most clients here are Windows 7, but I did not specify. Thanks again for the help!

Multiple Goods Issue documents for single delivery?

Hi
I am getting multiple goods issue documents for single delivery.
In a order there are 3 line items, and one delivery is created and 3 goods issue documents.
What is the probable reasons for this.
The requirement is for one order with n items there should be one delivery document and one goods issue document.
Inputs requested.

Since you havent put the issue in details, I have listed my guessses.
This may be happening due to mainly these three reasons. Please answer them and get back to me.
1) The three Good issue may be happeneing due to split delivery active for the item. If yes then correction should be in the Material master.
2) the availability check scheduled is set in that way. If yes please configure the availability and transfer of requirement.
3) Scheduling of the goods throught that particular shipping point. If yes then please conficgure the shipping tab in Logistic Execution.
Please let me know if the problem persists and award points if solved.
Thanks
Adi

My dv5 laptop has an internal "typing" noise/multiple security issues

I'm not sure if this is a problem, but since I've had all kinds of issues with this particular model (the first Pavilion we were sent by HP had to be returned because the engineers finally deemed it unfixable), I thought I'd ask. I'm a little nervous about a sound that makes me think of little gremlins inside the unit typing away. It's not constant, but I'm wondering if that's normal and what the noise is.
Another problem is that periodically I'll get a message about the computer having "multiple security issues". I then do a virus scan, which turns out fine, so I don't know what it means.

The Intel chipset issue is not at all related for your Notebook. Its quite unfortunate you are facing this problem as I would say its a coincidence that even your second hard drive went bad so soon.
Time for you to RMA the new hard drive.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Multiple NIC Issues

Similar Messages

Maybe you are looking for