Multiple NICs for one virtual network (need better then 1GB)

I just finished deploying a new two node cluster. The network part is as follows:
New-NetLBFOTeam –Name ConvergedNetTeam –TeamMembers pNIC-300,pNIC-301,pNIC-400,pNIC-401,pNIC-901 –TeamingMode SwitchIndependent –LoadBalancingAlgorithm Dynamic -confirm:$false
Set-NetLbfoTeamMember -Name pNIC-901 -Team ConvergedNetTeam -AdministrativeMode Standby
New-VMSwitch "ConvergedNetSwitch" –NetAdapterName "ConvergedNetTeam" –AllowManagementOS 0 –MinimumBandwidthMode Weight
Set-VMSwitch "ConvergedNetSwitch" –DefaultFlowMinimumBandwidthWeight 50
Add-VMNetworkAdapter -ManagementOS -Name "Management" -SwitchName "ConvergedNetSwitch"
Set-VMNetworkAdapter -ManagementOS -Name "Management" -MinimumBandwidthWeight 10
Add-VMNetworkAdapter -ManagementOS -Name "LAN" -SwitchName "ConvergedNetSwitch"
Set-VMNetworkAdapter -ManagementOS -Name "LAN" -MinimumBandwidthWeight 10
Add-VMNetworkAdapter -ManagementOS -Name "Cluster" -SwitchName "ConvergedNetSwitch"
Set-VMNetworkAdapter -ManagementOS -Name "Cluster" -MinimumBandwidthWeight 10
Add-VMNetworkAdapter -ManagementOS -Name "Live Migration" -SwitchName "ConvergedNetSwitch"
Set-VMNetworkAdapter -ManagementOS -Name "Live Migration" -MinimumBandwidthWeight 40
Start-Sleep -s 15
New-NetIPAddress -InterfaceAlias "vEthernet (Management)" -IPAddress 10.10.0.66 -PrefixLength 24 -DefaultGateway 10.10.0.1
Set-DnsClientServerAddress -InterfaceAlias "vEthernet (Management)" -ServerAddresses "10.10.0.47,10.10.0.53,192.168.2.51"
New-NetIPAddress -InterfaceAlias "vEthernet (LAN)" -IPAddress 10.10.1.66 -PrefixLength 24
New-NetIPAddress -InterfaceAlias "vEthernet (Cluster)" -IPAddress 192.168.4.66 -PrefixLength 24
New-NetIPAddress -InterfaceAlias "vEthernet (Live Migration)" -IPAddress 192.168.5.66 -PrefixLength 24
Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "Management" -Access -VlanId 150
Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "LAN" -Access -VlanId 100
Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "Cluster" -Access -VlanId 400
Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "Live Migration" -Access -VlanId 500
I'm unable to achive speeds greater then 1GB on any of the individual virtual networks. For example I get 1GB on the Management network and I get 1GB on the Live Migration network, but would appreciate some guidance how I should change the above commands
so I can get for example 2GB's on the Management network. When testing I am copying to different hosts (multiple streams).

Hi CypherMike,
I 'm afraid you need to configure your Teaming mode to "Switch Dependent" "Address Hash" ,also the physical switch ports need corresponding configuration .
Specifically, I've seen the following usage scenarios arise where a switch dependent team mode is needed:
Physical servers with heavy inbound AND outbound network load
Virtual Machines that have a network load
greater than the bandwidth capacity of one NIC in the team
In these scenarios, you can configure the NIC team to use one of the "Switch Dependent" team modes by configuring the "Teaming Mode" to either of the following values:
LACP - if your network switch supports the Link Aggregation Control Protocol ( aka., 802.1ax ) for dynamic link aggregation.
Static - if your network switch doesn't support LACP and requires a static link aggregation configuration
Note that when configuring one of these "Switch Dependent" modes, you'll also need to configure your network switch to appropriately handle traffic the network team.
Please refer to following blog:
http://blogs.technet.com/b/keithmayer/archive/2012/10/16/nic-teaming-in-windows-server-2012-do-i-need-to-configure-my-switch.aspx#.UsU-6ySQ-M9
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • How do i scan multiple pages for one attachment

    I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

    Hi dagda24,
    You can scan multiple pages into a single document with the scan to PDF option.  Use the following steps to do so:
    1.  Open MP Navigator.
    2.  Click One Clcik.
    3.  Click Save to PC.
    4.  Change the File Type from PDF to PDF (multiple pages).
    5.  Make any other changes as needed, then click scan.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • On my contact list I have multiple names for one person

    On my contact list I have multiple names for one person.

    The Account Owner can see the call/text logs for all lines on the account, but each line needs its own My Verizon account for messaging and backups.  Those lines will be listed as Account Members and will have limited info. available to them regarding the account.

  • Can you have multiple users for one account?

    Can you have multiple users for one account? if so how do you set it up.
    We are using it for our department and it would be great to see who created what form instead of it being all one name.

    Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
    More information on how to share :
    http://forums.adobe.com/docs/DOC-2462
    Information on how to copy a forms to a different account :
    http://forums.adobe.com/docs/DOC-1390
    Hope this helps
    Gen

  • How to open multiple sessions for one user?

    Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
    When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 1
    update my_table set col1 = 0 where row_id = 1
    select col1 from my_table where row_id = 1
    -- shows result is 0and then enter into the second worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
    I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
    Re: Help with Procedure
    Edited by: tem on Apr 18, 2012 6:44 AM

    Thanks Jim,
    Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
    This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
    I don't see an option for "Worksheet".
    UPDATE:
    OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
    select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
    Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
    Edited by: tem on Apr 18, 2012 8:00 AM

  • Multiple Values For one Condition in Choose From List

    I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

    Hi,
    Check this thread
    How to set a Multiple condition in a single CFL
    Hope that helps,
    Vasu Natari.

  • Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,it wouldn't need to ask t

    Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,Apple wouldn't need to ask the stupid question"Do you want to reopen Aperture?" to begin with. Anyone out there having the same annoying problem?? I like Aperture or used to anyway,but if this nonsense continues, I will be forced to buy some other editor besides "No hanging fruit - Adobe photoshop CS5" or "I don't like you so I'm shutting down - Aperture".

    Hello,
    sorry to hear about your troubles, but we will need to have more technical information about your problem to be able to help you:
    There may be several reasons that can cause Aperture to crash on start up:
    You may have imported an image (or video) in an encoding that Aperture does not support, or that is larger than 2 GB, or that is corrupted and Aperture cannot process it
    Your Aperture Library or Preferences may have been corrupted
    Or you are having a system wide problem with your machine.
    Or you may simple be running out of disk space.
    It would help, if you could post the crash log from your last crash. Also, more details on your Aperture Library: Is it managed or references? how large is it? Is it on your system drive or on an external drive?
    What have you done, shortly before the trouble started? Have you imported new images or videos? Did you install any plug-ins or any new software, lile Final Cut?
    Try, if you can get Aperture to launch, if you defer the generation of Previews: Hold down the SHIFT-key immediately after you start Aperture to prevent preview generation for that session. If a damaged image in your library is preventing normal opening, this may allow you to start Aperture. If this succeeds, try to identify the broken image or video among the images you recently imported and remove it from the library.
    Regards
    Léonie
    Don't you think your user name is a little bit tactless in an Apple provided forum?

  • Multiple Labels for One Order

    Can anybody tell me if it is possible to produce multiple labels for one order. For example a customer orders 4 units. A standard package holds 3 units so an additional package is required for the fourth unit. As a result two packing labels are required. Does OM 11i support this?

    Hi Aj
    Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
    I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
    I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
    PLease confirm your thoughts.
    Regards
    Jai

  • Multiple currency for one vendor

    Hi,
    Is there any way to have multiple currency for one Vendor?

    Hi Siva,
    Yes, It is possible to maintain multiple currency for one vendor. How ? The procedure as follows.
    During vendor creation using T-code XK01 and currency enter input data screen select Extra option on the top of the screen click and display  'Add Purchasing Data'  option click opened new screen and give input data plant, tick mark of the option Data retent.at plant level allowed and tick for OK.
    After that, you have enter multiple currency for the same vendor during vendor creation time, then you will create PO using T-code ME21N the currency field you have fill as you required currency by default first currency of vendor created will be display.
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • Multiple choose for one parameter

    Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
    Select ....
    where ....
    content.style IN (:p_style)
    (content.style is a column in table "content", and "p_style" is a bind variable)
    i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
    Li

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by whl:
    Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
    Select ....
    where ....
    content.style IN (:p_style)
    (content.style is a column in table "content", and "p_style" is a bind variable)
    i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
    Li<HR></BLOCKQUOTE>
    you can do that by flowing the stap
    at first you will write a select statement
    select ...
    From ...
    where Style (colomn name) = &style1
    then you create a user parameter soupose wich name is P_style and which valus is x, y, and z you should enter another value soupose that name is 'All' (All means x + y + Z)
    then you write in after parameter form trigger...
    IF :P_style = 'All' then
    :style1 := null;
    Else :style1 := 'and style (style means your column name) = :P_style;
    end if;
    null

  • Multiple Vendors for one Document Number in BW

    Hello All,
    We are getting Multiple Vendors for one document in BW. In R/3, standard table and RSA3, we are able to see correct vendor where as when it is coming into BW it is showing incorrect vendor in PSA and Data Target.
    All issues are coming for Process Key 1 only.
    *For Example:*
    Document: 9400000007
    Schedule Line:1
    Doc Item: 1
    Vendor:
    0010019229 - Incorrect Vendor
    0010018962 - Correct Vendor
    Committed Quantity: 0
    Doc Type:
    ZNB
    ZNPP
    Process Key: 1
    Not sure how to upload screen shot.
    Please suggest.
    Thanks,
    Vijay

    Hi ,
    Are you loading for the first time ? If yes have you checked Transaction BF11 settings.
    Regards
    Rahul Bindroo

  • Multiple payers for one sold to party

    Hi All,
    Can we have multiple payers for one sold to party?
    Thanks

    Hi
    Yes, you can have multiple PAYER for one Sold-to-party (only in the Customer master).
    This Partner relationship is maintained in two places. They are,
    > Customer master ( sales area data > partner function tab )
    > Sales documents (at Header level and Item level)
    In Customer master data, you can have multiple partners ( e.g, multiple Payers) for one Partner function( e.g, SH,BP,PY).
    But in Sales document, you can have only one Partner for one Partner function.
    So, you can have only in Customer master data multiple pertners. So, first create the different Payers through XD01 ,choosing Account group "Payer".
    Then assign all those PAYERS  in the master data of the Sold-to-party by going in the change mode XD02 and save it.
    When you create the Billing document, system will give a pop-up of those list of Payers and you have to choose one . You can have only one Payer in one Billing document.

  • Lightroom 5 slowdown, my post processing times have tripled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

    my post processing times have tripeled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

    my post processing times have tripeled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

  • How to set multiple senders for one account

    Hi all,
    I have a BIS account with my provider and a paid gmail account which collect for me mails from different address. Is it possible to set multiple senders for this account, thus it seems that I'm replying from one of these address and not only from my google address? In fact, it's important for me also that all mails come out from the same SMTP server (google).
    Thanks in advance.
    Best regards,
    Pierluigi

    For the BlackBerry to "send using" a specific email account, it must be set up on your BIS account as an email account, otherwise, you can send from that account.
    You can do that, and then block ALL incoming emails from those accounts, and allow only incoming mail from your one Gmail account, if you desire.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Multiple libraries for one ipod and match?

    Ok, so... I've got about 1500 songs purchased via itunes, and own about 3500 CDs, which I'm in the process of adding to my library.  All but about 50 of the discs were already ripped years ago, and I'm just copying the backup mp3s onto my new external drive after the last one failed.  Anyhow, I just got itunes Match and I'm wondering if I made a mistake in doing so.  Is there a way to have songs from multiple libraries on my ipod?  Due to the sheer volume of music (and other thigns) I own, I'm wondering if I should just make a comedy library, a blues library, a synthpop library, a metal one, a rock & roll one, an oldies one and so on.  If I do that, will I be relegated to having to decide what style of music I want on my ipod at any given time, or is there a way for me to load different items from multiple libraries onto the thing?
    I'm halfway tempted to just delete my entire library from itunes and just be SUPER picky about what tracks I add in order to be able to get under the 25K limit.  As is, right now I've got 21411 items in my library, over 20000 of which are in match, but it keeps crashing on step 3 right now.  As is, I already know I need to re-mp3 some of the discs since when I did them originally they were less than 96K (oddly, I'm finding it's mainly on my "oldies" discs like the American Graffiti soundtrack), and that doens't bug me, but the idea of having to go through song by song and add only what I want is one I'm not too fond of and that I'd like to avoid if at all possible.
    I'm really digging match, but not so much now that I realized there's a hard limit to the number of songs available.  I don't think Apple is used to folks like me who live & breathe music and attend well over 100 concerts in the average year.
    Thanks for anyone who's read all of my rambling, and any of y'all who can provide me a bit of guidance!
    -Ann

    This would be making is WAY less difficult. This is a MUCH needed feature in iTunes that they should add. As a DJ I absolutely hate having all my music in one library. Certain genres, like Electronic music, deserve to be in their own library. I would like to be able to hit the Music icon on my iPod and have it ask me what library of music I would like to access.
    This would allow siblings to share one iPod and not have to combine all of their music together. Or you could make a library of music with no explicicit music on it (and passcode it) so that you don't have to worry about kids having access to your explicit material if you let them use your iPod.
    You can already make multiple libraries in iTunes, why not just add the obvious next step and be able to add multiple libraries onto one iPod.

Maybe you are looking for