Multiple nk_bcm53115_sync_speeds_phy_to_mac() messages in RV-320 system log

Hi!
Any ideas/suggestions regarding why do I constantly get these messages in pairs in RV-320 system log?: 
2015-01-22, 11:52:02 Kernel kernel: nk_bcm53115_sync_speeds_phy_to_mac(): sport[5], speed[1], duplex[2]
2015-01-22, 11:52:02 Kernel kernel: nk_bcm53115_sync_speeds_phy_to_mac(): sport[5], speed[1], duplex[1]
Are they just informational or should I be worried about them?
Thanks very much,
Federico

What about opposite side of that link? How it is configured? is set to manual speed/duplex? or automatic? have you tried to change cable on that connection (can cause negotiation issues)?
if negotiated speed is set to 1000Gbps, have you tried to change it to 100Mbps if issue dissapeared (this can be again caused by wrong/long cable, noisy environment near cable)?
If opposite side is manageable, are you able to see similar messages related to speed/duplex changes in system log?

Similar Messages

  • Application messages are in the system log instead of the application log

    Hi SAP GURUS.
    The standard output is created from the outbound delivery .
    All the messages are hitting the system log instead of the application log .
    This is after the upgrade from 4.6c to ECC 6.0 .
    Please provide the details how to move the log to the application log since the output is the standard output (SAP provided output type ).

    verzunof wrote:
    Hello,
    My system.log is filled with these messages, they repeat every second.
    Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncReceive::waitForDMA - context not going inactive.
    Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncTransmit::waitForDMA - context not going inactive.
    Do these messages indicate a problem? If so what that could be problem and the solution?
    Can this contribute to the sleep/wakeup problem when iMac won't wakeup after being put to sleep manually and not sleeping according to Power Saving settings?
    Thanks a lot.
    verzunof wrote:
    I'm not certain if those messages indicate a power issue but you can try *resetting the System Management Controller* and see if that helps. Here's how: http://support.apple.com/kb/HT1806
    "The System Management Controller (SMC) is a chip on the logic board that controls all power functions for your computer. If your computer is experiencing any power issue, resetting the SMC may resolve it. The SMC controls several functions, including:
    Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
    Handling system resets from various commands.
    Controlling the fans."
    Carolyn

  • I am getting a warning need more space on my disk. I have checked the Console and there have been 4000 thousand messages in my system log in the last 2 days. I have emptied as many files as possible.

    Hi
    I am getting a warning on opening my mac saying I need more space as my setup disk is full.  I have emptied many files as well as my Trash.  I am planning to get an external drive for my photos, but it has been suggested that I check Console and under the system log the following message (of which they say 4000 messages have been logged in 2 days) '06/06/2014 16:08:23.341 com.apple.dynamic_pager: dynamic_pager: Need more space on the disk to enable swapping'.  This is a copy of one of the items.  It is from the system log.  I really do not think I have enough files to warrant this warning, with the exception of photos.  My storage shows 143 MB free out of 120.47. Thanks for any help.

    First off, no MacBook Air can run 10.3 or earlier.
    Secondly, are you sure you only have 143MB of storage free?  That's seriously low.  With MacBook Airs of 120 GB hard drives, or even 140 GB which is often the case when it says out of 120, you shouldn't allow your free space to go down below 20 GB.  MB is 1024 fold less than a GB.  So if you really have 143MB free on a MacBook Air, you are long past the minimum space you should be keeping it at, and need to start clearing a lot of space now*:
    http://www.macmaps.com/diskfull.html
    I'm asking this thread be moved to the MacBook Air forum,a as we can't say for certain what you have when you post in the 10.3 or earlier forum.

  • ICal doesn't show delegation, and generates date and time error messages in /var/log/system.log

    I have a problem with my iCal, when I use my caldav account, I can only see my own calendar on my MBA, on my co-workers MBP it works fine with both my account and his. My co-worker can't see other calendars than his own when he uses iCal on my laptop.
    We can reproduce this problem on his computer by setting Location to Automatic rather than Amsterdam, then after deleting iCal's cache files, the caldav account and setting the Location back to Amsterdam solves the problem for him.
    It does not solve the problem for me (or several other co-workers). We've been looking at this for a few weeks, and we can not find any clear pattern why certain machines have this problem and others don't.
    All machines (both affected and unaffected) are running Mac OS 10.7.2 with iCal 5.0.1
    I've spoken to Apple support over the phone (in the Netherlands), unfortunately, they couldn't help with this.
    So far we've tried numerous location and language settings, but on affected machines nothing appears to solve the delegation problem (which we assume to be connected to the error messages iCal generates)
    Starting iCal yeilds the following error messages in /var/log/system.log:
    Jan  5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
    Jan  5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=3
              line 1,6: unexpected char: '='
    Jan  5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
    Jan  5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=10
              line 1,6: unexpected char: '='
    Jan  5 11:31:05 dhcp-91 iCal[23884]: Unexpected EOF, returning last token as fallback
    Jan  5 11:31:05 dhcp-91 iCal[23884]: VTIMEZONE does not match System Time Zone (Europe/Amsterdam) for 20100105T000000 to 20120105T000000: (
                  "interval: 2001-01-01 01:00:00 +0100, offset: 3600"
              ) != (
                  "interval: 2010-03-28 03:00:00 +0200, offset: 7200",
                  "interval: 2010-10-31 02:00:00 +0100, offset: 3600",
                  "interval: 2011-03-27 03:00:00 +0200, offset: 7200",
                  "interval: 2011-10-30 02:00:00 +0100, offset: 3600"
              BEGIN:VTIMEZONE
              X-LIC-LOCATION:Europe/Amsterdam
              TZID:Europe/Amsterdam
              BEGIN:DAYLIGHT
              TZOFFSETFROM:+0100
              TZNAME:CEST
              TZOFFSETTO:+0200
              DTSTART:19700329T020000
              END:DAYLIGHT
              BEGIN:STANDARD
              TZOFFSETFROM:+0200
              TZNAME:CET
              TZOFFSETTO:+0100
              DTSTART:19701025T030000
              END:STANDARD
              END:VTIMEZONE
    Jan  5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
    Jan  5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=3
              line 1,6: unexpected char: '='
    Jan  5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
    Jan  5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=10
              line 1,6: unexpected char: '='
    Jan  5 11:31:05 dhcp-91 iCal[23884]: Unexpected EOF, returning last token as fallback
    Jan  5 11:31:05 dhcp-91 iCal[23884]: VTIMEZONE does not match System Time Zone (Europe/Amsterdam) for 20100105T000000 to 20120105T000000: (
                  "interval: 2001-01-01 01:00:00 +0100, offset: 3600"
              ) != (
                  "interval: 2010-03-28 03:00:00 +0200, offset: 7200",
                  "interval: 2010-10-31 02:00:00 +0100, offset: 3600",
                  "interval: 2011-03-27 03:00:00 +0200, offset: 7200",
        "interval: 2011-10-30 02:00:00 +0100, offset: 3600"
              BEGIN:VTIMEZONE
              X-LIC-LOCATION:Europe/Amsterdam
              TZID:Europe/Amsterdam
              BEGIN:DAYLIGHT
              TZOFFSETFROM:+0100
              TZNAME:CEST
              TZOFFSETTO:+0200
              DTSTART:19700329T020000
              END:DAYLIGHT
              BEGIN:STANDARD
              TZOFFSETFROM:+0200
              TZNAME:CET
              TZOFFSETTO:+0100
              DTSTART:19701025T030000
              END:STANDARD
              END:VTIMEZONE
    And when I close iCal I get:
    Jan  5 11:33:25 dhcp-91 [0x0-0x592592].com.apple.iCal[23894]: token mismatch: 4 != 5

    I'm seeing the same thing, and I can't even find where OS X stores calendars on disk anymore...

  • Error Message in System log

    Hi, I recently discovered this error message in my system.log
    /Applications/Safari.app/Contents/MacOS/Safari: CGContextClipToRect: invalid context
    I am using Safari version 2.0.4 on Tiger. Can anyone tell me what it means and if I need to worry about it. Thanks!

    Hi,
    It's just a debugging entry the programmers have left in the Safari/WebKit code. It looks like the webpage you are viewing is causing one of the rendering functions used to draw parts of the page to behave in an unexpected way.
    Nothing to worry about as such.

  • Warning messages in system log after upgrading to SP4

    Hello there, I am starting to see quite a lot of warning messages in the system log saying the following:
    Failed loading JDBC Driver class com.microsoft.jdbc.sqlserver.SQLServerDriver - Exception:java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver
    Failed loading JDBC Driver class com.sap.dbtech.jdbc.DriverSapDB - Exception:java.lang.ClassNotFoundException: com.sap.dbtech.jdbc.DriverSapDB
    Failed loading JDBC Driver class org.gjt.mm.mysql.Driver - Exception:java.lang.ClassNotFoundException: org.gjt.mm.mysql.Driver
    We are using MSSQL as the underlying database, so maybe something needs to be unchecked somewhere? Any ideas?
    Best regards,
    Anders

    Anders,
        I just updated to SP4 and tried a user creation (my database is also MSSQL). I did not see any warnings in the system logs. Like Thomas said you must have extra entries in the Tools/Option/Java/JDBC driver names.
    All you need is just one entry "com.microsoft.sqlserver.jdbc.SQLServerDriver".
    Hope this helps.
    Thanks
    Shabna

  • ICal writing tons of log messages into system.log

    Hi all,
    I've got an issue with iCal under Leopard 10.5.1.
    Sometimes my syslogd process grabs ~100% CPU time and so I took a look into system.log.
    I saw MANY lines like this:
    Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.363 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p774
    Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.364 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p2754
    Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.364 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p288
    Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.365 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p2056
    Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.366 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p148
    Jan 27 19:23:34 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:34.367 iCalExternalSync[4230:10b] ISyncSession deleteRecordWithIdentifier: ignoring delete for unknown record Event/p73
    Jan 27 19:23:42 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:42.497 iCalExternalSync[4230:10b] SyncServices precondition failure in [ISyncConcreteSession clientAcceptedChangesForRecordWithIdentifier:formattedRecord:newRecordIdentifie r:]: you can't change the record identifier from 4183D93C-A813-4AB4-BA0F-C246414B2DA1 to node_BirthdayCalendar/p7: it is already associated with a different record.
    Jan 27 19:23:42 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:42.521 iCalExternalSync[4230:10b] [ICalExternalSync ]Encountered [ISyncConcreteSession clientAcceptedChangesForRecordWithIdentifier:formattedRecord:newRecordIdentifie r:]: you can't change the record identifier from 4183D93C-A813-4AB4-BA0F-C246414B2DA1 to node_BirthdayCalendar/p7: it is already associated with a different record.
    Jan 27 19:23:42 Tigger com.apple.syncservices.SyncServer[4225]: 2008-01-27 19:23:42.526 iCalExternalSync[4230:10b] [ICalExternalSync ]NSException name:NSInvalidArgumentException reason:[ISyncConcreteSession clientAcceptedChangesForRecordWithIdentifier:formattedRecord:newRecordIdentifie r:]: you can't change the record identifier from 4183D93C-A813-4AB4-BA0F-C246414B2DA1 to node_BirthdayCalendar/p7: it is already associated with a different record.
    Any idea how to fix this?
    Here's another problem that might be related to this: my "Private" calendar was published in 10.4 but now the webdav server that was used for this is no longer existent (and can't be setup again).
    So I wanted to unpublish my Private calendar but this wasn't possible. When trying to unpublish it I get the error message "This calendar could not be unpublished. Authentication information may be incorrect."
    If I select the "Cange location..." menu entry in the context menu of the Private calendar I still see the webdav server address and the Login and Password fields are filled. But because this server no longer exists publishing is no longer possible. Which is fine with me.
    So, how can I get rid of the publishing? Because I get tons of error messages in system.log, too, for this behaviour. Everytime the system tries to publish this calendar...
    Thanks,
    Stefan.

    I am not much of a help, but I just wanted to say that my iCal just experienced the same problems for the first time today...

  • Lots of system log messages from nsurlstoraged, also systemstatsd

    I'm running Yosemite (10.10.2) on an old Mini (details below).  I am not having particular problems with slowness, crashes, etc., but I'm seeing repeated messages in the System Log which seem to be errors:
    nsurlstoraged[300]: ERROR: shrinkDB - shrink of file system cache did not fully complete.  Result: 11
    systemstatsd[1286]: assertion failed: 14C1514: systemstatsd + 3283 [A886B71F-3A31-3324-9B30-5143FDF4ECCB]: 0xb
    For at least the past 2 days, the systemstatsd messages have the exact same values.  When the computer is in active use, I get 2 of them every 3 to 4 minutes.
    The nsurlstoraged messages are a little more frequent but don't have such a clear pattern.  Some other messages from that source which are interspersed with the above message include the following:
    nsurlstoraged[1263]: realpath() returned NULL for /var/root/Library/Caches/ocspd
    nsurlstoraged[1263]: The read-connection to the DB=/var/root/Library/Caches/ocspd/Cache.db is NOT valid.  Unable to determine schema version.
    nsurlstoraged[1263]: ERROR: unable to determine file-system usage for FS-backed cache at /var/root/Library/Caches/ocspd/fsCachedData. Errno=13
    Should I be concerned about resolving these, or can I just ignore them?  I did run the string of commands provided in the forum by Linc which are intended to reset the privileges on everything in my home directory to the default values, and I also ran the password reset process via the recovery partition to reset the ACLs.
    Just a few quick notes about my system:
    - the volume My Mac system (external) is not the system or boot disk.  It has most of my image files (including iPhoto libraries) plus the iTunes Media folder.  I did not run any commands there to reset file/directory permissions.
    - the volume Macintosh HD is the system disk and contains my home directory.
    - I am planning to upgrade from to 4 GB to 8 GB RAM.
    Thanks very much for any insight into these messages!
    Dave
    EtreCheck version: 2.1.8 (121)
    Report generated April 7, 2015 at 9:11:16 PM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        Mac mini (Early 2009) (Technical Specifications)
        Mac mini - model: Macmini3,1
        1 2.26 GHz Intel Core 2 Duo CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce 9400 - VRAM: 256 MB
            Acer P191W 1440 x 900 @ 60 Hz
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: one day 22:49:30
    Disk Information: ℹ️
        Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            disk0s2 (disk0s2) <not mounted> : 249.20 GB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        OPTIARC DVD RW AD-5670S
    USB Information: ℹ️
        Generic Mass Storage Device
        Logitech Trackball
        Newer Tech miniStack Classic 2 TB
            disk2s1 (disk2s1) <not mounted> : 210 MB
            disk2s2 (disk2s2) <not mounted> : 249.25 GB
            My Mac Time Machine (disk2s3) /Volumes/My Mac Time Machine : 1.50 TB (831.73 GB free)
        Canon iP4300
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Firewire Information: ℹ️
        OWC Mercury Elite Pro Quad USB 3 800mbit - 800mbit max
            EFI (disk1s1) <not mounted> : 210 MB
            Macintosh HD (disk1s2) / : 319.21 GB (96.14 GB free)
            Recovery HD (disk1s3) <not mounted>  [Recovery]: 650 MB
            My Mac system (external) (disk1s4) /Volumes/My Mac system (external) : 499.46 GB (174.98 GB free)
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/TechTool Pro 7.app
        [not loaded]    com.micromat.driver.spdKernel (1 - SDK 10.8) [Click for support]
        [not loaded]    com.micromat.driver.spdKernel-10-8 (1 - SDK 10.8) [Click for support]
            /Library/StartupItems/BRESINKx86Monitoring
        [not loaded]    com.bresink.driver.BRESINKx86Monitoring (9.0) [Click for support]
            /System/Library/Extensions
        [loaded]    com.microsoft.driver.MicrosoftKeyboard (8.2) [Click for support]
            /System/Library/Extensions/MicrosoftKeyboard.kext/Contents/PlugIns
        [loaded]    com.microsoft.driver.MicrosoftKeyboardBluetooth (8.2) [Click for support]
        [not loaded]    com.microsoft.driver.MicrosoftKeyboardUSB (8.2) [Click for support]
            /Users/[redacted]/Downloads/LCC Installer.app
        [not loaded]    com.Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0) [Click for support]
    Startup Items: ℹ️
        Executor: Path: /Library/StartupItems/Executor
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.cmfsyncagent.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.EscrowSecurityAlert.plist
        [killed]    com.apple.sbd.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        [killed]    com.apple.xpc.loginitemregisterd.plist
        9 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.xpc.smd.plist
        [killed]    org.cups.cupsd.plist
        6 processes killed due to memory pressure
    Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.micromat.TechToolProAgent.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.bombich.ccc.plist [Click for support]
        [running]    com.crashplan.engine.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [running]    com.micromat.TechToolProDaemon.plist [Click for support]
        [failed]    com.nalpeiron.netpro.plist [Click for support]
        [loaded]    com.prosofteng.DriveGenius.locum.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
    User Launch Agents: ℹ️
        [failed]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.amazon.cloud-player.plist [Click for support]
        [running]    com.amazon.music.plist [Click for support]
        [failed]    [email protected]
        [failed]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support] [Click for details]
        [failed]    com.google.GoogleContactSyncAgent.plist [Click for support]
        [failed]    com.plexapp.helper.plist [Click for support]
        [failed]    com.yahoo.YahooContactSyncAgent.plist [Click for support]
        [loaded]    net.jonstovell.keepMinasTirithdata(external)Spinning.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        MiniUsage    Application  (/Applications/MiniUsage.app)
        Alfred    Application  (/Applications/Alfred.app)
        OpenDNS Updater    Application Hidden (/Applications/OpenDNS Updater.app)
        CrashPlan menu bar    Application  (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)
        OneDrive    Application  (/Applications/OneDrive.app)
    Internet Plug-ins: ℹ️
        Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        EPPEX Plugin: Version: 4.1.0.0 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
        Picasa: Version: 1.0 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        feedly
        Add to Google Reader
        FlickrPlus
        Ultimate Status Bar
        Exposer
        Evernote Web Clipper
        InvisibleHand
        Turn Off the Lights
        The New York Times
        Procrastinate
        Better Facebook
        Save to Pocket
        Print Plus
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Microsoft Keyboard  [Click for support]
        TechTool Protection  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            My Mac system (external): Disk size: 499.46 GB Disk used: 324.48 GB
            Macintosh HD: Disk size: 319.21 GB Disk used: 223.07 GB
        Destinations:
            My Mac Time Machine [Local]
            Total size: 1.50 TB
            Total number of backups: 59
            Oldest backup: 2013-12-04 08:43:17 +0000
            Last backup: 2015-04-05 15:12:17 +0000
            Size of backup disk: Too small
                Backup size 1.50 TB < (Disk used 547.55 GB X 3)
    Top Processes by CPU: ℹ️
             4%    top
             2%    WindowServer
             2%    systemstatsd
             1%    Safari
             0%    MiniUsage
    Top Processes by Memory: ℹ️
        266 MB    CrashPlanService
        112 MB    Mail
        86 MB    Finder
        82 MB    Console
        69 MB    Safari
    Virtual Memory Information: ℹ️
        106 MB    Free RAM
        983 MB    Active RAM
        895 MB    Inactive RAM
        870 MB    Wired RAM
        17.28 GB    Page-ins
        506 MB    Page-outs
    Diagnostics Information: ℹ️
        Apr 6, 2015, 08:15:21 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.MailServiceAgent_201 5-04-06-201521_[redacted].crash
        Apr 5, 2015, 10:35:53 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/QuickLookSatellite_2015-04-05- 223553_[redacted].crash
        Apr 5, 2015, 10:35:52 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/QuickLookSatellite_2015-04-05- 223552_[redacted].crash
        Apr 5, 2015, 10:16:51 PM    Self test - passed
        Apr 5, 2015, 03:58:09 PM    /Library/Logs/DiagnosticReports/CrashPlanService_2015-04-05-155809_[redacted].c pu_resource.diag [Click for details]

    I switched over to an early 2008 20-inch iMac (booting from same external disk) and the "ERROR:shrink DB" and "assertion failed" messages are continuing, so I doubt that it is related to the hardware unless it's the external drive itself or the Firewire cable.
    Any help would be appreciated...

  • How to write messages into system log(sm21) using c_write_syslog_entry

    Hi,
    May i know how to write my application messages into system log(sm21)
    using "c_write_syslog_entry". Any explanation regarding the Type. ID, Data
    will be useful with examples. Incase of any other FM's or C functions does
    the same Please let me know.
    Thanks
    Prasath

    Hello Prasanth
    I agree with Kareem that you should prefer the application log. If interface IF_RECA_MESSAGE_LIST is available on your SAP system this is the first choice for collecting messages AND storing them as application log.
    For an example you may have a look at my Wiki posting [Message Handling - Finding the Needle in the Haystack|https://wiki.sdn.sap.com/wiki/display/profile/2007/07/09/MessageHandling-FindingtheNeedleintheHaystack]
    Not shown in this example is the storage of the application log. However, if you look at method CF_RECA_MESSAGE_LIST=>CREATE you see that you can add the application log references here.
    Regards
      Uwe

  • Empty messages in system.log repeated in a large number

    I am getting on my terminal the following message:
    Broadcast Message from [email protected]
                       (no tty) at 19:07 PDT..."
    Apr 18 19:07:25 Andreis-MacBook-Pro-L kernel[0]:                              
    Looking around on Internet I leaned that I should examine /var/log/system.log
    I find that I have empty messages repaeted an amazing number of times:
    Apr 18 19:27:17 Andreis-MacBook-Pro-L kernel[0]:
    Apr 18 19:27:17: --- last message repeated 801 times ---
    Apr 18 19:27:17 Andreis-MacBook-Pro-L usbmuxd[21137]: _AMDeviceConnectByAddressAndPort (thread 0x100704000): IPv4
    Apr 18 19:27:17 Andreis-MacBook-Pro-L kernel[0]:
    Apr 18 19:27:18: --- last message repeated 1001 times ---
    Apr 18 19:27:18 Andreis-MacBook-Pro-L Xcode[22615]: _AMDDeviceAttachedCallbackv3 (thread 0x116301000): Device 'AMDevice 0x408121ea0 {UDID = b8b2c1d0f684f0c8189faf6a560f38bd9a8232a8, device ID = 17, FullServiceName = f0:cb:a1:08:7d:5c@fe80::f2cb:a1ff:fe08:7d5c._apple-mobdev._tcp.local.}' attached.
    Apr 18 19:27:18 Andreis-MacBook-Pro-L Xcode[22615]: _AMDDeviceAttachedCallbackv3 (thread 0x113a2a000): Device 'AMDevice 0x40253d940 {UDID = b8b2c1d0f684f0c8189faf6a560f38bd9a8232a8, device ID = 17, FullServiceName = f0:cb:a1:08:7d:5c@fe80::f2cb:a1ff:fe08:7d5c._apple-mobdev._tcp.local.}' attached.
    Apr 18 19:27:18 Andreis-MacBook-Pro-L kernel[0]:
    Apr 18 19:27:48: --- last message repeated 70929 times ---
    Apr 18 19:27:47 Andreis-MacBook-Pro-L kernel[0]:
    Anybody has a clue why this may be?

    Apache is a webserver.
    Go to console
    type:
    sudo apachectl stop
    enter your password. you should not have that issue again

  • Z System Log Messages

    Hi  Experts
    What is the use of  <u><b>Z </b> </u> system log messages.
    How and where I can see them in the system .

    System log message : transaction : sm02

  • RADIUS messages in system.log, all day long

    My 10.6 server's system log is full of RADIUS messages, every few seconds, making me think that something isn't as it should be. We have an airport extreme base station as our router and RADIUS access point. I configured the airport base station from the server, thru server manager.
    Feb 3 17:50:32 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:51:54 192.168.2.1 ffasnyc 80211: Deauthenticating with station 00:19:e3:00:f7:89 (reserved 2).
    Feb 3 17:51:54 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Feb 3 17:51:54 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:51:54 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:53:16 192.168.2.1 ffasnyc 80211: Deauthenticating with station 00:19:e3:00:f7:89 (reserved 2).
    Feb 3 17:53:16 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Feb 3 17:53:16 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:53:16 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:54:38 192.168.2.1 ffasnyc 80211: Deauthenticating with station 00:19:e3:00:f7:89 (reserved 2).
    Feb 3 17:54:38 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Feb 3 17:54:38 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:54:38 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:56:00 192.168.2.1 ffasnyc 80211: Deauthenticating with station 00:19:e3:00:f7:89 (reserved 2).
    Feb 3 17:56:00 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Feb 3 17:56:21 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:56:21 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:57:43 192.168.2.1 ffasnyc 80211: Deauthenticating with station 00:19:e3:00:f7:89 (reserved 2).
    Feb 3 17:57:43 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Feb 3 17:57:43 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:57:43 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:58:53 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:59:04 192.168.2.1 ffasnyc 80211: Deauthenticating with station 00:19:e3:00:f7:89 (reserved 2).
    Feb 3 17:59:04 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Feb 3 17:59:04 192.168.2.1 ffasnyc 80211: Associated with station 00:19:e3:00:f7:89
    Feb 3 17:59:04 192.168.2.1 ffasnyc 80211: Authenticating station 00:19:e3:00:f7:89 to RADIUS.
    Feb 3 17:59:07 192.168.2.1 ffasnyc 80211: Disassociated with station 00:19:e3:00:f7:89
    Fe

    Also NOW I suddenly have two 256 cards that are not showing up so I have lost half of my RAM! I have less than 12% space left on my hard drive. Two of the cards look the same and two others look alike ( I have four 256 cards) Two years ago the repair shop put in two used cards so I would have all the same. I tried re seating them but it didn't work and I still get repeating messages in my systems log.

  • What is RV042 System Log Message: PROTO 112 on ixp1?

    Currently I am using a RV042 with firmware 1.3.13.02 as a basic router and not using any of the VPN features.
    In the system log the follow message occurs very frequently, on average 4 times per second:
    Event - Type: Connection Refused - Policy violation
    Message: PROTO 112 192.190.205.18->224.0.0.18 on ixp1
    Is  this something of concern, and if it is, how should I go about  resolving it? The WAN IP address of my router is in the 192.190.205.x  range.
    Thanks.

    Hi
    i think you have a device connected via your WAN  sending out VRRP framaes, and my router sees these as a policy violation.
    sounds pretty good to me.

  • AppleFWOHCI_Async messages in the system.log

    Hello,
    My system.log is filled with these messages, they repeat every second.
    Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncReceive::waitForDMA - context not going inactive.
    Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncTransmit::waitForDMA - context not going inactive.
    Do these messages indicate a problem? If so what that could be problem and the solution?
    Can this contribute to the sleep/wakeup problem when iMac won't wakeup after being put to sleep manually and not sleeping according to Power Saving settings?
    Thanks a lot.

    verzunof wrote:
    Hello,
    My system.log is filled with these messages, they repeat every second.
    Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncReceive::waitForDMA - context not going inactive.
    Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncTransmit::waitForDMA - context not going inactive.
    Do these messages indicate a problem? If so what that could be problem and the solution?
    Can this contribute to the sleep/wakeup problem when iMac won't wakeup after being put to sleep manually and not sleeping according to Power Saving settings?
    Thanks a lot.
    verzunof wrote:
    I'm not certain if those messages indicate a power issue but you can try *resetting the System Management Controller* and see if that helps. Here's how: http://support.apple.com/kb/HT1806
    "The System Management Controller (SMC) is a chip on the logic board that controls all power functions for your computer. If your computer is experiencing any power issue, resetting the SMC may resolve it. The SMC controls several functions, including:
    Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
    Handling system resets from various commands.
    Controlling the fans."
    Carolyn

  • System.log filling with error messages

    After SL update my system.log if filling with error messages.
    Does any process delete the system.log periodically?
    What's causing this error? Getting thousands of them.
    9/30/09 12:08:13 PM [0x0-0x12012].com.nowsoftware.nowxagent[181] at now.swing.NProgressBar.fixAppleAnimationBug(null:-1)

    JHF45 wrote:
    After SL update my system.log if filling with error messages.
    Does any process delete the system.log periodically?
    Yes. There are three automatic jobs that run daily, weekly, and monthly doing this sort of thing. They run in the early hours of the morning if your Mac is awake, or shortly after it wakes up if it was sleeping. In Leopard, if it was powered-off, they won't run; I don't know if it's the same in Snow.

Maybe you are looking for

  • F-32, clear customer - document number

    Hi, My client is using F-32 to clear customer items, it selects document no. as selction crieteria. it enters document number wrongly and press enters, system stores document no. user get back by pressing F3 once and select choose open items whr he a

  • Generate column value based on conditions

    BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE     11.2.0.3.0     Production TNS for HPUX: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Productionselect s

  • How Can I put A quicktime clip into keynote??

    Two Questions, One: How Can I put a "get a mac" commercial into keynote. (Like how do i download it and how do i put it in) Two: If I download a quick time clip (say, pirates of the Caribbean 2 commercial) How can I insert it into keynote?? Zach

  • Can the Delivery Date be left with no value in Purchasing Order?

    Hi SAP Experts, Good day!  I just want to ask if it is possible for the Delivery Date in the Purchase Order to be left with no value?  Whenever we remove the delivery date, it comes back when we save the PO.  Is there a way for it to be blank? Thanks

  • Unable to Renew Photoshop

    Hi.  I received a message to renew my subscription to Photoshop and when I try i keep getting the message that another Adobe app is in use and I must close it first.  I am lost.  I also purchased a new subscription and still receive the same message.