Multiple node selection in Hierarchy Variable

Hi Experts,
I have a requirement for the capability to select the multiple node in the BPS variable of type hierarchy. This is required in the data slice where my administrator want to select the more than one node at a time for the purpose of locking the transaction records of deferent departments with slice. I see only option to select one node in variable but I would like to know if there are any ways to enhance this variable to select the multiple node...some exit or some thing.
Any valid suggestions will be fully rewarded with points.
Thanks,
Raj.

Hi Jain
Thanks for your input. Following is exact requirement for me.
I have fund center hierarchy and each text node represents one department and all the fund centers under it. Plan administrator wants to lock each department when they are done with the planning. I can achieve this by preparing one data slice for each department and administrator can activate this when they want to lock department but this generates lot of data slices, which may impact the performance of the system a lot.
Other option I am thinking of is the possibility to use hierarchy variable in data slice to select the multiple departments that are required to be locked at any point in time, so that I can manage this with one variable.
Other option is selecting individual fund center values  in variables but that is completely ruled out for the given volume.
If I understand your suggestion right, you are suggesting to create the custom table to store different node values from the hierarchy and use the exit variable in data slice. IF you have any document/code to achieve this, please let me know.
let me know if you have any other simple way to achieve this.
Thanks,
Raj.
Message was edited by: Raj G

Similar Messages

  • JTree multiple nodes selection problem !

    I can not make my JTree to be in multiple node selection mode.
    I have custom tree model and tree node class, the tree model class
    implements javax.swing.tree.TreeModel, and the tree node is an ordinary
    Java object.
    In this setting, my JTree is always in single selection mode.
    I have tried set the selection model after the JTree has initialized, and
    it didn't work.
    What I missed in TreeModel implementation ? Or should my tree node class
    also implements javax.swing.tree.TreeNode ?
    Don't tell me just call
    xxtree.getSelectionModel().setSelectionMode(javax.swing.tree.TreeSelectionModel.DISCONTIGUOUS_TREE_SELECTION);
    It didn't work.

    Just in case anyone wants to know, I did find the magic number of files, and what the problem is. I talked with tech suppot at Adobe, and they know the problem exists, but won't fix it. I did put in a request in the "Request a Feature" form. Read on:
    The magic number is 40 Canon 1Ds Mark III Raw files, and clicking on three or more keywords. The key to not having the numbers of keywords counted incorrectly in the filter pane is to click on the keywords as fast as you can before it starts to write to the metadata. If you click on each keyword one at a time, and wait about a second or more between selecting the keywords, then the counts in the filter panel for the number of keywords is not correct in relation to the number of files that you have chosen to apply keywords to. The cure for this is to click as many keywords as possible as fast as you can before the software starts incorporating the keywords into the metadata.
    I would suggest to Adobe, that a nice feature would be that one could click on as many keywords as one would want, to as many files one would want, and then have a button or icon that would enable one to then apply all the keywords at once, instead of applying them as you click them as it is now. I also would love it if Adobe fixed it now instead of waiting to fix it in the version of CS5. Someone on Adobe's support line told me that Adobe would rather wait to put this into the CS5 version than fix it now. I don't think that is right, but heck, I am only one guy who depends on this software to provide images keyworded to my clients in a timely manner. I would never run my business like this Adobe. If there is a problem, and there is, please fix it now, or give me some of my money back since your product has a design flaw that is having a negative impact in my ability to to my job and run my business.
    Thanks!
    Daniel Root
    Portland, OR

  • Can "Create Internal Leaf" be done for multiple nodes of a hierarchy

    Dear all,
    Since MDM cannot associate main table record to non-leaf node in a hierarchical lookup table, I need to create internal leaf nodes for those non-leaf nodes. But the number of target non-leaf nodes is really huge. Is it possible to select all of them and create internal leaves all together?
    Thanks + Best Regards
    Jerome

    Hi
    I think if we can create hierachy by levels not thru parent-child way but split hierarchy creation, the the level 2 or level 3 (last level of any hierarchy)should become a leaf node.
    I tried that but it is creating 'Null' for leaf nodes. i.e. not stopping at level 2 or 3 while creating hierachy. If we can get a workaround to stop 'Null' creation , problem can be resolved. I am in sp4.
    I will be interested to know the resolution
    -reo

  • BW 3.5 works with multiple nodes for authorizations

    Hi,
    Does BW 3.5 allow to do authorizations on mutiple nodes? It seems that from the How to wotk with hierarchy authorizations paper, the variable can only allow filtering 1 node. for 2.0B. We have requirements to allow viweing multiple nodes in a hierarchy.
    Thanks
    Will

    Hi Will,
    creat a hierarchy-node variable fill by authorizations in the frontend. The type has to be multiple entries (not single value). In RSSM at the hierarchy authorization creation you have to use the F4 for selecting nodes. The F4 allows to drag more nodes into the right frame.
    Cheers
    Peter

  • Hierarchy variable in Webi report

    Dear all ,
    I'm expirence some problems in the Olap Universe , my question is :
    I can't see data in Webi report .
    Step 1 Create the webi report
    Step 2 Run the query
    Step 3 Select the Hierarchy variables in prompt parameter
    Step 4 Get the msg "No data to retreive "
    I can see the data in  BW with this Hierarchy variable so i don't understand what it's missing .
    Thanks a lot
    Bst Rgds
    Simon

    Dear Sanket ,
    Thanks for your response  , We are using the dimension it's a member of one hierarchy in the query panel without any filter .
    BOE release 3.1 Sp3
    BW 7.01 SP6 .
    Hope this helps , any further question please let me know .
    Bst Rgds
    Simon

  • Cannot enter value in selection screen for Hierarchy variable.

    Hi All,
    I have a hierarchy variable on the selection screen for Org unit.
    When i execute the report via Bex or RSRT i am able to enter the value directly into the selection screen input field without going for F4 help and then selecting the value.
    But when the same query is used in web template and executed the input field for the variable on the selection screen is greyed out and doesnt allow to type in the value. Only way to fill in the value is via F4 help.
    Can anyone tell why is this happening and is there any way this can be changed?
    Thanks in advance.
    -RJ

    Hi Prakash,
    I am not able to select or click on the input field of the selection screen before and after selecting the value
    CTRL+K doesnt work for me.
    The display field is populated only when i select a node from the F4 help screen.
    When executed from RSRT the field is highlighted and i am able to enter the value unlike when executed on web browser.
    The variable is Mandatory multiple single value readu for input.
    I found an article saying that for hierarchy node variables the values are forced by F4 value help as the values that are entered manually might not be unique.
    This is the link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/15839190-0201-0010-adb1-d2edd9857b0a
    I would like to know if there is a work around or setting that can be made to make it work?
    -RJ

  • Multiple entries in hierarchy variable

    hi,
      The user requirement is like this.
      He is executing a report which has one standard hierarchy variable & another standard node variable and he is clicking on F4 on first hierachy variable and selecting one hierarchy , let us say the hierarchy is like this:
      AAAA
       BBBBBB
       CCCCCC
        DDDDDDD
       XXXXXX
       YYYYYY
        LLLLLLL
         IIIIIIII
        TTTTTTT
    Let us say he selected the hierarchy AAAA and he selected DDDDDDD in node variable.But what is his question is can he select multiple nodes in the variable like can he select DDDDDDD and LLLLLLL nodes and get the results for these two nodes or not.
    I don't know whether this is possible or not.
    Please advise.
    Thanks .

    hi,
      As i stated earlier , it is a sap standard variable.So it is not allowing me to change variable settings from single value to selection option or any thing.If you want to know the properties of it.I can tell you that:
    1)In the Details, Variable represents Single value and variable entry is optional but optional can be changed but single value is greyed out.
    I hope you understood all the details.
    Any ideas???
    Thanks in advance.

  • HIerarchy Variable in Selection Screen not taken into account.

    Hi,
    Our users choose a cost center hierarchy in the selection screen and run the report. As we have suppressed Unassigned Nodes, they do not appear. However when users then deactivate the hierarchy, unassigned nodes are shown. Their argument is that the unassigned nodes should still not be displayed because a hierarchy was entered on the selection screen. Is there a way of stopping this?
    Thanks

    Hi Shawn,
    I think I get what you did in your query, though it took me some time...
    Did you select the cost center in your query and set the display hierarchy using settings, hierarchy tab, select hierarchy, hierarchy variable (or something like that)? That would explain why the query isn't filtered on that hierarchy, only the display of cost elements is affected. You should also have the same hierarchy variable in your filter settings in the query designer. That way, the user filters on a hierarchy and the unassigned nodes will never be in the result.
    Hope it helps, tell me if I got it wrong,
    Kind regards,
    Alex

  • Select key date of time-dependent hierarchy before select a hierarchy node

    Hello experts!
    I have a Web Application which has a selection on 0ORGUNIT (organizational unit). The selection is on hierarchy nodes and the hierarchy is time-dependent.
    Because of the time-dependency I have to give a key date for the hierarchy. But I want to select the key date at runtime/execution of the query and additionally I want to select the hierarchy node and other selection criterias.
    Maybe there is a solution to get all this in one pop-up or maybe in two or another solution how I can implement this requirement.
    Thanks for help!
    Peter

    Hey!
    You don't have to use the same presentation-hierarchy like  the selection-hierarchy is which you use for the variable. While presentation-hierarchy always has a key-date, the selection-hierarchy has none. So you see all values for selection but just this which are valid for the presentation-hierarchy are selected. And there is a warning which you can supress over RSRT.
    This solution works for our problem, maybe not for yours, don't know.
    Best regards,
    Peter

  • How to edit the properties for existing variables in BEX query, so that I can get multiple input selections

    Dear fellow developers,
    I'm trying to edit an existing variable using BEX query, so that it can allow multiple input selections.
    As you can see in the screenshot attached, the option is selectable during creation.
    However, during editing of an existing field, this field (Details -> Basic Settings -> Variable Represents) is not selectable.
    Does anyone knows why, and how to remedy this?

    Yes you can do it at the table level.
    Go to SE11 enter table name as RSZGLOBV.
    Enter the technical name of variable in VNAM field..You need to change the value in VPARSEL column.
    Please make sure to get the where used list of this variable so that you can know the impact,if something goes wrong.
    Also change it in DEV and then transport across the landscape.
    PS:Same thing has been described in this blog as well
    Changing BI variable parameters
    Regards,
    AL
    Message was edited by: Anshu Lilhori

  • Selection screen issue with hierarchy variable, due to compounding

    Hello people,
    I'm having this odd effect with a Hierarchy variable in the selection screen of a query,  the IObject is 0PROFIT_CTR.
    When I display the hierarchy values and pick up one of them, it returns ok to the sel.screen in this format: CO_AREA + "/" + ProfitCtr Value, example: "CANI/AR03".  (CO_AREA is compounding of 0PROFIT_CTR).
    Now,  if I hit the "check" button in the selection screen, the system converts the value to an different one, by repeating twice the compounding (CO Area) value, therefore creating an incorrect value like this: "CANI/CANIAR03". Note the string after the "/" is supposed to have only the profit center value, however now has also CO Area value (repeated).
    This value goes effectively to the query execution, but because this value does not exist, I get a message "SID value not found" and the effect is that the query does not get filtered by the value I picked up.
    Note, the same happens if I go directly to the query execution without hitting the check button, as it seems internally the system its doing the same conversion before sending the value to the query.
    I can't figure out if this is a problem of the variable, the hierarchy or the selection screen mechanism.... but I cannot find an explanation/solution.
    I trust someone has already facing this!!
    cheers and happy August to everyone.
    Fernando

    Sorry, but actually its the parent that needs tagging with "Never Share", not the level 0 member, so Alt_Entity1 and Alt_Entity2 etc, see Essbase DBA guide
    understanding Implied
    Sharing
    The shared member property defines a shared data relationship explicitly. Some
    members are shared even if you do not explicitly set them as shared. These
    members are said to be implied shared members.
    If you do not want a member to be shared implicitly, mark the parent as Never Share so
    that the data is duplicated, and is not shared. See Understanding Shared Members for an
    explanation of how shared members work.
    So in the example above
    Entity Dimension:
    E1 (user has access)
    E2
    E3(user has access)
    E4
    Alt_Entity
    Alt_Entity1 - Set to "Never Share"E1 (sharedmember)
    Alt_Entity2E2 (sharedmember)
    Alt_Entity3 - Set to "Never Share"E3 (sharedmember)
    Alt_Entity4E4 (sharedmember
    Thanks
    Anthony

  • Select the multiple nodes in a tree

    Hi Experts,
    We need to select the multiple nodes in a tree.Whatever we are selecting,that has to be added in the table as a tree structure itself.
    For ex:
    A
    |--A1
        |--B1
    If We select the A then A,A1 and B1 has to be added in a table.Please help me out for this.
    Regards
    Nutan
    Edited by: Armin Reichert on Jan 29, 2008 2:33 PM

    Hi,
    You have to create a recursive node and use the tree by nesting UI component
    Following tutorial will be of use
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/webdynpro/wd%20java/wdjava%20tutorials%20and%20articles%20archive/constructing%20a%20recursive%20and%20loadable%20web%20dynpro%20tree.pdf
    Recursive Node
    http://help.sap.com/saphelp_nw70/helpdata/en/5d/97384162316532e10000000a1550b0/frameset.htm
    TreeByNesting
    http://help.sap.com/saphelp_nw70/helpdata/en/92/12a74046033913e10000000a155106/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#31 [original link is broken]
    Regards
    Ayyapparaj

  • Random Selection Failure - to-spec at line is evaluated to multiple nodes

    Hi,
    Has anybody come across a situation were an assign activity fails with an
    "Exception is thrown because the to-spec at line 113 is evaluated to multiple nodes"
    The problem is that an element in a variable appears more than once although it is restricted to maxOccurs="1".
    e.g
    <variable>
    <outputVariable>
    <part name="payload" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Output xmlns="http://xmlns.oracle.com/MyApp/MySchema">
    <result/>
    <result/>
    </Output>
    </part>
    </outputVariable>
    </variable>
    The result element has a maxOccurs="1" in the xsd and the operation in the assign activity is a copy not an append!
    The problem is not consistent and happens randomly with the same set of data.

    Hi I understand the workaround here (adding [1] to the to-spec expression) - but what about the extra empty nodes, when we move to the next step in our process will those empty nodes still exist - since our XSD sets that node to maxOcurrs="1" this would cause issues down stream if these empty nodes are carried forward - we are thinking of putting in a XSLT to remove them, but wanted to see if anyone has input on if they will be carried forward - since this is a random issue ware not able to reproduce it in our dev/test environment, it seems to only happen in our Production environment.

  • Selecting all hierarchy nodes in the report

    Hi Friends,
    In my report I have a Hierarchy 0ORGUNIT,  there are a few sub nodes under this hierarchy.
    When the user runs the report if they want to see all the  nodes under a top node, they have to  expand each node till the last node and select them one by one.
    My question is,  is it possible to select all the sub nodes under a node just by selecting the top node?.
    If yes can someone please let me know how to do this?.
    I did check the sdn, but could get anything.
    Thanks in adv.
    Regards
    BN

    Hi,
    You can do that for the initial display i.e. the very first time you execute the query but once you collapse all the nodes you will not be able to expand all the nodes with one click.
    For showing different levels in the first display go to the characteristic properties on which you have hierarchy maintained, in the hierarchy properties section set the option 'Expand to Level' and hierarchy will be expaned for all the nodes till the level you select.
    Regards,
    Durgesh.

  • Get Node Key Multiple Items Selected  from ALV tree

    Hello Experts,
    I'm having a problem in getting Node keys for the items displayed as ALV tree.
    I'm able to get Node key, when only ONE record (Item) is selected.
    But, when I select multiple items under a Single node am not able to read(get) the node keys for all the selected items.
    I'm using the classCL_GUI_ALV_TREE.
    I have tried using the method GET_CHECKED_ITEMS, but not getting the keys.
    method GET_SELECTED_ITEM is giving node for a single item. I need it for multiple items selected.
    Thank you for your time.
    -SANGAR

    Hi,
    You need to use checkbox concept. and use method GET_CHECKED_ITEMS get selected items
    please check this tread.
    CL_GUI_ALV_TREE and Checkboxes
    aRs

Maybe you are looking for