Multiple nohup commands from same path

I had a doubt which is very urgent as my live migration is going on. I had run the 2 import commands from $ORACLE_HOME/bin for importing 2 schemas like:-
nohup imp JISPBILCORBILLINGPRD501/JISPBILCORBILLINGPRD501 fromuser=JISPBILCORBILLINGPRD501 touser=JISPBILCORBILLINGPRD501 file=JISPBILCORBILLINGPRD501.dmp log=JISPBILCORBILLINGPRD501.log commit=y feedback=10000 ignore=Y &
nohup imp JISPRATCORBILLINGPRD501/JISPRATCORBILLINGPRD501 fromuser=JISPRATCORBILLINGPRD501 touser=JISPRATCORBILLINGPRD501 file=JISPRATCORBILLINGPRD501.dmp log=JISPRATCORBILLINGPRD501.log commit=y feedback=10000 ignore=Y &
Normally I run one import from the path of $ORACLE_BASE and one from $ORACLE_HOME/bin so that I have 2 different nohup.out files to see the output. But, in this case, as the 2 imports are run from the same path, will the nohup.out have output from both the files?
So, my doubt is that hope there is no problem in running the nohup command from the same path and the nohup.out is populated with the output of both the
imports.
I hope, my question is clear.
Please, help in solving the doubt.
regards

I had a doubt which is very urgent See how to configure application server 10g for forms 10g about urgency....
That said...
will the nohup.out have output from both the files?Yes, and outputs will be mixed.... but you have separate logs, haven't you ?

Similar Messages

How to call multiple stored procedure from same DB Adapter

Hi,
I want to invoke 3 stored procedures from my message flow in BUS . I created a DB adapter and invoked 1 successfully . Now I don't to configure 2 other DB adapters for calling other 2 stored procedures . I want some how to be able to call the other 2 from the first DB adapter only . Somehow I need the flexibility to have procedure names as the operation names in 1 wsdl and be able to configure this in JDeveloper for this at time of DB adapter configuration . I am using 11G . Is it possible ?

You can probably create a DB adapter with operation type selected as Execute Pure SQL and write SQL code to invoke the stored procedures depending on the procedure name (which you can get as one of the parameters of DB Adapter).
However, Even if you were able to do it, the DB Adapter schemas are generated based on stored procedure parameter list and types. If you use Execute Pure SQL type of DB Adapter the schema will be generated based on the parameters which you are using in your custom SQL code within DB Adapter. Which means that if you want to add a new stored procedure as target which has a different name and different parameters then you will need to regenerate the DB adapter and update your custom SQL code. This also means that you will need to do regression testing interfaces to all stored procedures whenever there is any change in this DBAdapter.
Now, my question is why do you want to invoke multiple stored procedures from same DB adapter?
This is not a good way to design integration solutions and makes your services resistance to change as it will take more time to change and test.
If all that you want is to have a web service which can have different operations for different stored procedures then you should create three business services and create a wrapper proxy service which has one operation for each stored procedure, within the proxy transform and call the correct backend service (you can use operational branch). This way you have a modular code where each module (read interface to one stored procedure) can be independently modified and tested.

How to install oracle multiple homes in the same path

Hi,
In my environment i have multiple oracle home.
for ex:
/u01/oracle/product/10.2.0.3/
/u01/oracle/product/10.2.0.4/
/u01/oracle/product/11.2.0.1/
The above are the oracle default home paths
now i want to install 11.2.0.2 in the same path with different folder under the same name version
may i know what are the pre-request parameter that i need to check in solaris 64 bit
And i want to install oracle software alone
while installing oracle software alone how about the file /var/opt/oracle/oratab and oracle oraInventory files
whether it replace the old version oracle file. Please clarify
Thanks in advance.

Hello,
By default, the Oracle Inventory directory is not installed under the Oracle Base directory.
This is because all Oracle software installations share a common Oracle Inventory,
...The Oracle Inventory should be shared by all Oracle installations on the Server. So its location is unique.
However, you may have several Oracle Base directories.
Oracle Base is the root directory of the Oracle installation and may change from one major release to another one. However, the same Oracle Base may be used for several installations:
http://download.oracle.com/docs/cd/E11882_01/install.112/e17163/glossary.htm#g998168
Also, by default OUI suggest you the Oracle Base directory. In general you have something like "/u01/app/oracle". But you are free to set the Oracle Base directory you prefer.
Hope this help.
Best regards,
Jean-Valentin

Load Multiple Tables (schemas) from same XML file

Hi,
This is first time i am working XML files.
I have one XML file with two tables (schema). I need to load those two tables into two different Target tables.
This is the startegy to choose tables.
<Entry type="full"> --Table 1
<Entry type="short">--Table 2
I am try to find the tables like this using condition split (Type == "Full" ) but tables are not splitting as expected, is am i going with wrong approach??
Can anyone suggest me to process multiples tables from same XML file??

Hi Naveen,
After the issue in my environment, the package works well that the data in the XML file load to two destination tables based on one column values. The screenshot is for your reference:
To troubleshoot this issue, could you please check the values in the type column? Verify the values have exactly the same characters, case sensitivity. It seems that you haven’t write correct values in the Conditional Split Transformation. They should be like
below:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Multiple message threads from same person

I have multiple message threads from the same person in messages on my iPhone and iPad. One comes from their phone number and one from their email. Here are all the details, I would love to be able to combine them into one thread.
This other person and myself each have a new MacBook Pro, iPad Air 2, I have an iPhone 6 and they have an iPhone 5S. They are all updated with the most recent system software.
On my MacBook Pro, the conversations that are split on my iPhone and iPad are not split. On the MacBook Pro, all of the texts from both conversations are appearing in one. In my contacts which are syncing with iCloud I have both the phone number and email address of this other person.
I have messages set up on all of my devices to send and receive from my phone number and my email, start new conversations is from my phone number. This other person has it set up the exact same way on all of their devices.
So why when I text this person from one conversation thread and they respond it comes through to the other conversation thread?
Why can't I seem to join these two conversations when everything is set up the way it should be and they ARE joined on my MacBook Pro but not my iPhone and iPad?

She kept the same number on her new phone, but now there are 2 conversation threads. A new one started with messages sent from the new phone, the old phone should be out of service now. Why didn''t messages sent by the new phone resume in the same conversation? I assume because it's a different IMEI. But now whenever I use her phone number to create a new message, it goes in the old IMEI*'s conversation thread and is therefore not delivered. It's in green so it thinks it's an SMS also not a iMessage device.
If I want to send a message correctly to the new phone, I have to make sure I go into the correct newer thread and enter it there,
For your second answer, the person is receiving the message but the thread now says "email address", not the person's name in the contact list. The sender is sending to the person's phone number, not her email address.

Run multiple unix commands from ODI procedure

I want to run a series of unix commands from ODI procedure. I dont want to use Unix shell scripts. (I know that works).I am just trying to place the contents of the shell scripts in ODI procedure with Operating system as technology. But I am unable to execute the proecedure.
For example below is a very small 3 line commands I would execute
filename="/var/test.txt"
ls -l $filename > /var/anotherfile.txt
chmod 777 $filename
I am not sure if there is any specific syntax that I have to follow for executing unix commands. Also I dont want to write a Jython and use os.system command as well.
Appreciate any help on this

First your original question... You can put more than one DOS command on a single line, simply separate each command with an ampersand (&). For example:
mkdir c:\abc & cd abc & dir*
Regarding your concerns about performance, well that would depend on exactly what you mean. Using CLIENT_HOST (or HOST on the server) simply opens a shell (DOS in this case) then passes your command to it. The performance of performing this action really isn't measurable. Basically you are just pressing a button and you should get a near immediate action. As for the performance of executing each command, that has nothing to do with Forms. Once the command is passed to the shell, the rest is a function of the shell and whatever command you passed.
Having said that, if you were to write something sloppy like a loop (in pl/sql) which called CLIENT_HOST lots of times repeatedly, then yes there would be a performance problem because the pushing of the button will cause an exchange to and from the server and each cycle in the loop will do the same.
So the answer to how performance is impacted will depend on what exactly you need to accomplish. If it is a single call to CLIENT_HOST, this should be fine.

How to run multiple DOS commands from a single Webutil Client_Host session?

Hello all,
I have a requirement where I need to create an interface with SVN from Forms for basic checkin-checkout of files.
So, I've been trying to use webutil client_host to open a command line session and issue svn commands.
For svn, sometimes I need to give multiple commands like change to a particular directory and then run an svn command.
But client_host takes in only one command at a time and I'm unable to issue a series of DOS commands to perform
a particular task.
Is there a way to do this?
Pls suggest.
Regards,
Sam

First your original question... You can put more than one DOS command on a single line, simply separate each command with an ampersand (&). For example:
mkdir c:\abc & cd abc & dir*
Regarding your concerns about performance, well that would depend on exactly what you mean. Using CLIENT_HOST (or HOST on the server) simply opens a shell (DOS in this case) then passes your command to it. The performance of performing this action really isn't measurable. Basically you are just pressing a button and you should get a near immediate action. As for the performance of executing each command, that has nothing to do with Forms. Once the command is passed to the shell, the rest is a function of the shell and whatever command you passed.
Having said that, if you were to write something sloppy like a loop (in pl/sql) which called CLIENT_HOST lots of times repeatedly, then yes there would be a performance problem because the pushing of the button will cause an exchange to and from the server and each cycle in the loop will do the same.
So the answer to how performance is impacted will depend on what exactly you need to accomplish. If it is a single call to CLIENT_HOST, this should be fine.

Multiple programs recording from same sou

Hi, I have a audigy and I cant use the record function in multiple programs. Like, when im using the teamspeak and try to open skype, just the teamspeak can record from microphone and skype dont work.
Any help, thank you.

You would have to close your DAQmx reference in one vi before another vi could open one on the same DAQ device. You could have some sort of flag variable, maybe a LV style functional global, that would signal the need for DAQ use. Some sort of arbitration scheme in a separate vi would determine who gets priority over DAQ use. It would then send signals (more funtional globals) to each subvi telling them who should close and who should open. The differenct vi's would have to coninually poll the functional globals to see if they should open or close their session. This will be quite complex.
- tbob
Inventor of the WORM Global

Question about creating multiple output files from same query

I have a query like this:
select * from emp;
ename empno deptno
Scott 10001 10
Tiger 10002 10
Hanson 10003 20
Jason 10004 30
I need to create multiple output files in xml format for each dept
example:
emp_dept_10.xml
emp_dept_20.xml
emp_dept_30.xml
each file will have the information for employees in different departmemts.
The reason I need to do this is to avoid executing the same query 200 times for generating the same output for different departments. Please let me know if it is practically possible to do this.
Any input is greatly appreciated.
Thanks a lot!!

You can write a shell script to generate the multiple spools files for the same output. Below script may helps you.
#====================
#!/bin/bash
n=0
while [ $n -le 20 ]
do
n=`expr $n + 1`
sqlplus -s system/manager <<EOF
spool emp_dept_$n.xml
select count(1) from tab;
spool off
EOF
done
#====================

Question about creating multiple XML files from same query

I have a query like this:
select * from emp;
ename empno deptno
Scott 10001 10
Tiger 10002 10
Hanson 10003 20
Jason 10004 30
I need to create multiple output files in xml format for each dept
example:
emp_dept_10.xml
emp_dept_20.xml
emp_dept_30.xml
each file will have the information for employees in different departmemts.
We are using DBMS_XMLGEN package to generate XML.
The reason I need to do this is to avoid executing the same query 200 times for generating the same output for different departments. Please let me know if it is practically possible to do this.
Any input is greatly appreciated.
Thanks a lot!!

one solution i can think of is to use SQLX operator instead of dbms_xmlgen.
here is a sample example.
declare
l_xmltype xmltype;
l_deptno emp.deptno%type;
begin
for i in (select * from emp order by deptno)
loop
    select xmlconcat(
                xmlelement("ename", i.ename)
               ,xmlelement("sal", i.sal)
               ,xmlelement("detpno", i.deptno))
      into l_xmltype from dual;
    dbms_output.put_line(l_xmltype.GetClobVal());
end loop;
end;
/Now here you can open the query once, keep writing to the file till the deptno
is same, when the deptno changes, close the file and open a new file with new
deptno and start writing.
Note : in this way you will have to add the xmlprolog manually to each of the file which should not be an issue. after opening the file add the prolog string manually.
Hope this helps.

Create multiple external tables from same flat file ?

using oracle 10g
currently create many external tables like so..
CREATE TABLE "XT_UNITS"
"Q1_2012" VARCHAR2(25 BYTE),
"Q2_2012" VARCHAR2(25 BYTE),
"Q3_2012" VARCHAR2(25 BYTE),
"Q4_2012" VARCHAR2(25 BYTE)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER DEFAULT DIRECTORY "XE_FILES" ACCESS PARAMETERS ( records delimited BY newline
skip 1 fields terminated BY ',' OPTIONALLY ENCLOSED BY '"' MISSING FIELD VALUES
ARE NULL ) LOCATION ( 'xtunits.csv' ))
is there any way I can use 1 flat file (csv) to populate many external tables ?
maybe by section ?

Jay wrote:
using oracle 10g
currently create many external tables like so..
CREATE TABLE "XT_UNITS"
"Q1_2012" VARCHAR2(25 BYTE),
"Q2_2012" VARCHAR2(25 BYTE),
"Q3_2012" VARCHAR2(25 BYTE),
"Q4_2012" VARCHAR2(25 BYTE)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER DEFAULT DIRECTORY "XE_FILES" ACCESS PARAMETERS ( records delimited BY newline
skip 1 fields terminated BY ',' OPTIONALLY ENCLOSED BY '"' MISSING FIELD VALUES
ARE NULL ) LOCATION ( 'xtunits.csv' ))
is there any way I can use 1 flat file (csv) to populate many external tables ?
maybe by section ?Not a logical question.
An external table definition relates to one or more files.
You could probably create multiple externable table definitions to access the same file(s), but you may end up with some operating system file locking issues if you're not careful, and to be honest why would you need to do that?

Multiple Receiver Dtermination from Same Business Sender Service to RecvStp

Hi,
I was trying to implement FORK STEP in ccBPM. Scenario I'm trying to implement is, using fork bundle PO with same items together.
Can anybody help me to create multiple receiver dterminations for three receiver steps in three branches of fork step, where a common business sender service and same Integration process is used for receiving messages into SAP XI.
Please advice soon,
Thank You,

Hi Murali,
If it's always the same message, only one receiver determination is necessary. I'd also rather tend to do the capturing within a loop which is executed three times.
Best regards
Joachim

Can you install apps on multiple iphones/ipods from same itunes account?

Hello, My first post so please be gentle. I will be picking up my 3g in an hour or 2 and have a few apps lined up including super monkeyball. My wife has an 8g touch. We have seperate pc's each with their own library and installation of itunes although both signed in to my account. Itunes has let me download super monkeyball on both pc's ( same account ). Will it let me install the game to my iphone and my wifes touch? I'm pretty new to itunes and have never even purchased music through it yet but I understand purchased music can be downloaded to 5 seperate pc's and unlimmited ipods? is that correct? I would be surprised if this was the same for applications.

Your answer is yes although you were going to attempt it in a few hours anyway so why bother asking? Oh that's right you're excited

Multiple xpjs drawing from same set of folders?

Is it possible to use a set of common folders in multiple
help projects? That is, have html files stored in one set of
folders (that are already configured to support a complex TOC
structure) and have several xpjs access them? No individual html
file would be used by more than one xpj.

How many sedatives can you afford?
Not sure why you would want to do this. The obvious thought
was common topics but you have ruled that out.
If you want different outputs, why not use conditional build
tags?

Running multiple java commands from a script

Hi, I am running Cygwin on windows XP professional.
I keep recompiling some files with javac as I change them very often. To save some time, I made a script "tout.txt" including the three following commands :
javac JpanColl.java
javac AppliTest.java
java AppliTest
There is no problem with the java command that launches a JFrame but it launches the old version since the two java commands don't compute.
This is the message I get :
javac Invalid flag: Jpancoll.java
etc.
Thanks

You guys didnt play enough Highlights for Kids covers
as a kid, lol.
javac JpanColl.java
javac Invalid flag: Jpancoll.java
all things java are cAsE sEnSiTiVe.Yes thanks for the input. I did note the incorrect name, however, Windows doesn't actually care, it matters at runtime but not compile time. Also invalid flag is not the type of error message one would see with that sort of error anyway.
Bottom line: nice guess but you're wrong.

Multiple nohup commands from same path

Similar Messages

Maybe you are looking for