Multiple Objects in Authorizations

Hi all,
i have created a role, adding transaction MM01 first and maintained object M_MATE_BUK. Let say Activity: 01, 02, 03, 06 and 08.
Again i am adding a transaction code called MM02 and MM03 which will have the same auth object M_MATE_BUK with default values maintained like Activity: 01, 02, 03.
Now, i will be having three entries for the same object M_MATE_BUK which make my authorization tree little complicated. All i want to do now is remove the multiple entries. I do found a solution for this one while searching Julius Bussche WIKI's please correct my understanding.
**In SU24, maintain the proposal values (Object: M_MATE_BUK) to NO for the both the MM02 and MM03, i believe there won't be a multiple entries**
Thks
Karthick

Dear Rainer/ Shekar/Bernhard
Thanks for your reply. I tried all the ways as you all advised and everything is working fine and i am comfortable now.
Just want to know more, for MM01 i have maintained act as 01 and 02; whereas while adding MM02 later some time i have maintained act 03 and 04 for the same object M_MATE_BUK. Basically now i will have the object showing twice (I can't go for merging). In such cases can i go ahead and maintain all activity (01, 02, 03 and 04) in one object and delete the other one. If i do i believe the user still can use the all the above acitivity. Am I Right?
Thks
Karthick

Similar Messages

Authorization Object and Authorization...!!!

Hi BW Experts,
Could anyone plz tell me what is the difference between Authorization Object and Authorization..!!!
Thanks in Advance.
Regards,
Giftedbrain.

Giftedbrain,
Authorization Object:
An authorization object groups up to ten fields that are related by AND.
An authorization object allows complex tests of an authorization for multiple conditions. Authorizations allow users to execute actions within the system. For an authorization check to be successful, all field values of the authorization object must be appropriately maintained in the user master.
Authorization objects are divided into classes for comprehensibility. An object class is a logical combination of authorization objects and corresponds, for example, to an application (financial accounting, human resources, and so on). The line of the authorization object class is colored orange in the profile generator.
For information about maintaining the authorization values, double click an authorization object.
The line of the authorization object is colored green in the profile generator.
Authorization:
Definition of an authorization object, that is, a combination of permissible values in each authorization field of an authorization object.
An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
Authorizations allow you to specify any number of single values or value ranges for a field of an authorization object. You can also allow all values, or allow an empty field as a permissible value.
If you change authorizations, all users whose authorization profile contains these authorizations are affected.
As a system administrator, you can change authorizations in the following ways:
· You can extend and change the SAP defaults with role maintenance.
· You can change authorizations manually. These changes take effect for the relevant users as soon as you activate the authorization.
The programmer of a function decides whether, where and how authorizations are to be checked. The program determines whether the user has sufficient authorization for a particular activity. To do this, it compares the field values specified in the program with the values contained in the authorizations of the user master record.
The line of the authorization is colored yellow in the profile generator.
-Doodle

Error message "multiple objects found"

Hi,
I run into a new issue and durig role creation of design-time-roles. I get since a few days the message
"test:testrole.hdbrole": multiple objects found
my simplified role: (worked out before hundred times)
test::test
extends role test::testrole
The role exists as design-time-object (one entry in "_SYS_REPO"."ACTIVE_OBJECT" and also only one entry in "SYS"."ROLES")
Other roles can be granted as as usual - just a bunch of them make trouble.
I dropped the roles (afterwards 0 entries in the mentioned tables) ... when activating testrole.hdbrole it says no object found - as expected. created the role again and the message appears again. Pretty weird.
Did one of you had the same issue and solved it?
Thanks for your answers in advance!
Regards,
Marcus
P.S: Running HANA SP7 Rev 72 (DB+Studio+Client)

Hi Mika
Can you check your : HKLM\SOFTWARE\Microsoft\Office\xxxx\Outlook\InstallRoot\Path
For each key under HKLM\SOFTWARE\Microsoft\Office, apparently HKLM\SOFTWARE\Microsoft\Office\xxxx\Outlook\InstallRoot\Path has a "Outlook.exe" file at the location.
If more than 1 file paths are found, then it appears that multiple versions of the outlook are installed.
You might want to re install office if more thaqn one appears

Multiple objects to have the same rollover state at the same time (but link to different pages)

Hi,
I have a mac
I would like to know how i can have multiple images with the same rollover states - but which show up at the same time on more than one image, (but each item to have its own linking property applied to it)?
see image below: i want both box 'A' to pop with the same rollover state even if I'm hovering on just one of the boxes. But i want each of the boxes to link to different pages in my website.
Ive tried grouping the images and moving them to their own layer, but the rollovers aren't 'linking' together on multiple objects
help!
thanks

It's not, but you don't need that to achieve the behavior you've described. A1, a trigger, will have the states and hyperlink you desire. On rollover it will show its rollover state and will show its target container which will be directly on top of A2. It will look like a rollover state for A2. Repeat this for A2, B1 and B2 and I believe you achieve the behavior you've described. It's just a different way of approaching the problem (that happens to fit the tools available in Muse).

How do I create multiple objects during runtime?

I don't know how to create multiple objects during runtime, here's my problem:
I get a String as input. Then I create an object called newobject. I put the object in a hashtable with the above string as key.
Then comes the problem, in order to create a new object, I have to rerun the same class, which uses the same name (newobject) to create a 2nd object. Now my hashtable doesn't reference to my 1st object anymore...
Is there anyway I can fill up the hashtable with different objects, and make each key point to each object it was supposed to?
For those who want to see a bit of the program:
public class PlayBalloon{
public Hashtable ht = new Hashtable();
for(){
Balloon pB = newBalloon;
newBalloon=new Balloon(pB);
ht.put("Some input from user", newBalloon);
for(){
ht.get(s).draw;<= s=string, draw=own meth. in Balloon
}

I think i can see the problem that you are having. You have, in effect, duplicate keys in your hashtable - ie, two strings used as keys with the same name.
The way that a hashtable works is as follows...
When you ask for a value that is mapped to a key it will go through the table and return the first occurence it finds of the key you asked for. It does this by using the equals() method of whatever object the key is (in your case it is a String).
If you cant use different Strings for your keys in your hashtable then i would consider writing an ObjectNameKey class which contains the String value that you are trying to put in the hashtable and an occurrence number/index or something to make it unique. Remember to override the equals method in your ObjectNameKey object or else the hash lookup will not work. For example
class ObjectNameKey {
    private String name;
    private int occurence;
    public ObjectNameKey(String name, int occ) {
        this.name = name;
        this.occurence = occ;
    public String getName() {
        return name;
    public String getOccur() {
        return occurence;
    public boolean equals(Object o) {
        if (!(o instanceof ObjectNameKey)) {
            return false;
        ObjectNameKey onk = (ObjectNameKey)o;
        if (onk.getName().equals(name) && onk.getOccur() == occurence) return true;
        return false;

Using Multiple Object Types in a FIM Managed Criteria Distribution Group

Is it possible to use multiple object types in a criteria based distribution group. So when building your criteria filter, "Select (object type) that match (all/any) of the following condiftions". Currently you can only choose 1 object type and
I want to be able to choose object type "user" and a custom object type I create for my contacts

You can create main condition as "any" and later add two sub-conditions - one that object in set "All People" and other sub-condition that object in set "All Contacts" or "All Groups".
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Error while doing multiple object updation from EP ! object lock error

HI all,
I am doing multiple object updation using a standard RFC(BAPI_PROJECT_MAINTAIN). The RFC i am calling from Enterprise portal. I am sending data to RFC one by one. But the error i am getting is object is locked by user so data can't be save.
Though i am using Lock and unlock method before and after calling RFC the project lock error comes up.
What might be the reason
regards
sandeep

Hi Sandeep,
Is the RFC you use for locking in the same model as the bapi BAPI_PROJECT_MAINTAIN? If it is not then you are using two connections for communication with the sap R/3 backend.
You can do 2 things.
1. You could add the RFCs for locking in the same model as the BAPI_PROJECT_MAINTAIN
2. Instead of adding the RFCs in one model synchronize the connections the models use as follows:
IWDDynamicRFCModel model1 = (IWDDynamicRFCModel) WDModelFactory.getModelInstance(Model1.class);
IWDDynamicRFCModel model2 = (IWDDynamicRFCModel) WDModelFactory.getModelInstance(Model2.class);
model1.setConnectionProvider(model2);
You can do this in the wdDoInit. This will make sure both models use the same connection but closing a connection will close both at the same time.
The same problem applies to commit/rollback functionality.
Regards,
Jeschael

Is there a way to shift select multiple objects in layer palette, not just highlight multiple object

Hi,
Is there a way to shift select multiple objects in layer palette, not just highlight multiple objects?
I would want to do this when I have a bunch of objects hidden under some other objects on the artboard. This feature is available in PSD, so I assume Illustrator should have it.
Thanks!

Thanks for the reply, Harron.
I'm using CS4 & below.
Highlighting object - click on object in layers palette & it turns blue
Select object - click on object in layers palette to the right of the circle, which creates a square, and selects the object on the artboard
How do I shift-select multiple objects in the layers palette...select 50 objects with a click, then a shift-click? Shift-select works for highlighting, but not selecting. On most programs shift-select is used to grab a bunch of stuff...:0)
In the past I have inadvertently selected multiple objects in the layers palette, by somehow alt?-dragging over the layers...or something...I can't re-create it.

Can I put multiple object placeholder in Master slide?

I would like to know if I can creat multiple object placeholder in Master slide or not. After searching the disccusion, seems that this problem occur since Keynote 03 and is not improved till Keynote 09 now. In fact, I would like to make a slide show of multiple photos, but I would like to arrange several photos in one slide and exactly the same position and size in each slide. So, it would be easiler if I can make a master slide with mulitple object placeholders. Can anyone help or if there is any alternative ways? Thank you.

Apple Maps is not a GIS application. It might be one day. For now, you will have to use ArcGIS or something similar.

Selecting Multiple objects in Pages for ipad

On regular pages, I can select multiple objects (text boxes, etc) by holding shift then clicking on it. Is there a way to do that in Pages for IPAD?

With one finger select an object and hold with another finger select the other objects one by one.
Message was edited by: David M Brewer

Opening multiple objects in Photoshop

Sorry but I'm new to the wonderful world of Macs having been dancing with the PC devil for too long!
When using Photoshop, in the PC world, when opening any image, the background to the workspace is a uniform grey. On my shiny new Mac, the background to any image that I open is actually the desktop background. What this means is that my photoshop images "float" over what ever stuff is still open on my desktop and this can be extremely distracting.
When I open Word (yes the Mac Word), I also get the same transparent background workspace.
Is there a way I can set my Mac so that when I open up Photoshop (and any other program that can have multiple objects of different sizes open at once) so that the workspace default background is some sort of uniform grey and not the clutter of the other programs that are open on my desktop?
Thanks, and sorry if this is a really obvious question.
Chris

There are several things you can do:
1. In Photoshop itself you can choose Full Screen mode from the Tools Palette, it is the middle icon of the three little screen icons in the next to last row of goodies at the bottom. There is a variant (the last one) which also hides the menu bar and displays on a black background. Full Screen mode displays on a 50% gray background.
2. If you want to keep the ability to quickly access other PS windows or the Finder Desktop items with a mouse click, you can simply hide other applications. Click hold on a running application in the Dock and choose hide.
3. I have my main monitor set at a neutral gray, and keep Desktop clutter to a bare minimum. I also routinely hide applications I'm not using by using Option click into the one I'm currently using. You bring back an application by a click or option click on its Dock icon (the Option click hides the application you are leaving).
The black screen option in Photoshop is kinda neat: if you hit the tab key after selecting it the tool palettes are hidden too. If you have rulers turned on you can toggle them off with Command-R, and see your image in splendid isolation from anything at all.
Francine
Francine
Schwieder

DITA - Multiple objects in anchored frame

Hi,
I'm using the DITA features in FrameMaker 9. I'd like to insert multiple objects in an anchored frame in a DITA topic.
Right now, if I save an image element containing multiple objects, FrameMaker discards any extra objects in the frame. I've also experimented with adding extra graphics elements to the DTD using the attributes listed in the Structure Application Developer Guide. I can save DITA topics containing the custom elements, but they are not added to the XML file though I can see them in the FrameMaker interface. I have not yet experimented with a DITA specialization.
When exporting anchored frames in Structured FrameMaker to XML, FrameMaker bundles multiple objects in a frame into a single CGM file.
Is there a way to export anchored frames to CGM files before saving DITA topics? Is there a plug-in out there that will automatically save the objects in a frame? Can I use read/write rules to define how to treat these frames? How about creating a specialization on the objects element?
I'd like to use the tools in FrameMaker to modify elements in an anchored frame. I don't see why doing this should break the DITA model if these objects are bundled into a single file on export.
Thanks,
- Maura

Hi Maura...
The short answer is .. you can't do that.
DITA knows nothing about "frames" and only allows a single object to be referenced by an image element, so to remain in compliance with the DITA specification the content of a frame is tightly controlled by FM. There's nothing that you'll be able to do via read/write rules or EDD tricks to get FM to write out the data from multiple objects as a CGM .. this is overridden by the internal DITA plugin within Frame. You're correct that in theory FM could merge multiple graphics into a CGM, but this really wouldn't be a good way to operate since the text or other objects would no longer be editable. You can do this now using Illustrator or other applications that let you store the text and objects on separate layers, then save to a single file. Reference this single file in the image element in DITA.
That said .. we are looking into supporting some subset of multiple graphic objects within a frame in DITA-FMx, and this feature may be available in an upcoming beta.
http://leximation.com/dita-fmx/
Cheers,
...scott
Scott Prentice
Leximation, Inc.
www.leximation.com

How to image trace multiple objects at once on Illustrator CC?

Hello,
This may sound like a stupid question, but I am having troubles trying to image trace multiple objects all in one go.
I'm currently working on Illustrator CC and I remember this process being a lot easier to do on Illustrator CS5.
I have a typical job where I create client specific barcodes on a separate program, and then bringing them into Illustrator to vectorize.
When I used to do it in CS5, all I had to do was release clipping masks, select all 50 or so barcodes, then Image Trace - and voila, al of my barcodes were vectorized at once - easy.
I now have to vectorize about 120+ barcodes and Illustrator CC is only letting me select & image trace one barcode at a time. There has to be a better way, and I'm hoping someone here can help.
(I would open up CS5 and do it from there, but my work computer was recently replaced with a newer iMac and was only provided with Illustrator CC)
Thanks!

Not sure what your barcode-specific challenges and methods may be, but my general aversion to the image trace feature compels me to suggest that you just create the barcodes in vectors in the first place. I do that using Terry Burton's free online barcode generator.

Can Multiple Objects be copied into Sales Order??????

Hi,
I have created three charecteristics and assigned to a class of class type 001. In the classification view of material master for each material i assigned the class.This assignment is done for calling the object at sales order level.
I am able to find the multiple objects for single characteristics in sales order but multiple objects are not copied into sales order..only single object is copied into sales order...when i try to copy multiple objects system is throwing warning message as "You can only copy one object in this mode".... Is it possible to copy multiple objects ?? Any answers will be highly appreciated.
Ramagiri.

Hi,
But what's the purpose behind that.Material Class 001 is just only for information purpose only to search the materials with help of class and characterstic.
If your material is configuable one then you have to use Class type 200 - Material (Configurable Objects) and for the same you have maintain the characterstic value during sales order creation.
Regards,
Dhaval

Flatten Multiple Objects in a PDF

Can anyone let me now how to flatten multiple objects in a single Page PDF

Not sure you understand the definition of "flatten" in PDF:
Flattening a page means that annotations (comments and markups) are converted into elements on the page, and are removed from the comments list. The page objects (text, vectors, bitmaps etc.) are not altered in any way, not combined and not rasterized.
If you want to convert an entire page into a bitmap image of a page, then export the file as a series of images (File > Save As > Image) and combine them back into a PDF, making sure to disable OCR. If you want to selectively-combine some page elements and retain others, you will need to do that in the original file, or import the page into Adobe Illustrator and perform the edits there. Acrobat can't do it.
If you want to flatten comments, in the sense I described above, then you can either open the debug console (Ctrl-J) and type flattenPages() [press ENTER], or use one of the scripted add-on tools which run the command via menu items or panel buttons.

Multiple Objects in Authorizations

Similar Messages

Maybe you are looking for