Multiple Objects With Event Trigger Effects Issue

I have a custom container that derives from the Canvas class that has a bunch of child objects in it. Is there a way to treat all of those objects as a single object in regards to triggering events / effects on them?
For example, my custom container has a 48x48 pixel image and a label overlayed on that image. Eventually there will be quite a few more objects in it but I am keeping it simple for now. I assign a fade in and fade out effect to the custom container triggered by mouse over and mouse out events and set the targets of the effect to getChildren( ). This works in the sense that when you mouse over the image, both the image and the label fade in.
The problem is that if I move the mouse over the image and then continue up across the label, the mouse out triggers for the image and the mouse over triggers for the label cause the fade to "flicker" for a brief instant. When the event listeners are set on the custom component this flickering happens a lot and starts before the mouse even gets to the icon since the canvas and other behind the scenes components of the container surround the image.
I do not want to remove the listeners on the label incase the use triggers the mouse over via the image but then moves the mouse out of the label or vice versa.
Is there a better way to handle this? I was going to start going down the path of checking the mouse position at the beginning of an event to see if it is still over another one of the objects and if so, ignore that event. Is that the right idea or am I overlooking an easier way?
Thanks.

MouseEvent.ROLL_OVER and ROLL_OUT instead of MOUSE_OVER and MOUSE_OUT

Similar Messages

Apply multiple effects to multiple objects with single click box

I would like to click on a click box and have one object appear and another object disappear. I guess what I'd like to do is apply effects to multiple objects with a single click box. Is that possible?
Thank you.

Welcome to our community
Sure it can be done but you won't use effects to do it.
When you insert an object in Captivate, you have an option to enable or disable Visibility. You also have an option to name the object. So you would give the object a meaningful name and clear the Visibility option to "hide" it until needed.
Then you would create an Advanced Action that would hide some objects and show others.
After that, you would assign the Advanced Action to a Click Box or a Button or some other event.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Multiple objects with guid (cross forest mailbox move)

Hi,
While moving 1500 mailbox from 2007 forest to 2010 forest I had a problem with 2 users. When I run the move mailbox script fot these users I got the error below. Any ideas?
New-MoveRequest : Multiple objects with Guid fb091806-4ef7-4a36-8705-8f2c9bb25080 were found.
At C:\Exc2010\script\MoveMailboxes.ps1:22 char:16
+ New-MoveRequest <<<<   -Identity $($entry.PrimarySMTPAddress) -RemoteLegacy -RemoteGlobalCatalog $RemoteDomainCont
roller -RemoteCredential $RemoteCredentials   -BadItemLimit 2000 -AcceptLargeDataLoss   -TargetDeliveryDomain mydomain.com.tr
    + CategoryInfo          : NotSpecified: (0:Int32) [New-MoveRequest], RemotePermanentException
    + FullyQualifiedErrorId : 68322CDA,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
Those who are skilled in combat do not become angered, those who are skilled at winning do not become afraid. Thus the wise win before the fight, while the ignorant fight to win.

Hi,
Please try to move the mailbox manually and check the issue again.
Looks like multiple objects have the overlapping GUID. Please check it.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sean Xiao
TechNet Community Support

How to separate an object with a 3d effect

How to separate an object with a 3d effect
Hi, I have outlined some text and applied a 3d effect but now I want to separate each letter so I can adjust the colour on the face of the letter with the colour on the extruded part.
I am sure it is probably straight forward but could do with a little help!
Thanks

I think what the OP wants to do is to keep the extruded part the same color and change the face of the letters to different colors. And he/she did mention that the text is outlined.
If that's the case, I can think of two things to do if you want to keep the 3D effect live (i.e., unexpanded).
1. You could apply a stroke to the outlined text, in the color you want for the extruded part. Then just change the fills individually (Tip: view in Outline mode and use the Group Selection tool to select each letter).
2. If you don't like how the stroke looks on the letters, make all the letters the same color — the color you want for the extruded part. Then make a copy of this group of letters. Select the copy, then click in the Appearance panel to to edit the 3D effect. Put the Extruded Depth at Zero. Now chnage the colors to your liking, then align them with the original. Interestingly, you can't just use the Align functions, you have to eyeball it.

Is it possible to scale an object with a grain effect?

Is it possible to scale an object with a grain effect?
It seems that checking "scale strokes and effects" doesn't work for grain at all. Scaling up image makes grain much more delicate and smooth. Any ideas?

Jacob,
Thanks! That worked as I wanted to.
Your answer is most appreciated.
Best,
Ania

Move multiple objects with on click

Hi there
I am using Greensocks TweenMax to try and move multiple object across the screen with the onclick function. My code is not showing up errors and my Elements are at the front of the page but nothing happens when I click the element
Here is my code, any help would be appricated
// insert code for mouse click here
TweenMax.to(sym.$("Geyser_Pic"), 1, {css:{right:"0px"}, ease:Expo.easeout});
TweenMax.to(sym.$("Volcano"), 1, {css:{right:"150px"}, ease:Expo.easeout});
TweenMax.to(sym.$("HotSpring"), 1, {css:{right:"100px"}, ease:Expo.easeout});

Since you are saying you do not see any errors in the browser console,
see if your click event is actually getting trigerred.Add a alert in the click event listener.
If the event is getting trigerred,can you share or private message me your files .I will try to nail the issue.

Selecting Multiple Objects with Output Preview Causing Problems

I'm trying to edit a PDF and need to select multiple objects. Without Output Preview open, I can easily select all the items I need using the shift key. With Output Preview open, whenever I try to select the second object, Output Preview creates a sticky note, instead of selecting the second object.
I am also using the PitStop Pro plug-in.
Any idea how to correct this problem? Thanks!

Unfortunately it seems that the new sticky note feature with the output preview in Acrobat XI uses the same keyboard shortcut as multiple selection tool in Pitstop (shift).
Closing the output preview is the easiest way to get around this issue.
We could consider changing the key for multiple selection in PitStop, but 'shift' is pretty much a default, so what could we change it too?
If anyone has any thoughts could they email me, I am the product manager responsible for Pitstop at Enfocus and my email is '[email protected]'
All feedback gratefully received.

Pages '09: Can't select multiple objects with mouse?

Hello! I want to select some shapes. I know that I can hold down shift and click on them individually one by one, but they're very many and grouped together, so I just want to draw a 'selection-rectangle' with the mouse, just as it works in all other programs I've ever used. But this doesn't seem to work. What am I doing wrong?

Hello Stef,
You can simply click and drag over an area to select multiple objects if you are in a Page Layout document, but since this is your fourth post you may be new to Pages and you may not yet even be aware of the Page Layout mode. At the top of your Pages window is the document title and next to the title in parentheses are the words "Word Processing" or "Page Layout".
So, in a Word Processing document, it's just a little bit more involved. In the upper left corner of the window, click on the View icon and select "Show Layout". You will see gray around the edges - your desktop, a white sheet - your paper, and three rectangular outlines - the header field, the text frame and the footer field. This assumes that you have the Header and Footer turned on.
As you move your mouse, the text insertion bar, a vertical line with curved features top and bottom, will move about the document. Move the insertion bar to the margin, outside of the boxes, and press and hold the COMMAND key. Your cursor will change to an arrowhead. Now you can select multiple objects by click-dragging, just as you are accustomed to doing in other applications.
Regards,
Jerry

Selecting multiple objects with Direct Select tool

I'm working in InDesign CS4 on a pc and am having trouble with the Direct select tool. I go through my document selecting multiple objects, change the color of the selected boxes only to find that about half of my objects have "deselected" themselves. Has anyone else had this problem? Or does anyone have a fix I could try? Thanks!

I know, I was pretty vague.
Are you continuing to hold the shift key with each addition? Yes
Are you trying to selct things on more than one spread? No
Are you being careful to click inside each object other than an image and on the frame for an image? Yes

New Local Move Request fails with error "Multiple objects with Guid hex octet string were found."

I can find nothing searching online. Trying to move the last user mailbox from one server to another, but it fails with this error. I have checked all mailboxes for the same GUID but can't locate it anywhere. Anybody have some suggestions?

Does anyone know if there is a way to perform a search based on mailbox GUID? Maybe I could find all objects with the same and it could lead me in the right direction.
Hi,
To find the object that belongs to a GUID, you can refer to this blog.
http://blogs.technet.com/b/ehlro/archive/2010/04/22/how-to-find-the-object-that-belongs-to-a-guid.aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Refer to multiple objects with 1 variable

In general, how would one do that?
In an object, I can declare a variable to be another object, but really I want to access multiple rawValues.
So if I have 2 fields, I'd like to have something like:
var A = textfield1 ||
textfield2;
if (A.rawValue == null) {
do something;
In this example, there's no need to even use variables of course, but if I want to reference 200 fields, there has to be an efficient way of doing it (related to another question I asked about required fields). Any ideas? Variables are new to me-I've used some Form Variables, but I've set them equal to hard-coded numbers.
Thanks!

Hi,
In relation to Form Variables, which are initially set in the File > Form Properties > Variables. You can set the value of the Form Variable (and get it) using the .value. So for example if the Form Variable was called myVariable, the following would apply:
myVariable.value = 10; // Sets the variable
app.alert(myVariable.value); // Would pop a message with 10
That's not the issue here. I think the best route would be to put the 200 fields into a container/subform and then have script loop through the contents of the container/subform. Paul Guerette's LockAllFields is a great example of such a loop. There is an amended version of it here: http://assure.ly/yDtfsM.
That cn be adapted to do anything with the objects, so it depends on what action you are after.
Hope that helps,
Niall

Process Chains with Event Trigger

Hi Experts,
Happy Valentine day.
I have a requirement to run a Process Chain using Event IDs. Now these Evenrt ID should be triggered by a Program which raises this Eovent. Then this Program should be scheduled in BAckground to run periodically. Has anyone done this before. If yes, could you please shower some light on this topic with details on the steps.
Thanks
DV

Hi,
1)You can make the process chain to be trigered by an event.
You create user events in SM62. In SM62, next to "User even names", click on Maintain and press Enter. Click on the Create icon to create a new event (let's call it ZEVENT).
Next, in your process chain, change the Start variant to be scheduled "After event", and put in ZEVENT for the event name. Also, click on the "Periodic job" at the bottom. This will automatically reschedule the jobs for the process chain after it executes.
Next, create an ABAP program (let's call it Z_EVENT_RAISE) to call the function module BP_EVENT_RAISE. You're code can look like this:
codeREPORT Z_EVENT_RAISE.
PARAMETERS: P_EVENT LIKE TBTCO-EVENTID.
CALL FUNCTION 'BP_EVENT_RAISE'
EXPORTING
EVENTID = P_EVENT.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.[/code]
This ABAP program will prompt for an event name, so you will need to create a variant (let's call it ZEVENT) which will save the value of the event name (also ZEVENT). You will need the variant name to be able to trigger the event in a batch job.
Now all you need is the batch job. Use tcode SM36 to create a batch job where you call the ABAP program (Z_EVENT_RAISE) using the variant (ZEVENT).
Note, SM64 only triggers an event manually.
and you can copy this job to schedule it three times a day.
2)In the Start process of your process chain, select Direct Scheduling and then click the Change Selections icon. This will bring you to the Start Time window where you can put in the Date/Time you want to start your process chain. At the bottom of this window, click on the Periodic job box and you will notice another icon way at the bottom called Period Values. Click this to determine what frequency the job should be rescheduled (ie. daily, weekly, etc.).
3)you can do this by right-clicking on the start process, selection "Maintain Variant", choose "Direct Scheduling". Next select "Change Selections", pick your date and time, set your period values and you're done.
Thanks,
JituK

How to "analyze" multiple clips with "Warp stabilizer"-effect preset

Is there a simple way to "analyze" multiple clips that have the Warp Stabilizer effect attached?
I have a sequence with 100 clips, which all have a customized Warp Stabilizer effect preset attached. I can attach the effect to all the clips very easily, but afterwards I have to manually press "Analyze" on each clip, which is quite irritating... Is there a shortcut?
I don’t use nesting because I have to tweak the effect-settings on some of the clips…

https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Yes, sadly custom presets with warp stabilizers don't work correctly. You have to go hit analyze manually for every clip. For you that may be quicker than changing your two settings for each clip. It is a bummer though. We actually use this effect several hundred times per week and prefer the "Position, Scale, Rotation" method in the settings but we can't use the custom preset because it doesn't properly re-analyze automatically like the default effect does. I'm not sure whether it'd be a bug report or a feature request (in my opinion it's a bug) but definitely report it to the link above.

Multiple objects with same name when rebuilding index online

I am looking for advice on how to handle a race-condition in sql server, related to reading metadata while an online index rebuild is being performed.
The problem is as follows:
At some point we execute the following statement:
SELECT
obj.object_id AS id,
scm.name AS scm,
obj.name AS name,
obj.type AS type,
ds.name AS dataspace_name,
prop.value AS description,
part.data_compression_desc as compression_desc
FROM sys.objects AS obj
INNER JOIN sys.schemas AS scm ON obj.schema_id = scm.schema_id
INNER JOIN sys.indexes AS idx ON obj.object_id = idx.object_id AND idx.type IN (0,1)
INNER JOIN sys.data_spaces AS ds ON idx.data_space_id = ds.data_space_id
INNER JOIN (SELECT object_id, data_compression_desc FROM sys.partitions WHERE index_id IN (0,1) /*Heap, Clustered*/) AS part ON part.object_id = obj.object_id
LEFT OUTER JOIN sys.extended_properties AS prop ON obj.object_id = prop.major_id AND prop.minor_id = 0 AND prop.class = 1 AND prop.name = 'Description'
WHERE obj.type = 'U' OR obj.type = 'S'";
The statement returns some metadata for indexes (indices?), the purpose of wich is not the subject.
When executed while an online index rebuild is running, a race condition occurs: When the rebuilding enters the final phase, the new index, which have the same name, becomes visible and thus results in two rows with the same name (from sys.object). I am unaware
if this only occurs for clustered index (which is what we have observed).
We became aware of this behaviour, as we added the metadata to a .Net Dictionary using name as key, and received a duplicate key exception. We have, hoewever, not been able to reproduce the situation, due to the nature of the race condition, and we found very
little documentation on the subject.
What we would like to do now, is to differentiate between the two. We see two options:
1) We could just use the first of the rows and ignore the second. This solution would require that the metadata for both rows are identical.
2) We could discern the "real" index from the "rebuilding" index. This requires some kind of extension of the Where-part.
We have not been able to determine if the requirements for either option is present, as we havent found any documentation, nor have we been able to test for differences, as we cannot reproduce the situation.
We would also like some way of reproducing the situation, so ideas as to how to do that is welcome.
Can anyone direct me to relevant documentation, or alternate solutions.
HRP

1. Use the index with the lower fragmentation to identify the newly rebuilt index (as it almost always will have lower fragmentation)
2. To reproduce, block the online index rebuild process by trying to alter the table's definition in a transaction (and don't commit, which will place schema lock on the table)
Satish Kartan http://www.sqlfood.com/

Settlement of Production order to multiple objects with settlement type PER

Hi All ,
We have a production order in which settlement profile says that , settlement to material is mandatory and settlement to cost center optional with u201C to be settled in full u201C
Default object type is MAT . In indicators portion we have 100% validation , % settlement , Equivalance numbers , amount settlement , variances to costing based COPA -all are selected .
In PP distribution rule , we have PP2 as default distribution rule   for the order type which means automatic generation of settlement rule for MTR 100% PER .
In settlement rule of the production order , We have Settlement to material PER 50 % & Settlement to Cost center 50% PER . Automatically generated settlement rule has been modified as above as per the requirement .
Although total % as per above is 100% ( Sum total of settlement to Material & Cost center ) , we are getting the error as
Settlement type PER: Total percentage in distribution rules <> 100%
Message no. KD562
Diagnosis
The distribution rule percentage total is 80,00 for settelement type PER.
·     Settlement type FUL:
The total of the distribution rule percentages must always be 100%.
Example:
1. Receiver cost center 4711   20%
2. Receiver cost center 4712   80%
                           Total 100%
·     Settlement type PER
You can use the settlement profile to stipulate whether the periodic settlement settles 100% of the costs, or whether less is allowed.
We can not change the settings of settlement profile for 100% validation & to be settled in full for business constrains .
Any idea , for the reason of the error , since the sum total % for settlement is 100% and possible solution ?
Thanks is advance for help
Regards ,
Arnob

Hi,
As per SAP help only the following fixed characteristics can be used for target fields.
Customer number (CO-PA KNDNR)
Product number (CO-PA ARTNR)
Business area (CO-PA GSBER)
Profit center (CO-PA PRCTR)
Sales organization (CO-PA VKORG)
Distribution channel (CO-PA VTWEG)
Division (CO-PA SPART)
Plant (CO-PA WERKS)
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/4c48c64a0111d1894c0000e829fbbd/frameset.htm
Even when i created a table look up with AUFK, in the target field i am not able to see COPA-KAUFN in the drop down.
Regards
Raghu

Multiple Objects With Event Trigger Effects Issue

Similar Messages

Maybe you are looking for