Multiple OEM agents installed
Good morning all,
Our test database is a single node db in Sun Microsystems Inc. (SunOS 5.10). The database version is 10.2.0.4. We have an oem agent (10.2.0.4) installed in this db server communicate with a 10g grid control. Everything is working fine. Now we are trying to migrate this db server under 11g grid control. So what we did is installing new version of agent (10.2.0.5) into a different directory and configure this agent to talk to 11g grid control. So basically we have two agents installed in this db server. One is 10.2.0.4 agent which is talking to 10g grid control and another agent 10.2.0.5 which is talking with 11g grid control. Although both agents are running but we experience some issues: First, we noticed that all listeners in the server are in “Status Pending” in 11g grid control but actually all listeners are up. Second, a notification rule has been setup in 11g grid control to monitor one db instance and I purposely set the threshold very low so I can receive the alert email. But the all the alert emails actually comes from 10g grid instead of 11g where I set threshold very low. I am not sure how agent works internally so I am not sure if multiple agents will ever be work in one db server. Does anybody have any thoughts on this? Any insights to share?
Greatly appreciate your help!
Shirley
Hi,
You not there are most of the things about a target which are stored locally on the target rather than on the GC itself. For example, if you set t matrix value for a database target, it is stored on the database itself whether you use 10g or 11g GC . Here in your case, i think your both GC are fighting together to monitor a single target which is configured on both and i think it will not be supported (you can confirm from MOS). So my advise will be to configure your targets with only one GC (either 10g or 11g)
Salman
Similar Messages
-
Error while installing OEM agent
Hi All
Below is my environment details.
Oracle - 10.2.0.4.0
Linux - RHEL5 - 2.6.18-128.1.6.el5
Two node RAC environment
I am following my company documents for installing OEM agent.
I executed the below command
agendDownload.linux_x64 -n <cluster_name> -c nodename1-vip,nodename2-vip
I got below error
Performing tests to see whether nodes nodename1-vip,nodename2-vip are available
SEVERE:OUI-25023:The local node is not selected for installing this product. Include the local node in the cluster list or perform the installation on the nodes on which the install is to be performed.
Can somebody help me why I got error. i pinged both the vips and am able to ping.
i have another doubt. Do i need to mention vip name or just host name?
Edited by: user1368801 on Aug 12, 2009 9:56 PMThanks Surachart
I checked the inventory.xml file
Only hostnames (not VIP) are mentioned in the inventory.xml file. That means, do i need to mention only host names?
Since I am following the company standard document, I need to be 100% sure before deviating from the document or else taking this vip issue to the document authors. -
Installing OEM agent 10.2.0.4 - pre-req fails: locale
Friends,
We are attempting to install an OEM agent 10.2.0.4 on AIX 5.1.
Just when we get to about 90% complete, we get an error regarding 'locale'.
WHen I checked the log file for the InstallActions, I find hundreds of errors related to:
INFO: ld: 0711-251 SEVERE ERROR: Symbol table entry 17 in object /oracle/product/agent10g/lib/libpls10.a[ociextp.o]:
Field n_offset contains -1726349312. Valid values are between 4 and 381.
ld: 0711-251 SEVERE ERROR: Symbol table entry 17 in object /oracle/product/agent10g/lib/libpls10.a[ociextp.o]:
Field n_offset contains -1726349312. Valid values are between 4 and 381.
Then, at the end of the log, I see:
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'itnsping nnfgt.o mkldflags client_sharedlib' of makefile '/oracle/product/agent10g/
network/lib/ins_net_client.mk'. See '/home/oracle/oraInventory/logs/installActions2009-04-14_01-41-51PM.log' for details.
Exception Severity: 1
Any ideas where I should start looking?
Thanks...Thanks Srini,
You found our problem.
I checked our AIX filesystem, and it seems someone had configured the /oracle mount point which contains the Oracle executable binaries and library files to use the 'cio' (concurrent i/o) option.
Thank you for pointing this out. I'm actually new to AIX, although many years on other operating systems.
I'm also new to this company and just getting my feet wet here with AIX and their existing configurations.
I'm going to write a memo advising our sys admins not to use cio mount option on any mount points except for those containing only the oracle data files.
Thanks again.
Ji Li -
Error installing 11gr1 oem agent on AIX 6.1
Hi ,
I am using the silent installation method for installating 11gr1 oem client using the doc"http://download.oracle.com/otndocs/products/oem/agent-files/64-bit/aix5l-64-11.1.0.1.0.-instructions.txt" ( 3.2. Silent installation of Management Agent). Below is the error i am getting , can some one help pass thru this error .
oracle > ./runInstaller -silent -responseFile /backup/11.1.0.7/OEM_AGENT_11gR1/aix/response/additional_agent.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 150 MB. Actual 3191 MB Passed
Checking swap space: must be greater than 150 MB. Actual 4096 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-11-22_03-52-01PM. Please wait ...oracle > Exception in thread "main" java.lang.NoClassDefFoundError: oracle.sysman.oii.oiix.OiixNetOps
at oracle.sysman.install.oneclick.EMGCInstallStaticVariables.<clinit>(EMGCInstallStaticVariables.java:119)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:200)
at oracle.sysman.install.oneclick.EMGCInstaller.parseCommandLineArgs(EMGCInstaller.java:506)
at oracle.sysman.install.oneclick.EMGCInstaller.init(EMGCInstaller.java:204)
at oracle.sysman.install.oneclick.EMGCInstaller.main(EMGCInstaller.java:1042)
Caused by: java.lang.ClassNotFoundException: oracle.sysman.oii.oiix.OiixNetOps
at java.net.URLClassLoader.findClass(URLClassLoader.java:421)
at java.lang.ClassLoader.loadClass(ClassLoader.java:643)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:346)
at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
... 6 more
I have changed the information that is required in file "additional_agent.rsp" .
Thanks
venkatWhat is the exact version of AIX you're running??
The "problem" boxes we have are running 5.3 TL 04
root@vsv1h202:/root
# oslevel -s
5300-04-CSPOther AIX5.3 boxes that are successfully installed with this agent are running TL 10
root@vtl1h121ps:/root
# oslevel -s
5300-10-04-1015So it might be that there is also a source of the problem
Edit: Also TL 06 fails:
repprd@vsv1h184:/opt/repprd/ora/home/agent/aix/agent (REPPRD)
$ oslevel -s
5300-06-09-0844
repprd@vsv1h184:/opt/repprd/ora/home/agent/aix/agent (REPPRD)
$ ./runInstaller -silent -responseFile /opt/repprd/ora/home/agent/aix/agent/additional_agent.rsp -noconfig
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 150 MB. Actual 921 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6144 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-12-01_02-21-01PM. Please wait ...
$ Exception in thread "main" java.lang.NoClassDefFoundError: oracle.sysman.oii.oiix.OiixNetOps
at oracle.sysman.install.oneclick.EMGCInstallStaticVariables.<clinit>(EMGCInstallStaticVariables.java:119)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:200)
at oracle.sysman.install.oneclick.EMGCInstaller.parseCommandLineArgs(EMGCInstaller.java:506)
at oracle.sysman.install.oneclick.EMGCInstaller.init(EMGCInstaller.java:204)
at oracle.sysman.install.oneclick.EMGCInstaller.main(EMGCInstaller.java:1042)
Caused by: java.lang.ClassNotFoundException: oracle.sysman.oii.oiix.OiixNetOps
at java.net.URLClassLoader.findClass(URLClassLoader.java:421)
at java.lang.ClassLoader.loadClass(ClassLoader.java:643)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:346)
at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
... 6 moreFJFranken
Edited by: fjfranken on 1-dec-2010 5:25 -
How to install and configure OEM agent in VCS cluster
Hi there,
I would like install 11g OEM agent for SUN SPARC OS for two node VCS cluster. OEM repository is residing in another server.
Database (to be configured) is running on one node of VCS cluster, but it will be able to failover other server for any issues.
I have downloaded the agent for sparc and planning to do the silent install.
Could you please give me the steps to configure both nodes of the cluster including the parameters which need to be changed in the response file?
Thanks in advance.
RegardsWe are using OEM agents on VCS clusters. Some options are to 1) fail-over the agent with the database; 2) manually inform OEM that an instance has moved using emcli relocate_targets; 3) use VCS to relocate_targets through a fail-over script. Since our databases don't move much we have been using option 2 but are now testing option 3.
Doug -
Not able to Install OEM Agent 10.2.0.4.0 on Linux Machine
Hi,
I am not able to install OEM Agent 10.2.0.4.0 on Linux Machine with user id ORACLE while installing i am getting "cannot execute binary file"
through Windows i am taking the Server console with X-Manager.
Regards
Raveeshuser8958742 wrote:
Hi,
I am not able to install OEM Agent 10.2.0.4.0 on Linux Machine with user id ORACLE while installing i am getting "cannot execute binary file"
through Windows i am taking the Server console with X-Manager.Which Linux distro? -
Problem with starting OEM-agent on NT (clustered)
We have problem with starting the OEM-agent (9i) on Windows 2000. The Nt-server is clustered.
I have started the OracleAgent by the service screen. Everyting looks ok.
But, from the server where the OEM-console is installed I can't contact the
agent.
I stopped then the agent and started it by typing;
d:\oracle\ora92\bin\agntsrvc.exe
Than i get the error:
StartServiceCtrlDispatcher Failed with err 1063
Anyone an idea?
Thanks.
KlaasIncreate the virtual memory and try to start the service here:
SELECT START > CONTROL PANEL > ADMINISTRATIVE TOOLS > SERVICES
Joel Pérez -
OEM agent deployment : Status=255
Hi,
I am deploying OEM Agent 10.2.0.2.0 on Linux (32-bit). As first installation was failed because of permission issue, I tried to reinstall it. I ended with this error :
Initializing Java Virtual Machine from /tmp/OraInstall2007-02-26_03-45-43PM/jre/1.4.2/bin/java. Please wait...
Completed with Status=255
I tried to delete old installed folder but still same.
Can anyone help in resolving this?
Thanks in adv.I am following the orale documentation, the link is following:
http://download-west.oracle.com/docs/cd/B14099_19/manage.1012/b16228/deploying_the_management_agent.htm#CIHEJIJC
I installed agents on 3 other Linux (64 bit) successfully. But this time it is giving error. This time I have applied OEM plug-in where OEM is installed to monitor Oracle Application server and after that tried to deploy an agent on host. First time the link, setup was successful but at the end it suggested to change the permission os an .xml file. after doing that I end up with the error. It seems some cleanup issue. Pl. give your suggestions...
Thanks -
Hello ,
Is there any command in Oracle restart to register OEM agent to Oracle restart such that the AGENT can be stopped/started as part of the Oracle restart process when ever the server is rebooted.
Thanks
VenkatHi,
Do you mean register the agent in the repository or start the agent when the server it is installed on starts up ?
There's this : http://docs.oracle.com/cd/B19306_01/server.102/b15658/strt_stp.htm#BGBFHGAJ
So have a script read the /etc/oratab, locate the agent home, and run it's startup from that.
Should work, someone probably has a better idea but that one seems reasonable. -
HI,
Can any one help me to understand the use of OEM agent 10g? Is it different from OEM (dbconsole in single instance). Please provide some document link.
Thanks,
GulshanHi;
That means while use Oracle Management console for monitoring all of our databases from centralized OEM console then on each database we have to install >OEM agent. I will check the links and will be back if have more query.Correct
Now the usage of OEM agent is clear to me. Could you please let me know that how OEM agent communicate with OMS and is the repository stores locally of on the server where OMS installed.
If possible, then please provide me the good link.Please see below link
Master Note for 10g Grid Control Agent Process Control (Start, Stop & Status) & Configuration [ID 1082009.1]
Regard
Helios -
I am trying to install the newest version of OEM agent 11 on AIX 5.3. The only options to install are the silent command line but when I do this I just get errors. I want to know if there is a GUI install like 10G had. I followed the install guide and it still fails. I don't have an agent on there this will be a fresh install.
ThanksHi
Recently i have installed Agent11g on my database servers(aix 5.3 / db: 10.2.03) by silent mode.
1)Place AIX_Grid_Control_agent_download_11_1_0_1_0.zip on each server in <location where you want to install> location. Stop the existing 10g agent in /location/agent10g/bin ->> ./emctl stop agent
2) Unzip the downloaded .zip file. After unzipping , change the
aix/response/additional_agent.rsp file. Parameters need to be changed are
SECURITY_UPDATES_VIA_MYORACLESUPPORT=FALSE
DECLINE_SECURITY_UPDATES=TRUE
ORACLE_AGENT_HOME_LOCATION=<location where you want to install>
OMS_HOST=xxxx.com
OMS_PORT=4889
3)under the aix/agent location of the unzipped folder,execute ./runInstaller –silent –responseFile <location of the additional_agent.rsp>
4)It successfully installs 11g agent.
5)From Oracle_HOME/oui/bin --> execute runInstaller to uninstall 10g agent s/w. After that cleanup /tmp/OraInst* files and also delete agent10g folder.
6) Configure the database in grid control server
Hope this will help you.
Thanks
Keven -
I am trying to install oem agent in my HP-Itanium box it terminates with following message. can any one help?
./runInstaller -clone -forceClone -noconfig -silent -invPtrLoc /usr/local/oracle/oraInst.loc ORACLE_HOME=/usr/local/oracle/10.2.0/agent10g ORACLE_HOME_NAME=agentxyz ORACLE_HOSTNAME=xyz.abc.com
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-01-05_01-50-12PM. Please wait ...The Java RunTime Environment was not found at /tmp/OraInstall2009-01-05_01-50-12PM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
Thanks.are u installing 10g agent ? what is the oms version?
Look for the JRE location in the /tmp/ora and compare it with the actual location on the host. You migh have to update the JRE location on the oms_home/oui/oraparam.ini -
OEM DB control has no oem agent, right?
I am new to this 10g OEM things, can I understand that oem agent is installed in each db that will be monitored by GRID control, for individual db, there is DB control that doesn't need agent , right?
Thanks a lot.Hi,
E:\>set oracle_sid=orcl1
E:\>emctl start agent
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
E:\>net helpmsg 2185
The service name is invalid.
EXPLANATION
You tried to start a service that is not configured on this system.
ACTION
Check the spelling of the service name or check the configuration information fo
r the service using the Services option from Server Manager.
E:\>net start oracleserviceorcl1
The OracleServiceORCL1 service is starting...
The OracleServiceORCL1 service was started successfully.
E:\>set oracle_sid=orcl1
E:\>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://alwarid-taj.fakhruddin.local:5501/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleor
cl1 service is starting........................................
The OracleDBConsoleorcl1 service was started successfully.
E:\>emctl status agent
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.2.0
OMS Version : 10.1.0.2.0
Protocol Version : 10.1.0.2.0
Agent Home : C:\oracle\product\10.1.0\Db_1\alwarid-taj.fakhruddin.local_o
rcl1
Agent binaries : C:\oracle\product\10.1.0\Db_1
Agent Process ID : 2960
Agent Process ID : 2960
Agent URL : http://alwarid-taj.fakhruddin.local:1830/emd/main
Started at : 2007-01-13 16:48:27
Started by user : SYSTEM
Last Reload : 2007-01-13 16:48:27
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 160
Size of XML files pending upload(MB) : 3.23
Available disk space on upload filesystem : 59.73%
Agent is Running and Ready
E:\>regards
Taj -
How to configure the old oem agent with new OEM repository
Hi,
I have existing oem setup, with its agents and (OMS & Repository db).
On a different box , I had installed the higher / new version of OMS & Repository db.
Now I want to integrate the oem agents with this new installation.
Can someone suggest how to do it.
Thanks
Naveen.Naveen Sangam wrote:
Now I want to integrate the oem agents with this new installation.
Can someone suggest how to do it.http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm provides tyhe general docs for managing OEM Grid Control. Worth looking at.
Chapter 13 of Oracle® Enterprise Manager Advanced Configuration answers your specific question. -
Oracle Enterprise Management Agent Install on Solaris
Hi,
I am trying to push out an OEM agent to a solaris machine. The URL is https://<servername>:<port number>/em/. I select fresh Install. I select the following options Default, from Management Server location, Version = 10.2.0.2.0. Platform = Linux, Provide Host List = <Node name>, OS credentials <u/n> and <p/w>, click Continue. Then accept licence agreement, and untick Enable Oracle Configuration Manager and untick Enable Proxy.
I get the following error: Application Error: Message: Internal Application Error. Click Home to go to application home page.
Logs:
INFO: BaseServiceHandler.process Action code: 44
INFO: ### SESSION TIMEOUT IS : 2100
INFO: UIBEAN is [UserInputsBean: fixupUserInputBean: null sourceShiphomeChoice: null sourceShiphomeLocation: null remoteHostNamesStr: null clusterInstallChoice: null clusterNodesStr: null clusterName: null oneNode: null isPathShared: false installbaseDir: null username: null passwd: *** secure value not to be logged *** confirmPassword: *** secure value not to be logged *** omsPassword: *** secure value not to be logged *** confirmOmsPassword: *** secure value not to be logged *** additionalParams: null preInstallScript: null postInstallScript: null portValue: null version: null platform: null platformDirName: null nfsAgentLoc: null stateDir: null oldAgentHome: null timeStamp: null action: null isPasswdEncrypted: null params: null preInstSudo: null postInstSudo: null runRootSh: null isDefSH: true isClusterInstall: false remoteHosts: [] origHostsList: [] restHosts: [] oneNodeList: [] clusterNodes: [] passedNodes: [] failedNodes: [] timezone: platformDirName: nullntTempDir: unixTempDir: ]
INFO: BaseServiceHandler.process Action code: 4
INFO: ### SESSION TIMEOUT IS : 2100
INFO: UIBEAN is [UserInputsBean: fixupUserInputBean: null sourceShiphomeChoice: 1 sourceShiphomeLocation: null remoteHostNamesStr: sunora2 clusterInstallChoice: null clusterNodesStr: null clusterName: oneNode: sunora2 isPathShared: false installbaseDir: \opt\oracleHomes\oms10g username: oracle passwd: *** secure value not to be logged *** confirmPassword: *** secure value not to be logged *** omsPassword: *** secure value not to be logged *** confirmOmsPassword: *** secure value not to be logged *** additionalParams: null preInstallScript: postInstallScript: portValue: version: 10.2.0.2.0 platform: 46 platformDirName: linux nfsAgentLoc: null stateDir: null oldAgentHome: null timeStamp: null action: null isPasswdEncrypted: null params: preInstSudo: null postInstSudo: null runRootSh: on isDefSH: true isClusterInstall: false remoteHosts: [[Node: name: sunora2 prereqStatus: null prereqMsg: null installStatus: null installMsg: null startStopStatus: null startStopMsg: null prereqStatusMap: null]] origHostsList: [[Node: name: sunora2 prereqStatus: null prereqMsg: null installStatus: null installMsg: null startStopStatus: null startStopMsg: null prereqStatusMap: null]] restHosts: [] oneNodeList: [[Node: name: sunora2 prereqStatus: null prereqMsg: null installStatus: null installMsg: null startStopStatus: null startStopMsg: null prereqStatusMap: null]] clusterNodes: [] passedNodes: [] failedNodes: [] timezone: platformDirName: linuxntTempDir: unixTempDir: ]
INFO: BaseServiceHandler.process Action code: 48
INFO: File to process: C:\OracleHomes\oms10g\\sysman\agent_download\10.2.0.2.0\agentdeployroot.sh
INFO: Exception : [Message:] null [Exception:] java.lang.NullPointerException
at oracle.sysman.prov.agentpush.services.FormatConversion.executeCmd(FormatConversion.java:300)
at oracle.sysman.prov.agentpush.services.FormatConversion.doConversion(FormatConversion.java:112)
at oracle.sysman.prov.agentpush.services.GenericInstaller.<init>(GenericInstaller.java:179)
at oracle.sysman.prov.agentpush.services.prereq.PrereqCCRServicehandler.processRequest(PrereqCCRServicehandler.java:140)
at oracle.sysman.prov.agentpush.services.BaseServiceHandler.process(BaseServiceHandler.java:172)
at oracle.sysman.prov.agentpush.services.BaseServiceHandler.doPost(BaseServiceHandler.java:110)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
Hope you can help.Hi,
I have downloaded Solaris_GridControl_agent_download_10_2_0_2_0.zip from the Oracle website. I unzipped the file, and copied the solaris folder to C:\OracleHomes\oms10g\sysman\agent_download\10.2.0.2.0\solaris. I tried to install via http again, and got the save error as above.
Thanks for your help,
Maybe you are looking for
-
HP Envy h8.1534 drops wifi after Windows 8.1 upgrade
After upgrading my HP Envy h8-1534 from Windows 8.0 to Windows 8.1, now my computer drops out of my wifi network after about 10 minutes or so abruptly stopping work. I cannot pick up the Wifi again as it will not find the system - I have to reboot m
-
We shoot with DVCpro50 at 24p. A few questions. 1. Is there anytime that there is an advantage, or a time when you have to use field dominance ? Interlaced footage looks like crap. Stills look horrible in an interlaced timeline - why ever use it ? It
-
White boxes around images placed in IDCS2
I am making a catalog....and trying to eliminate white boxes that show up after exporting to PDF format. I have tried so many different things and still cannot eliminate the boxes. Help....frustrated. THX
-
Hi All, Accidentally the display of my Lumia 1520 was broken. I have already gave it to an authorized service, but want to know, what could be the price for the display? I've already searched through the internet, but unfortuantely can't find any rel
-
Having trouble with join query
Hi, I have two tables in my database, class and document. They look like this: Class Class classdescription Document documentid class document.class is a foreign key pointing to class.class. I want to find out how many document there are for each cla