Multiple "Open in Terminal" entries [Solved]

Recently I upgraded from Gnome 3.8 to 3.10. After upgrade, whenever I right click on a folder I see "Open in Terminal" multiple times. Does any one know how to fix it?
https://dl.dropboxusercontent.com/u/286 … enshot.png
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by nik (2013-10-21 22:54:40)

gnome-terminal now includes this, but it might be that you have also the outdated nautilus extension installed. Try uninstalling nautilus-open-terminal.

Similar Messages

[sovled] gnome3.12 locale issue, cannot open gnome-terminal

I update gnome from 3.10 to 3.12, everything works fine except that I cannot open gnome-terminal, the error message shows
(process:2410): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Error constructing proxy for org.gnome.Terminal:/org/gnome/Terminal/Factory0: Error calling StartServiceByName for org.gnome.Terminal: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process org.gnome.Terminal exited with status 1.
The other problem is that I cannot start fcitx(I use it to input chinese) either, there is somethings wrong in my locale, when I type 'locale ' it shows
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=en_US-UTF-8
LC_CTYPE=en_US-UTF-8
LC_NUMERIC="en_US-UTF-8"
LC_TIME="en_US-UTF-8"
LC_COLLATE=C
LC_MONETARY="en_US-UTF-8"
LC_MESSAGES="en_US-UTF-8"
LC_PAPER="en_US-UTF-8"
LC_NAME="en_US-UTF-8"
LC_ADDRESS="en_US-UTF-8"
LC_TELEPHONE="en_US-UTF-8"
LC_MEASUREMENT="en_US-UTF-8"
LC_IDENTIFICATION="en_US-UTF-8"
LC_ALL=
I try to reinstall the glibc or regenerate the locale-gen, but none of them solve the problem, so can anyone help me? thanks.
Last edited by wntyygtwxf (2014-04-11 10:25:48)

I have resolved this issue. The reason I guess is also "locale"
"$localectl" output "System Locale: n/a" and I check the /etc/locale.conf I found this file is lost.
So after I press below command and reboot the machine, gnome-terminal could be started.
# localectl set-locale LANG="en_US.UTF-8"
Thanks all!
gogoer wrote:
I don't meet C locale error message after I exec gnome-terminal. Although that, I post below output.
~ locale -a
C
en_US
en_US.iso88591
en_US.utf8
POSIX
zh_CN
zh_CN.gb18030
zh_CN.gb2312
zh_CN.gbk
zh_CN.utf8
~ localectl
System Locale: n/a
VC Keymap: n/a
X11 Layout: n/a
clfarron4 wrote:@gogoer, did you also get a message about the C locale, or is this an unrelated issue (in which you need to start a new thread)?

Multiple E-Mail id entry in vendor master in ECC6.0

Hi,
I have one issue related to multiple E-mail address entry in ECC6.0. we upgreaded customer system from 4.6c to ecc6.0.
1. In 4.6c, we have the provision to enter multiple E-mail ids continuously with comma seperating each id in the e-mail address field of vendor master where as in ecc6.0 system will through error message"invalid e-mail id" if you try to enter more than one e-mail id in the e-mail address field because ecc6.0 validates e-mail address field where as 4.6c dont validate this field entries.You have to enter one mail id at a time in the e-mail address maintenance popup and keep on adding one by one to maintain more than one id.
2. So, what happens to the old vendor master records that were there in4.6c after upgrade. Do we need to change them to the compatible format with ecc6.0.If so, this is to be done manually one by one vendor master record or isthere a way to change all these records at time automatically.
3. Is there a readily available SAP Note for this?
Your help in this regard is much appreciated as this is an open issue in the upgrade process.
Thanks & Regards
Sundar

I ever experience the same thing when upgarade from 4.7 to ECC6.0.It's because the send mail protocol using SMTP interface (you can ask detail about SMTP with the basis guy).
in the vendor master email address per line, it cannot contain special character like comma, etc.
Maybe you already know , that you can put the mail address in the next line record, but it will take a lot of efford to change all the mail address for vendors.And I'm not sure which one is the best way to handle this.we handle it by bypass the checking for the special character considering the go live situation, so the old email address still remain the same, and can be maintain in the old way.
but in the future you better ask the vendor custodian team to maintain the email address per line (one email per record),then you can revert back the bypass check after that. maybe there's another way or method , but i dont have any clue, maybe others can share their experience also.
also you might face another issue for sending mail, we modify the logic to split the email address per comma.
Below is several notes, maybe it can helps
Note 721723 - Mail receipt: Error with special characters in addresses
Note 1016127 - SMTP mail: Error when addresses have special character

Cannot create new folders on desktop. Cannot drag new items onto desktop. Desktop in Finder opens with Terminal. Not sure if this has anything to do with upgrading to Mavericks but I need help if anyone has ideas. Thank you.

I can no longer create new folders on my desktop. The option to do that is now light gray on the drop down menu and can't be selected.
I cannot drag new items onto desktop any longer either.
The Desktop in Finder opens with Terminal.
Folders and items on Desktop open and work normally.
Not sure if this has anything to do with upgrading to Mavericks but I need help if anyone has ideas.
Thank you.

Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
Sometimes the problem may be solved just by logging out or rebooting. Try that first, if you haven't already done it. Otherwise, continue.
Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder or something else, such as Anything.
If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the Sharing & Permissions section. Then close the Info window and do as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
xattr -d com.apple.FinderInfo Desktop
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You should get a new line ending in a dollar sign (“$”). Quit Terminal.
Relaunch the Finder.
If the problem is now resolved, and if you use iPhoto, continue.
Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.)

Error while opening the receipt entry form in AR module.

Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
forms , we are getting the error message as :
NO_DATA_FOUND
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
Kindly help in resolving.
We have ERP version of 11.5.10.2

Please also see the following docs.
Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
Thanks,
Hussein

I am trying to download Silverlight to use Netflix, however I just get a silverlight_developer.pkg that opens in Terminal and nothing happens.

I have Mac OS X Lion 10.7.2 and I'm having trouble downloading Silverlight to watch Netflix. I've tried several different ways from researching online. It just downloads a silverlight_developer.pkg and when I open it it opens in Terminal and says Silverlight_Developer.pkg-bash-80x24. I'm not a computer genius so I don't knwo what any of this means, but I knwo its not right. Please help!!

This answers the question for Lion users
https://discussions.apple.com/thread/3891253?start=0&tstart=0

Keyboard shortcuts: adding service to open a Terminal window not being saved

Hi
Objective: A shortcut to open a terminal window with the path of the 'in-focus' Finder window (Mavericks).
Solution (that doesn't work): Apple Menu/System Preferences/Keyboard
Select: Shortcuts
Select: Services
Check box for: New Terminal At Folder
Close System Preferences
This approach seems to be advised on quite a few sites. When I do it, the service I add simply doesn't get saved. I go back into the System Preferences and look under the path above and see that the box for New Terminal Åt Folder is unchecked.
Any help in being able to achieve my objective would be greatly appreciated :-)

Those things are saved as part of the workspace. It sounds as if the current workspace file has become corrupt. Close ID, then go to your user profile and you'll find the workspaces folder under \Application Data\Adobe\InDesign\Version 6.0\<language>\Workspaces. Delete the "current" xml file for the workspace and restart ID. The workspace will be restored to the conditions set when it was saved, but hopefully will remember changes again when you close the program.

Multiple Open Document woes

I've been experiencing odd behavior in Motion 2.
When i have multiple projects open simultaneously, the program seems to get confused and often will continue to edit a project other than the foreground one.
For example, i'll have two projects open and i'll switch to the background one using Window>(Whatever the project name is). All the open bins will update to indicate the switch...Media, Layers, Timeline and of course the Canvas.
When i attempt to make an edit to the foreground timeline using keyboard shortcuts, ie. adjusting the in point of the currently selected layer, the change will actually occur on the background project. All of the keyboard shortcuts from that point forward will affect the background project. Switching back to the originally foreground project and bringing the backround project front again does not help.
Worse, if i close the originally foreground project, leaving only the background project open, and attempt to make adjustments, such as to delete a selected layer, Motion will crash and quit.
Additionally, i get odd hangs and crashes frequently. For example, every time i bring the Motion application to the foreground, the program stalls, being unresponsive and displaying the beachball cursor for about 10-20 seconds. I usually have the external video feature routed through my FireWire camcorder, but switching off the External Video preference does not help. This KILLS my workflow.
I've also had various peculiarities, such as keyframes attached to a Layer shifting inexplicably when i shift an elemented nested within that Layer along the timeline. They will not shift in relation to the movement of the sub-layer, but will snap either earlier or later in the timeline, sometimes moving before 0:00:00;00 or offscreen to the right (and past the duration of the Project).
Additionally, my performance is much slower than i would have expected of the Quad with the 7800 and 4.5GB RAM. I don't have quantative results to compare, but simple projects with some text / drop shadows have crawled to 4-5 fps.
My computer is well within the specs demanded by the application. I've installed cleanly with Final Cut Studio 5 Upgrade (using a Final Cut 2 serial number, but FCP 2 was never installed on this system).
The question is really about the multiple open projects issue, but wanted to rant for a moment. I'm really trying to use Motion, but this performance is not helpful.
Any others users experienceing similar behavior? Any Apple gurus want to troubleshoot / provide me with a workaround?
regards,
-robert

@ patrick:
thanks for your insight. i'm not trying to elicit replies, but just wondered if anyone else on the list had had similar experiences.
there is one behavior that i can repeat, and maybe you can try to replicate this behavior:
-open two Motion projects.
-close the first opened project.
-attempt to delete a layer in the remaining open project.
-my system will hesitate for a moment, then Motion will quit abruptly.
crash log
Date/Time: 2006-05-16 10:50:34.630 -0400
OS Version: 10.4.6 (Build 8I127)
Report Version: 4
Command: Motion
Path: /Applications/Motion.app/Contents/MacOS/Motion
Parent: WindowServer [1047]
Version: 2.0.1 (2.0.1)
Build Version: 5
Project Name: Motion
Source Version: 1961000
PID: 1728
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0x77537441
Thread 0 Crashed:
0 libobjc.A.dylib 0x90a465bc class_initialize + 152
1 libobjc.A.dylib 0x90a462fc classlookupMethodAndLoadCache + 132
2 libobjc.A.dylib 0x90a461d4 objc_msgSend + 244
3 Ozone 0x01126638 -[OZDocumentKeyResponder windowWillReturnUndoManager:] + 40
4 com.apple.AppKit 0x937edcc8 -[NSWindow _getUndoManager:] + 188
5 com.apple.AppKit 0x9386d8f0 -[NSWindow _getActiveUndoManager] + 88
6 com.apple.AppKit 0x9385df48 -[NSWindow validateUserInterfaceItem:] + 476
7 com.apple.AppKit 0x9385dd58 -[NSWindow validateMenuItem:] + 28
8 com.apple.AppKit 0x9381a69c -[NSMenu _enableItems] + 476
9 com.apple.AppKit 0x93818654 AppKitMenuEventHandler + 304
10 com.apple.HIToolbox 0x9321c794 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
11 com.apple.HIToolbox 0x9321beec SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
12 com.apple.HIToolbox 0x93222c8c SendEventToEventTarget + 40
13 com.apple.HIToolbox 0x932e765c EnableMenu(MenuData*, OpaqueEventTargetRef*, unsigned short, unsigned char, CheckMenuData*, unsigned long, double) + 288
14 com.apple.HIToolbox 0x932ce55c CheckMenuItemsForKeyEvent(MenuData*, CheckMenuData*, unsigned long, bool*) + 584
15 com.apple.HIToolbox 0x932ce270 Check1MenuForKeyEvent(MenuData*, CheckMenuData*) + 124
16 com.apple.HIToolbox 0x932cdb30 CheckMenusForKeyEvent(MenuData*, CheckMenuData*) + 564
17 com.apple.HIToolbox 0x932cd880 IsMenuKeyEvent(MenuData*, OpaqueEventRef*, unsigned long, MenuData**, unsigned short*) + 564
18 com.apple.HIToolbox 0x932cd604 IsMenuKeyEvent + 140
19 com.apple.AppKit 0x937be930 _NSGetMenuItemForCommandKeyEvent + 300
20 com.apple.AppKit 0x9372291c _NSHandleCarbonMenuEvent + 496
21 com.apple.AppKit 0x93720204 _DPSNextEvent + 1280
22 com.apple.AppKit 0x9371fb48 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
23 com.apple.AppKit 0x9371c08c -[NSApplication run] + 472
24 com.apple.prokit 0x964a2514 NSProApplicationMain + 288
25 com.apple.motion 0x0000ec24 0x1000 + 56356
26 com.apple.motion 0x0000d7e8 0x1000 + 51176
27 dyld 0x8fe01048 dyldstart + 60

Can anyone advise how to close apps on iPad with new iOS? I have multiple open and cannot close them.

Can anyone advise how to close apps with the new iOS? I have multiple open and cannot close them

Double-tap on the Home button. You will see a preview of the app above the actual icon. Slide the preview up to kill it.
Please get the iPhone User Guide (For iOS 7 Software)Sep 19, 2013 - 23 MB.

How to open a terminal window in a path currently visible in the Finder?

I often need to open a terminal window with the current visible folder (a long, deep path) as the working directory.
In Windows I used to have the little "Open command window here..." hack available in the context menu in Explorer.
How can I achieve the same on OS X to avoid tediously typing the path?

open a finder window and navigate to one-level above
this visible folder.
open a terminal window.
drag the folder of interest from the finder window
into the terminal window. now you see the whole path
to that folder has been typed out for you....
so, if you wanted to 'cd' into that folder in
terminal, you'd type cd, then a space, into the
terminal window, then drag that folder in there from
the finder, then hit return.... viola!
If the folder you want is already open, you can drag the icon at the top of the Finder window. You don't have to go one level up.

Viewing multiple open images

Where in CS6 is the "button" for simultaneously viewing multiple open images? There was one in CS5.

Those options are now under Window>Arrange in photoshop cs6.

Contacts with Multiple Backup Assistant + Contacts Entries

I have read others with these same issues. Unfortunately, the responses they are getting have to do with having multiple contacts and joining those contacts. That is not the issue. The issue is that each contact has MULTIPLE Backup Assistant + Contact entries. Meaning, when you you start typing a name to send a text message to, it shows you multiple phone numbers for that person (only, they are all the same phone number). For example, if I start typing Zoe, it will show you contacts that match, it will have Zoe 555-555-5555 listed 6, 7, 8, or more times. But wait, that is the home number, how you keep scrolling them until you get to the mobile number which is also listed 6, 7, 8 or more times. When you go into you contacts and select Zoe, and then go to Edit, you see why - There are 6, 7, 8 or more Backup Assistant + Contacts entries!!! These duplicates are what we are wanting to know how to remove. My daughter has only one phone number, but when I click on the her picture in the favorite contacts widget, it shows 2 and they are both the same. Even the BAL #225 shows up EIGHT times!!!!! When you go online (to the Backup Assistant), they are all listed there too. HELP!!!!!!!

I have no prblem syncing multiple mobile numbers so I don't think it's a universal issue with iOS. The only difference I see is I am using CardDav instead of using the Exchange option. Have you tried it that way? You can urn off contacts in the Exchange account and add the CardDav account separately.

Cheque print out for vendor multiple open line items

HI experts,
I want to print a cheque using f-58 for vendor payment.The problem is when i click the vendor open items(vendor invoice) for a single line item its getting displayed.But when i click for vendor multiple open items(invoices) its not getting displayed in the script out put.Its displaying only with single document number(posting).

thank you..its solved

What is process to close the multiple open delevery in sap

hi i have multiple open delivery and what s process to help i close it.please give me solution to close all open delivery.

Hi,
What is the purpose of doing this?
However, if you complete/close the deliveries you would still see them under document flow of the sales order, which might be misleading for other users for reporting purposes, etc.
Instead, I would go ahead and delete the deliveries if they are never going to be delivered/PGI'ed.
Regards,
Amit

How to display current context while opening a todo entry from main menu

Hi,
I want to display the current context(account,sp details for customer) while opening a todo entry from main menu while searching through To do entry id.
Can any body guide me on this ?
Thanx.
Sunil

I am sorry that I didn't get back to all you guys that took to answering my very promptly. Unfortunately I was not in a position to answer to the suggestions made. as I was away from my computer which had Robohelp on.
Anyway, I did try a couple of scripts mentioned, but didn't really have any success i achieving what I need to do.
I set up a redirect which redirected to the main home page. I tried setting the home page in a main sub-project - so the redirect when from any sub project
Generate
     Master-project.htm (Home Page = Help_Welcome.htm)
merged Projects
SubProject1
            [Home Page = home_redirect.htm (a redirect see below) ]
     SubProject 2
            [Home Page = home_redirect.htm (a redirect see below) ]
     SubProject 3
            [Home Page = home_redirect.htm (a redirect see below) ]
home_redirect.htm (a redirect use by sub-topics)

//]]></script>
This setup works fine as long as I call the master page. The TOC is as I would want. However if I call an ID from my application I get the required page to display and I can get the TOC to show. The problem is that the TOC is from the current sub-project and not the master project as I would want.

Multiple "Open in Terminal" entries [Solved]

Similar Messages

Maybe you are looking for