Multiple Orders with Different reasons on a Single day

Hi,
I am recently learning Device Management of IS-U Electricity. Now I have a problem with meter reading orders generated at the time of periodic meter reading with reason 01 and different system generated orders with reasons like 22, 21 , 16 and 11 which are the orders get created internally based on device replacement and modification.
If the scheduled meter reading date lies on the day or the day before of device replacement or modification, the meter reading for the periodic order is getting prorated based on the meter reading entered at the time of replacement or modification. This is what I dont want.
Is it possible to have multiple orders with different reasons on the same date? Any configuration changes are welcome.
- Arghya

Hi,
You can acheive this using following config changes.
SAP Utilities --> Device Managment -->Meter Reading --> Meter Reading Order -->Order Creation --> Define Automatic Interpolation for Meter Reading Reason.
Uncheck  the 'Auto Interpolation' flag for Meter Reading reason 01.
This will not use the Replacement or Modifiaction read.
Let me know if anything more is reuiqred.
Thanks and Regards,
Ranjit Thakur.

Similar Messages

  • Single invoice for multiple orders with different divisions

    Dear All,
    while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I  tried with 003 and 007 etc..but result is same..what configuration need to be done for getting the single invoice
    Thanks In advance
    Regards
    CNRNAIR

    Hello
    single invoice for multiple orders with "different divisions" invoice is getting split
    FYI - Different Division means different Sales Area.
    So, sales doc (whether sales order, Delivery & Billing) is applicable to EXACTLY one sales area.
    Thus, combining docs with different sales area is practically impossible.
    Provided, you are using common division.
    Hope this assist you,
    Thanks & REgards
    JP

  • Single invoice for multiple orders with different exchange rates

    Hi Gurus,
    We have a situation where the client wants to bill two orders together but both have been created in different months and have different header exchange rates.
    Can someone advise if we can combine these orders / deliveries into one invoice if
    (a) pricing dates & order creation dates are different
    (b) exchange rate of order header differs for both orders
    If standard behaviour is different, can someone advise how it can be manipulated to suit our requirement which is to have 1st exchange rate on those invoice items coming from 1st sales order and 2nd rate for those invoice items coming from 2nd sales order.
    Thanks & Regards,
    Krishna
    SAP SD

    Hi,
    the date will not affect the consolidation of orders to a single invoices provided yur bill to party and all other details are same in both the docuemnts. But due to the exchange rate differences it may split. You can try the same in your test system. If it is splitting the invoice then you need to modify the requirement used in the copying control from order to billing to allow the same.
    Prase

  • Design a single template for multiple reports with different column order

    Hi,
    I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
    For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
    Thanks in advance.

    -As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
    As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
    -I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
    For the customer that want the same ordering of columns you can put those customers under one condition.
        for Example...
              if(?Client in ['clientA','clientA']) then
                        <TableName>.<Field>......
    -What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
    Regards,
    Amrita
    Edited by: Amrita Singh on May 21, 2009 7:54 AM

  • BO xi 3.1 u2013 schedule a template for multiple reports with different column

    Hi,
    I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
    For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
    Thanks!

    Hi,
    The only approach I can think of is to create a template report which uses variables
    For each column you would need to variable
    v_columnAName and v_columnAValue
    v_columnAName would have a if statement in it
    =if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
    v_columnA would have a if statement in it
    =if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
    This would only work when you had a small set of clients.
    This might be more managable if it was done in the universe
    Regards
    Alan

  • Define Multiple Taxes with different Accounts

    Dear Members
    I have defined tax in Oracle R12 . and defined multiple rates. these all tax deducted in a single Tax account. but my requirement is, there should be multiple taxes with different acccounts. when I define multiple taxes the system gives error unable to Calculate the tax. when I only enable one tax it works.
    Current sanario tax rates
    2% Account # 666461
    3% Account # 666461
    3.5% Account # 666461
    Required Sanario
    2% Account # 666461
    3% Account # 666462
    3.5% Account # 666463
    Should be different
    Do you have any Idea How I configure it.

    Hmmm, thought I did that but ran into issues...Will give it a harder look.
    Thank you for your reply, tt2...BTW, I've been reading these forums for awhile now and your replies in other posts have helped me so thanks for all of them, too...

  • How can I edit multiple clips with different frame rates on the same timeline

    how can I edit multiple clips with different frame rates on the same timeline

    You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
    Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
    You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
    The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
    Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
    Have fun.
    x

  • Can I Turn off iMessage in a group text with multiple people with different devices? There's 1 person in the group text that doesn't use iPhone anymore and they can't see any messages that are sent unless we send as regular text individually.

    Is there a way to turn off iMessage for a group text that includes multiple people with different non-apple devices? When a message is sent, only the iPhone users can see the iMessage. Those without them cannot see the texts unless we send individual Text Messages or turn off iMessage completely.

    now I have this and it still doesn't work.
    Section "ServerLayout"
    Identifier "Simple Layout"
    Screen "Screen 1" 0 0
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Touchpad" "SendCoreEvents"
    InputDevice "Keyboard1" "CoreKeyboard"
    Option "OffTime" "1"
    EndSection
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    Option "DontZap" "false"
    EndSection

  • Ability to process several raw files with the same content but with different exposure into the single picture

    Can you add to the Lightroom an ability to process several raw files with the same content but with different exposure into the single picture?
    Base raw files can be given with exposure bracketing during shooting, for example.
    The goal - to get maximum details in darks and lights (if we use the "ligths recovery" or "fill lights" we lose the quality because raw file just have no all required information).
    The similar (but not the same, only the idea) thing - is High Dynamic Range Photography in Adobe Photoshop
    Thank you

    The plugin LR/Enfuse does this already. And of course Photomatix have a plugin available for Lightroom. This essentially amounts to pixel editing, which is beyond the range of Lightroom's metadata editing.

  • Printing multiple PR with different line items in smartform

    Hello all,
    I have an requirement to print multiple PR with different line items on different pages.
    So,suppose two PR are there,PR1 and PR2 with n no of line items,then i should get each PR on different page with its line items.
    Note: One loop processing is already there on line items.
    Best Regards,
    Anurodh

    Hi,
    Fetch all the PRs and its corresponding items into 2 different table. Then Loop at the internal whihc contains the PRs and  call the 2nd internal table for its items and call the FM for smartforms and pass them.
    LOOP AT it_PR.
      fetch all the items into it_PR_item
      Call Function Fnam
      Passign the it_PR_item
    ENDLOOP.
    Regards,
    Aditya

  • How to go about multiple inclination with different data selection in Delta

    We have to copy large amount of data ( more than 42lak of recodes) selectivly from on ODS to other ODS. in delata load ( BW 3.5 enverioment)
    I thought of loading data in slices through delta loading with selection condition.
    step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
    step 2> Take the delta load .. it will take all delta record with same selection
    step 3> Now I want to do Initialization with selection condition as for calyear =2002
    step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
    Here what problem I am facing.. while doing 2nd time initialization it prompt me to delete the last  initialization request form scheduler menu.
    if i delete the last request .. will it take the delta  for previous initialization selection  and new initialization selection. ?
    Please advice how to go about multiple inclination with different data selection in delta loading.
    Looking forward your reply.

    Hi,
    step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
    step 2> Take the delta load .. it will take all delta record with same selection
    step 3> Now I want to do Initialization with selection condition as for calyear =2002
    step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
    You are correct with this scenario normally. The message you mentioned normally comes up when you open a infopackage and don't change the selection first or in case you have overlapping selections with an already done init.
    regards
    Siggi

  • Running the same code multiple times with different paramters automatica​lly

    Hi guys,
    I want to run the same code multiple times with different paramters automatically. Actually, I am doing some sample scans which takes around 2 hours n then I have to be there to change the paramters and run it again. Mostly I do use folowing paramters only
    X_Intial, X_Final, X-StepSize
    Y_Intial, Y_Final, Y-StepSize
       Thanks,
    Dushyant

    All you have to di is put all of the parameters for each run into a cluster array. Surround your main program with a for loop and wire the cluster array through the for loop. A for loop will autoindex an input array so inside the for loop you just have to unbundle the cluster to get the parameters for each run.
    Message Edited by Dennis Knutson on 07-13-2006 07:50 AM
    Attachments:
    Cluster Array.JPG ‏9 KB

  • Multiple profiles with different cache settings

    I want to have multiple profiles with different settings for the cache. I'll call them ProfileOne and ProfileTwo for simplicity's sake. ProfileOne I want to clear its cache on exiting Firefox and on ProfileTwo have it retain its own cache. I have already setup both profiles and configured them accordingly with ProfileOne's privacy settings for Clear History > Cache checked so it clears on exit and ProfileTwo is not set to clear anything on exiting.
    The main issue is that after doing something with ProfileTwo then switching to ProfileOne, upon exiting ProfileOne it also deletes ProfileTwo's cache. I have tried using the profile manager to create the profile in a different location than default to no avail. Is there any way to set it so ProfileOne's cache can still be cleared on exit without affecting ProfileTwo's cache?

    After checking a few different options, it looks like the add-on Better Privacy provides the options I need for LSO management and does separate HTML cookies from Flash cookies nicely and lets me save specific site's LSOs. Thanks for the assistance!

  • Radar chart with multiple KPIs with different scales in dashboard4.0

    Hi Experts,
    How to create a radar chart which is having multiple KPIs with different scales. ?
    Thanks in Advance
    Saidulu

    Hi Sai,
    Customizing the chart is not possible, example the data in you criteria is like the below.
    Take four row based chart to display the row based values, if the columns are having different values. Take column based chart if the difference in row based, hope you got it.
    Use the label in combo box and use the dynamic visiblity to call the chart from the back.
    Hope you got the idea.
    --SumanT

  • Sales order with different Distribution channels

    Hi experts,
    how can i create a sales order with different distribution channels.
    I mean item level 10 = one distribution channel.
    Item level 20 = another distribution channel.
    also in Item level 30 also.... is it posible .?? how can i create ??
    because we have the material in different distribution channel in differen plant with different price ..
    Thanksin Advance,
    Anthyodaya.

    Hi Anthyodaya,
    As already answered by others, the distribution channel is only on header level(VBAK), so it is not possble to have different distribution channels in one sales order.
    Could you please consider using different division?
    Item division could be different than header.
    Go->item->Sales B->Division
    Hope it helps.
    Best regards,
    Smile

Maybe you are looking for