Multiple OS users into the CUCM and CUC?

Does anyone know if it possible to have multiple OS users into the CUCM and CUC?

Hi , 
you can use the command set account username in Call Manager where username is what you want to configure.
regds,
aman

Similar Messages

  • Multiple profiles/users on the same device

    Hi there,
    I know that iOS is a single user environment.
    But, I am currently working in an enterprise environment and I was wondering if it was possible to have several profiles on the same device, maybe using certificates or so?
    Thanks for your help
    Cheers,
    Pierre.

    It would seem that unlike previous iOS devices the iPad and possibly AppleTV call for the ability to enable multiple profiles/users on the same device.
    I would suggest that if this capability is not on the roadmap for iOS by now then there is a least one place where alternatives to the iPad will have a major advantage.
    The thought they I would have to buy multiple iPads one for myself, my wife and my child because of a software constraint is untenable from a ecological standpoint (all these devices end up as landfill) let alone the economic one.
    Also as I use the iPad I see it's potential to become as important computing platform to me as my laptop eventually surpassing it. In this light I can't see how it could remain just a personal device.

  • How can I refer to a value of the textfield1 into the textfield2 and set readonly textfield2, and join the value of various textfields in just one textfield multiline ?

    I am new in acroforms.
    I have a form with 5 pages, in the first page the user fill personal information, the fields are (names, addres, birtdate, ocupation,etc ) all are texboxes, I need to get the same value of every textboxes of the first page into the 2d and 3, 4 and 5 pages, I have created another textboxes in the 2, 3 .. pages with the same names in order to duplicate the value of each one, but if I make some of them readonly, every textboxes in every page are readonly...
    For that reaseon, I tried changin the name of the texboxes of the 2, 3, 4 and 5 pages to names1, names2, names3, names4, and so on for the other fields, I have written some scripts, but no lucky, because I used this line in every new textbox, as the following (for the textbox names1)
    this.getField("names").Value
    Without results, the textboxes apears in blank
    And also, in the last page I need to join some texboxes values in only one multiline textbox
    Please any advice will be welcome..
    Muchas gracias
    Rafsys

    For the information in the second text box to be the same as the first text box (i.e. - on later pages), simply give the fields the same name. The second on could be set to readonly and you could even remove the borders and such so it looked like it was just part of the page. This last trick would get around the need to combine the fields for the display as you mention. Combining the fields would have to be done with JavaScript.

  • HT4061 my iphones lock button is broken, and the screen is not cracked but all the settings are set off to the side and i cant type ion my passcode to get into the phone and i cant get into the phone to reset it

    I have the iphone 5
    my lock button is broken
    my screen is off set and i cannot type in my password to get into the phone and reset the phone
    how or what do i have to do to fix this?
    and im at work so i cant get the serial number to you

    my lock button is broken
    If your lock button is broken, the only solution is to get the phone replaced or repaired.  There is no way to reset the phone without a functioning lock button.
    and im at work so i cant get the serial number to you
    This is a user to user tech support form, not Apple support.  The S/N wouldn't provide any solution regardless.

  • In trying to transfer iWeb pages (not uploaded) to another computer I went into the library and transferred the domain onto the desktop. Disaster! On opening iWeb all previous (uploaded) sites have disappeared. Help!

    In trying to transfer iWeb pages (not uploaded) to another computer I went into the Library and transferred the domain onto the desktop. Disaster! On opening iWeb all previous (uploaded) sites have disappeared. On opening the domain all I can recover is the many component parts, and when unzipped the code. Help! Mike

    Code in a domain file - really?  That is not possible because the domain.sites file does not contain any html or css code at all - the domain file is your iWeb data file and you won't see any code until you publish your website.
    If you can see html code, then you have the wrong file and it is a published version of your site which iWeb can do nothing with - iWeb has no import facility so cannot open any html files.
    Go back and ensure that you have the correct domain.sites files that can be found under your User Library/Application Support/iWeb/domain.sites and if you have Mavericks then you need to go to Go and press the alt key to reveal your hidden User Library, so that you can then get to Application Support and then iWeb and then your domain.sites file.
    You will also need to go and download either DomainCracker or iWebSwitch which allows you to open individual domain files under Mavericks, because from Lion onwards, you cannot open individual domain files.
    Also, it says that you are still using iWeb 08?  If this is so, you'll either need to upgrade to iWeb 09 by going to Amazon and purchasing the iLife 09 or 11 boxed set, both of which contain iWeb 09 or you need to switch to newer software that is actively being supported and developed such as EverWeb (http://www.everwebapp.com).

  • Confused on FIM Service MA. It does not seem to be pulling my AD users into the correct place for the Portal

    I ran a full AD import which gave me about 20K of adds.
    Per the FIM Book I have I set a connector filter to filer out the admin and built in sync accounts
    After running that MA I got 2 adds.
    How do I get my AD users into the portal if FIM service does not import them. Is it a synch? I don't want to synch anything from the FIM DB back into AD, so I am being cautious 

    Hi,
    import just fills the connector space of fim sync.
    connector space is like some kind of cache of the connected data source which FIM lets calculate delta which need then to be synced to the MV
    so after import you need to have a sync rule in place for ad (or MA import attribute flows).
    if objects needs to be created in MV you must project them by either projection criteria or by enable ceate object from external data source in sync rule.
    Objects are in MV then, an will can be exported to fim service ma regarding to the export attribute flows of the fim service ma.
    -Peter
    Peter Stapf - ExpertCircle GmbH - My blog:
    JustIDM.wordpress.com

  • BE 5K CUCM and CUC Mac-Address registering license

    Hi All,
    I am really confused for registering CUC license to which mac-address. (CUCM or CUC)
    I have CUCM be 5k on Server 7828 both CUCM and CUC is installed on same server. For CUCM i got the mac address from show status, but how about registering the license to CUC it should be registered on same CUCM Mac address or CUC has different mac-address.
    I uploaded the licenses in CUCM and need to upload the license in CUC.
    Thank you all in advance.
    Best Regards,
    Mohammed SaberUddin

      MAC address changes should NOT effect the BI 4 server in any way, everything binds to the Server Name & IP Address.
    Regards,
    Ajay

  • My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

    My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
    The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
    I've run out of ideas. Help would be very much appreciated. Thanks.

    have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy....   google...." fcpx time machine problem"  Frist page link 
    http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
           You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
    booya!

  • I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

  • TS4083 Is there a way or a setting my folders in Mail to automatically update across all devices? if I transfer an email to a folder for follow-up on my PC, my folder in Mail on my iPhone doesn't update until I actually go into the folder and update manua

    Is there a way (or a setting) for my individual folders in Mail to automatically update across all devices? For example, if I transfer an email to a folder for follow-up on my PC - say 10th of the following month - the same folder in Mail on my iPhone doesn't update until I actually go into the folder and update manually.  Interestingly though, if I create a new folder on any of my devices they automatically appear on the other devices so it is just the actual contents that I am referring to here.  Appreciate any help or guidance.
    Regards
    Justin

    You can turn mail off in the settings but then you can't use it for anything, including the "test" that you want to perform.
    Settings>Mail, Contacts, Calendars>Account Name>Mail>Off. That totally turns off the mail account.
    As long as mail is turned on and you launch the app, it will look for an download new mail.

  • Multiple disconnected users on the same laptop

    Has any open come across the following requirement? I have a customer that is interested in 'sharing' laptops with multiple offline users with the ability to sync. Can we have multiple disconnected users on the same laptop? If so what would be the options? The challenge is how to manage multiple extracts on one MWC installation. I suspect that 'OOTB', we only support one extract per machine/installation of the MWC. We may be able to support multiples, but it would take some config/customization.

    Please don't post the same question in different forums
    Siebel Remote - Can multiple disconnected users be on the same laptop?
    multiple disconnected users on the same laptop
    Siebel Remote - Can multiple disconnected users be on the same laptop?

  • When I try to update apps on my iPad, it asks me for my mothers password and displays her apple ID.  How do I change it to ask for my apple id and password???  I am signed into the store and iCloud with my apple id.

    When I try to update apps on my iPad, it asks me for my mothers password and displays her apple ID.  How do I change it to ask for my apple id and password???  I am signed into the store and iCloud with my apple id.  I am not signed into ITunes, the store on the ipad, or icloud under her name.  WIERD???

    There is no featured tab in my iTunes store. . . and everywhere it shows me signed in. I had downloaded an app for my mother on HER ipad, and that is the only app I have done for her. It shows up on my phone, and now I cannot update any of my apps. I uninstalled that app on my phone, but when I want to update ones I have installed on my phone with my appleid, she keeps showing up.
    Joyce

  • HT203175 I plugged my iPod into the computer and it says that my iPod is synced with another iTunes library, but it's not. So all my music and apps are gone. What can I do to remind the computer its the right iTunes library and get all my stuff back?

    I plugged my iPod into the computer and it says that my iPod is synced with another iTunes library, but it's not. So all my music and apps are gone. What can I do to remind the computer its the right iTunes library and get all my stuff back?

    Same as you would if you bought a pc; copy everything from your old computer to your new one.  Then you can just sync everything from the new computer, as you did with the old one.

  • In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

    In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

    If you think this is a bug, you can report it here:
    Apple - Mac OS X - Feedback

  • HT1414 Hello, do you know what I can do when my Iphone is blocked with the apple appearing ? I cannot enter into the phone and I don't know what to do ? Thank you

    Hello,
    Do you know what I can do when my Iphone is blocked with the apple appearing ?
    I cannot enter into the phone and I don't know what to do ?
    Thank you for your help
    AMGSO

    Basics from the manual are restart,  reset, and restore.
    Have you tried these?

Maybe you are looking for