Multiple output in MIRO (MR90)

Hi All,
I created a new output type to be used in MIRO.
After I create theinvoice in MIRO, SAP creates an output for each line item.
I can see multiple outputs in MR90.
How can I create the output at header level only? (One output per invoice).
Any ideas?
CD
Edited by: Carlos Durazo on Dec 10, 2009 3:27 PM
Edited by: Carlos Durazo on Dec 13, 2009 11:11 AM

Sridhar,
Output are determined automatically no manually.
I maintained the condition for output medium "A" in customazing.
How can set up the output to be only header level?
CD
Edited by: Carlos Durazo on Dec 14, 2009 2:01 PM

Similar Messages

How to generate multiple output pdf's from one oracle reports

how to generate multiple output pdf's from one oracle reports.
I have a report where I have to generate more than one output files from the same report based on a parameter.
Each output file is for each parameter.
Is this possible in oracle reports, is so how ?

You can better post your question in the reports forum instead of this pl/sql forum.

How do you use multiple outputs on a VSTi like Kontakt or Battery?

how do you use multiple outputs on a VSTi like Kontakt or Battery with Logic Pro 7.1? I've heard someting about using AUX busses, but can anyone please provide an actual clear, step by step basic guide?
I've had Logic 3 months now and just don't know how to do this yet, and have yet to actually find it in the manual!!
thx

http://www.sonikmatter.com/wiki/index.php/Tutorial:MultiChanAudioSetup

Multiple output types issue

Hello,
I configured two output types (Bill of lading & Packing list) for the application V7-transaportation. I am able to get both the outputs. Now, I am able to get a print for BOL and also a print preview. For Packing list I am able to see the screen view(print preview), but when I try to print it directly it gives me an error " output could not be issued" . When I go to Output-> screen it is showing me the output.
I have maintained all the required print parameters and assigned the print profiles to the output types.Is there a problem with my configuration? can't I print two output types simultaneously?

Hi,
Is there a printer defaulted to your output types? You can issue multiple outputs at the same time.
If the output types have been determined in your document, then nothing wrong with the determination process.
If the output can be previewed, nothing wrong with the SAPScript or Smartform.
So maybe something to do with compatibility with the printer chosen.
Phyllis.

Multiple output modules cause render to fail?

Is anybody else having trouble with using multiple output modules in after effects? Let me elaborate: so I'm working on a 3d film, and my worflow is to simply work with the footage side by side in a single comp (we're at HD, so the comp size is 3840x1080). Very often, I need to fire off a quick render to show to the director. Most of the time, I just do the left eye by cropping to that 1920x1080 area in the output module. Other times I need to deliver both eyes, so instead of cropping to 1920x1080, I resize the frame in the output module to 1920x1080. Yea, we lose half of our horizontal resolution, but that's not such a big deal for us when just working on approvals.
Here's the thing: sometimes I like to export multiple variations of this at once (ie one output module for the left eye, one for the right eye, and another for the squished side-by-side left-right video). Whenever I try to output multiple modules with quicktime, it fails. Every time.
When it fails, I get two messages: the first (a warning) says "After Effects warning: last frame was written to one or more output modules, but not all! ( 26 :: 153 )"
The second message (an error) shows up once for each output module: "After Effects error: Rendering error while writing to file "C:\blahh blah blah\whereIputmyfiles\the_render.mov". An output module failed. The file may be damaged or corrupted. (-1610153464)." Once it fails, I cannot output to quicktime AT ALL (multiple output modules, or not) without restarting After Effects.
I tried outputting multiple modules as a PNG sequence... and that worked just fine (if "slow as hell" can ever be called "fine" .... but it worked! )
I tried outputting to the multiple formats I wanted with one output module per render item (rather than having one render item with multiple modules) as quicktime, and that worked just fine (of course... it takes N times as long though... for N number of outputs).
I am on Windows 7 64-bit... running After Effects CC 2014... I never had this trouble back when I was working on the CC version (the not 2014 cc version... that is too confusing...). However, I just went back and tried it with the older version, and it no longer works there either! What gives?
When outputting quicktime, I'm using the h.264 codec.
And before anybody suggests it, no I can't just use AME because that can't resize video (it forces you to keep the aspect ratio through letterboxing) or crop video.

>The most likely culprit is the h.264 Quicktime. It should have never been included as an option. It doesn't even work well in Quicktime Pro or in Final Cut...
I'll come to Apple's (partial) defense here:
Their H.264 codec was written and released at a time when it was difficult to imagine that mainstream computers would have as many CPUs as they do now, so it's somewhat understandable that the severe failures that this codec has with large numbers of threads occurs. Of course, we may all wish that Apple hadn't decided to end development on the QuickTime platform, since this has meant that bugs like this are likely to persist.
That said, this is why we increasingly recommend that people use other H.264 codecs and not use QuickTime for such things. See the H.264 options currently in Adobe Media Encoder.

Multiple output-parameters in a custom component

Is it possible to develop a custom component that returns multiple outputs?
I know that I can define multiple tag <output-parameter> in component.xml, but I don't know how the method of my class can return multiple Objects...
Thanks,
Fabio

You can have multiple getters and setters function that will set or return multiple parameters. Each output parameter can be set to a specific function.
Jasmin

How to map idoc segments to multiple output structures

Dear experts,
On Pi I need to map segments from an Idoc to 2 different outputstructures. My scenario is as follows:
incoming Idoc on PI -> if segment eq 'X' then map to outputstructure '1'; if segment eq 'Y' then map to outputstructure '2'
Idoc structure is as follows:
- 1 header segment
- 1..n detail segments (which I need to map to outputstructure 1)
- 1 summarisation segment (which I need to map to outputstructure 2)
Output needs to be a .txt file.
I would like to use the graphical message mapping on PI, how can I map the Idoc to multiple output structures?
Thanks in advance,
William

Hi
You can do 1:n multimapping
in message mapping in messages tab ..add both the structures in target tab and do the mapping
and in operation mapping add both the message interface on the target side
PLease go through this blog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

How to view multiple output parameters from web services

I have used the Labview tool to create a .NET assembly from a WSDL file.
In the WSDL file the service has been defined to return 2 output parameters.
In Labview, when I invoke the method for this service the first output parameter ends up as the return value of the method. I can create an indicator for this and it gets updated properly when I run the VIS to use the web service.. The indicator is an integer value but recognizes the type defined within the WSDL file.
The second output parameter shows up as an output value. When I right click on it and create an indicator for it I get a .NET icon on the front panel rather than an integer value.
How can I view the value for this second output parameter after running the web service?
Is there a difference in how multiple output parameters handled in newer versions of Labview (I am using verison 7.1)?

scrooge wrote:
You can try this link .
the link is dead... or i dont have access..

Multiple Output formats from Single Source File? (Like Squeeze)

I'd really love to be able to batch process encodes in the following manner:
Drop my source video file into AME CS5, select an MP4 preset, and then have it encode multiple bitrate versions while adding filename extensions [e.g. _High (700 kb/s), _Mid (550 kb/s), _Low (400 kb/s)].
The simple answere is to drop, or duplicate, my input clip 3 times and just select 3 presets I could set up under the Hi, Mid, Lo parameters. But that's exactly what I'm trying to work around. I encode video ads for major web-video sites, and the volume is just manageable to batch process these (drag and drop large quantities, select multiple presets at once, hit Start.) To handle each ad we service would be far too time consuming, even for as simple as AME makes it to duplicate/choose new preset. (In the end, our ads jump onto our FTP via AME's FTP upload option, one of it's smartest features!)
We have quite a bit of encoding resources here at work, but AME has been giving us the most favorable results. Other options, such as Sorenson Squeeze, let you import your source clips, then apply 2 or more presets to them, before encoding the whole batch. Is there any similar functionality in Media Encoder? (Really don't want to move our workflow into Squeeze, with it's inferior MP4 encoding.)
Does anybody have any experience with this sort of high-volume multiple-outputs from individual source files? Any tips with scripts or Apple's "Automator" that could streamline this type of batch processing?

Any update on this ability? We create many in house videos that need to be encoded to 14 different
bitrates for use with Flash Media Server as dynamic http streams.
Currently when I am ready to export a finished sequence, I will pick my first preset and queue it in AME. Then I duplicate that thirteen times, setting each of the new thirteen queued items to their appropriate bitrates. Then I have to change each of the output names to be "filename_bitrate.flv".
This process is much slower when queued in AME than if I exported each individually from PP. I just don't have the time to manually export each version.
I have also started noticing that some of the last few projects won't render beyond the quality of the first queued item. Do I need to render the largest bitrate file first?
Any indication from Adobe on the correct workflow to create multiple bitrate files to be consumed by FMS as dynamic http streams would be appreciated.
The link above is dead. Does anyone have an updated link to the document above?

Multiple Input Multiple Output Fuzzy Logic Controller

I am designing an autotuning PID temperature control system whose PID gains are adjusted using a Multiple Input Multiple Output (MIMO) Fuzzy Controller. I am unsure how to set up specific inputs and how to use specific outputs when there are multiple inputs and outputs. Specifically, my Fuzzy system has two inputs and three outputs.
For the input, I have two 1D arrays of scalars (doubles) which I have used to build an array and concatanated the inputs to the array. How do I configure which values of this array are used as each specific input value to the fuzzy system?
Similarly, for the output, the fuzzy system gives three output values which are used as the PID gains. How do I configure these such that they are in the right order to be used as the PID Gains of the PID VI?

Hi natsmi,
You can find some examples by navigating to:
C:\Program Files (x86)\National Instruments\LabVIEW XXXX\examples\control\fuzzy
Some of them are at least MISO systems and might be helpful to clarify some ideas. You can also find them using the Example Finder from LabVIEW (By going to help on the top menu, and then Find Examples). There you can go to the search tab on the left and type in fuzzy.
Hope this helps.
Regards,
AGJ

One Input File Multiple output files.

Hi,
How to Generate Multiple Output (Target) files by using Single (Source File) Input file in File 2 File Scenario.
Please help me to do this.
With Regards,
Mahesh

Hi,
This is a scenario of 1 : N transporting right.. for this u shud use Multi-mapping then you need to change your logic because Multi-mapping is only be used by ccBPM. so use BPM (integration process) in IR to implement you logic in File to File scenario.
oops.. i missed one thing ..
in simple file to file scenario you can use Message patterns for duplicating the target fields if you getting from single file. You can use this pattern like in target field structure right click on root tag and then click on duplicate subtree, and then you are down.. above is the other way if u want to use bpm.
Hope this will help you,
Regards
Aashish Sinha
PS : reward points if helpful

Multiple output types in MIGO_GI

Hi all,
In my current setting, a message type would be created and printed immediately once the material doc. of goods issue (MIGO_GI) is posted. (Movement type = 261)
Now, it is required to offer some flexibility to users when printing the mat. doc.
Is there any room to create multiple message types automatically and let the user to select one output type to print in MIGO_GI instead of MB90?
Many Thanks!

if you configure multiple output types for mvmt 261, you can set them so that they do not print immediately. But then the user would have to use MB90 to choose the output type.
or,
If the user's profile does not have "Print immediately" set, then they can go to their spool to choose and print.
Or
As mentioned above, create user exit to pop-up a window to choose from upon saving.
Or
If specific users always need to print one output type, and others print another output type, you can configure multiple output types using the "Plant, Storage Location, User Group" option for printer determination. Then, create a profile for each output type. Configure the combination of output type,plant, sloc, user group, and printer. Then, assign the user groups to the appropriate people in their PIDS using PID ND9, value = the user group you defined.

Purchase order generating multiple outputs

Hi All,
We are facing this unusal problem where the PO is generating multiple messages .The most tricky part is its doing only in the morning at 9.30 am when the goods movement file is run.
During this time the PO close goes crazy and it generates multiple outputs per line item.
Please advice.
Regards,
Jinen

Hi,
What does the goods movement file run do ? Based on this you can do the same manually to a PO and check why the output is triggered.
Cheers !

BOM and Production Order: Multiple Inputs to Multiple Outputs

Dear All, My client's industry required BOM and Production Order must be Multiple Inputs to Multiple Outputs. We propose to create customization program to work on it but client do not want any customizations. Any suggestions? SAP B1 8.81 PL13 Thank you very much in advance. Best Regards, Vivian

Hi,
Please advice your requirement with an example. There is possibility to input multiple components to produce single finished product.
Not sure you have checked with SAP help file. If not refer SAP help file and below blog.
http://scn.sap.com/community/business-one/blog/2014/03/01/how-to-implement-production-in-default-sap-business-one
Thanks & Regards,
Nagarajan

Question about creating multiple output files from same query

I have a query like this:
select * from emp;
ename empno deptno
Scott 10001 10
Tiger 10002 10
Hanson 10003 20
Jason 10004 30
I need to create multiple output files in xml format for each dept
example:
emp_dept_10.xml
emp_dept_20.xml
emp_dept_30.xml
each file will have the information for employees in different departmemts.
The reason I need to do this is to avoid executing the same query 200 times for generating the same output for different departments. Please let me know if it is practically possible to do this.
Any input is greatly appreciated.
Thanks a lot!!

You can write a shell script to generate the multiple spools files for the same output. Below script may helps you.
#====================
#!/bin/bash
n=0
while [ $n -le 20 ]
do
n=`expr $n + 1`
sqlplus -s system/manager <<EOF
spool emp_dept_$n.xml
select count(1) from tab;
spool off
EOF
done
#====================

Multiple output in MIRO (MR90)

Similar Messages

Maybe you are looking for