Multiple output products in PPM

I have a business requirement to have multiple output products in one PPM (ex. 100 input component A produce 3 output components - 70 X, 10 Y, and 20 Z). However, in product plan assignment it doesn't allow me to enter one PPM to more than one output product. How do I get this work?

I am still confused by your requirement...
A PPM is nothing more than a BOM/Routing.
Consequently, its product specific.
So what exactly are you trying to accomplish?
Are you trying to minimize master data setup and have the same PPM be used for 3 different products?   Each can utilize the same PPM like a reference routing? 
Or is it 3 products are produced at the same time by the same actions (production order)?
Ken Snyder

Similar Messages

  • BOM and Production Order: Multiple Inputs to Multiple Outputs

    Dear All, My client's industry required BOM and Production Order must be Multiple Inputs to Multiple Outputs. We propose to create customization program to work on it but client do not want any customizations. Any suggestions? SAP B1 8.81 PL13 Thank you very much in advance. Best Regards, Vivian

    Hi,
    Please advice your requirement with an example. There is possibility to input multiple components to produce single finished product.
    Not sure you have checked with SAP help file. If not refer SAP help file and below blog.
    http://scn.sap.com/community/business-one/blog/2014/03/01/how-to-implement-production-in-default-sap-business-one
    Thanks & Regards,
    Nagarajan

  • Multiple output for Production Order

    Can we have multiple output(more than 2 different finished goods part number) for one Production Order?
    Or we can have the different way to handle this case.
    Please advise~
    Thanks.
    Allen

    A production order can be created only for a single product. But if you have multiple items produced from the same process or production line with the same set of activities then you can treat them as co-products or bi-products.
    The product with high value can be the main product for which the production order will be created and the all other outputs can become bi-products or co-products.
    This is one of the way. Hope this helps you.

  • Multiple-Output Planning (MOP) Question

    Dear Gurus,
    I have a requirment to have a functionality similar to that of Multiple Output Planned orders(MOP). My only limitiation is we will not have a SAP SCM(APO) to do that.
    I read a post on this forum IS-Mill: Multiple-Output Planning (MOP)
    Which simply says we cannot have Multiple Output planned orders with out SAP-SCM(APO) system.. I need to create multiple outputs, if having a production order with multiple output is possible, then I am more then happy.
    Any suggestions? All help is highly appreciated
    Thanks again.
    Regards
    VG
    Edited by: Vaibhav Gupta on Oct 21, 2009 7:54 PM

    Hi Vaibhav,
    can you please elaborate on your scenario and Industry you intend to use this functionality ?
    Thanks,
    Sandeep Mondkar
    SCM Manufacturing

  • How to generate multiple output pdf's from one oracle reports

    how to generate multiple output pdf's from one oracle reports.
    I have a report where I have to generate more than one output files from the same report based on a parameter.
    Each output file is for each parameter.
    Is this possible in oracle reports, is so how ?

    You can better post your question in the reports forum instead of this pl/sql forum.

  • How do you use multiple outputs on a VSTi like Kontakt or Battery?

    how do you use multiple outputs on a VSTi like Kontakt or Battery with Logic Pro 7.1? I've heard someting about using AUX busses, but can anyone please provide an actual clear, step by step basic guide?
    I've had Logic 3 months now and just don't know how to do this yet, and have yet to actually find it in the manual!!
    thx

    http://www.sonikmatter.com/wiki/index.php/Tutorial:MultiChanAudioSetup

  • How can i create my BC featured product list in to a slide show for multiple products in one row. i have products aligned in a row i just would like to make it a slide show of the multiple (20) products.

    i have products aligned in a row already using custom css.i just would like to make it a slide show of the multiple (20) products in the one row.
    i am using the featured product module from the development section of business catalyst. i would love to display as many new products as possible in one row of products. so i can just click a arrow left button and scroll through the products.
    holy-shippers.businesscatalyst.com is the site i am mentioning.

    Hello,
    Aside from any custom implementations that may be suggested by any other members, you could also consider using some hero-type slider like those found on our new responsive templates, and have each web-app item contain a product.
    Kind Regards,
    Alex Pavelescu

  • Itunes account for multiple apple products

    Do you have to have an itunes account for multiple apple products, or can you share?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • Multiple Oracle Products on Single Server

    Can we install Multiple Oracle Products for Development and Testing on a Single Server?
    Oracle Database 9i Enterprise Edition.
    Oracle 9i Application Server
    Oracle Applications 11i (Financials GL,HRMS PAYROLL)
    Oracle Discoverer 4.x
    Oracle Internet Developer Suite (Forms Server, Reports Server,
    If yes,
    Do they need to be in separate ORACLE_HOME or same ?
    Also what should be the sequence of Install, i.e. what should be installed first?

    The following products needs to be in their own Oracle Home:
    Oracle Database 9i Enterprise Edition. --> in its own O_H
    Oracle 9i Application Server --> in its own O_H (assuming this is 1.0.2.2 or 9.0.2)
    Oracle Applications 11i (Financials GL,HRMS PAYROLL) --> in its own O_H
    Oracle Discoverer 4.x --> in its own O_H (this is a 806 based product btw)
    Oracle Internet Developer Suite (Forms Server, Reports Server) --> This can either be in its own O_H or in the O_H which has 1.0.2.2 Oracle9i Application Server.

  • Multiple output types issue

    Hello,
    I configured two output types (Bill of lading & Packing list) for the application V7-transaportation. I am able to get both the outputs. Now, I am able to get a print for BOL and also a print preview. For Packing list I am able to see the screen view(print preview), but when I try to print it directly it gives me an error " output could not be issued" . When I go to Output-> screen it is showing me the output.
    I have maintained all the required print parameters and assigned the print profiles to the output types.Is there a problem with my configuration? can't I print two output types simultaneously?

    Hi,
    Is there a printer defaulted to your output types?  You can issue multiple outputs at the same time.
    If the output types have been determined in your document, then nothing wrong with the determination process.
    If the output can be previewed, nothing wrong with the SAPScript or Smartform.
    So maybe something to do with compatibility with the printer chosen.
    Phyllis.

  • Multiple Service Products in Service Order ?

    Hi,
    I have the follg business process:
    A customer sends, say, 1000 Pieces of a Product A for repair. Problem in each Piece may be different - some may require just cleaning, some may require Parts replacement etc., which is known only after carrying out the repair.
    The Customer has fixed Service Charges based on the nature of repair undertaken (level of repair) and Parts consumed.
    I have created Service Products (Mat Type DIEN) for each level of repair. I created Repair Order (Type RAS) and inwarded the 1000 Pieces.
    Should we have Service Order for each Piece i.e., 1000 Service Orders ? Or is it possible to enter multiple Service Products and Qty ?
    Thanks.
    Raj

    Hi Prasanth,
    The level of Repair (Service Product) is determined based on 'Action Code (code to denote the action taken to rectify the problem in the Product)'. It is also imperative that the Technician should be allowed to select only those Components / Parts allowed for the Service Product.
    Action carried out to repair is codified and is known only after repair. Hence segregating qty for each Service Product in the Repair Order itself is not possible here.
    Is there a better approach to handle this business process ?
    Raj

  • Multiple output modules cause render to fail?

    Is anybody else having trouble with using multiple output modules in after effects?  Let me elaborate:  so I'm working on a 3d film, and my worflow is to simply work with the footage side by side in a single comp (we're at HD, so the comp size is 3840x1080).  Very often, I need to fire off a quick render to show to the director.  Most of the time, I just do the left eye by cropping to that 1920x1080 area in the output module.  Other times I need to deliver both eyes, so instead of cropping to 1920x1080, I resize the frame in the output module to 1920x1080.  Yea, we lose half of our horizontal resolution, but that's not such a big deal for us when just working on approvals.
    Here's the thing: sometimes I like to export multiple variations of this at once (ie one output module for the left eye, one for the right eye, and another for the squished side-by-side left-right video).  Whenever I try to output multiple modules with quicktime, it fails.  Every time.
    When it fails, I get two messages: the first (a warning) says "After Effects warning: last frame was written to one or more output modules, but not all! ( 26 :: 153 )"
    The second message (an error) shows up once for each output module: "After Effects error: Rendering error while writing to file "C:\blahh blah blah\whereIputmyfiles\the_render.mov". An output module failed.  The file may be damaged or corrupted. (-1610153464)."  Once it fails, I cannot output to quicktime AT ALL (multiple output modules, or not) without restarting After Effects.
    I tried outputting multiple modules as a PNG sequence... and that worked just fine (if "slow as hell" can ever be called "fine" .... but it worked! )
    I tried outputting to the multiple formats I wanted with one output module per render item (rather than having one render item with multiple modules) as quicktime, and that worked just fine (of course... it takes N times as long though... for N number of outputs).
    I am on Windows 7 64-bit... running After Effects CC 2014... I never had this trouble back when I was working on the CC version (the not 2014 cc version... that is too confusing...).  However, I just went back and tried it with the older version, and it no longer works there either!  What gives?
    When outputting quicktime, I'm using the h.264 codec.
    And before anybody suggests it, no I can't just use AME because that can't resize video (it forces you to keep the aspect ratio through letterboxing) or crop video.

    >The most likely culprit is the h.264 Quicktime. It should have never been included as an option. It doesn't even work well in Quicktime Pro or in Final Cut...
    I'll come to Apple's (partial) defense here:
    Their H.264 codec was written and released at a time when it was difficult to imagine that mainstream computers would have as many CPUs as they do now, so it's somewhat understandable that the severe failures that this codec has with large numbers of threads occurs. Of course, we may all wish that Apple hadn't decided to end development on the QuickTime platform, since this has meant that bugs like this are likely to persist.
    That said, this is why we increasingly recommend that people use other H.264 codecs and not use QuickTime for such things. See the H.264 options currently in Adobe Media Encoder.

  • Multiple output-parameters in a custom component

    Is it possible to develop a custom component that returns multiple outputs?
    I know that I can define multiple tag <output-parameter> in component.xml, but I don't know how the method of my class can return multiple Objects...
    Thanks,
    Fabio

    You can have multiple getters and setters function that will set or return multiple parameters. Each output parameter can be set to a specific function.
    Jasmin

  • How to map idoc segments to multiple output structures

    Dear experts,
    On Pi I need to map segments from an Idoc to 2 different outputstructures. My scenario is as follows:
    incoming Idoc on PI -> if segment eq 'X' then map to outputstructure '1'; if segment eq 'Y' then map to outputstructure '2'
    Idoc structure is as follows:
    - 1 header segment
    - 1..n detail segments (which I need to map to outputstructure 1)
    - 1 summarisation segment (which I need to map to outputstructure 2)
    Output needs to be a .txt file.
    I would like to use the graphical message mapping on PI, how can I map the Idoc to multiple output structures?
    Thanks in advance,
    William

    Hi
    You can do 1:n multimapping
    in message mapping in messages tab ..add both the structures in target tab and do the mapping
    and in operation mapping add both the message interface on the target side
    PLease go through this blog
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

  • How to view multiple output parameters from web services

    I have used the Labview tool to create a .NET assembly from a WSDL file.
    In the WSDL file the service has been defined to return 2 output parameters.
    In Labview, when I invoke the method for this service the first output parameter ends up as the return value of the method.  I can create an indicator for this and it gets updated properly when I run the VIS to use the web service..  The indicator is an integer value but recognizes the type defined within the WSDL file. 
    The second output parameter shows up as an output value.  When I right click on it and create an indicator for it I get a .NET icon on the front panel rather than an integer value. 
    How can I view the value for this second output parameter after running the web service?
    Is there a difference in how multiple output parameters handled in newer versions of Labview (I am using verison 7.1)?

    scrooge wrote:
    You can try this link .
    the link is dead... or i dont have access..

Maybe you are looking for