Multiple outputs from LE9 ( to soundcard cuemix/ outs? )

I know it is possible in Logic PRO 9 but I got confused by the comparison charts saying express cannot do 7.1 mixing..
Differences between the Logic Pro 9 and Logic Express 9 applications
The 3 Logic Pro 9 features that are not found in Logic Express 9 are:
Surround sound mixing (up to 7.1).
afterall Surround 7.1 is just 4 pairs of Stereo outs:)
thanks

This is my point - the currently active channel does not produce sound through its multiple outputs unless Logic is playing.
So, for example, if I am auditioning different drum grooves from RMX through the multiple outputs (for the purpose of putting effects/processors on the outputs in Logic) this only works when Logic is playing.
Or if, in BFD, I have the direct Snare coming out of one output into an aux, and then a direct Kick coming out and output into another aux, I cannot hear them unless Logic is playing - I can only hear the ambient mic's as these are mapped to Outputs 1-2 which are the initial track you set the multiple output AU up on.
If none of this is something you tend to do, I guess it's hard to understand!
Thanks,
Alex.

Similar Messages

How to separate multiple outputs from a TPC

I am using a TCPactive to receive information from a separate program and have that working fine, I just need to know if there is a way to separate the information I receive back to Labview into different text boxes. As of right now, I can call for lets say frequency and amplitude, but they return into the same text box. Is there a way to recognize a call word and put it into a certain output box, or even sequentially separate them, like, if I call them in order every time, to put the first output into one box etc...
Patrick

Hello,
Take a look at the LabVIEW shipping example titled 'Simple Data Client' under the 'Networking' category. This VI should do what you're describing.
Regards,
National Instruments
Applications Engineer

Multiple Output formats from Single Source File? (Like Squeeze)

I'd really love to be able to batch process encodes in the following manner:
Drop my source video file into AME CS5, select an MP4 preset, and then have it encode multiple bitrate versions while adding filename extensions [e.g. _High (700 kb/s), _Mid (550 kb/s), _Low (400 kb/s)].
The simple answere is to drop, or duplicate, my input clip 3 times and just select 3 presets I could set up under the Hi, Mid, Lo parameters. But that's exactly what I'm trying to work around. I encode video ads for major web-video sites, and the volume is just manageable to batch process these (drag and drop large quantities, select multiple presets at once, hit Start.) To handle each ad we service would be far too time consuming, even for as simple as AME makes it to duplicate/choose new preset. (In the end, our ads jump onto our FTP via AME's FTP upload option, one of it's smartest features!)
We have quite a bit of encoding resources here at work, but AME has been giving us the most favorable results. Other options, such as Sorenson Squeeze, let you import your source clips, then apply 2 or more presets to them, before encoding the whole batch. Is there any similar functionality in Media Encoder? (Really don't want to move our workflow into Squeeze, with it's inferior MP4 encoding.)
Does anybody have any experience with this sort of high-volume multiple-outputs from individual source files? Any tips with scripts or Apple's "Automator" that could streamline this type of batch processing?

Any update on this ability? We create many in house videos that need to be encoded to 14 different
bitrates for use with Flash Media Server as dynamic http streams.
Currently when I am ready to export a finished sequence, I will pick my first preset and queue it in AME. Then I duplicate that thirteen times, setting each of the new thirteen queued items to their appropriate bitrates. Then I have to change each of the output names to be "filename_bitrate.flv".
This process is much slower when queued in AME than if I exported each individually from PP. I just don't have the time to manually export each version.
I have also started noticing that some of the last few projects won't render beyond the quality of the first queued item. Do I need to render the largest bitrate file first?
Any indication from Adobe on the correct workflow to create multiple bitrate files to be consumed by FMS as dynamic http streams would be appreciated.
The link above is dead. Does anyone have an updated link to the document above?

Multiple output

After I updatet Logic 8 a few months ago, it seems I cannot use multiple outputs from battery 3. When I´m choosing Battery, I cannont choose more than 2 stereo outputs, or 4 mono. I used to be able to have 16 outputs. Seems it has something to do with my Novation Remote SL-controller, cause it was an options under Native Instruments meny-in Logic when I chose Software Instrument that said "Battery 3 (automap)", but this couldn´t be opened, so I disabeled it in AU-manager. Turns out the AU-component was gone anyway, or was never there.
Any Ideas? I can´t understand anything...

What is the best way to deliver three versions of the same program?<<</div>
Batch encode in Compressor.

Multiple outputs addicitve drums

hi
can anybody walk me through this? i want to use an addictive drums instance with multiple outputs. i have chosen the mult out instrument but don't see any difference. how do i assign an for example the highhat to a different output?
thanks for the help!
w

Hi
On the AD Kit Page, click the arrow or "out" button at the bottom of the fader for the hi-hat. Then in Logic open the mixer and at the bottom of the fader for AD you'll see a plus and a minus button. Press the plus button to open the channels for the individual kit pieces. Incidentally if some channels are unused and you want rid of them, highlight them and click delete on your keyboard.

How to generate multiple output pdf's from one oracle reports

how to generate multiple output pdf's from one oracle reports.
I have a report where I have to generate more than one output files from the same report based on a parameter.
Each output file is for each parameter.
Is this possible in oracle reports, is so how ?

You can better post your question in the reports forum instead of this pl/sql forum.

Can MainStage split the audio outputs from a plug-in to separate busses/out

Take EXS24 or Battery 3 or Kontakt as examples
Only one plug-in instantiated but each drum 'hit' sent to separate outputs from within the plug-in/VI and brought into the mix on Audio/Aux channels for separate processing.
It's easy to set up in ProTools and Logic.
(I don't want to send the output of the channel strip to a bus - I know how to do that)
I've read the manual so many times and can't find any answers.
Does MainStage actually allow this routing ?
Thanks for any help
Lee

As far as I know, the only way to do what you want in MainStage is to set up an EXS24 for each output.
The EXS24 does have an option to load with multiple outputs, but I haven't found a way to make it work on my set up.

How to view multiple output parameters from web services

I have used the Labview tool to create a .NET assembly from a WSDL file.
In the WSDL file the service has been defined to return 2 output parameters.
In Labview, when I invoke the method for this service the first output parameter ends up as the return value of the method. I can create an indicator for this and it gets updated properly when I run the VIS to use the web service.. The indicator is an integer value but recognizes the type defined within the WSDL file.
The second output parameter shows up as an output value. When I right click on it and create an indicator for it I get a .NET icon on the front panel rather than an integer value.
How can I view the value for this second output parameter after running the web service?
Is there a difference in how multiple output parameters handled in newer versions of Labview (I am using verison 7.1)?

scrooge wrote:
You can try this link .
the link is dead... or i dont have access..

Multiple Input and Output from a 6534

Hello
I am after some advice regarding my PCI 6543 digital I/O card and the best way to achieve my desired results. I am programming in Visual C++ with Ni-DAQ 7.
I want to generate a pattern output from one of the ports, Port A, following a software command. This pattern consists of a 10uS pulse on DIOA0, that repeats 200 times with a period of 100uS. I want this DIOA0 output line to initiate an input on ports C and D, possibly through the REQ pin. Consequently the input should acquire 200 times for each call to the pattern output.
I want this to repeat, so the pattern output goes again (as in a FOR loop), and the input occurs again for an as yet undetermined number of times.
I have managed to get something worki
ng for 1 iteration, and I can generate multiple pattern outputs, but the inputs only seem to acquire for the 1st iteration. However, if I step through the code in debug mode I can get the input to work correctly.
Any ideas would be gratefully appreciated.
I am still trying to get some earlier problems with this application solved.
Kind Regards
Jamie

Hi Jamie,
There are a couple different ways you can loop from a buffer. You can either use the onboard memory of the 6534 and loop from there or you can specify as a software configuration that the board loop through the PC memory buffer.
For the onboard looping you need to specify the following:
iStatus = Set_DAQ_Device_Info (1, ND_PATTERN_GENERATION_LOOP_ENABLE, ND_ON);
For software, PC memory looping, the following function specifies this:
iStatus = DIG_DB_Config (iDevice, iGroup, 1, 0, 1);
I attached a couple programs that might be of use. Check this post:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=5065000000080000008BA10000&USEARCHCONTEXT_CATEGORY_0=_31_%24_12_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_31_%24_1
2_&UCATEGORY_S=0
Hope that helps. Have a good day.
Ron

Output from JDBC Adapter mapped to multiple message types

Hi!
I face to a problem with the message mapping.. I do select with the JDBC adapter. This statement selects one field of clob type and it already contains a message - XML document. Depending of the type of this message will be done the message mapping and also the target message type depends on this XML document type. But when u define message mapping, there must be always a target message type... But in the design time, I don't know the exact type! It is dynamic...
And not just with the message, the same situation is also with the target interface...
Any ideas how to solve this?
Thanx, Peter
Message was edited by: Peter Jarsunek

Hi,
I saw the weblog, but I think more important is the 'XI in action' mentioned in this one..
/people/ravikumar.allampallam/blog/2005/06/22/sap-xi-in-action
What I just can not understand from that blog is the step 2/4:
Receive XML file of any format and route to interface specific BPM..
How is it possible? On the output from the 1st BPM must be exact interface defined... How can different messages go out and than into the 2nd BPM?
Can you please write me, how the individual steps could follow after each other to achieve this?
Message was edited by: Peter Jarsunek

Question about creating multiple output files from same query

I have a query like this:
select * from emp;
ename empno deptno
Scott 10001 10
Tiger 10002 10
Hanson 10003 20
Jason 10004 30
I need to create multiple output files in xml format for each dept
example:
emp_dept_10.xml
emp_dept_20.xml
emp_dept_30.xml
each file will have the information for employees in different departmemts.
The reason I need to do this is to avoid executing the same query 200 times for generating the same output for different departments. Please let me know if it is practically possible to do this.
Any input is greatly appreciated.
Thanks a lot!!

You can write a shell script to generate the multiple spools files for the same output. Below script may helps you.
#====================
#!/bin/bash
n=0
while [ $n -le 20 ]
do
n=`expr $n + 1`
sqlplus -s system/manager <<EOF
spool emp_dept_$n.xml
select count(1) from tab;
spool off
EOF
done
#====================

Allow multiple records from this table to be displayed in the form is greyed out.

I'm trying to add a second table to my main data source in an InfoPath 2010 form (database template), but the option to allow multiple records from this table to be displayed in the form is greyed out and I can't select it.
Can someone please tell me how to correct this? I'm guessing that there might have to be something change in MS SQL because on other occasions I've have not encountered this problem when adding a second table.
Any help would be greatly appreciated.
Thanks.

So I've found a work around, but I still don't know why I'm having the problem in the first place.
I've been trying to relate the two tables by using the primary key in the parent table to a view of the child table that also includes primary key in the parent, e.g. the ORDER ID in the order table relating to the ORDER ID in the view of the order detail
table. For whatever reason whenever I did that InfoPath prohibited the data source from returning multiple order details.
My work around is to use views of both the order table and order details table that include the customer ID and to relate the two table in InfoPath using the customer ID. Now I get a data source that allows multiple order detail records. In order to get
just the order details that I want that relate to a particular order, I use a rule that sets the order id in both the order and order details query data sets before executing the query (as opposed to just the order data set).
Hope that's a clear explanation.

How to pass out multiple rows from EJB method?

I need a sample for passing multiple rows from a EJB query method
(using SQLJ). All I found in existing sample code is query on a
single row and pass out as a bean class e.g Emp class with some
getXX() method.
What I'm currently doing is to convert the Iterator to a Vector
and pass the Vector out, which means I've to code a bean class,
use a Vector and later use a Enumeration to read the result. Is
there a simpler way to receive multiple rows from EJB?
In EJB:
while ( empIter.next() ) {
EmpVect.addElement( new Emp( emps.empNo(), emps.eName(),
emps.job(), emps.deptNo()) );
return EmpVect;
In client:
Vector empVect = empEJB.getEmployees(123);
Enumeration employees = empVect.elements();
while ( employees.hasMoreElements() ) {
emp = ( Emp ) employees.nextElement();
System.out.println(" " + emp.getEName());

Hi Ankit,
There is a workarround that requires some excel work.
Here you need to follow the above mentioned steps along with this you need an additional combo box (wont be displayed at runtime, it will fetch the entire data if we select blank for the first combo box).
Now suppose we are using 2 combobox C1 and C2 and our data is from B3 to F6.
Now for C1 (one we are using for selection)
1. select the labels as Sheet1!$B$2:$B$6 (a blank cell is added for all selection)
2. Insertion type as filtered Rows
3. Take source data as Sheet1!$B$2:$F$6 (includeing one blank row)
4. selected Items as none
5. for C2 labels as Sheet1!$A$3:$A$6 source data as Sheet1!$B$3:$F$6 destination as Sheet1!$B$14:$F$17.
6. Selected Item : Sheet1!$B$9 (blank Type dynamic). So it will select the entire table, if nothing is selected.
7. take a Grid component and map it to Sheet1!$H$9:$L$12. use formula as =IF(IF($B$9="",B14,B9)=0,"",IF($B$9="",B14,B9)) on cell H9. Where we take H6 to L12 as final data set. Tis will become the data for next set fo Combo box for further selection.
8. follow the same steps for other combobox selections.
9. control the dynamic visibility of grids on the basis of Destination cell (like B9).
Revert if you need further clarification.
Regards,
Debjit

Multiple output files from single Request

Hi guys
i have one requirment,can we display multiple outputs files (multiple templates) for a single request .
ie i have some banks ,if i run an request ,it will get the details of each bank details ,induadual template .
let me know the solution for this one.
thanks inadvance.

Pl post details of OS, database and EBS versions.
Pl elaborate on your requirements. Assuming you are using XML/BI Publisher, the physical output file will be a single file, but you can use XML/BI Publisher bursting features to separate out different outputs.
How to Implement XML Publisher Bursting in 11.5.10.2? (Doc ID 740428.1)
How to Print Via Bursting Control File (Doc ID 844276.1)
HTH
Srini

When I click on a link, multiple(and by multiple, I mean a ton) blank tabs open. The only way to stop more blank tabs from opening is to close out of firefox completely. Do I have a virus or do I need to change my settings?

If I click on something to open in a new tab or click on someone's email to open Outlook, instead of doing that, a bunch of blank tabs open. I'm fine with a couple blank tabs, but they keep opening. The only way to stop the tabs from opening is to close out of firefox entirely. When I try to reopen firefox, blank tabs again begin to reopen. You can't close out of them fast enough because they keep opening. To stop opening the blank tabs, you must restart firefox a second time.
Is this a virus or something wrong with my firefox settings??

Firefox includes options of how to handle different content types, in your case the mailto links are probably set to "Use Firefox". For details of how to fix this see [[Firefox keeps opening many tabs or windows]], in particular the section "Change the action for a content type".

Multiple outputs from LE9 ( to soundcard cuemix/ outs? )

Similar Messages

Maybe you are looking for