Multiple Pages Navigation

Req: There are 4 pages p1,p2,p3,p4 . User can navigate from p1to p2,p3,p4.
And when the user clicks on cancel of p2,p3,p4 he navigates back to p1.
Now the user can navigate to p3 and p4 from p2.
So there are a lot to navigations possible eg;
p1->p2->p3->p4 and when the user has to be navigate back using previous page link he should navigat the same way p4->p3->p2->and finally to p1
Problem : two level navigation is achieved using transaction values . but when it comes to multi level navigation ,lot many varaibles have to be taken and tracked .
Is there any way to know from where the user navigated from and track it accordingly and navigate.

Not sure what you mean by "tab next to arrows".
<BR>If I understood you correctly, you are wondering about ways to navigate back to the pages you have previously visited using the back navigation button. In Firefox 4, there are 2 ways of doing this. One is to right-click on the Back navigation button. Second is to click but not release the mouse and keep it pressed. In both cases, you will see the list of websites that you have visited previously.

Similar Messages

Part 10 - Creating Multiple Pages | Classroom: Basic Site Layout and Navigation in Dreamweaver | Adobe TV

This lesson covers how to create multiple pages based on the page you have already created earlier. You’ll then learn how to set up the navigation and how to change the content for each page including adding different background graphics by customizing certain CSS properties while still maintaining the shared CSS scheme across the site.
http://adobe.ly/xLdpe4

After this tutorial no 10 my background image didn't change for the rest 3 pages. It stayed the same even though I made a new css rule as shown. I picked tag, this document only, and body as a selector name. Changed the bckgrpund color to black, and than changed the picture as well. I clearly see the new "body" css rule that is above my Paolo css rule in the side bar, but no changes on the pages, I still got the same bckground image for all of them.
Any ideas? Anybody with a similar problem?

Multiple pages that edit a single row

I have searched on tabs and editing a single row using multiple pages and I am confused. I don't want to use java as I am trying to not learn that too...
What I am trying to do sounds like it has been explained before but let me do this again...
I have a record that is too large to fit on a single screen. This makes for a cumbersome entry process. The record is actually broken into four "logical" chunks. Main, Sub1, Sub2 and Sub3.
I have made a list that will allow the record to be selected and call the first logical page... L1.
I have made tabs that show all the pages and allow me to navigate between them quickly.
When I get to L1 all the data is there. I may not change any data on that page and go directly to L2 through L4. However the record is not brought forward onto those pages. So the pages are not related (and I don't have the terminology right I know :) and I could "link" the pages. So here is what I would like the application to do;
1. Display a list and allow the user to select the record to edit.
2. Upon edit go to the first page (tab).. this works
3. Allow the user to select a tab and the page displays the data for the record selected
4. Allow the user to complete the edits and save the record. Upon save the user is returned to the list in step 1.
I was thinking there are several ways to do it... but I was hoping someone could save me a bunch of trial and error (emphasis on the error) ...
1. When navigating off the page save the record, pass the key and re-read the record... ugly huh?
2. Pass all the session data for the record over to the next screen. Is that possible? e.g pxx_field1 = pyy_field1
The the question was does a template with two level tabs keep the record data between tabs?
Any help is greatly appreciated.
Sam

I think this works... kinda
1. I have a "list" that allows the selection of the item to edit.
2. That list opens a page that is the "header" page for a tab set.
3. Each page in the tab set uses the same "ID" to read the record and display the columns. That is how it would work if the list called each individual page.
4. I modified the "slave" tabs to have the "ID" of the "header" page.
This displays the correct data on each page. And it looks like the "apply changes" button saves the changes on the page.
Caveats inlclude (I think as I haven't done exhaustive testing"
1. "apply changes" must be done at each page where there were changes or they would be lost.
2. The first dispaly of the page is blank. Clicking on the tab a second time displays the data. This is true if it is the first time a user selects a record in a session (the "slave" tabs are blank) or if it is a subsequent record update (the "slave" tabs have the last records data.
Thoughts... is this really boring to everyone but me?
Sam

How do i scan multiple pages for one attachment

I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I scan multiple pages into one document using the CanoScan LiDE 200?

How do I scan multiple pages into one document using the CanoScan LiDE 200?
I can't seem to find a way to get them to scan continuously, or a way to stitch them together afterwards.

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to set a template to multiple pages

Hello,
I'm using Oracle Portal 10.1.2.0.2 and I've created a hiearchy of pages and a template with regions for banner, navigation portlet and content area and I want to set up this template to multiple pages. Manually and uncomfortably, I can edit my page and in [Template] tab in [Properties] select my template. But how can I do it for example for a whole page group? Default template for page group doesn't work for me - though I've set up it in page group, in a particular page I still see [Page template]=none with no effect. Is it possible to do it through some sql query? (With specification of region, in which the page will be mapped?)
Thank you for your advice,
tb

Observation:
Pages from one page group can't see templates from another page group. In case of multiple page groups I have to put my templates in [Shared objects]. Unfortunately I didn't find a way (if even exists) how to copy template from one page group to another, especially to shared objects :(

Acrobat 9 Pro: Dragging multiple pages by their thumbnails

Re: Acrobat 9 Pro: Dragging multiple pages by their thumbnails.
In Acrobat 9 Pro for Mac, it used to be that I could click on a single thumbnail page in the Pages Navigation Panel (the thumbnail image of that single page would turn blue), then shift-click on another page 3 pages down (with the first and last thumbnail image, along with the 2 thumbnail images in between turning blue), and then drag all 4 pages (i.e., the first and last pages clicked upon and the two pages in between) to another document.
Now, when I try that, only the last thumbnail image clicked upon turns and remains blue, and only that one page can be dragged.
Note 1: I'm using Acrobat 9.4.5 Pro on a MacBook Pro running OS 10.6.8.
Note 2: I checked for this desired ability on a friend's PC running Acrobat X, and it worked fine.
Note 3: I completely reinstalled Acrobat 9.0 and updated it, and the feature described above still does not work.
So, what happened and how can I get this feature to work again?

This is a known bug with 9.4.5: http://forums.adobe.com/thread/865843?tstart=30
There's a good chance it will be fixed in a quarterly update that should be available within a month or two. In the mean time, you can update to just 9.4.4

JSF 2.0 page navigation vs direct page access

I've been experimenting with JSF for some time now and I still don't understand the page navigation part. I know that in JSF, if you aren't using the redirect option in navigation that the URL is one page behind the page you are on.
I've seen articles where people say you should put your pages in a directory under WEB-INF to protect against directly accessing the page. I don't understand how you can create an application that is multiple pages using that option, because won't you run into the problem of having a form with an action URL of WEB-INF/somepage.xhtml?
I've also read articles that say the way to fix this is to add security-constraints to web.xml that prevent "direct access" to pages, when you want your user to follow a page flow, such as start on page1.xhtml, then page2.xthml, then end on page2.xhtml. If page3.xhtml depends on page2.xhtml, the articles I've read say that a security constraint prevents users from simply requesting page3.xhtml out of sequence.
And what happens if the page you are on encounters an error or the session times out, which page handles that? The one you're on, or the one from before that forwarded you to the page you're on?
In this example, should page2.xhtml and page3.xhtml go in the root of the webapps directory, or in a directory under WEB-INF?
Webapps
index.xhtml
page1.xhtml
page2.xhtml
page3.xhtml
WEB-INF
    faces-config.xml
    web.xml
    page-directory
      page2.xhtml
      page3.xhtml

A session timeout should actually net a view expiry exception.
You do know that JSF 2.0 made page navigation that bit easier by not requiring you to do the XML configuration? There is now a convention built in plus some new components to add GET enabled requests to the JSF lifecycle (notably h:button and h:link). If you have an action method that returns the following:
public String doSomething(){
return "something";
}then JSF will by default want to render a view 'something.xhtml' when you don't define any navigation rules. If you want to make that a redirect you can do this:
public String doSomething(){
return "something?faces-redirect";
}(of course this is a prime target to turn into a utility method on a backing bean base class).
Navigation rules are still necessary when you want to put views in a subdirectory, but at least this way you can greatly simplify general cases. Other than that I can only say: research research research because this material is vital to understand if you want to be productive using the framework; navigation and the 6 JSF lifecycle phases are two items you should put on the top of your list to hammer out until you really get it. A good JSF book will help you immensely there. Balusc's blog is also a good source of deeper understanding:
http://balusc.blogspot.com/
Most of his articles are on JSF 1.2 but most of the information still applies.
Oh and its no surprise that you're a bit confused - this framework is not easy to pick up especially when you don't know any other web frameworks. If you keep running into a wall you should consider checking out something else like Wicket or Play framework. It might just be that JSF simply isn't the tool for the job you're trying to do.

Need help with page navigation

I've got a database where records are retrieved and displayed in a repeating region. I've added page navigation to it because I'm getting enough records in the database that scrolling through them all on a single page is getting to be a very big page. The page navigation works as far as the first page goes. I get the correct records on the first page based on my selection critiera. However, when a result set spans multiple pages, when I hit 'next page', instead of going to the second page based on the search critiera, the records displaying on the second page are the records that would be on the section page if I selected every record in the database.
My search critiera is pretty complex, so I have not found a way to develop it inside of the recordset definition panel in DW, but I have attempted to recreate the page from scratch and I'm getting the same result each time.
Does anyone have a snippet of code to make the pagination work correctly?
This is the code that DW put in there:
maxRows_rs_results = 10;
$pageNum_rs_results = 0;
if (isset($_GET['pageNum_rs_results'])) {
$pageNum_rs_results = $_GET['pageNum_rs_results'];
$startRow_rs_results = $pageNum_rs_results * $maxRows_rs_results;
$queryString_rs_results = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_rs_results") == false &&
        stristr($param, "totalRows_rs_results") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_rs_results = "&" . htmlentities(implode("&", $newParams));
$query_limit_rs_results = sprintf("%s LIMIT %d, %d", $query_rs_results, $startRow_rs_results, $maxRows_rs_results);
$rs_results = mysql_query($query_limit_rs_results, $dqdb) or die(mysql_error());
$row_rs_results = mysql_fetch_assoc($rs_results);
if (isset($_GET['totalRows_rs_results'])) {
$totalRows_rs_results = $_GET['totalRows_rs_results'];
} else {
$all_rs_results = mysql_query($query_rs_results);
$totalRows_rs_results = mysql_num_rows($all_rs_results);
$totalPages_rs_results = ceil($totalRows_rs_results/$maxRows_rs_results)-1;
TIA!

I've put some echo statements into my code to figure out what it is doing and I can see why I'm getting the results I'm getting, but I don't know how to fix it.
Here's a description of my site. A user has a select form where they can select records matching their critiera. There are over 30 attributes that can be selected. None of them can be selected and that results in every record in the database being displayed. Any combination of the attributes can be selected and that results in the set of records that match that criteria.
There is one caveat. One of the attributes has multiple possible values. Any given record will only have one value for that attribute, but the selection critiera may include multiple values of that attribute. So in the middle of the string of "<value = > and <value = >", I have "and (<value = > OR <value = > OR....) and <value=>". You can see the actual select statement I have built in a previous discussion I started.
I'm not a sophisticated php programmer or DW user for that matter, so I don't know how to build an array to capture my record data and then read the array to display the page. It would be simpler if the selection critiera wasn't so complex - I have found several snippets of code that work well with simple select statements, but I have not been able to adjust them to work with this kind of selection possibility.
So what I see happening is that after the first mysql statement correctly retrieves the results set, the code to set the select statement is executed again. But at this second time through, the $_POST values from my form are no longer set to correctly build the select statement. I thought I might save the select statement and use some if/else logic to circumvent this, but all variables seem to be getting reset when the logic goes back up to the top of the code.
I hope I'm describing this clearly enough to generate some helpful responses.
TIA!

Best way to design website with multiple pages

In dreamweaver what are your suggestions to create a full website with multiple pages where each page has a different but similar setup. I'd have a similar theme but I don't want each page to be exactly the same as the home page? I've tried a template but that was a nightmare since some of my pages were different from the original page and i had to mess with it to fix it.I've also made the home page, saved the html file in my website root folder then changed that page into the second page and saved it as another html file. I have thought about using pre-made templates and designs but I kind of want to design from my own creative viewpoint.
your ideas are appreciated, advice welcome.

Templates do make your life much easier. I use the following scheme....
First, I mentally separate the page layout into three sections:
1. Stuff that will not change for the life of the site (i.e., the basic
structural elements)
2. Stuff that *could* change from time to time (e.g., navigation elements,
burst advertisements, section-specific navigation, etc.)
3. Stuff that *will* change from one page to the next
Then I create a template containing all class1 elements. Next I create
server-side include files containing all class 2 elements and place them on
the template as needed. Note - some of the class 2 elements may be
"section-specific elements", and their placement on the template will be
subject to the next item. Finally, I insert editable regions to cover the
class 3 items, INCLUDING the section-specific navigation.
This allows me to just cookie-cut the rest of the site. I estimate that
even for fairly large sites, about 80% of my work goes into planning and
creating this template file.
To handle pages that have substantially different layouts I just change the CSS on those pages, and leave the Template alone.

Page navigation same portal different portlet applications

Hello OTN,
I have a question regarding the best way to perform page navigation using the ActionResponse.sendRedirect method.
There is one Webcenter Portal, and in it are multiple pages. Each page has portlets from different 286 PortletProducer applications.
I can copy the url out of the browser and remove the params, and use that string in my controller to redirect me successfully to the home page of the portal.
However that URL does not reference a non-home page, i.e. one not hooked up to Root.
I tried constructing the page url by appending the path from pages.xml to the portal context, but got no love from that either.
If i want to redirect to a different page, what is the best way to specify the page so I can use the sendRedirect method?
Thanks,
PowerUser 862605

if you use sendRedirect method ,then make sure the following conditions are satisfied.
This method only accepts an absolute URL (e.g. http://my.co/myportal/mywebap/myfolder/myresource.gif) or a full path URI (e.g. /myportal/mywebap/myfolder/myresource.gif). If required, the portlet container may encode the given URL before the redirection is issued to the client.
some good examples are her -http://www.javadocexamples.com/javax/portlet/ActionResponse/sendRedirect%28String%20location%29.html
Personally , I haven't checked it .so try this and see what's the results is .

Transitions for page navigation windows phone 8 VS3013

Hi. I installed the WPtoolkit and the
Microsoft.Phone.Controls.Toolkit is under the references in References folder and I still can't use thenamespace
Microsoft.Phone.Controls.Toolkit.dll in code-behind file? How do I add transition effects between page navigation? Thank you in advance.
I also tried to add this line in the XAML:
xmlns:toolkit="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone.Controls.Toolkit"

Here's an example.
Open a new project and select the Windows Phone Silverlight Databound App template (using this as an example because it has multiple pages already set up).
Install WPToolkit using Nuget.
In App.xaml.cs, search for this line:
RootFrame = new PhoneApplicationFrame();
and replace it with this:
RootFrame = new TransitionFrame();
In both MainPage.xaml and DetailsPage.xaml, add the xmlns:
xmlns:toolkit="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone.Controls.Toolkit"
and add this xaml before the LayoutRoot:
<toolkit:TransitionService.NavigationInTransition>
<toolkit:NavigationInTransition>
<toolkit:NavigationInTransition.Backward>
<toolkit:TurnstileTransition Mode="BackwardIn" />
</toolkit:NavigationInTransition.Backward>
<toolkit:NavigationInTransition.Forward>
<toolkit:TurnstileTransition Mode="ForwardIn" />
</toolkit:NavigationInTransition.Forward>
</toolkit:NavigationInTransition>
</toolkit:TransitionService.NavigationInTransition>
<toolkit:TransitionService.NavigationOutTransition>
<toolkit:NavigationOutTransition>
<toolkit:NavigationOutTransition.Backward>
<toolkit:TurnstileTransition Mode="BackwardOut" />
</toolkit:NavigationOutTransition.Backward>
<toolkit:NavigationOutTransition.Forward>
<toolkit:TurnstileTransition Mode="ForwardOut" />
</toolkit:NavigationOutTransition.Forward>
</toolkit:NavigationOutTransition>
</toolkit:TransitionService.NavigationOutTransition>
/li>

I have an MX 510 printer. I want to scan multiple pages. Cannot use doc feed as scanning booklet.

I have an MX 510 printer. I want to scan multiple pages. Cannot use doc feed as scanning booklet. How do I do this?

use the MP Navigator application
When it opens choose PDF and then select Multiple Pages.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Enabling 'An Email Message' hyperlink opening multiple pages?

Hi All ---
I'm trying to enable 'An Email Message' hyperlink for a png on one of my pages. I've tried appliying this to a few different things - jpegs or text - but when clicked the link opens up multiple pages in an outside browser (Safari /Firefox) until it crashes.
huh?
the navigating options 'open in new window' & 'to one of my pages' both work fine
thnx loads in adv. any tips or help --
cheers,
John.

At this time, I don't understand the behavior.
May you send the file as an attachment, I will try to discover what is odd.
Click my blue name to get my address.
Yvan KOENIG (from FRANCE mardi 14 juillet 2009 11:46:00)

I am trying to scan multiple pages from my scanner using a Mac and don't know how to

Hi there,
I am trying to scan multiple pages using HP Deskjet 3070A (Print Scan Copy) and it is all wireless using a Mac OSX 10.6 Snow Leopard and it won't let me. And I am trying to send this document via email.
Can you offer advice as to how I can do this.
Much appreciated.
This question was solved.
View Solution.

Hi,
Please refer manual for the printer and page 26 from link below.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Multiple Pages Navigation

Similar Messages

Maybe you are looking for