Multiple pans/zooms on one slide?

Any way to do multiple KB pans/zooms on one slide?
In iMovie, you can duplicate a segment, and reverse it. If I could do that to a slide with KB, then reverse it, and change the "end", this would work for me.
But when I "Duplicate" a slide with KB, the KB is lost, and I can't see how to reverse the KB.
I know I could do this manually, but to get the "end" of on slide to match exactly the "start" of the next seems difficult.
Any thoughts?
Thanks,
James

Hi Mister C
I'm curious about something. You are using an action I've seen suggested elsewhere here. I use a similar approach but found that I had issues with the approach you are showing.
My approach is to use the rdcmndGotoFrame rdinfoCurrentFrame - 5
Personally, I've seen it where the way you point out failed in many cases for me. By "backing up" the playhead five frames or so, things then worked as the playhead drifted back to the pause point.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

Multiple text captions on one slide?

Hi, i have question about multiple text captions on one slide of my project. I want o change content of text caption by clicking on different buttons on the slide.
There are 4 buttons on slide and in the middle of the slide there is text caption. Is it possible to change content of the caption by clicking the button or is there some way to do it different (hide or show different captions etc..)?
thx martin

Hi Mister C
I'm curious about something. You are using an action I've seen suggested elsewhere here. I use a similar approach but found that I had issues with the approach you are showing.
My approach is to use the rdcmndGotoFrame rdinfoCurrentFrame - 5
Personally, I've seen it where the way you point out failed in many cases for me. By "backing up" the playhead five frames or so, things then worked as the playhead drifted back to the pause point.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Multiple Quiz Questions on one slide

Hello Captivators,
I am using Captivate 3. It seems a waste of space to have one
quiz question per slide. Is there a way to have more than one
question per slide?
Thanks,
eholz1

Hi eholz1
Sorry, but there is no current way to combine multiple
questions on a single slide. If you would like to suggest this
feature to be considered in a future release, you may do so by
clicking
here and completing the form you will find there.
Cheers... Rick

Multiple Question types on one slide

I need to create a quiz slide with different types of questions on one slide. Basically I need a multiple choice question and a couple of short answer questions to do an evaluation of the course and ask for feedback. How do I do this?
Thanks
Terri

Hello,
If you want to create custom slides with standard objects and/or widgets, have a look at the articles I posted about this subject on my blog. Here is one link:
Widgets and custom questions - source list
Recently I wrote some about reporting that kind of questions
Lilybiri

Multiple text boxes on one slide

Hi all-
I want the user to enter their First Name, Last Name, then User ID on one slide.
I am using 3 text boxes.
1. I want the cursor to be positioned in the First Name text box when the user gets to that slide.
2 I am not validating their information but don't want them to get past a box if they don't enter anything.
How can I accomplish #1 and #2?
Thank you as always.
Erika

Hi gtmatt22
Well, in case you are interested, I may have discovered a way
to accomplish what you initially asked without the use of a
question slide.
Add your text entry boxes. Then stagger them so the second
doesn't appear until the first has been successfully answered.
Configure the start point just beyond the pause point. Repeat the
process for each text box.
Hopefully this helps... Rick

Multiple mp4 files in one Slide

When I place two mp4 files in one slide, neither one plays. Each play fine in a separate slide, but grouped together they do not.
Any idea why?

Hi Craig!
I'm good and I hope you and your family are fine too. I am happy to hear you back on MacBreak Tech, I always enjoyed the discussion and missed the podcast when it was down.
The situation are two small (1-2 meg)mp4 files, and we're placing them one on top of the slide and one below it, sort of a comparison view. They should both play at the same time on the slide, and all we're getting is the background color of the slide showing. When we played them on the slide separately, no problems.
It is the oddest thing I ever saw. These files were originally avi files that I converted back to mp4 format with h.264 so I could more easily work with them in Keynote and then eventually, FCP. If you have any wild ideas, I'm all ears.
Thank you and nice to hear from you again.

Multiple Audio files on one slide

Hello,
I want to have multiple audio files in a table on a single slide.
Also, these audio files should play when I click on that particular file (which will be placed in a cell in the table)
How do I do this?
I see an option with "Play sound on click" but it plays when I click anywhere.
This doesn't give me the ability to place multiple files and thus be able to play them as needed.
Thanks.

nope, Keynote doesn't have "triggers" though I figure this has to be on Apple's radar as it's been brought up every time a new version comes out.
I suppose one work around would be to make a slide for each sound, and have the sound play when you go to that slide. Then make your table a series of buttons that go to each "sound slide" (you can make link buttons, just not triggers). It would give you the effect of clicking to play the sound, it's just that instead, Keynote would be jumping to a slide and playing a sound. All the slides would LOOK the same, and you wouldn't use transitions between them. The effect would get you what you want, it just takes longer to build.

How can I get multiple likert questions on one slide?

Hi,
I have 9 questions I want to ask in a Likert survey in Captivate 7.
When I insert a Likert question slide, it defaults to only show 1 question per slide.
I want the learner to see all 9 questions on 1 slide.
Can anyone tell me how to do this?
thanks!

In Captivate 7, if you select the Likert scale and go to the Quiz Properties tab, under the General tab you can change the Answers from 1 to a higher number and get a nice list of items to go with your disagree to agree list.
That's my relevant to the thread comment and here for posterity to anyone looking for the answer to it.
But I came here because I want a total from the Likert and it doesn't exist during the lesson, since it doesn't report scoring back to the student.
I've been reading your older blogs. Lilibiri, great stuff that makes me wish there were a simpler way in the newer version, but I can't find it. Basically we are creating a question series that becomes a self evaluation checklist, and want to assign the point range to the answers, 1 for disagree up to 5 for Agree, adding up "positive traits".
Was originally thinking of using multiple choice set as a pretest but there's a bunch of variables and actions to write for that, and I saw your post about a simple text entry, which looks more manageable and I'll have to figure that out.
But the simple clean familiar look of the Likert ... I wish there were an easy way to just get those numbers in a total, now that it's in version 7 even. So annoying that it pushes my procrastination button and I don't even want to work on the rest of my lesson!

Multiple click boxes on one slide; Pausing project

I'm using Captivate 5.5.
I have four click boxes on a slide. Three click boxes upon clicking show an image and then show a success caption. The forth click box shows a success caption but also is set to "pause project until user clicks."
Unfortunately, if any of the three click boxes are clicked it advances the playhead even though the forth click box was never clicked. How can I pause the project until only the forth click box is activated no matter if the other three click boxes have been previously clicked?

Hello,
Default behavior of click boxes is to trigger the simple action that is assigned to it AND at the same time to release the play head. Even if those 3 click boxes had a pause, at the same moment as the fourth, this would have happened. If you put the pausing point of the fourth click box later than the pausing of the first three, it will work fine if the user clicks only one out of 3 click boxes.
If you replace the simple action by a (eventually one-line) advanced standard action, the play head is not released:
http://blog.lilybiri.com/why-choose-standard-over-simple-action
http://www.youtube.com/watch?v=M3nKi-DB6Fw
Lilybiri

Multiple failure captions on one slide...?

Can anyone offer any advice with this please?
I use Captivate 3 to produce training for software applications. In the past I have tried to limit the amount of buttons and/or click boxes that have failure captions to a maximum of one or two per slide. This is purely to prevent the problem where a previous failure caption appears when an incorrect option is chosen later on in the same slide, even where the click box/button is clearly separated from the next one on the time line and the 'focus' is changed as well. This removed the problem but incresed the file sizes
So, in trying to keep the filesize of my software application movies down I have started building cp files where I have fewer slides with graphic elements appearing and disappearing throughout....the difference in the published files is huge but I now have the problem back where I may have several failure captions corresponding to several click boxes/buttons on the same slide. The 'bad behaviour' is that, again, the first failure caption will appear all the way through any incorrect choices made on any of the remaining click boxes/buttons on that slide.
I have separated all the buttons etc. from each other on the time line but the problem persists. Can I really only have one or two click boxes/buttons with a failure caption on each slide or am I missing something?

Hi there
Have you examined the properties for the objects and enabled the pause for the failures?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Multiple rollover slidelets on one slide

I have musltiple rollover slidelets on one page and as soon
as one finishes I want the user to be able to rollover the next one
and have it start. On the slide timing, it looks like it is set up
right but in execution there is a long delay before it starts. Any
suggestions?
Thank you!

Hi Larry
Good job on reducing the file size.
I think we got the issue sorted. Here's what the deal was.
Rita had four Rollover Slidelets on slide three. Her desire was for
the first to become available for rolling over just after the audio
narration completed. So she timed the first slidelet at about five
seconds. She wanted the next to become available for rolling over
just after the user finished listening to the audio narration
contained inside the first slidelet. The third shortly after the
second finished and the last shortly after the third finished.
Click here to
see a screen capture of the Timeline before changes
In practice, she was experiencing longer than desired delays
before the next rollover area became available. So the desire was
to shorten the time.
Click here to
see a screen capture of the Timeline after changes
What was happening was that when a slidelet was playing, the
main timeline stops playback. This means that after the first
slidelet completes, seven and a half seconds must elapse before the
next slidelet becomes available. After that second slidelet
completes play, another 11 seconds must pass in order for the last
to become available. So by configuring the slidelets closer
together as in the after example, the issue was apparently solved.
Cheers all... Rick

Is Copy Paste Pans & Zooms Possible in Photoshop Elements Slide Show Editor Slideshow?

In the Photoshop Elements Slide Show Editor, someone wants to create a unique pan and zoom effect for one photo and be able to apply it the the rest of the photos in the Filmstrip without having to do that on an individual photo basis.
In the Slide Show Editor, Edit Menu/Apply Pan & Zoom to All Slides or Apply Pan & Zoom to Selected Slide(s) does not get the job done. Instead it looks like it just applies the default Photoshop Elements pan and zoom. I have investigated several routes to the goal unsuccesful and have concluded that Photoshop Elements Slide Show Editor offers no such copy paste pans & zoom feature.
I have detailed how to add more than one pan & zoom per slide, how to get the pan & zoom copy/paste job done in Premiere Elements, either doing all the pan & zoom in Premiere Elements or creating the pan & zoom in Photoshop Elements for one slide, using Send to Premiere Elements, Break Apart Adobe Photoshop Elements Slideshow, copy/paste of the transferred pan & zoom. Believe it or not, that does work. I know that there will be skeptics who feel that the pan & zoom timing would be distored, but....This person does not have or want Premiere Elements in the equation. So, I am looking for a way out for her.
I am posting the question here for someone to confirm my conclusion or offer a way that has escaped me. If someone has found a way, he/she will be fully created for the contribution and thanked.
ATR

Copy and past funtionaliy is not available in pan & zoom feature. Please do a feature request.

How can I create a collage of multiple photos on one slide using Premiere Elements 4.0?

Hi all!
I recently bought Adobe Premiere Elements 4.0. I'm having trouble with something and was wondering if anyone could offer any assistance?
I'm creating a slideshow using photos and videos, but with my photos I want to be able to create a few collages, by using multiple photos on the one slide. Usually you just have one photo on the screen and it moves on to the next one, but I'd like to have eg. the occassional slide that I can have say 4 photos overlapping onto each other, like a photo collage. Does this make sense and does anyone know how I can do this? I've searched the instructions and can't figure it out and the Adobe support line said they couldn't tell me but pointed me to this forum...
Any help would be much appreciated!
Thanks :)

There are basically two ways, with a variation, to do this.
First, you could size the still images in Photoshop, or other, for the size needed on your Project's screen and then use Motion to position the image where you want it. The variation on this would be to use Motion>Scale to size the image and then Motion to place it where you wanted. You would stack the images on various Video Tracks as necessary.
The other way would be to place the images on the correct Video Track and use the Track Matte to limit the view of that image. You will probably use one of the two variations from the first way (Motion>Scale and/or Motion) to get the image where you want it, but then the Track Matte (building in Titler is easy) to eliminate any extraneous image data.
Hunt

Multiple Text Entry Boxes on One Slide

I am developing training and assesment captivates for a software application. On certain forms in the application, I want to have the student enter text in multiple text boxes on one slide. Cannot figure out how to set the On Success options to validate the entry in one box and then move to the next box on the same slide. For example, in the attached shot, I want them to enter into Term1 Days, Term2 Days and Term 3 Days on the same slide. Have tried the Enable option, but cannot tweak that to work. Any ideas? Thank You

Hi there
I think to do this properly you will have to simply stage the Text Entry Boxes. Perhaps on different slides.
The user will then interact with one at a time.
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Customizing pan and zoom (Ken Burns) slide by slide -- help

Here's where I am:
I've imported a bunch of photos into iMovie and they are happily sitting in the Photos Pane.
Here's what I want to do:
Photo-by-photo I want to customize the Ken Burns effect to change the zoom and panning behavior.
Here's what I am doing:
I select the first photo and change the zoom and pan behavior to my liking...then go to the next photo and do the same, and so on and so on...
Here's what's happening:
With each subsequent photo, the previous pan and zoom settings are all changed to be identical to the changes I most recently made (i.e. all my previous changes are "deleted" and now all the photos have the exact same settings).
What am I doing wrong? Thanks a bunch!

Sorry to make this such a messy thread! (I couldnt' find any way to edit my previous post, so I am creating a new one summarizing where I am and the problems I am experiencing). I'm about ready to throw my Mac through the
window...heeeeeeelllpppppp meee.....sssoomebodyyyyy!
So, trying to summarize my issues:
I'm having a rash of problems using iMovie.
Here is what I am trying to do:
Using photos from iPhoto Albums, I wish to create a movie/slideshow with pan/zoom, transitions, and music ultimately for import into iDVD for burning on DVDs to be views on televisions and/or computers.
Here's what I am doing:
1. In the Photo Pan I have the photos I wish to use from an album.
2. I select one photo at a time, adjusting the pan/zoom behavior and duration one at a time (I realize you dont have to do each separately, but I like to customize this behavior slide-by-slide).
3. Click on Update after each, thereby landing it in the timeline.
4. I then selected ALL in the timeline and chose a transition (cross fade) to be applied to all.
5. Now I've gone back to change the pan/zoom and the length on selected slides.
6. [This part's a little hard to describe since I think more than one thing is going on at once...] When I change the length of a slide, it recompiles the transitions on either side of it (which I understand) and when it's done, the slide durations of the slides on either side of it have been markedly shortened (like from 4 seconds down to less than 1 second). I'll then get an error message saying the transiton cant be applied to very short clips (which I understand)...
7. So, I'll then go to one of the recently-shortened clips to lengthen it's duration...and then the process starts over again, with the clip before it getting really short.
8. The same thing seems to happen if I delete the cross-fade transition and insert a different one...slide durations keeps changing radically.
In addition to solving the problem above, here's a couple more questions I have:
1. What part of the process do you set the length of the clips? (I was thining of 4 seconds a piece, but that wasn't long enough to accomodate the 1 second cross fade)
2. What order should I apply the various settings? (pan/zoom, duration, transitions...)
3. Later, assuming everything is okay with the timing and transitions and KB, if i want to change one transition between two photos, I tried deleting the cross-fade, then adding a new transtion. But in the process of the timing of the two photos changed preventing the new transition from fitting...). How do I go about this?
Clearly, I'm missing something here. This is so unintuitave...driving me nuts.
Thanks a ton for any help you can provide.

Multiple pans/zooms on one slide?

Similar Messages

Maybe you are looking for