Multiple Partners with Same partner Functions in LEAD

HI Experts,
we have maintained in partner determination procedure -> partner functions in procdure -Channel Partner-> Maximum as 1 . it means that system willl allow only one channel partner to be determined or only one channel partner will be allowed in a txn.
However when we create a Lead, system is allowing to add multiple channel partners under Parties involved AB with error message which is fine, but it allows the user to SAVE it which we dont wont .
any thoughts.
thanks
Smita

Dear Raju,
You may have different Bill-to-Parties and Payers, in a single Sales Order, at Item level (for different Line-Items);
BUT
You may not have multiple Bill-to-Parties and Payers, for a single line-item, for a Particular Sales Order Line-Item.
Best Regards,
Amit,
Note: Haven't experienced, but might be achieved the requirement with Customization (not sure).

Similar Messages

Partner Function Queries Multiple Partners for Single Partner function SO

Hi Experts
Is it possible to enter multiple partners for Single partner Function in SALES ORDER
For Ex : We have created Z1 as a Partner function for Sales Executives : and Sales Executive 1 , Sales Executive 2 Sales xecutive 3 etc as sales Partners for Z1 partner Function .
Now Is it possibe to enter for Z1 -
sales Exeutive 1
Z1----
Sales executive 2
Z1----
Sales Executive 3............
I would be greatful if you repond the same at the earliest
Thanks
Rashmi K

Hi Rashmi,
The requested function is possible.
In the customizing of partner function, you could set the field Unique as blank. Then you could enter multiple partners for same partner function.
IMG->SD->Basic functions->Parnter determination->Partner Functions
Hope it helps.
Thanks and best regards,
Smile

Output type maintained for same partner function.

Hi Gurus,
Can we maintain outupt type for different transmission medium like print output, EDI and special function with in same partner function ? Please explain also?
Thanks in advance.
Regards
Hemat ghiya
Edited by: Hemant ghiya on Oct 5, 2011 1:28 PM

Hi Rags,
Thanks for your quick reply but i am getting problem at the time of determination . Once i have determined for one medium and then i will determine for another medium with same partner function then it is giving error like this partner funcition alerady used.
So i am not able to determined for the another transmission medium after determining for one medium.
Can you give your valueable suggestion.
Thanks in advance.
Regards
Hemant ghiya

Can the same partner function be entered in the sales order more than once.

Hi
I know that as per standard same partner function cannot be entered more than once in Sales order.
If somebody has tried ways to do this please share.
THanks
Alags

Yes. You can have multiple Ship to Party, Bill to Parrty & Payer in Sales Order. But Sold to Party will have to Unique & single.
This functionality of having multilpe Partners is widely used & just follow as Deepak suggested above & you too can have multiple Partners of same type in single Sales Order.
But there has to be a strong Business case in doing so... say different Ship tp Party for different line items in Sales Order or different BIll to Party for some line Items in Sales Order.
Hope this helps,
Thanks,
JIgnesh Mehta

Any report or Table to see orders with BP partner functions in SAP CRM?

Hello All,
Could anyone help me in getting the table or any report for orders with BP partner functions in SAP CRM?
Would appreciate replying at the earliest.
Cheers
Sreedhar

Hello Bruno,
Thanks very much.
It is somehow helpful for my need but not completly. This is ok when the orders are less in number.
My requirement is how to check the first name , last name and number for contact persons in a list of CRM orders(simply who is the contact person for a list of orders).Let me know for any additional info.
I would apprecaite if you could help me in getting any other way.
Cheers
Sreedhar
Edited by: sreedharhazari2 on Jun 8, 2010 9:18 AM

Read multiples files with same extension

how to read multiples files with same extension in java.
for ex : i would like to read all .DAT files from C drive using java.
How is it done

- You create the filter
- You get the list of files
- You open and read each file.
For the first two above you look at java.io.File and listFiles(FileFilter filter).
For the third you find whatever input stream is appropriate from java.io.*

Multiple accounts with same email

I have multiple accounts with same email
The one that has all my contacts is the one attached to FB but for some odd reason I can no longer access this specific account
When I try to reset my password, it only keeps asking me to change my FB password
Once I try logging in on Skype, it keeps asking my FB to connect to the other 2 Skype accounts, completely diffente usernames
I am only interested in the one that originally connected to my FB as it has all my contacts
As my other 2 accounts are my old Skype accounts and have my old contacts from years ago

Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

Multiple members with same alias

I have multiple members with same alias name. Are there anyway to build dimension members with same alias name?

Typically I will concatinate the member name (as either a prefix or suffix ) to the Alias to make it unique

Mounting multiple directories with same name on different severs to a single mount point on another server

We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree.

Two outputs for the same partner functions............

Hello,
I have come across the situation where i need to use two transmission medium for the same partner function, is it possible through the standard settings?
E.x. My client wants to send email and print to the sold to party while confirming order, what are the required settings need to be made?
Thank you.

Similar question was answered in the past, check the link Output transmission medium to print and email and the answer provided by Yadav suits your requirement.
Regards,

Multiple accounts with same email can't acces original account

ok, so i created a new skype. I was messing with skype account on my desktop and wound up unlinking and re linking the account basically i made 2 extra accounts and they have my live: random.namehere_1 and live: random.namehere_2 and i cant log into my original one anymore also when i try to do a recovery it says i have 2-3 skype accounts on my email and i cant log into my accounts by typing in the live:random.namehere and the password it just says ooops something went wrong basicallly saying the pw and account name are wrong when they arent i made sure of it. so how do i eliminate the cloned accounts and log into the main one.

Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

How to Split 1 Order into Multiple Deliveries based on Partner Function ?

Hello,
How can I split one Sales Order into multiple deliveries, based on the partner function "managed by" ?
The requirement is that one order will be created for different "managed by".
If partner function "managed by" is same at line item level in order, than the items having same "managed by" can be combined in one delivery, else delivery will split and multiple deliveries will be created from 1 Order.
Jatin Mistry

Hi,
You need to create a new requirement in tcode VOFM for that, together with your ABAP consultant. This requirement will be used in copy contol.
http://saptechsolutions.com/pdf/VOFMCopyRequirementRoutines.pdf
MdZ

Same partner functions shared by customer and vendor

Need to upload the partner functions centrally and then this to be mapped to Customer, Vendor & etc., i.e. these partner functions to be shared.
Can anybody suggest me how to do this by using LSMW?

for customer master you can use below LSMW method
Object               0050   Customer master
Method               0002   Extended PSM
Program Name         RFBIDEK0
Program Type         B   Batch Input
with BKNVP strcture.
For Vendor master you can use below LSMW method
Object               0040   Vendor master
Method               0001   Standard
Program Name         RFBIKR00
Program Type         B   Batch Input
with BWYT3      Vendor Master Record: Partner Functions (Batch Input)
sharing of partners ask your FDer...

ARD won't save multiple computers with same IP and different port!

I'm trying to access multiple computers over the internet behind a firewall with port forwarding.
I can access each computer, but ARD won't save the IP address and port (in IP Address column of ARD 3.1) of multiple computers with the same IP address. It will only save ONE. I've tried 'add by address', adding a list for each computer or adding a list for all those computers. Nothing has worked. ARD will actually change the first computer's IP address to 0.0.0.0
Example: Static IP address
Computer 1 xx.xxx.xxx.xxx:51 (public port 51 is forwarded to port 5900 on computer 1)
Computer 2 xx.xxx.xxx.xxx:52 (public port 52 is forwarded to port 5900 on computer 2)
Computer 3 xx.xxx.xxx.xxx:53 (public port 53 is forwarded to port 5900 on computer 3)
Has Apple really overlooked this or am I missing something? Isn't this how most people would remotely manage multiple Macs offsite?
Thanks

ARD cannot do this as you're asking. If your
workstations get their addresses from an NAT device
rather than being "real", the ports also need to be
forwarded in the router to the workstation's internal
IP address. ARD uses port 3283 for the reporting and
updating function, so if your Macs are getting their
IP addresses through NAT, since you can only forward
a port to a single workstation, you can only get
reports, push package/files to etc. for a single
workstation.
ARD uses the VNC protocol for observation and
control, though, and there are a range of IP
addresses for that protocol, starting with 5900. ARD
uses 5900 by default, so that port would be forwarded
to the first workstation. You would, I believe, need
to install VNC servers on the systems (since the ARD
client cannot listen on any port other than 5900
while VNC servers can be set for other ports such as
5901, 5902, etc. You would then forward 5901 to the
second workstation (and on to 5902, 5903, etc.). You
can then use the following information:
Remote Desktop 2: How to specify a port number
for a VNC client
to connect.
The only other options are: 1) to run the ARD
administrator on a workstation on the network, and
then take control of that system from outside, either
via VNC or another copy of ARD, or 2) set up a
virtual private network (VPN) so that when you
connect from outside, your admin system is officially
part of the local network.
Hope this helps.
That definitely helps. I have ARD installed on my MBP and on a workstation on the LAN. I have used ARD from the MBP to control ARD on a workstation on the local network, but it can get a little tricky. I already have VNC setup on all the workstations. I used to use COTVNC prior to purchasing ARD 3.1.
I guess what I'm really asking is...
How do I add a list of workstations and save the settings (same IP address for each workstation with different ports?) to control/VNC via ARD?
I simply want a list that shows each workstation, so I can control/VNC them using ARD offsite.
Name: Computer 1 IP Address: 123.123.123.123:5901
Name: Computer 2 IP Address: 123.123.123.123:5902
Name: Computer 3 IP Address: 123.123.123.123:5903
I don't want to have to manually type in the IP address into ARD every time.
Will ARD simply not add another computer to the list if it has the same IP address but different port number as a computer already on the list? I haven't been able to find a way to make ARD do this.

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Multiple Partners with Same partner Functions in LEAD

Similar Messages

Maybe you are looking for