Multiple PC's & one Sierra Wireless USB Card

? Can I use the one Next G Sierra Wireless USB card on my desktop PC and then take it away for use on the laptop when travelling.  It asks me to "register" it when I plugged it into the laptop but it was registered to my PC.  I do not want to sign up for another USB wireless device.  

Hey Rowan, If you have the 'activation has not been completed' message follow these steps to resolve- - While holding shift, press the option button (the cogs)- a tab will become available called 'diagnosis'-click this tab and find the tick box that says "sign up has been completed for this device"-check the box and click apply and then OK.-hit the connect button and you should be away. The only additional thing you may need to do if its a bigpond service is input your bigpond email address and password into the account tab in the same options area to get it to connect properly. apart from that there shouldnt be a problem. Hope that helps

Similar Messages

  • Sierra Wireless USB card  will not connect

    I have purchased a Sierra Wireless USB card (AT&T USB Connect 881) to use with a iBook G4. The green power lites are solid green. However, I can not get a signal from AT&T. No one has been able to help solve this problem. I am ready to return it to AT&T for a refund.

    Thx for ur reply. I just checked the model of the USB adapter is Belkin Basic N150.
    The xp is able to see and identify the iphone wireless network and shows it in available networks with full signal strength. Once I click on connect then an alert message says that it is detecting network type pls wait. Then another message appears stating that "selected network may be no longer in range. Pls refresh the list and connect again"
    As suggested by you I will try it on windows 7.

  • Sierra Wireless USB AirCard Support

    I have been evaluating the product for a bit now, and it seems pretty rock solid. I just started testing with some of out cellular broadband devices and have found an issue with one so far. the Sierra Wireless AirCard 875U is not recognized by ESM. It totally ignores and doesn't apply any policy to the adapter. no firewall or otherwize. Is this a known issue?

    Originally Posted by dave4nier
    When you hover over the ZESM icon, it shows a Sierra Wireless HSDPA Modem. However, the when connected to the BroadBand network, windows see's it using a wireless driver which ZESM doesn't know about. I can send you my policy, but I'm not sure that its relevant. I get this behavior with a stock install and the default policy. I can attach my policy files if you still feel its relevant.
    I think this is a fairly huge issue, and could allow a user to totally circumvent the ZESM client and leave the machine fully vulnerable.
    Can you try the following:
    Create a location called wireless
    Select an icon for the location
    In Wi-Fi Management click the "Filtered Access Points" tab and enter the SSID of your Wireless AP (it is case sensitive)
    Save and publish the policy.
    Does the ZESM client change locations?

  • When i connect ipod classic it crashes my wireless usb card?

    I Bought an ipod classic 7gen 160 gb/
    everytime i connect to sync with my comuter,
    my wireless usb disconnects..... is it because, boht of them use usb?

    If you are using an iPod Touch 4th generation, and your computer is a PC, soft boot the device (hold the power button and home button down at the same time). Once the device has "soft booted", see if the computer recognizes the device. If yes, then you are good to go. If it asks you to restore the device, then shut the iPod down using the power button only. Wait a moment and then restart the device. You may be prompted to install a driver, if so, then install it. Once the driver is installed you will be able to sync.
    Now, for some reason I still have to plug the device into the computer, open iTunes and turn my device off and on before it will recognize it, but after that it works fine.

  • Trying to install wireless usb card

    I put in the driver disc and click on the right file then the box comes up and shows waiting for disc copy help and nothing else happens. what am I doing wrong? is it the wrong software?
    Thanks
    Robert

    I would recommend maximizing the RAM with a 512 MB module in the one user-accessible RAM slot.
    http://eshop.macsales.com/item/Other%20World%20Computing/100SO512328L/
    Instructions for installing it can be found in this Apple Knowledge Base article:
    http://docs.info.apple.com/article.html?artnum=111918
    If you have the original install and restore CDs that came with it, and they include Mac OS X 10.2, you could get by with a 10.3 upgrade CD. This would be a little bit cheaper than the full install CDs, but if you ever had to install the system again, you would have to install Mac OS X 10.2 first, whereas with the Mac OS X 10.3 (Panther) full retail install set, you wouldn't have to take that extra step of installing Mac OS X 10.2 before upgrading again to 10.3.
    http://hardcoremac.stores.yahoo.net/macosx10pare.html
    http://hardcoremac.stores.yahoo.net/macosx10paup.html
    The original AirPort Card will work with the iBook as-is (with Mac OS X 10.2).
    Possible sources for the original AirPort Card:
    http://www.dvwarehouse.com/Apple-Original-AirPort-Wireless-Card-802.11B-p-31366. html
    http://store.airportcardsdirect.com/
    http://eshop.macsales.com/item/Apple/M7600LLE/
    http://www.megamacs.com/v1/?action=view&pid=967052
    Instructions for installing the original AirPort Card can be found here:
    http://docs.info.apple.com/article.html?artnum=111919

  • Sierra wireless drivers

    I have physically installed the Sierra Wireless MC8775 card into my S10-3, but do not have the drivers. Can anyone steer me to the drivers and the Sierra Wireless 3G Watcher ?
    Also, if anyone knows how to install bluetooth in the s10-3.

    Hi,
    drivers take the one of the Thinkpad X61 ...WWAN Driver here.
    ...Connection with watcher take this  Sierra Watcher  this one i use  on  my TP X60s ...
    sincerely KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Network Manager fails to connect with Sierra Wireless 3G/4G modem

    Hi,
    I have three Asus Laptops running with Arch (Asus N56VZ, Asus F3JC, Asus UL80VS). All laptops work with Cinnamon Desktop. Everything works fine except 3G Modem in Network Manager. I have two USB modems: Sierra Wireless AirCard 310U and Sierra Wireless AirCard 320U.
    Modems had worked fine in end of year 2012, when NetworkManager version was 0.9.6.4 and ModemManager 0.6.0.0. After update (NM >0.8.X.X, MM >0.7.X. - when the ModemManager.service appeared) until now, I can't connect to the internet on all Asus laptops. Since 2013 I have to use wvdial, because in wvdial modems works fine. It is Arch problem, because in Linux Mint 15 I can connect with NetworkManager.
    Sierra AirCard 310U - When I'm connecting to the internet, modem reboots itself.
    Sierra AirCard 320U - When I'm connecting to the internet, Network Manager can't obtain DHCP address.
    I would be grateful for any help.
    Sierra Wireless AirCard 310U (USB 3G Modem) log:
    aug 22 13:41:35 AsusN56VZ NetworkManager[309]: <info> Activation (ttyUSB2) starting connection 'Orange PL'
    aug 22 13:41:35 AsusN56VZ NetworkManager[309]: <info> (ttyUSB2): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    aug 22 13:41:35 AsusN56VZ NetworkManager[309]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled...
    aug 22 13:41:35 AsusN56VZ NetworkManager[309]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started...
    aug 22 13:41:35 AsusN56VZ NetworkManager[309]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete.
    aug 22 13:41:35 AsusN56VZ ModemManager[308]: <info> Simple connect started...
    aug 22 13:41:35 AsusN56VZ ModemManager[308]: <info> Simple connect state (3/8): Enable
    aug 22 13:41:35 AsusN56VZ ModemManager[308]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)
    aug 22 13:41:35 AsusN56VZ NetworkManager[309]: <info> (ttyUSB2) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
    aug 22 13:41:35 AsusN56VZ ModemManager[308]: <warn> (ttyUSB2): port attributes not fully set
    aug 22 13:41:38 AsusN56VZ ModemManager[308]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering)
    aug 22 13:41:38 AsusN56VZ ModemManager[308]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home)
    aug 22 13:41:38 AsusN56VZ ModemManager[308]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP location updated (MCC: '0', MNC: '0', Location area code: '4FB9', Cell ID: '9C65539')
    aug 22 13:41:39 AsusN56VZ ModemManager[308]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP location updated (MCC: '260', MNC: '3', Location area code: '4FB9', Cell ID: '9C65539')
    aug 22 13:41:40 AsusN56VZ kernel: usb 3-2: USB disconnect, device number 3
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB1: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB1: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB1: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ ModemManager[308]: mm_serial_port_close: assertion `priv->open_count > 0' failed
    aug 22 13:41:40 AsusN56VZ ModemManager[308]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> registered)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ ModemManager[308]: <info> Simple connect state (4/8): Wait to get fully enabled
    aug 22 13:41:40 AsusN56VZ ModemManager[308]: <info> Simple connect state (5/8): Register
    aug 22 13:41:40 AsusN56VZ ModemManager[308]: <info> (tty/ttyUSB2): released by modem /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2
    aug 22 13:41:40 AsusN56VZ ModemManager[308]: <info> Simple connect state (6/8): Bearer
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB1: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
    aug 22 13:41:40 AsusN56VZ kernel: sierra 3-2:1.0: device disconnected
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: resubmit read urb failed.(-19)
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
    aug 22 13:41:40 AsusN56VZ kernel: sierra 3-2:1.1: device disconnected
    aug 22 13:41:40 AsusN56VZ kernel: sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
    aug 22 13:41:40 AsusN56VZ kernel: sierra 3-2:1.3: device disconnected
    aug 22 13:41:40 AsusN56VZ kernel: sierra_net 3-2:1.7 wwp0s20u2i7: unregister 'sierra_net' usb-0000:00:14.0-2, Sierra Wireless USB-to-WWAN Modem
    aug 22 13:41:40 AsusN56VZ kernel: ModemManager[308]: segfault at 28 ip 0000000000433350 sp 00007ffff409e088 error 4 in ModemManager[400000+e0000]
    aug 22 13:41:40 AsusN56VZ systemd[1]: ModemManager.service: main process exited, code=dumped, status=11/SEGV
    aug 22 13:41:40 AsusN56VZ systemd[1]: Unit ModemManager.service entered failed state.
    aug 22 13:41:40 AsusN56VZ NetworkManager[309]: <info> ModemManager disappeared from bus
    aug 22 13:41:40 AsusN56VZ NetworkManager[309]: <info> (ttyUSB2): device state change: prepare -> unmanaged (reason 'removed') [40 10 36]
    aug 22 13:41:40 AsusN56VZ NetworkManager[309]: <info> (ttyUSB2): deactivating device (reason 'removed') [36]
    aug 22 13:41:40 AsusN56VZ laptop-mode[2414]: Laptop mode
    aug 22 13:41:40 AsusN56VZ NetworkManager[309]: <info> (ttyUSB2): cleaning up...
    aug 22 13:41:40 AsusN56VZ NetworkManager[309]: <info> (ttyUSB2): taking down device.
    aug 22 13:41:40 AsusN56VZ laptop-mode[2415]: enabled, not active
    aug 22 13:41:40 AsusN56VZ systemd-coredump[2336]: Process 308 (ModemManager) dumped core.
    aug 22 13:41:40 AsusN56VZ systemd[1]: Starting Modem Manager...
    aug 22 13:41:40 AsusN56VZ systemd[1]: ModemManager.service holdoff time over, scheduling restart.
    aug 22 13:41:40 AsusN56VZ systemd[1]: Stopping Modem Manager...
    aug 22 13:41:40 AsusN56VZ systemd[1]: Starting Modem Manager...
    aug 22 13:41:43 AsusN56VZ kernel: sierra_net 3-2:1.7 (unregistered net_device): usb_control_msg failed, status -19
    Sierra Wireless AirCard 320U (3G/4G Modem) log:
    aug 22 13:48:02 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) starting connection 'Orange PL'
    aug 22 13:48:02 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    aug 22 13:48:02 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 1 of 5 (Device Prepare) scheduled...
    aug 22 13:48:02 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 1 of 5 (Device Prepare) started...
    aug 22 13:48:02 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 1 of 5 (Device Prepare) complete.
    aug 22 13:48:02 AsusN56VZ ModemManager[314]: <info> Simple connect started...
    aug 22 13:48:02 AsusN56VZ ModemManager[314]: <info> Simple connect state (3/8): Enable
    aug 22 13:48:02 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: state changed (disabled -> enabling)
    aug 22 13:48:02 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
    aug 22 13:48:02 AsusN56VZ ModemManager[314]: <warn> (ttyUSB3): port attributes not fully set
    aug 22 13:48:02 AsusN56VZ ModemManager[314]: <warn> (ttyUSB4): port attributes not fully set
    aug 22 13:48:05 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: 3GPP Registration state changed (unknown -> registering)
    aug 22 13:48:05 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: 3GPP Registration state changed (registering -> home)
    aug 22 13:48:05 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: 3GPP location updated (MCC: '0', MNC: '0', Location area code: '4FB9', Cell ID: '9C65539')
    aug 22 13:48:05 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: 3GPP location updated (MCC: '260', MNC: '3', Location area code: '4FB9', Cell ID: '9C65539')
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: state changed (enabling -> registered)
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Simple connect state (4/8): Wait to get fully enabled
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Simple connect state (5/8): Register
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Simple connect state (6/8): Bearer
    aug 22 13:48:06 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3) modem state changed, 'enabling' --> 'registered' (reason: user-requested)
    aug 22 13:48:06 AsusN56VZ NetworkManager[315]: <info> WWAN now enabled by management service
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Simple connect state (7/8): Connect
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: state changed (registered -> connecting)
    aug 22 13:48:06 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3) modem state changed, 'registered' --> 'connecting' (reason: user-requested)
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: signal quality updated (40)
    aug 22 13:48:06 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: access technology changed (unknown -> hsdpa, hsupa)
    aug 22 13:48:09 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: state changed (connecting -> connected)
    aug 22 13:48:09 AsusN56VZ ModemManager[314]: <info> Simple connect state (8/8): All done
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 2 of 5 (Device Configure) scheduled...
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 2 of 5 (Device Configure) starting...
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): device state change: prepare -> config (reason 'none') [40 50 0]
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): bringing up device.
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 2 of 5 (Device Configure) successful.
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 3 of 5 (IP Configure Start) scheduled.
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 2 of 5 (Device Configure) complete.
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 3 of 5 (IP Configure Start) started...
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): device state change: config -> ip-config (reason 'none') [50 70 0]
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (wwp0s20u2i7) Beginning DHCPv4 transaction (timeout in 45 seconds)
    aug 22 13:48:09 AsusN56VZ kernel: IPv6: ADDRCONF(NETDEV_UP): wwp0s20u2i7: link is not ready
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> dhclient started with pid 2351
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 3 of 5 (IP Configure Start) complete.
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 4 of 5 (IPv6 Configure Timeout) started...
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: Internet Systems Consortium DHCP Client 4.2.5-P1
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: Copyright 2004-2013 Internet Systems Consortium.
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: All rights reserved.
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: For info, please visit https://www.isc.org/software/dhcp/
    aug 22 13:48:09 AsusN56VZ dhclient[2351]:
    aug 22 13:48:09 AsusN56VZ NetworkManager[315]: <info> (wwp0s20u2i7): DHCPv4 state changed nbi -> preinit
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: Listening on LPF/wwp0s20u2i7/8e:1d:fe:e0:02:07
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: Sending on LPF/wwp0s20u2i7/8e:1d:fe:e0:02:07
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: Sending on Socket/fallback
    aug 22 13:48:09 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 5
    aug 22 13:48:14 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 5
    aug 22 13:48:19 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 7
    aug 22 13:48:26 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 7
    aug 22 13:48:33 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 7
    aug 22 13:48:36 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: signal quality updated (40)
    aug 22 13:48:40 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 10
    aug 22 13:48:50 AsusN56VZ dhclient[2351]: DHCPDISCOVER on wwp0s20u2i7 to 255.255.255.255 port 67 interval 17
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <warn> (wwp0s20u2i7): DHCPv4 request timed out.
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> (wwp0s20u2i7): canceled DHCP transaction, DHCP client pid 2351
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 4 of 5 (IPv4 Configure Timeout) scheduled...
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 4 of 5 (IPv4 Configure Timeout) started...
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <warn> Activation (ttyUSB3) failed for connection 'Orange PL'
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> Activation (ttyUSB3) Stage 4 of 5 (IPv4 Configure Timeout) complete.
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): device state change: failed -> disconnected (reason 'none') [120 30 0]
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3): deactivating device (reason 'none') [0]
    aug 22 13:48:54 AsusN56VZ ModemManager[314]: <info> Modem /org/freedesktop/ModemManager1/Modem/1: state changed (connected -> disconnecting)
    aug 22 13:48:54 AsusN56VZ NetworkManager[315]: <info> (ttyUSB3) modem state changed, 'connected' --> 'disconnecting' (reason: user-requested)
    Last edited by Shocker (2013-09-14 20:08:08)

    Shocker wrote:I don't think it's kernel problem, because Linux Mint 15 have kernel 3.8 and there is everything fine. Maybe systemd (Fedora & Arch have systemd, but Mint sysvinit..), maybe version of dhcpcd, I have no idea...
    To test, I downgraded my kernel
    ~ ᐅ uname -r
    3.9.5-301.fc19.x86_64.debug
    And now I see in messages
    Sep 15 09:46:17 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) starting connection 'Telstra'
    Sep 15 09:46:17 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Sep 15 09:46:17 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 1 of 5 (Device Prepare) scheduled...
    Sep 15 09:46:17 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 1 of 5 (Device Prepare) started...
    Sep 15 09:46:17 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 1 of 5 (Device Prepare) complete.
    Sep 15 09:46:17 localhost modem-manager[757]: <info> (ttyUSB2) opening serial port...
    Sep 15 09:46:17 localhost modem-manager[757]: <warn> (ttyUSB2): port attributes not fully set
    Sep 15 09:46:17 localhost modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (disabled -> enabling)
    Sep 15 09:46:17 localhost dbus-daemon[618]: modem-manager[757]: <info> (ttyUSB2) opening serial port...
    Sep 15 09:46:17 localhost dbus-daemon[618]: modem-manager[757]: <warn> (ttyUSB2): port attributes not fully set
    Sep 15 09:46:17 localhost dbus-daemon[618]: modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (disabled -> enabling)
    Sep 15 09:46:18 localhost dbus-daemon[618]: modem-manager[757]: <info> (ttyUSB2): using PDU mode for SMS
    Sep 15 09:46:18 localhost modem-manager[757]: <info> (ttyUSB2): using PDU mode for SMS
    Sep 15 09:46:18 localhost dbus-daemon[618]: modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (enabling -> enabled)
    Sep 15 09:46:18 localhost modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (enabling -> enabled)
    Sep 15 09:46:18 localhost NetworkManager[724]: <info> WWAN now enabled by management service
    Sep 15 09:46:19 localhost dbus-daemon[618]: modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (enabled -> registered)
    Sep 15 09:46:19 localhost modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (enabled -> registered)
    Sep 15 09:46:19 localhost dbus-daemon[618]: modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (registered -> connecting)
    Sep 15 09:46:19 localhost modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (registered -> connecting)
    Sep 15 09:46:19 localhost dbus-daemon[618]: modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (connecting -> connected)
    Sep 15 09:46:19 localhost modem-manager[757]: <info> Modem /org/freedesktop/ModemManager/Modems/1: state changed (connecting -> connected)
    Sep 15 09:46:19 localhost kernel: [ 5056.773068] IPv6: ADDRCONF(NETDEV_UP): wwp0s29u1u1i7: link is not ready
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 2 of 5 (Device Configure) scheduled...
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 2 of 5 (Device Configure) starting...
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): device state change: prepare -> config (reason 'none') [40 50 0]
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): bringing up device.
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 2 of 5 (Device Configure) successful.
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 2 of 5 (Device Configure) complete.
    Sep 15 09:46:19 localhost avahi-daemon[607]: Registering new address record for fe80::c0c3:a2ff:fe4a:207 on wwp0s29u1u1i7.*.
    Sep 15 09:46:19 localhost kernel: [ 5056.876750] IPv6: ADDRCONF(NETDEV_CHANGE): wwp0s29u1u1i7: link becomes ready
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 3 of 5 (IP Configure Start) scheduled.
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 3 of 5 (IP Configure Start) started...
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): device state change: config -> ip-config (reason 'none') [50 70 0]
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Beginning DHCPv4 transaction (timeout in 45 seconds)
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> dhclient started with pid 10376
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 3 of 5 (IP Configure Start) complete.
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 4 of 5 (IPv6 Configure Timeout) started...
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    Sep 15 09:46:19 localhost dhclient[10376]: Internet Systems Consortium DHCP Client 4.2.5
    Sep 15 09:46:19 localhost dhclient[10376]: Copyright 2004-2013 Internet Systems Consortium.
    Sep 15 09:46:19 localhost dhclient[10376]: All rights reserved.
    Sep 15 09:46:19 localhost dhclient[10376]: For info, please visit https://www.isc.org/software/dhcp/
    Sep 15 09:46:19 localhost dhclient[10376]:
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): DHCPv4 state changed nbi -> preinit
    Sep 15 09:46:19 localhost dhclient[10376]: Listening on LPF/wwp0s29u1u1i7/c2:c3:a2:4a:02:07
    Sep 15 09:46:19 localhost dhclient[10376]: Sending on LPF/wwp0s29u1u1i7/c2:c3:a2:4a:02:07
    Sep 15 09:46:19 localhost dhclient[10376]: Sending on Socket/fallback
    Sep 15 09:46:19 localhost dhclient[10376]: DHCPREQUEST on wwp0s29u1u1i7 to 255.255.255.255 port 67 (xid=0x6e8c90b2)
    Sep 15 09:46:19 localhost dhclient[10376]: DHCPNAK from 10.102.67.253 (xid=0x6e8c90b2)
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): DHCPv4 state changed preinit -> expire
    Sep 15 09:46:19 localhost dhclient[10376]: DHCPDISCOVER on wwp0s29u1u1i7 to 255.255.255.255 port 67 interval 6 (xid=0xae2cec8)
    Sep 15 09:46:19 localhost dhclient[10376]: DHCPREQUEST on wwp0s29u1u1i7 to 255.255.255.255 port 67 (xid=0xae2cec8)
    Sep 15 09:46:19 localhost dhclient[10376]: DHCPOFFER from 10.102.67.253
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): DHCPv4 state changed expire -> preinit
    Sep 15 09:46:19 localhost dhclient[10376]: DHCPACK from 10.102.67.253 (xid=0xae2cec8)
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): DHCPv4 state changed preinit -> bound
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> address 10.102.67.12
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> prefix 24 (255.255.255.0)
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> gateway 10.102.67.12
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> nameserver '10.4.81.103'
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> nameserver '10.4.182.20'
    Sep 15 09:46:19 localhost NetworkManager[724]: nm_ip4_config_add_wins: assertion `wins > 0' failed
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> wins '0.0.0.0'
    Sep 15 09:46:19 localhost NetworkManager[724]: nm_ip4_config_add_wins: assertion `wins > 0' failed
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> wins '0.0.0.0'
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    Sep 15 09:46:19 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 5 of 5 (IPv4 Commit) started...
    Sep 15 09:46:19 localhost avahi-daemon[607]: Joining mDNS multicast group on interface wwp0s29u1u1i7.IPv4 with address 10.102.67.12.
    Sep 15 09:46:19 localhost avahi-daemon[607]: New relevant interface wwp0s29u1u1i7.IPv4 for mDNS.
    Sep 15 09:46:19 localhost avahi-daemon[607]: Registering new address record for 10.102.67.12 on wwp0s29u1u1i7.IPv4.
    Sep 15 09:46:19 localhost dhclient[10376]: bound to 10.102.67.12 -- renewal in 97473 seconds.
    Sep 15 09:46:20 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
    Sep 15 09:46:20 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) Stage 5 of 5 (IPv4 Commit) complete.
    Sep 15 09:46:20 localhost NetworkManager[724]: <info> (wwp0s29u1u1i7): device state change: secondaries -> activated (reason 'none') [90 100 0]
    Sep 15 09:46:20 localhost NetworkManager[724]: <info> Policy set 'Telstra' (wwp0s29u1u1i7) as default for IPv4 routing and DNS.
    Sep 15 09:46:20 localhost NetworkManager[724]: <info> Activation (wwp0s29u1u1i7) successful, device activated.
    I'm going to ask on #fedora and see how i can best diagnose what's going on. At least I now have it working, albeit on an older kernel.
    Last edited by qnm (2013-09-14 23:48:05)

  • Trackpoint stops working after wireless USB install

    I have a Lenovo Thinkpad X61s.
    I just installed a wireless USB card today and it rendered the trackpoint non-functional.  Uninstalling the wireless software does not correct the issue.
    A USB mouse will work on the laptop.
    Any thoughts on how to correct this?
    Thanks,
    -Scott

    This driver resolved my issue;
    https://github.com/d235j/360Controller/releases/

  • How and where do I install a wireless internet card in G3 PowerBook?

    I own a G3 PowerBook "Pismo", Firewire, M7572. Not being familiar with working with the internals of a laptop, how and where does one install wireless internet card? Any help would be appreciated

    The G3 Powerbook "Pismo" takes an original Apple Airport Card, and NOT the extreme card. The original airport card is available here:
    http://www.macwireless.com/html/products/wirelesscards/11g_11bcards/airportcard.php
    http://www.ifixit.com/Apple-Parts/Airport-Card/IF143-010
    http://www.quadmation.com/AIRPORT.cardonly/
    http://www.powerbookmedic.com/Apple-Airport-Card-80211b-p-16144.html
    http://www.a1acomputing.com/usorapaicam7.html
    Installation instructions are here, if you are adventurous:
    http://www.ifixit.com/Guide/Mac/PowerBook-G3-Pismo/Airport-Card/6/3/Page-1

  • Hi everyone, I have an old g4 desktop it runs on 0S 10.3. I want to get connected to my wireless router but I am getting a bit confused on what I need to buy to do this. I have looked on ebay at pci cards, usb cards

    Hi everyone,
    I have an old g4 desktop which runs on osx 10.3. I want to get it connected to my wireless router but I don't know what I need to buy to do this. I have tried a usb card which did not work. Do I need a pci card or an airport extreme card?
    Many thanks,
    Acphot

    To build on what Tesserax says, not all USB sticks will work on Panther, but here is one that does:
    http://eshop.macsales.com/item/NewerTech/MXP3802NU2C/
    I have one of these and it works with both a PowerMac G4 running Leopard and a 1998 PowerBook G3 running Panther.
    And here's a little more free advice.
    Some of the older G4 desktops like my PowerMac 3,6 only take the original AirPort card, which is different from the newer machines that take the newer AirPort Extreme card. Both are available if you hunt for them, but modern WPA-2 encryption is not supported on the original AirPort card, so it will not be able to join your network if it has this encryption. The newer AirPort Extreme airport card does support WPA-2 encryption, as does the NewerTech USB AirPort stick. If your G4 takes the older card, you cannot plug in the newer AirPort Extreme card. I have not looked lately, but I believe the sockets themselves are different. In any event, the NewerTech USB stick is cheaper than an AirPort card.
    If you don't already have Mactracker, you can download it for free here:
    http://mactracker.ca/
    You can look up your Mac on it and see which AirPort card it has. You can also check out what upgrades are available.
    A couple of good things to do is to max out the RAM and upgrade the OS. OWC will have the RAM and they are very knowledgable about Macs and can advise you on any hardware upgrades they offer. You would probably have to look at EBay to find a retail disc for upgrading to Tiger or Leopard, and preferably the latest version of the OS that is supported. Panther has some limitations, and I beleve that Google no longer supports Panther so you might need to find a different browser if you stay with Panther.
    Good luck!

  • Those usb wireless internet card things ...?

    My father's been pushing me to find a more budget friendly alternative to our current internet situation. We're connected with a DSL modem, it's not wireless.
    He's been asking me about the usb wireless internet cards that he's seen on TV, like the ones that AT&T promote in their "find the internet everywhere" commercials.
    Now, I'm finding that the service for these cards is more expensive then what we're paying now, so we probably won't be purchasing this sort of service any time soon, but I am confused as to what exactly it is.
    I'm assuming that if I had one of these cards that I could get rid of the box that's connected to the wall (the modem that I connect my computer to to get the internet). But as I'm researching this I'm finding that there are "wireless internet cards" cards that allow older computers to connect to wireless modems (something that my computer can do... that most new computers can do). I would think that these wireless internet cards are different from the wireless internet devices that I'm looking for. (but maybe they're not?) I'm really confused.
    If anyone could shed some light on these cards I'd be grateful Thank you!

    GfulDedFan wrote:
    The wireless internet cards are different. They, for all practical purposes, are a cellphone of sorts that you attach to your computer and then it dials into the network (AT&T's, Verizon's, Sprint, etc.) and provides you with internet service just like a cellphone gives you phone service. They work just about anywhere again just like a cellphone.
    AT&T's Laptop Connect cards seem to be primarily in the ExpressCard form factor, which Apple only supports in the MacBook Pro right now. They also have the older PC Cards that might work with older Apple notebooks (I think). Then there's the USB version.
    http://www.wireless.att.com/businesscenter/solutions/wireless-laptop/modem-cards .jsp?WT.svl=calltoaction
    This seems to be designed for business customers. I couldn't find anything suggesting that this is made available to the regular consumer market.

  • Can there by multiple accounts under one id?  I just loaded a $25 gift card and it showed up in my balance.  My daughter, under the same id had $12.0 left from a previous gift card.  Now only the $12.01 shows up and the $25 is nowhere to be found?

    Can there be multiple accounts under one apple id?  My daughter and wife apparently share an id between my daughter's ipod and my wife's ipad.  My daughter has what she believes is her $12.01 left from a gift card.  My wife loaded a $25 gift card recently (I saw the $25 balance in her account when she was done) and after a password change, now all that shows up is the $12.01?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • USB wireless internet card

    i was told i could connect my USB wireless internet card to my time capsule, i created the network and need help figuring out how to get internet with the USB card.

    Welcome to the discussions, Diane!
    i was told i could connect my USB wireless internet card to my time capsule
    Unfortunately, you received incorrect information. The USB port on the Time Capsule will only support a printer and/or hard drive. Modems are not supported.
    See this Apple Support Document for more details:
    http://support.apple.com/kb/HT2421
    Message was edited by: Bob Timmons

  • HT1349 I have a Power PC G5 mac. It's Dual 1.8 GHz and has 1 GB DDR SD Ram. This mac has no wireless Airport Card. Where do I get one to install in the computer so that it is able to pick up wifi signal and how much is the cost?

    I have an older Power PC G5 desktop mac. It has 1GB DDR and SD Ram and Dual 1.8 GHz. The problem is there is no wifi signal. I think I need an airport card to insert in order for this model to pick up wifi. How do I know which airport card to use?

    Your Power Mac G5 had an option to have an 802.11b/g AirPort Extreme Card. You basically have two choices: 1) Search the Internet for vendors that still provide this card, or 2) Get a wireless USB adapter that supports both 802.11b/g, but also the newer 802.11n standard. An example of this USB adapter can be found here.

  • Need a router to conect ipad to a telstra 4G usb Sierra wireless "AirCard 320U

    need a router to conect ipad to a telstra 4G usb Sierra wireless "AirCard 320U

    You need a MiFi. Talk to your cell provider.

Maybe you are looking for