Multiple PC setup (1 for rendering, 1 for composing)
Good morning all,
I have recently built a new machine for all my editing needs (will most of them...). The machine specs are listed under "Composing Machine". I am planning on cleaning up my previous machine and hopefully I can utilize it for strictly rendering. This machine specs is listed below as "Rendering Machine".
I am on my company's network and would like to setup my Rendering Machine. Both of my boards have dual NIC so perhaps I can do a direct connection using the 2nd Ethernet ports.
Is there a guideline for doing this (setting up a dedicated rendering machine)? What would be a good place to start? In the past I was composing and rendering on the same machine.
Thanks in advance for any responses!
Composing Machine Specs:
Win 8.1 - 64 bit
X99 platform (ASUS X99-E WS)
i7-5960x CPU (8 cores)
64GB DDR4 (G.Skill 2800) Ram
(MAIN OS + APPS) - Samsung XP941 (M.2)
(PREVIEWS + CACHING) - Corsair Neutron XL 960GB SSDs
TBolt Card connecting to an Areca 16TB storage tower (ALL MEDIA FILES)
Titan-X (soon to be added for 3 monitor support) but currently using the Quadro 4000
Rendering Machine Specs:
OS not yet decided but perhaps Win 8.1 - 64 bit
Dual Intel® Socket LGA 2011/C602 chipset board (ASUS Z9PE-D8 WS)
Dual E5-2670 processors (8 cores each)
64 GB Ram
Quadro 4000 + Tesla C2075 (Maximus Config)
HDDs have not been figured out yet but most like a few large drives in a raid-0 configuration and separate drive for main OS + apps.
Why would you want a less powerful configuration for exporting (I assume your use of rendering really means exporting)?
Maximus is old technology (2011-2012), I would guess your Titan X on your "composing" computer would easily outperform the Maximus.
Your choice of 8-core E5-2670 at 2.6 GHz while costing about $3000 (plus lots more for motherboard and memory) just for the two chips probably would not be much faster than a single $1000 slightly overclocked i7-5960X with 8 cores. I do not have any test data on the dual E5-2670, but we do have PPBM8 data on Eric Bowen's (ADK) dual -E5-2687, also 8 cores but at 3.1 GHz while your proposed E5-2670 only runs at 2.8 GHz
Similar Messages
-
Multiple Monitor Setup for HPE-180t w/ NVIDIA GeForce GT 220 (only one DVI port)
I am wanting to connect mutliple montitors via DVI connection to my HPE-180t. My graphics card is the NVIDIA GeForce GT 220 which has 3 ports (VGA, HDMI, DVI) and does support mutli monitor display. What is the best way for me to connect multiple monitors to my desktop? I would like for all of them to be connected via DVI.
Thank you so much,
Angela
``````````````````````````````````````````
old computer: HP Pavilion PU131AV / a1050y, Windows XP MCE, SP3 32bit, Nvidia GeForce 6600, Intel Pentium 4 CPU, 3.20 GHz, 2GB of RAM
new computer: HPE-180t, Windows 7 Pro (64bit), Nvidia GeForce GT 220, Intel Core i7-930 quad-core CPU @ 2.80 GHz, 8GB of RAMWhat is the end goal you are attempting to acheive? Are you looking to clone all three monitors or each monitor to be independent of the other (extended display)?
This document covers how to configure the monitors in Windows 7. I didn't see the GT 220 listed in the specifications, so I take it this is one purchased separately for the unit. Most video cards require multiple monitors to be connected to a different port (to truly achieve a multiple monitor setup). Since the card only has one DVI port, then the other ports (HDMI and VGA will need DVI adapters). An example of an HDMI - DVI adapter can be found here.
The tricky part will be using the VGA - DVI adapter as DVI ports are typically DVI-D which makes it a pure digital signal. VGA is analog, so the adapter will need to be special if the monitor is using a DVI-D port. If it is a DVI-A or DVI-I port, then a standard VGA - DVI adapter will work. If it is a DVI-D port, you will need an active VGA - DVI adapter. If it is DVI-A/I, then a passive adapter will work. This is an example of an Active VGA - DVI adapter. For that adapter, a VGA cable will need to be connected to the VGA port with that end connected to the VGA side of the adapter and then being connected to the DVI port of the monitor.
Provided the video card supports 3 monitors, this would allow all monitors to have a DVI connection. Keep in mind that the VGA port will still deliver an analog signal as opposed to the DVI and HDMI ports. The card specifications do not really say how many monitors it supports, but it most likely does support three monitors.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Single setup file for BPM Suite 11g or later
Hi
Please tell me where to find a single setup file for Latest Oracle BPM Suite.
I could not install all required software with multiple setup files.Hi
1. Sorry. There is Nothing single setup file for Oracle BPM Suite like you are expecting for any typical software application.
2. Option 1: Yes. If you are familiar with VM Ware and virtual machine, then you are ok to some extent. Oracle do have like a single vm image that takes care of all you want. Provided you have VM installed. Means we do have an image that contains all pre-requisites and full oracle bpm software like Oracle XE, RCU, WLS, SOA/BPM on top of WLS, BPM/SOA Domain. But this is for advanced and not for beginners unless you know VM Ware and virtual images.
3. If you are a java/j2ee developer/architect, then here are the steps for installation:
a) Good machine with atleast 8 GB RAM.
b) Install WLS Latest Version. Install SOA/BPM matching version on top of this WLS.
c) Install Oracle XE Database or have access to already installed regular Oracle 11g Database.
d) Download RCU same version as above of soa version and unzip and install in the above Database. I am not giving all steps. Just an overview.
e) Now run config wizard, create a bpm/soa domain and refer above rcu details (soa_infra, mds etc). You will have a soa/bpm domain.
f) Download and install JDeveloper IDE same matching version. Here you will create any soa / bpm / bpel applications. Once all done. Deploy on the above created domain.
So unfortunately, there is nothing like a single .exe or setup file to install oracle bpm/soa. The closest is a vm image which is kind of advanced. But for a normal typical software developer, you had to follow above step 3 (a to f).
Unfortunately if you do not have Virtual Machine, you should and must install all the software(s) and configuration(s). There is no other alternative. Its very simple either way.
Thanks
Ravi Jegga -
HT204053 can you have multiple apple id's for the family but we all use the same iCloud?
Can you have multiple apple id's for the family members but we all us the same iCloud account?
You'll have to have an ID you all share in order to have a shared iCloud account. It would be sensible for each person to have their own ID and their own iCloud account for email and their own data (each would be on their own computer/iOS device or user account on a Mac) and then have a common account which everyone would sign into in System Preferences>Mail, Contacts and Calendars to access shared data.
You don't want to be all using the email in a common account - if people are using email aliases remember these can't be detached from the account and transferred to another one. Having all your emails mixed up together can be somewhat impracticable. -
Printers do not show up in Page Setup Format for menu
Hello. I just installed Acrobat 9 Professional. Upgrade from AP7. For some reason, when I go to select the printer in the Page Setup> Format For> dropdown menu, the printers do not show up. When I try to make a pre-set for this printer it never works and always defaults back to Language Level 3, which gives me a postscript error when I try to print. It prints fine at Language Level 2 but I can't get the setting to stay. Any clues???
thank you in advance,
RandyGeraldine,
There are some oddities in Pages' methods.
What you did was save the changed template which had been altered on the page but you also needed to "capture" and save the Layout or Section over the existing one in the document using the same name to replace it.
I will walk you through making your own version of a template.
1 Open a new document using the template you wish to customise.
2 Don't change anything yet, but open every section from the Sections pull down menu so you have a sequence of pages each with a page of a different section design.
3 Make Master Objects selectable if they are not. Change each Section to your liking.
4 +Menu > View > Page Thumbnails+
5 Select first Thumbnail in sidebar +Menu > Format > Advanced > Capture Pages… > Name : Type exactly the same name as the section > It will ask you if you want to replace the existing section > Replace+
6 Repeat this for each section until you have replaced them all.
7 +Menu > File > Save as Template… > Save with a New Name+
8 +Menu > File > New from Templates > My Templates > Choose your New Name template+
You now have a document customised to your design.
Peter -
Multiple TYPEELIM property values for an account
I am trying to set automatic adjustment business rules and need to assign multiple multiple TYPEELIM property values for an account. Any idea how to achieve this?
Here is my example. Letu2019s assume there are 2 eliminations I need to do.
Elimination 1: Account A, B, C going to Account Y
Elimination 2: Account A, B, D going to Account Z
For elimination 1, to group source accounts (A,B,C), I want to assign u201CELIM1u201D for TYPEELIM property to all source account (A,B,C).
For elimination 2, to group source accounts (A,B,D), I want to assign u201CELIM2u201D for TYPEELIM property to all source account (A,B,D).
As you see, accounts A and B are repeated in both cases. I am not sure how I can assign both ELIM1 and ELIM2 property for these two accounts.
Options I have thought of:
1. Include automatic adjustment line by line: But since I have many accounts, this will be very lengthy and not good from maintenance point of view.
2. Include one ELIM1 in TYPEELIM and ELIM2 in Dimlist: But my real case is more than just two elims as mentioned above. What if there are 4 elim and includes same account?
Any idea on this?
Thanks in advance.Hi,
http://help.sap.com/saphelp_bpc75/helpdata/en/5A/69200C88AA40C9B18844A25259F147/frameset.htm
Administration->Business Calculation->Business Rule Management->Automatic Adjustment->Automatic Adjustment Detail
This is for 7.5, but majority of contents are not changed from 7.0.
Regards,
YH Seo -
We have two Apple ID's but share the same computer....that runs Itunes...How do i setup Icloud for ea. user ID?
You can't merge Apple IDs. What you could do is set up your phone to use the same iCloud accout you are using on your Mac. To do this, go to Settings>iCloud and turn all synced data (Contacts, Calendars, etc.) to Off. When prompted, choose to keep the data on the phone. When everything is off, scroll to the bottom and tap Delete Account. Now add the iCloud account you set up on your Mac (with the same Apple ID) and turn syncing back on for Calendars, Contacts, etc. When prompted, you will probably want to choose merge, to merge the data on your phone with the existing data on this iCloud account.
-
How to configure multiple listeners to listen for the same instance.
Hello everyone,
I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
Please only give detailed answers with example as I am tired of simple answers with details that I already know.Hello,
Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
i.e
local_listener=MY_SET_OFF_LISTENERS
in your tnsname.ora add an entry called:
MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
If you want your clients can be balanced over the 3 listeners -
How do I add multiple rows in Numbers for iPad?
how do I add multiple rows in Numbers for iPad?
Hi James,
On the iPod I can only insert what is on the clipboard but I can insert however many rows I have there. Is it working differently for you? Benjoon seemed to think that he could not do this in Numbers. He was ruling Numbers out because of it. He doesn't need to do that because of this issue.
If I was needing to insert multiple blank rows often I might keep a table of blank rows or just some blank rows at the end of the working table that I could copy/paste. This is no different than Numbers on the Mac.
quinn -
I have a brand new macbook pro 15" with latest Lion. Can anyone tell me why, when I open word or preview etc that multiple files open?For eg if I open a word doc, the last 1-3 docs that I have worked previously on all open. Can anyone tell me why?
You have a choice as to whether or not applications in Lion like Word or Preview (or even Safari) save and re-open previous documents or windows... just hold down the option key while quitting a program and when you re-open it you won't get the previous documents or windows when you re-open the application. You can see this by selecting the open program in the menu bar and when holding down the option key the quit function will change to quit and discard open windows. This feature in Lion is referred to as "Resume" and is great if you want to restart an app and return to what you're doing (for example in Safari re-opening existing windows and tabs from your previous session). You still have the option to close individual windows within an app before quitting and they will not re-open when the app is launched again.
This Resume function is not related to saving your work (a word or text document for example). This is handled by Lion's "Auto-Save" and "Versions" functions. See http://www.apple.com/ca/macosx/whats-new/auto-save.html
Hopefully this is the complete answer you're looking for. -
Error while filling setup tables for 2lis_13_vahdr
Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
NithyaHello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran -
Error while filling setup table for Sales
Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SGHi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ -
Error while filling setup table for 2LIS_03_BF
Hello,
I am getting an error while filling set-up table for 2LIS_03_BF.
Following is the screenshot of the same.
If I check in ST22, I get following,
I could fill the setup table for other datasource 2LIS_03_BX without any problem.
Please suggest.Hi,
Can you try filling the setup table data for that range in background?
Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
But still can't really say what that dump tells from what you attached.
Thanks,
Sathya -
Problem while filling the Setup Table for the DS 2LIS_02_SCL.
Hi All,
When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
Waiting for your valuable inputs.
Thanks in Advance.Hi,
When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
In your case, the data souce is 2LIS_02_SCL for purchasing.
when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
2LIS_02_SCL
2LIS_02_ITM
Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
you need to run the V3 jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
once the delta queues gets 0 records by running V3 Jobs manullay.
Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW) *=Application number.
Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
I hope this may help yoou.
Regards.
Rambabu
Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM -
I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068643839
Start time: 2012-07-31 16:23:37
End time: 2012-07-31 16:33:32
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for IS: Use the following information to resolve the error, and then try the setup process again.
Next step for AS: Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: Haansi-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2005 SQLEXPRESS MSSQL.1
Database Engine Services 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SQL Server Replication 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SharedTools 1033
Express Edition 9.4.5000 No
SQL Server 2005
Tools 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.4.5000 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 Database Engine Services 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 SQL Server Replication 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1617.0 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2318.0 No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SS2012
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSOLAP$SS2012
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: PC\Haansi
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SS2012
INSTANCENAME: SS2012
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SS2012
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SS2012
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Haansi-PC\Haansi
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htmPlease help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm
Maybe you are looking for
-
I am unable to sync usic to my touch Ipod..When I plug it into my laptop Itunes opens but the word 'device' along with the name of my Ipod does not apperar. My Ipod and Itunes are upto to date. After Itunes opens a small box with the word Ipod appear
-
How to migrate DB from Access 97 to Oracle 8.1
The actual release of the Oracle Migration Workbench supports only Oracle 9i DB's. Is there any way to do this, without updating to Oracle 9i?
-
Safari, iChat & SoftwareUpdater suddenly not working.
Recently certain applications on my computer haven't been working. Whenever I open any of the following applications (Safari, iChat & Software Updater),I get the rolling little beachball and it freezes up the program. What is causing this and what ca
-
OLD files called MooV! How to play them?
Hi there, I was recently looking to get some glimmering water footage for a shot in a project I'm working on and remembered that, like 8 or 9 YEARS ago I had some footage elements that would be perfect. So I went to searching on my old backups and fo
-
Well my problem basicly is that when i shoot a photo with my frontal camera its like i made it with a calculator.. When i film a video the camera is okey.. Also the 21mps camera isnt good. I did a repair and it was good like when i bought it..But whe