Multiple PCMCIA GPBIB cards

I am trying to run multiple PCMCIA GPBIB cards on a Compaq NC6000 laptop, running windows 2000. Device manager will recognize both cards but MAX will only see the first one inserted. I have tried changing the PCMCIA card buss drivers to the windows generic ones and tried manually changing the GPBIB address before inserting the second card. Nothing I have done has made a difference. Any help would be appreciated.

Well one of our testing engineers here figured it out at one point and gave me the information. What resolved the issue was enabling legacy USB support in the BIOS. I'm not sure how this affects the PCMCIA cardbuss but it worked. So if anyone runs into this problem give this solution a try.
Cheers…

Similar Messages

Max Not Detecting PCMCIA GPIB Card

I'm having trouble getting NI MAX to detect that I have a PCMCIA GPIB Card in the computer. The C-Drive under hardware manager knows it's in the slot and says it's working fine. I tried to uninstall the GPIB Card so I could reinstall it but it won't let me.
I also tried adding hardware to MAX and selecting the PCMCIA card but it says that it can't be added.
I'm using the latest versions of GPIB, VISA, and MAX software that I can on a Windows 2000 computer.
Thanks

Hello,
When you say MAX is having trouble detecting the card, what exactly is happening? Do you see the card in MAX, but then you can't communicate with it? Does it show up with an error, or does it not show up at all? Could you give me the exact error message that you see. Are you using this on a laptop, or are you using a PCI-PCMCIA converter on a desktop? Does this happen on multiple computers? And just to verify, what version of NI-488.2 are you using? Hit <F5> in MAX to refresh the window and see if it shows up then. You could also try reinstalling the NI-488.2 driver, to see if it helps. Please let me know the answers to the questions above, and we can go from there to try to get this issue resolved. Thanks!
Regards,
Ebele O.
National Instruments

Premiere Elements 9 crashes with multiple NVIDIA graphics cards under Windows 7

I've just installed Premiere Elements 9 and found that it will not run at all with multiple NVIDIA graphics cards active under Windows 7. Per all the other discussions, I updated the NVIDIA drivers and Quicktime support to the latest versions. (NVIDIA version 260.99). I have both a 9400 GT and an 8400 GS installed, to support multiple monitors. They both use the same driver. The PRE 9 organizer will run, but as soon as I create or load a project it quickly crashes.
On a long shot I disabled the 8400 GS card in the Device Manager and now I can run PRE 9. Of course this means giving up one of my monitors. Any other ideas?

Over in the Premiere Pro area (or maybe it was in the Hardware section... didn't pay a lot of attention 'cause it really didn't matter to me) I read a message about using two nVidia cards with no problems (other than no dual-card SLI support)
I **think** that was with two SAME model nVidia cards
And, of course, PPro is completely different code, so PreEl may simply not work with two nVidia cards

GPIB communication with GPIB (NI PCMCIA-GPIB)card in Visual Basic

I have a old program in Visual Basic which works fine in windows 98 using the desktop, but using my laptop with windows 2000 on it and NI PCMCIA-GPIB card it fails to communicate and running the program does not recognize the sendIFC command. I am new to VB, so can someone tell me what am I missing here. thanks

Hello,
Is the PCMCIA card recognized by the NI-488.2 driver on your laptop? Are you able to communicate from Measurement and Automation with your instrument? What do you mean it does not recognize the sendIFC command? Does Visual Basic give you a runtime or a compile time error? Are you using the latest version of the driver? (Usually 2.1 unless you're on 95 or NT with your card)
You can try out the Visual Basic language examples in the 488.2 directory under Languages as these will let you know whether or not the driver is installed correctly.
Let me know if you need more assistance by replying here.
Scott B.
Applications Engineer
National Instruments

PCMCIA Network card for public network

Hi All
I am going to setup Oracle RAC on my laptops and would like to use PCMCIA netwrok card as public network, but I am wondering if it there would be any issue at all.
Could anybody advise please.
Thanks
Soheil

Soheil,
Just by adding more memory to your machine you can install RAC on your machine.You dont need two laptops.
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
Hope it helps

Differences between NI PCMCIA GPIB cards

I have a PCMCIA-GPIB+ card , part # 182826B-01
Q1 - Is this a 16-bit interface?
Q2 - Are the newer PCMCIA NI cards 32 bit?
Since some of the expresscard adapters only support 32bit PCMCIA cards, these are important questions.
Thanks

For all those wishing to use their 16 bit pcmcia gpib card in Express card slots, I have verified that the following vendor's card works beautifully without any new drivers.
Please search for ExpressCard 34 to PCMCIA PC CardBus 16/32-bit Read-Writer Express2PCC.
http://www.synchrotech.com/products-expc/expresscard-pcmcia-pc_cardbus_express2pcc_01.html

Multiple X1900XT video cards?

Can someone tell me whether it is possible to run multiple X1900XT video cards in the Mac Pro? I understand that there's only one double-wide slot, so mechanically, plugging in a second X1900XT would obstruct an additional PCIe slot. The question is whether OSX will support more than one X1900XT.
Thanx - Andy

You can put X1900XT video cards in slots 1 and 2. The second board will cover slot 3, but there is enough power to run a 7300 in slot 4. Set the bus to x8 x8 x1 x8.

Kernel panic with PCMCIA wireless cards.

UDEV throws a kernel panic when I insert either of two wireless PCMCIA wireless cards.
UDEV version 106 and the latest kernel 2.6.20. Both wireless cards worked just fine previously
so I'm sure it's a problem caused by upgrading.
Has anyone else experienced this problem with PCMCIA cards?
-A

Seems about rite but my system works foro some time and then at some random point freezes... guess it could be the same issue tho.
So its out of arch dev hands and needs a kernel update? Am i right to assume that next time kernel updates its the right time to try 20 series again?
Yeah im drunk, tried to check for typing tho ^^

Looking for PCMCIA network card

I installed Solaris 8 on my laptop(Compaq Presario 1275),
and am looking for PCMCIA network card to configure
networks. Does anyone have Solaris 8 installed on
laptops and configured networks? If yes, what kind of
PCMCIA network card do you have for your laptop?
I plan to purchase a PCMCIA network card for my laptop?
Any recommendation, vendor, model name?
Thanks,

Soheil,
Just by adding more memory to your machine you can install RAC on your machine.You dont need two laptops.
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
Hope it helps

Pcmcia ethernet card on compaq notebook

Hi can any one tell which Pcmcia ehrnet card supports for solaris x86 intel on notebook .....
I am using compaq presario1200 notebook and had netgearpc card which is not working with solaris 8
appreciated for the help

I finally got PCMCIA to work. But it was a battle.
My ethernet card DLINK DFE-690 TXD will NOT work with Arch 0.7. (It does work when using the Arch 0.7 Installation CD but after installation, it does not work).
I tried everything. (e.g. disabling almost everything in rc.conf and the config scripts). I even tried manually inserting the modules using modprobe. And then running dhcpcd. But dhcpcd failed since the ethernet PCMCIA card was "BUSY".
I found the BUG! The problem is with the 2.6.10 kernel that the arch 0.7 CD installs. In other words, the stock IDE or SCSI kernels that come with the 0.7 installation CD's are buggy.
I reinstalled arch usng FTP install. (arch 0.7.1 is then installed with a newer kernel 2.6.13). Arch 0.7.1 was able to properly detect and setup my PCMCIA card and get networking going.
I did NOT enable the pcmcia or hotplug daemons in rc.conf. You do NOT need to. They automatically get set up in the loadng modules stage (where some auto detection is being done).
So if anyone else is having problems, just use the FTP installation which installs arch 0.7.1 and a newer kernel 2.6.13.
Rob

PowerBook 1400 and PCMCIA Ethernet card

I have some problems to find out list of supported PCMCIA Ethernet cards by MacOS 7 (B1-7.5.3) on PowerBook 1400. I would be very please to receive driver for 3Com OfficeConnect 572B what I own. Is it available?
regards,

Hi,
A quick Google search indicates that 3Com XJAEM3336 Mac drivers were available for at least some PowerBook computers. However, it is unclear to me whether the files here are needed, appropriate or sufficient in your case. Perhaps you could look further into this.
If you cannot locate a suitable Ethernet PC Card with Mac drivers, another solution could possibly be to use a 16-bit wireless card (typically, 802.11b speed and WEP security). See, for example, this web page.
Jan

Can you simultaneous sample multiple SCXI-1520 cards in multiplexed mode?

Can you simultaneous sample multiple SCXI-1520 cards in multiplexed mode?
In parallel mode, you can have all channels sampled and held, and then have each
of your E or M series cards multiplex through each of the 8 channels of each card.
This yields simultaneous sampling on all channels at a faster rate in this "SCXI-1520
Parallel Mode" than you can derive from the "SCXI-1520 Multiplexed Mode."
Does the "SCXI-1520 Multiplexed Mode" also provide the capability to Simultaneous
Sample and Hold, all be it at a slower net throughput yield then the "SCXI-1520 Multiplexed Mode?"

Hello,
Thank you for posting to the NI Forums! The SCXI-1520 User Manual does indicate the Simultaneous Sample and Hold can be used with Multiplexed Mode. Please refer to the last two paragraphs of page 69 and the first paragraph of page 70 for a better explanation. Hope this helps! Let me know if you have further questions!
Message Edited by Margaret F. on 04-21-2009 05:25 PM
Regards,
Margaret Barrett
National Instruments
Applications Engineer
Digital Multimeters and LCR Meters

I am searching a VI for AC acquisition with a PCMCIA DAQ card 6024E

Hi,
I am searching a VI for Alternativ Current acquisition with a PCMCIA DAQ card 6024E.
I have tried several availble examples but they are unfortunately not compatible with this card.
I am a beginner with Labview, as a consequence any help and support on that topic would be really appreciated.
Thanks,
Alban Cotard.

I think you wann measure Alternating Current?!?
what want you know, the period, amplitude, rms.....?
e.g. use the "cycle average and rms.vi" or other VI in this palett
regards timo

Communication with PCMCIA-modem card

Hi there,
I have to extend my LabVIEW driven sensor system with a PCMCIA-modem
card (actually a GSM-card) so that my setup can transmit data
automatically via GSM under special circumstances.
Can anyone help me how to communicate with the modem-card and how to use
the AT-commands in LV?
Thanks a lot.
Markus

If a commercial solution is an option, you might consider contacting some of the
NI Alliance Members. I know of one that has a product called "ModemNOW!" that
I've heard good things about. Check out their page on the NI Solutions
Directory page (sorry for the lengthy URL, the company is named Microsys):
http://digital.natinst.com/alliance.nsf/b7d49ea02c8aa32c8625642f007e2ba6/af281fa53d7c4c47862562ca004b5ae2?OpenDocument
There are others out there. Another good site is the VI Market one:
http://vimarket.com/
I haven't run across any particularly complete or general-purpose examples for
modem communications internally at NI.
--John Lum
National Instruments
Markus Buchner wrote:
> GSM means Global System for Mobile Telecommunications. So the problem
is how
> to set up a wireless data connection with LV.
>
> Labview User Name wrote:
>
> > What is GSM?
> >
> > I have used ethernet cards for remote operations with Labview on numerous
> > occasions.
> >
> > It works great and is too easy to program.
> >

PCMCIA-GPIB Card with Linux ?

We would like to run LabVIEW + PCMCIA GPIB Card Ni-488.2 on a laptop under Linux. I know LabView provides a linux version, but we would need an appropriate driver for the PCMCIA-card. I found hints on a PCI-GPIB driver, but not for the PCMCIA version. Is there something available? We are currently running SuSE 7.0 on the laptop, but it would be no problem to switch to RH 7.1.

It is surprising to see that after all these years of expertise from NI, there is currently no way to have GPIB running on a Linux laptop.
NI provides no drivers for the two possible laptop solutions: USB or PCMCIA.
Given the widespread use of Linux in research labs, such a lack of support is rather disappointing. I can't imaging that writing such a driver would be more work than a computer science student project.
At least the basic communication/read/write functionalities with no polling and handshakes
Sincerely,
T. Misaridis, Ph.D

Multiple PCMCIA GPBIB cards

Similar Messages

Maybe you are looking for