Multiple plants with same excise registration

I have 8 different manufacturing facilities/locations inside the same campus. Due to business requirement I have to make each of these manufacturing locations as plants. But, this campus/location is given only one Excise Registration by Govt. This company is maintaining only single set of excise books like RG23 registers, etc not as per each manufacturing locations.
*_My question is:*_
1.Can I assign multiple plants to the same Excise Registration in
SPROLogistics u2013 GeneralTax on Goods MovementsIndiaBasic SettingsMaintain Plant Settings
Will there be any issue?
2. Do I have to make multiple excise group or single excise group for plants?

If your Plants / Depos are Excisable then you have to create Separate Excise Group & Series Group.It will help you to see Excise Registers as per the Plant's different Excise Group.
Best Regards,
Ankur

Similar Messages

Read multiples files with same extension

how to read multiples files with same extension in java.
for ex : i would like to read all .DAT files from C drive using java.
How is it done

- You create the filter
- You get the list of files
- You open and read each file.
For the first two above you look at java.io.File and listFiles(FileFilter filter).
For the third you find whatever input stream is appropriate from java.io.*

Multiple accounts with same email

I have multiple accounts with same email
The one that has all my contacts is the one attached to FB but for some odd reason I can no longer access this specific account
When I try to reset my password, it only keeps asking me to change my FB password
Once I try logging in on Skype, it keeps asking my FB to connect to the other 2 Skype accounts, completely diffente usernames
I am only interested in the one that originally connected to my FB as it has all my contacts
As my other 2 accounts are my old Skype accounts and have my old contacts from years ago

Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

Multiple members with same alias

I have multiple members with same alias name. Are there anyway to build dimension members with same alias name?

Typically I will concatinate the member name (as either a prefix or suffix ) to the Alias to make it unique

Mounting multiple directories with same name on different severs to a single mount point on another server

We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree.

Multiple accounts with same email can't acces original account

ok, so i created a new skype. I was messing with skype account on my desktop and wound up unlinking and re linking the account basically i made 2 extra accounts and they have my live: random.namehere_1 and live: random.namehere_2 and i cant log into my original one anymore also when i try to do a recovery it says i have 2-3 skype accounts on my email and i cant log into my accounts by typing in the live:random.namehere and the password it just says ooops something went wrong basicallly saying the pw and account name are wrong when they arent i made sure of it. so how do i eliminate the cloned accounts and log into the main one.

Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

Restrict PO creation for multiple plants for same company code

Hi Gurus,
We want to restrict PO creation for multiple plants in the same company code. Based on Standard SAP settings for Purchasing organization assignment with multiple Plant and multiple Plant assignment with single company code, this is happening. Is there a way that we can restrict by doing some customization change.
Any thoughts or ideas will be highly appreciating.
Thanks and Best regards,
Karun Kumar

Hi,
Said functionality is not available in SAP standard.
To avoid the same ,i can suggest implement release strategy for PO,and then higher authority / commercial team can check created PO,if multiple plants available in single po then they have the option of rejection for the same.
Or else check BADI-ME_PROCESS_PO_CUST,take the help from abapor and apply the restriction to select multiple plant in PO.
Hope this will resolve your query,
Thanks & Regards,
Sandesh Sawant

Stock transfer between plants- 1 plant with no excise & 1 plant with excise

Dear Sir,
We have 6 plants working under SAP version 6.0 and in all the plants excise is applicable i.e. modvat can be taken. Now a new plant say X is coming up under the same company code in which excise modvat won't be applicable. In this scenaripo when we will do stock transfer from existing plants excise will be applicable on the material sent to plant X but at the time of receiving the material at plant X this excise amount must be inventorised on material as modvat is not applicable in this plant. Similarly when we despatch the material from plant X to other existing plants material cost will be with excise value.
Pl. guide me that how this scenario to be configuered.
Thanks in advance.
Rajiv

Hi Rajiv
<b>Only you need to do is</b>
In plant X which is not registered with excise, there you have no need to maintain excise related data of material master record i mean in J1id. So this will post your exsice amount to your inventory cost.
Secondly if material is sent from Plant X to excisable plant this plant X can not levi excise duty as its not regeisetered one.
Regards
Vivek
-- Reward if helful !!

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Podcast synching on multiple macs with same account

How do I get my podcasts to synch on multiple macs and therefore ipods with same itunes authorized account, ie the subscriptions I have on home computer don't show up on my work itunes account and therefore when I'ved watched flying one way, when I land I want to load the next set of episodes, but find the need to create entirely new subscriptions?
Thanks
george

I was able to resolve the problem using addMessageCountListener and messagesAdded method, as suggested by you.
I am now facing another problem. Whenever a new message is received, code inside messagesAdded method gets executed. Here I am trying to spawn another thread and do some stuff. But this new thread is not starting at all. It goes into some JavaMail:EventQueue and does nothing. What is the concept of EventQueue here? How can I get this new thread executed?
Also will there be synchronization problems in messagesAdded method. Say I received a message and I am processing it in the messagesAdded method. In the mean time another message comes up. How will this behave.

To create multiple files with same content but with different names

Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
Varma

What do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek.

How to create group bom for multiple plants with different company codes

Dear all,
In my current scenario we have 5 Company codes with a plant with each company. The same kind of materials exist in all the 5 plants, so what i want is when i create any BOM, that BOM has to extend in all the company codes, as with GROUP BOM i can able to extend the same in only one company code.
So how to do this?
Thanks in Advance
Bhushan

For that first extend all the materials to all the plants... In one plant create a BOM for the material..
In all other polants in CS01, click COpy from .. There you mention the matreial and the plant in which the BOm is alerady available..
karthick

Topic: Incorrect Tag:Multiple Attributes with Same Collection Type

I have an Object Type that contains multiple attributes with the same collection type. When I use OracleXML getXML to generate xml, the tag for all elements created for any of the matching types is the tag for the 1st of the similar attributes.
work_t_v is an object view of a relational schema
SQL> desc work_t_v
Name Null? Type
WORK_ID NUMBER(38)
TITLE_OF_WORK VARCHAR2(512)
MESH_HEADINGS MESH_HEADINGS_T
AUTHORS AUTHORS_T
COMMENT_ON WORK_REFERENCES_T
COMMENT_IN WORK_REFERENCES_T
ERRATUM_IN WORK_REFERENCES_T
REPUBLISHED_FROM WORK_REFERENCES_T
REPUBLISHED_IN WORK_REFERENCES_T
SQL> desc work_references_t
work_references_t TABLE OF WORK_REFERENCE_T
Name Null? Type
REFSOURCE VARCHAR2(255)
NOTE VARCHAR2(255)select
work.work_id,
work.title_of_work,
work.comment_on comment_on,
work.comment_in comment_in,
work.erratum_in erratum_in,
work.republished_from republished_from,
work.republished_in republished_in
from work_t_v work
where work_id = 99350984
results in tag of <comment_on> for all the elements built from the work_references_t type (i.e., there are no <comment_in>, <erratum_in>, <republished_from> or <republished_in> elements)
sample result is:
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentOn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [ErratumIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedFrom]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
The above xml should be:
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentOn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_IN>
<COMMENT_IN_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentIn]</REFSOURCE>
</COMMENT_IN_ITEM>
</ERRATUM_IN>
<COMMENT_ON>
<ERRATUM_IN_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [ErratumIn]</REFSOURCE>
</ERRATUM_IN_ITEM>
</ERRATUM_IN>
<REPUBLISHED_FROM>
<REPUBLISHED_FROM_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedFrom]</REFSOURCE>
</REPUBLISHED_FROM_ITEM>
</REPUBLISHED_FROM>
<REPUBLISHED_IN>
<REPUBLISHED_IN_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedIn]</REFSOURCE>
</REPUBLISHED_IN_ITEM>
</REPUBLISHED_IN>bracketed portion [] is contained within the refsource string to indicate what type of reference it should be displayed as.
I also found that if I use the -withDTD parameter to include the dtd, the dtd includes the appropriate elements (comment_in, erratum_in, republished_from and republished_in). However, it incorrectly defines refsource and note multiple times (once for each WORK_REFERENCES_T attribute).
Are these known problems? Will they be fixed? I'm more concerned about the XML problem than the DTD problem.
Thanks! -- John Butler
null

Using the version of XML SQL Utility that comes with the next XSQL Servlet release 0.9.8.6 I did the following:
create type foo as object (a number);
create type foolist as table of foo;
create view fooview
as select
cast(multiset(
select sal from emp where rownum < 2)
as foolist) list1,
cast(multiset(
select sal from emp where rownum < 2)
as foolist) list2
from dual;
When I request a "SELECT * FROM FOOVIEW"
through getXML I get:
<?xml version="1.0"?>
<ROWSET>
<ROW num="1">
<LIST1>
<LIST1_ITEM>
<A>800</A>
</LIST1_ITEM>
</LIST1>
<LIST2>
<LIST2_ITEM>
<A>800</A>
</LIST2_ITEM>
</LIST2>
</ROW>
</ROWSET>
So this appears fixed in the next code drop.
In the interim, I'll email you the new JAR file until (since it won't be on OTN for a few more days).
null

Incorrect Tag:Multiple Attributes with Same Collection Type

I have an Object Type that contains multiple attributes with the
same collection type. When I use OracleXML getXML to generate
xml, the tag for all elements created for any of the matching
types is the tag for the 1st of the similar attributes.
work_t_v is an object view of a relational schema
SQL> desc work_t_v
Name Null? Type
WORK_ID NUMBER(38)
TITLE_OF_WORK VARCHAR2(512)
MESH_HEADINGS MESH_HEADINGS_T
AUTHORS AUTHORS_T
COMMENT_ON WORK_REFERENCES_T
COMMENT_IN WORK_REFERENCES_T
ERRATUM_IN WORK_REFERENCES_T
REPUBLISHED_FROM WORK_REFERENCES_T
REPUBLISHED_IN WORK_REFERENCES_T
SQL> desc work_references_t
work_references_t TABLE OF WORK_REFERENCE_T
Name Null? Type
REFSOURCE VARCHAR2(255)
NOTE VARCHAR2(255)
select
work.work_id,
work.title_of_work,
work.comment_on comment_on,
work.comment_in comment_in,
work.erratum_in erratum_in,
work.republished_from republished_from,
work.republished_in republished_in
from work_t_v work
where work_id = 99350984
results in tag of <comment_on> for all the elements built from
the work_references_t type (i.e., there are no <comment_in>,
<erratum_in>, <republished_from> or <republished_in> elements)
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[CommentOn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[CommentIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[ErratumIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[RepublishedFrom]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[RepublishedIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
bracketed portion [] is contained within the refsource string to
indicate what type of reference it should be displayed as.
I also found that if I use the -withDTD parameter to include the
dtd, the dtd includes the appropriate elements (comment_in,
erratum_in, republished_from and republished_in). However, it
incorrectly defines refsource and note multiple times (once for
each WORK_REFERENCES_T attribute).
Are these known problems? Will they be fixed? I'm more
concerned about the XML problem than the DTD problem.
Thanks! -- John Butler
null

Using the version of XML SQL Utility that comes with the next XSQL Servlet release 0.9.8.6 I did the following:
create type foo as object (a number);
create type foolist as table of foo;
create view fooview
as select
cast(multiset(
select sal from emp where rownum < 2)
as foolist) list1,
cast(multiset(
select sal from emp where rownum < 2)
as foolist) list2
from dual;
When I request a "SELECT * FROM FOOVIEW"
through getXML I get:
<?xml version="1.0"?>
<ROWSET>
<ROW num="1">
<LIST1>
<LIST1_ITEM>
<A>800</A>
</LIST1_ITEM>
</LIST1>
<LIST2>
<LIST2_ITEM>
<A>800</A>
</LIST2_ITEM>
</LIST2>
</ROW>
</ROWSET>
So this appears fixed in the next code drop.
In the interim, I'll email you the new JAR file until (since it won't be on OTN for a few more days).
null

Multiple Servers with same Remote Interface?

Is it possible to declare the same remote interface on multiple RMI servers? Secondly, is it possible to pick which RMI server will manage a particular request?
In other words, imagine if multiple servers could service a particular request that has the same signature, but the client wants to specify which server to send the invocation. An example would be the following:
public String getPhoneNumber(String pLastName) ;But the client should decide that server A should manage requests of last names starting with A-G, server B should handle H-P, and server C should handle Q-Z. The remote method invocation is the same, but the server upon which is should be invoked needs to be determined at runtime.
I realize this can be done multiple ways, with an interim proxy server that designates the server. However, I'm most interested in the ability within the RMI and/or JNDI standard to select and invoke methods on a particular server.
Thanks for any help.

"Server" is a little bit vague in this context.
My assumption is that you want separate RMI servers running on separate hosts. (Otherwise, why bother with multiple "servers"?)
That being said, it's not clear to me how you would expect RMI to sort out something as application-specific as you suggest. It sounds to me like you need your own registry/redirector. This is going to either be an rmiregistry rewrite by you, or - as was suggested by another poster - a proxy.

Multiple plants with same excise registration

Similar Messages

Maybe you are looking for