Multiple po's against one PR

Hi all,
        Is it possible to create more than po's for one Purchase requisition?If so,will it allow us to post GR against both PO's?
Waiting for your reply
regards,
Mona

Hi Mona,
Practically in business you may need to have more than one PO for a single PR because of various reasons one may be PR may be there for 10,000 pcs & it is a consumption of 3 months where i release PO on monthly basis, for this reason SAP allows to have multiple PO.
If you want to control this one way is to make qty field supress & create PO with respect to PR, but this is not wise to do. if at all you have a requirement like this you can do it, so that PO qty is not modifiable.
Regards

Similar Messages

  • Removing Multiple Skype Accounts against one ID ?

    Hi , I need to get the procedure to remove multiple accounts generated against one email ID?

    After 2 hours worth of searching with no answer, I decided to run a test and it worked. This is what I did to have multiple Game Center IDs on iOS7. (People responding may have over looked this detail because they assumed it was obvious, but it wasn't)
    Answer: you MUST have multiple Apple ID accounts, however, you use the main one to log in to SETTINGS > ITUNES & APP STORE.
    1. I deleted the Alternate Email Address associated with my account
    2. I created an entire new Apple ID with this email address
    3. I login in to SETTINGS > ITUNES & APP STORE with my original Apple ID (credit card on file)
    4. I login to Game Center, iCloud, etc... with my kid's NEW Apple ID
    So purchasing still goes under our shared account and game center, iCloud, etc... go under my kid's Apple ID.
    ^ ^ ^ ^ This is the simple straight forward answer I was looking for ^ ^ ^ ^

  • Multiple Quotation lines against one PR/PRF item

    Hi,
    I want to address projects related senario in which during PR creation only high level details of a product is known e.g. Substation is to be procured. So RFQ is also floated for Substation (only one line item in PR/RFQ). Now when vendor sends the quotation it contains many line items because he will enter all details line transformers, coolers in the quotation.So in quotation maintenance we should add all the lines against only one RFQ item.Also purchase order also should contain all those line items and goods receipt should be possible for all single line items separately. Total cost should go in main line item i.e. Substation.
    Please help me addressing this senario
    Regards

    Hello,
    Actually we are picking based on full pallets/partial pallet (LE quantities) and if multiple partial picks for the same material in same outbound delivery then system proposes partial pallets, which is just wastage of time to consolidating again rather 'sum it up' total quantity of same material and pick the maximum full pallets as it going to same customer...
    Whole thing triggered up, when multiple back orders with partial quantities and putting together in the delivery (as and when the material is available...) and then TO creation/picking...
    regards,
    JPS

  • Can I create multiple presentation templates against one content item?

    I want to create multiple presentation templates that publish the same content item in different ways.
    As far as I can tell from the publisher GUI this is not possible.
    Am I missing something?

    It may not be feasible to have two PT associated with a DT technically. But there is a workaround / solution for your requirement. thats what i meant in my prev post.
    To accomplish your requirement in a simple fashion try doing this
    1) copy the contents of all PT, DT and Content Items with all its folders in the _NEWS (portlet templates) folder to a new folder called 'PortletA' (or) make use of the News portlet template to create a portlet
    2) Now modify the DT's and PT's according to your requirement.
    3) Create a portlet using "Published Content" webservice and configure the 'Main' to your portlet.
    4) if you create and pblish new article, you can find two html's are getting published.
    If this doesn't resolve your requirement,
    Create two sets of Dt & Pt's. In the article PT, try to add the other Pt as "related items to publish", so on publishing one the other one gets published.
    Bharat Karthik
    [email protected]
    http://www.eminenttech.com/
    Edited by bharatkarthik at 09/05/2007 2:35 PM

  • FF68 - Manual Check Deposit - entering multiple invoices against one check

    We are requiring the functionality to enter multiple invoice numbers into the layout against one customer and one check payment to then allow these to be cleared as part of the batch processing.
    Currently it only appears to allow you to enter one invoice number per check payment or post on account to the customer and clear as a second manual step.
    Has anyone implemented the multiple invoice clearing from one check within FF68?

    Hi Sonia
    Was BDC session generated on processing FF68?
    Auro

  • Multiple Digital Signatures on one PDF file

    I have been trying to establish a means of allocating multiple signatures against one PDF file so as to have several people approve a issued document or documents. When ever I try it I find that the latest approval makes the previous one obsolete. I expect there is a simple solution to the problem.

    The only thing I've found is the 3rd party program solution. CoSign is the name of the product I see most often referenced. Mind you, I am looking on behalf of my users/customers who have documents with multiple signatures they've saved inthe past, but cannot do it today. It appears that either Microsoft (these are Excel and Word documents they are referring to) produced a security update that changed this, or a 3rd party program is no longer effectively working.
    For reference, I've been actively searching the internet for days for an answer - unfortunately, I've only found 3rd party programs referenced. Which I could have been more help.

  • Can multiple instance be in one physical professor?

    Can multiple instance be in one physical professor?If it can,how can I run multiple queries in this multiple instance?
    Any help would be very appreciated.
    Regards

    Let me see if I understood your requirement, you want to have several Oracle Instances on the same machine (processor) don't you. And you want to run a single query against this, it could be interpreted in a couple of ways, you may want to set up a RAC environment, and let oracle decide where it is going to run the query, or you could be talking about a distributied query, peforming a join against different tables located on different instances.
    Further clarification is required from your side.
    ~ Madrid

  • Multiple Order Linking with One PR

    Hi Experts,
    Is there any way where i can link Multiple Maintenance Order in one PR.This i need to track the services against each order through one PR PO.
    Regards,
    Kavvya

    HI kavya
    For your requirement you can creatre PR/PO independently with account assignment category F. After wards you create maint. order as per requirement & assign services from this PO to any operation by changing the control key to PM03 but change the reservation/purchase requisition indicator to never manually so that it doesnt trigger any PR from maint.order. after changing the control key, you select the operation & click external button below you will get service selection in which you select exter nal services from F4 list (you can select from the PO) & qty also. By this you will get planned cost of external service. Then you do service entry in ML81N with reference to PO & give maint order no & cost will flow to maint.order. You can link to multiple maint order by this. You consume external services of single PO in multiple maint. order.
    Shakti

  • TWO INVOICE CREATED AGAINST ONE DELIVERY T-CODE VF01

    Hi,
    I got strange scenario that against one delivery containing multiple line items two different  invoice created during normal sales process , First  invoice with some line item and another invoice contains rest of the item.
    Both the invoices is of same billing type.
    We want one invoice against the delivery.
    Help to resolve the problem
    Thanks in advance for your valuable time and effort
    Regards
    Praveen

    Hello,
    please run  VF03 to display one billing document, then by menu Environment > Split analysis it is possible to see the cause of the split.
    Best regards,
    Ivano.

  • Multiple Shipment cost against single shipment doc

    Dear Gurus,
    We have a scenario in Transportation process.
    We are sending a shipment which contains three delivery docs each contains 100 qty, so total 300 qty.
    There are three invoices invloves in  this shipment against each delivery doc. This shipment goes to the Transporter's warehouse and the inward happens one by one invoice basis as per the cutomer's request. Say, when the customer inwards the first delivery transporter will submit his first freight bill to us. we clear that bill,  then next bill...so on..
    Here from one shipment document multiple shipment costs need to be created. Is this possible? If not what could be the soultion for this issue?
    Pls suggest. thanks in advance.
    (P.S:  I have referred this thread which is very similar to my req.
    Re: Multiple cost documents for one shipment doc , any other suggestions)
    Reg,
    JJ

    Dear Lakshmipathi ji,
    Thankx a lot for ur reply and giving some more light . However, My requiremnt is not to create multiple shipment documents in VT01N against one delivery and not all the customers have the web site updation on GRN details but ofcourse some of them.
    I have two issues here..
    1. My client sends a consignement which contains multiple deliveries each belongs to deifferent Routes thru' a transporter. For the transporter it's like a collection point. He collects the goods and takes to his place further distributing the goods to the respective destination. (like a courier agent).
    2.As i xplained before, as per the GRN of the customer basis they pay the frieght bills (weekly) . It happens for a whole delivery or invoice qty only.
    How to address this? Is this a only way to create one to one basis of shipment & delivery doc?
    Pls suggest.
    Reg,
    JJ
    Edited by: Jagsap on Dec 10, 2010 10:02 AM

  • Multiple POs Receipt against a single Receipt as per Supplier Invoice

    Dear All,
    We were using the ERS (Autoinvoice) for suppliers.
    We have a special scenario:
    We send PO to Supplier. and the Supplier send the Goods for Multiple POs in a Single Supplier Invoice.
    The Issue is:
    Can we receive all the Supplier Invoice items (belonging to different POs) in a single receipt. So that we can generate one invoice through ERS, which can be matched against the Supplier invoice.
    Is this possible? If Yes, How can we accomplish this..?
    Please update....
    Many thanks in advance....

    Hi Jeyakanthan,
    Thanks for the reply.
    I have gone thru the "Multiple Goods Receipts for a Single Excise Invoice " in Sap Help Documentation, what I have understood is that we can do multiple Goods Receipt against a Single Invoice. Here in this case we do the Goods Receipt against Purchase Order , do the Invoice Capture for first goods receipt againts Purchase Order and we enter the Invoice Number (say 745, sent by the Vendor) while capturing excise invoice. When the second shipment (against the same PO) comes, we do goods receipt and we refer the "Only Refer Excise Invoice" while doing the goods receipt. Finally after when we have entered all the shipments for the PO, we do the Excise Posting.
    Here in our case we have already posted the Goods Receipt (without entering the Invoice Number in first goods receipt) and now we want to capture & post excise invoice for a Single Excise Invoice (Invoice No. say 745,).
    Please correct me if my understanding is wrong.
    Here we have got two options:
    a. Reverse all the goods receipt & re-enter the goods receipt .
    b. post two separate excise invoice against each goods receipt mentioning dummy excise invoice number like 745-A & 745-B.
    Option a seems difficulty as we will have to reverse all the subsequent goods receipt & transfer posting documents.
    Option b seems legally wrong, as per understanding.
    Request you to please advise.
    Regards
    PK

  • COPA - Multiple Sales Order with one wbs element.  COPA does not reference

    COPA - Multiple Sales Order with one wbs element.  COPA does not reference of reference of sales order.
    Hi All
    Currently we are in process of implementation of project related to Club Service for one of the client.
    Concept of this project is - there is "X" company engaged in supporting the different shared services for their client e.g. Client IBM - Shared Support Services of IBM is
    u2022     IDM
    u2022     Software Installation
    u2022     Help Desk
    u2022     Maintenance
    Co.. "X' is performing these services for IBM.    So for Co. "X" - IBM is one engagement. Like this way Co. X is performing such activities for many companies e.g. microsoft, HP, ABN AMRO etc.
    Objective - Get the consolidate report from COPA (Customer wise/services wise/sales order wise e.g. IBM/HelpDesk/10002/10).
    We propose a solution to create a project for each engagement and with WBS element. Each WBS element of different services e.g.
    Project IBM Inc.  100.100
    WBS Element    100.100.IDM 
    WBS Element    100.100.SoftIns
    WBS Element    100.100.HelpDesk
    WBS Element    100.100.Maintainance
    For this engagement (IBM), we are creating a sales order with line items (for services) and account assignment is WBS element.  In a sales order, there may be two lines for one services.   In a particular period, there are many such sales orders for this engagement... Milestone billing/period billing is used depending upon the services rendered.
    Now Cost Object will be WBS Element. So cost and revenue will posted to WBS and from this it goes to COPA.  In a month of May 2009 two - sales order is booked with three different line items with account assignment is WBS element.
    Sales Order Line Item No.....Item                  Account Assignment                      Revenue
    10000          100     IDM      100.100.IDM              1000
    10000          200     HELPDESK      100.100.HelpDesk              2000
    10000          100     Maintenance      100.100.Maintainance         3000
    Another Sales order booked with two different line items
    10000          100      IDM     100.100.IDM          3000
    10000          200      HELPDESK     100.100.HelpDesk          4000
    Cost will be booked directly against WBS element.
    In sales order level, there is no profitability segment, as cost object is WBS element.
    Billing, revenue will be posted directly to wbs element, from this revenue and cost of sales goes to COPA.
    Now in COPA,
    1.There is only one line for WBS element ex. 100.100.IDM with revenue 4000 (combing both the sales order)
    2.There is only one line for WBS element ex. 100.100.HelpDesk with revenue 6000 (combing both the sales order)
    3.There is only one line for WBS element ex. 100.100.Maintainance with revenue 4000
    In above case 1 & 2 we will not have reference of sales order and sales order line item in COPA table. There is only one line for this.  So we can not have reporting to sales order level.
    Is there any way by this the reference of sales order and sales order line will come in COPA for case 1 & 2.
    Please help in this issue.
    Regards
    Abhay Dev
    Ph:- 91-22-67782229
    Cell:- 91-9819175185

    Hi,
    For these case (multiple materials with different characteristics); have you consider going to next level of WBS Elements. Meaning; lets say currently you are assigning WBS "Engineering (which is a level 2 WBS)" to all the items in SO. Instead under "Engineering" create 2 or 3 level 3 WBS Elements as E1, E2 etc and assign them 1:1 to your sales order line items. This would eliminate the exit as welll as complex development option. And also will let you get all the data in COPA and in turn you can pull to BW as well for reporting. Just a thought.
    Regards
    Sreekanth

  • HT204053 I have multiple family members using one apple id account and all of each others information is going onto each others phones/how do i stop this?

    I have multiple family members using one apple id and all of our data is going onto each others phones/how do i stop this?

    Each person needs to have their own separate Apple ID along with their own separate computer user account and iTunes Library.

  • Multiple iPad sync on one computer fail

    I am confused about how to maintain two iPads on one computer.  Try it and I get dialog boxes threatening to erase all the content on one iPad.  Do I creat multiple libraries? That seems risky in light of the "threat" message in the dialog boxes. Is there a simpler way. Why can't I just plug iPad #1 and iPad #2 into a computer and have iTunes recognize that each one should have a separate library? This seems really silly.

    Hello there, OC Reporter.
    The following Knowledge Base article addresses just how to manage multiple iOS devices with one computer:
    How to use multiple iPhone, iPad, or iPod devices with one computer
    http://support.apple.com/kb/HT1495
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do I manage multiple Iphone accounts on one computer

    My wife desperaely needed to back up her iPhone (been over teo years).  I didn't want to do this given that she woulde lose two years worth of data, but we decided to plow ahead.  I hit the update button and was advised that there was an earlier backup from last fall.  I said I wated to use that back up.  Unfortunately it was a backup for my daughter's iphone 5c and now my wife's phone is simply a clone of the 5C.  What can I do to pul at least some of her account information back out and show her iPhone again on the devices list?

    It certainly is possible.
    How to use multiple iOS devices with one computer
    A single computer can be authorized for multiple iTunes accounts but only one account can be signed into the store at a time.
    Frankly, you are better off with unique Windows User accounts for each user.

Maybe you are looking for