Multiple PO's for a PR

Hi all,
I have a scenario in which there is a Purchase Requisition created from a maintenance order. The PR has only one line item and that too with qty 1 only. I created a PO against this PR for qty 1. Again I created another PO for same PR for qty 1.
But when i am looking for the entry against PR in table EBAN i can see only the PO that was created latest. In EKPO as this PR is not a primary key, it takes a lot of time in returning the output.
Can anyone tell me if there is any other means available to get all the PO's created for a PR.
Regards

Hi
Please use table EKAB for your search instead of using EBAN Or EKKO
Thanks & Regards
Kishore

Similar Messages

How to create the multiple spool requests for a single report.

Hi gurus,
I have one requirement to be completed , i need to send the out put of the report via mail in pdf format. for that what i did was, iam executing report in background and creating spool request and converting it to pdf and sending the file.
now the problem is, its a customer ledger report, for each customer i need to create a new spool request and send mail to that particular customer, now my dought is how to create multiple spool requests for a single pro and how i need to go about it.
And one more question is can we create a spool request for a report which is running in online.
waiting for inputs frm gurus.

Hello,
As per my knowledge for creating new spool id you will have to set
output_options-tdnewid = 'X'.
and then using
job_output_info-spoolids
create a pdf using
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Rachana.

Unable to enter multiple Schedule lines for BOM material in Sales Order

Hi All,
We have a Sales Order where in which we cannot add additional schedule lines for BOM material.
The schedule lines are greyed out, user was able to add schedule lines earlier.
I have checked all assignments in VOV6, VOV7 and everything seems to be fine and no changes have been made to item category being used.
Please provide a solution for this.
PFB link in which similar situation posted in this community but the final resolution method is not discussed.
http://scn.sap.com/message/13201504#13201504
Regards,
Samiksh

Hi Samiksh,
Pls check for that particular customer, only complete delivery allowed(c) is set in the CMR or CMIR. If so, you can't enter multiple schedule lines for that customer.. it would be grayed out in the sales order schedule lines except confirmed line.
or check the problematic sales order at item level shipping tab if the par del/item is set to 'C'
With regards
S.Siva

Multiple select options for an input field

Hi All,
We have a requirement where in we need to provide multiple select options for an input field in a BSP application and get output relevant to all the given inputs(do not require range).
Please do let me know how to solve this.
Thanks & Regards,
Lavanya .

Hi,
The requirement is : Suppose there is a input field PLANT.
If we give input for plant it gives related output.
Now if it is required to give 5 or 6 inputs..like plant1,plant2...plant6 and get the output related to all 6 inputs.
(Like we implement in ABAP)
Please do let me know how can this be implemented in BSP.
Thanks & Regards,
Lavanya.

How do I enter multiple email addresses for a Firefox Sync account?

How do I enter my multiple email addresses for one Firefox Sync account?

Sorry, but Address Book does not allow you to select more than one email address to send to in a group. There's really no reason why people need multiple copies of a message, anyway; they have the option of forwarding email to another email address of theirs.
Mulder

How to have multiple preference files for Mail on one computer

I would like to have multiple preference files for Mail on one computer, one copy for each person in the organization. I want everybody to log in as the same user. Is this possible?
Thanks,
John Link
Cube, 450 MHz, 640 MB Mac OS X (10.3.9)

Since the Mail.app preference file (along with all other application preference files for a user account) is stored in that user's Home folder/directory, I don't believe this is possible.

HT204053 how can i create multiple icloud accounts for my family members

how can i create multiple icloud accounts for my family members

Thanks... I appreciate the reply. Since I wrote the previous email, I actually went and changed my apple id (the main id) and the documentation I looked at said iCloud will set mail up automatically(?)... I had it working before.
Also, I tried to manually set up the ID via the Mail Accounts screen(s) and I can't figure out what my server information is... Pop or Imap? What's the outgoing server and the incoming server?
I typically have never had problems setting up mail accounts (in apple mail) with no problem.
Can anyone point me in the right direction?
Thanks in advance!

How can i set up multiple user accounts for my new ipad mini?

How can i set up multiple user accounts for my new ipad mini?

The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

IOS 8 - iCloud Keychain with Multiple Login Accounts for a Site

I use iCloud Keychain to store multiple login accounts for a single website.
When using Safari on a Mac, the last login account I used for that site is prepopulated in yellow fields. If I want to change the login account, I clear the field with the login ID and I see a dropdown of all of the login accounts available for that site.
When using Safari on iOS 7, the last login account I used is prepopulated (just like with the Mac), but if I want to use a different login account, I need to enter enough characters in the login ID field for Safari to know which login account I want to use and then it autofills using that account.
Now, with iOS 8, all I get is the last login account I used. I can't figure out how to autofill any of my other login accounts for that site.
I'm pretty sure I'm doing something wrong, but I can't figure it out. Any suggestions would be appreciated.
Thanks.
Mike

Mike:
Did you ever find a solution for this? I just noticed the same behavior.
-emde

How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?

Hi All,
Hope to you a very happy new year,
I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
So my quetion is below:
How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
Thanks in Advanced,
Ahmed,

To add to Scott's post. Option 60 would be useful if you needed to put certain types of AP on specific controllers. Otherwise, no real need to use it for the most part.
Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
Now, on an IOS switch, you can only configure one option 60 per DHCP scope
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left.

This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left of each drop down.

See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

Multiple Ipod users for one computer

How do you set up Itunes for 2 Ipods running through one computer/Itunes?
Thanks!

If both iPods have all the same music in their iTunes libraries (or if they're using the exact same iTunes Library) and both have the option selected to Sync All Selected Songs ... then they'll both have everything on them.
If you go by the two user accounts method, make sure the iPod is set to sync only selected songs/videos/etc, and then that ONLY the songs, etc, they want are selected.
If you use the playlists method, make sure that each iPod is set up to sync only the playlists they want. Personally, I'm using the playlist method for my two iPods. The other iPod's in the house use yet another method that is much more complicated and involves creating multiple iTunes libraries for the same account.
To answer the question of the "Privaledges" question, I think you were trying to go by the two accounts method. If so, the account installing iTunes has to have Administration rights. But once it's installed once, you can RUN it from multiple accounts without installing it again. Just browse to the iTunes.exe file and run it in the other account. When it runs, iTunes will probably load with an empty Library.
This happens because iTunes just created a new library file in the new account's "My Music\iTunes\" folder. That's a good thing. Then if you go to iTunes Preferences and change the location of the iTunes library to where all the music is, and let iTunes manage your music folders, it will add everything to the new library file.
Now, both accounts have the exact same files added to their independent Libraries. From here, they can Un-click or delete the songs they don't want in their library--just make sure to let the users/kids know NOT to Click "Move to the Recycle Bin". That will delete the file so that neither account can access it. When they delete files the other user may want, they'll have to select "Keep File(s)".
But then, they should have their own private music libraries WITHOUT actually having the music stored in two separate locations, possibly making lots of duplicates and wasting hard drive space. I'm pretty sure in both Windows XP and Windows Vista you can change the permissions of user accounts to where they CAN'T delete files, and that may actually be something you'll want to try if you think they'll just end up deleting each other's music permanently.

Can you run multiple APEX listeners for different instances on the same server

Please confirm that we can run multiple APEX listeners for different instances on the same server? Is it an xml setup configuration or do we need to do more??
Thank You,
Tony Miller
SmartDog Services
Austin, TX

Yes.. Just exactly what I was looking for...
Thanks Jari!!
Thank You,
Tony Miller
SmartDog Services
Austin, TX

Can I have multiple iTunes accounts for the same Ipod?

Can I have multiple iTunes accounts for the same Ipod? What I mean is can I use multiple iTunes accounts through the same iPod for buying stuff?

I believe you're limited to syncing DRM'd items from 5 different accounts.
tt2

How do I make multiple text bold, for example scene headings or character names?

How do I make multiple text bold, for example scene headings or character names?

You can do that by editing the template of the document.
Open the document, go to Edit->Template. A dialog will launch which will have element types on the left and it's properties on the right.
Select Scene Heading(or Character name) on the left. On the right, go to 'Text' tab and click on Bold checkbox.
Press OK.
Hope this helps.
Cheers,
Sunny

Broadcasting via Bursting to multiple email address for a single vendor cod

Hello -
I have a requirement to broadcast out a web template based scorecard to multiple email addresses for a given vendor code. We have gotten it to work via a single email address, but I need to send it to more than one email per vendor code.
Has anyone else tried this?
Thank you!

Hi Chris,
If my understanding is right, you must be using the master data of vendor Code(Which has an attribute to store Email IDs).
You can add multiple email ID to the same master data separated by semi colon ";"
If you are using user IDs instead, I dont think it is possible to use multiple user ID in the same attribute.
in this case you need to enhance the master data with a new attribute to store the second user ID and the create a separate setting for this attribute.
Hope this helps.
Regards.
Shafi.

Multiple PO's for a PR

Similar Messages

Maybe you are looking for