Multiple PR for Activity

Hello All,
My client wants to do a planning for quantities of material in a project but wants to create multiple PRs for that activity or material.
E.g. they require 5000 tonnes of steel for the entire project spread across 3 years,
But they would require about 50 tonnes in a months time, another 100 tonnes in another 3 months, etc.
So they want to raise multiple PRs for this.
Also the steel prices are not constant, hence we cannot create just 1 PO with delivery schedule.
Request your help to approach this issue.
Thanks & Regards,
Mangesh Kamat

Hi Abdul,
I think you can also create partial PO for same PR as per requirement.
is this possible?
Thanks
Sunil

Similar Messages

  • Multiple requests for activation and can't find *.joboptions

    Now sure what happened...but something trashed my Adobe Acrobat v8 Standard installation so I uninstalled Acrobat and re-installed the program from disk, Ver 8.0, I ran through a couple of upgrades to 8.1.3...
    Now when I boot up the the PC (Win XP w/all updates) I get this error message...
    Can't find: documents and settings/All Users/Application Data/Adobe/Adobe PDF/Settings/*.joboptions
    and I am continually asked (10+) to activate the program, which I do...
    I've run my registry cleanup program...still have these problems...
    Under Docs & settings/all users there isn't an Adobe PDF folder.
    I found it under my user application data along with several other folders:
    Acrobat, Adobe Acrobat, AIR, Flash Player, Linguistics, LongTransport2 -- there's also another folder named AdobeUM
    Frustrated and looking for help / Thanks

    Can you confirm you have verified your password via webmail?
    What error message do you get when entering the password in the Thunderbird password prompt?
    I'd be surprised if you can still receive mail without being prompted, when Thunderbird didn't save your password(s).

  • How to create multiple nodes for single activity in workflow.

    Hi Gurus,
    I am developing the PR workflow. and in that I want to create 2 different nodes for signle activity.
    how can I create those multiple outcomes for signel activity in workflow.
    Thanks in Advcance.
    Vinod

    Hi ,
    You can use Outcomes tab in your workflow step...
    What is the step... is it related to release...
    what is that you want to do...
    Regards
    Gautam

  • HT1495 Multiple ipads for classroom use how can I make them have the same apps?

    How do I sync multiple ipads for classroom use

    There is no bookmarks tab, expect you are referring to the bookmarks menu on the menu bar ("File, Edit, View, History, Bookmarks, Tools, Help") on your XP system.
    Once your restore your menus on you Window 7 system, you can get rid of the bookmarks button. After going through the 10 steps below your toolbars on your Windows 7 system will be more usable again and like your XP system, none of which has anything to do with Sync.
    You can make '''Firefox 6.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
    the first 9 steps above are basic toolbar customization the following link is in step #1 above. (See before/after picture (.png) in the footnote)
    *How do I customize the toolbars? | How to | Firefox Help
    *:https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>
    There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional.
    Before and after customizations, the following also includes [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4styles styling changes] besides rearranging toolbars and toolbar items.
    * http://dmcritchie.mvps.org/icons/fx4toolbars.png
    *:Bookmarks toolbar -- [http://userstyles.org/styles/46947 Bookmarks Toolbar Fx4 Blue/Folders, Red/Bookmarks]
    *:Tab borders -- [http://userstyles.org/styles/24728 Tab Color Underscoring active/read/unread (Fx3.6)] red=active tab, blue=read, green=unread, magenta(not shown)=loading

  • How to configure multiple domains in Active directory

    HI,
    How can I configure multiple domains on Active Directory. When I installed AD it asked for a domain name, there I gave ravigupta.com as domain name. But now I find no way of creating another domain.
    I am a java developer and my task is to write a programme which returns all the domains available in LDAP server.
    To start with ,I tried to create few domains in LDAP server ( AD ) but stuck up ,as i found there could exist only one domain.
    Please tell me how to configure multiple domains in LDAP server ( Active Directory).
    I skiped DNS configuration while AD installation.
    -ravi

    I'm sorry, but you should be asking on a different forum. This has nothing to do with Java.

  • Multiple Passphrases for a Single SSID ?

    We are getting ready to deploy a special SSID for handheld devices to be used on.
    Is there any way to have multiple passphrases for a single SSID ?  The reason I am looking at this is that we may have users who come into one of our offices and may not have gotten/received the email advising of the passphrase change.  My hope would be that we could implement Passphrase A when we initially deploy the new SSID and then in say 3 months, change the password.  We would like to leave the Passphrase A active for about a week which should be sufficient time for them to change it and then we could delete Passphrase A, leaving only Passphrase B active.  In WEP there was something like this but I dont see this as an option in WPA2.  Unfortunately with some of the devices that I have looked at, WPA2 Enterprise isnt an option, so that is why I am looking at things from this perspective.
    Any suggestions would be appreciated.
    Ron

    Hello Ronald,
    No you cannot have multiple passphrase or WPA-PresharedKey for the same SSID.
    Thank you,
    Serge

  • How do i get past "waiting for activation" on iphone 3 ?!?!

    i've been trying since last night to get it working. my cousin gave me her old iphone 3 to use as an itouch and i am trying to get imessage to work, but it won't stop saying "waiting for activation". i've tried everything, i've tried veryfying my email multiple times, turning it on and off, using a different email, made an icloud email. please help :/

    You need to have a SIM in the phone to activate it. The SIM does not need to be one that is currently active.

  • Multiple Payors for One Order Line item. Is it possible?

    Hello SD Gurus
    I am trying to see if SAP allows inputting multiple payors for each sales order line item? We have a requirements, where the net value at the line item level will be split up in 1 to 4 payors and then we need to generate the invoices seperately for each of the payors based upon the dollar amount allocated.
    If you have come across such scenario please let me know to accomodate such requirements.
    Thanks much
    Jai

    Hi Aj
    Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
    I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
    I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
    PLease confirm your thoughts.
    Regards
    Jai

  • Multiple Labels for One Order

    Can anybody tell me if it is possible to produce multiple labels for one order. For example a customer orders 4 units. A standard package holds 3 units so an additional package is required for the fourth unit. As a result two packing labels are required. Does OM 11i support this?

    Hi Aj
    Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
    I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
    I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
    PLease confirm your thoughts.
    Regards
    Jai

  • Ichat is stuck on "waiting for activation" as is FaceTime on my new iPhone 5. Any tips??

    Both initially worked on the phone after being stuck in Restore mode for 2 weeks. Multiple SIM card failures and now iChat and FaceTime no longer will work? Any thoughts???

    I live in Costa Rica, I have an iPhone 5, updated to iOs 8, deactivated iMessage to enable sms on Yosemite.  Anyway, reactivated iMessage and it just says Waiting for activation, and I get strange international SMS's every 1-3 hours.  Seems like the iPhone doesn't recognize these activation SMS's.  Tried everything I have found: resetting, restoring, etc.   Please help.

  • Multiple competitor for an opportunity?

    Hi,
    Here is requirement where in the report should project the multiple competitor for an opportunity.One opporotunity and thee in the same row we must have multiple competitors one by one.
    Opportunities are coming from a cube and the busness partner and partner functions and competitors are coming from IO.(master data).I  have created an Info set where in I have selected the Cube and IO.
    But my report is showing only one competitor for an opprotunity.but I must get all the competitor for an opportunity.
    points will be definitly assigned.
    Thanks,
    Ravi

    Hi Raj,
    Kindly check following paramerters are properly filled in CRM_ORDER_MAINTAIN func.
    Import Parameter: LT_PARTNER.
    Changing Parameter: CT_INPUT_FIELDS.
    I have used this FM to change the document flow of the Activity, Also you can create activity by using BAPI_ACTIVITYCRM_CREATEMULTI.
    Regards,
    Saurabh

  • "information required for activation couldn't be obtained"

    Hey, my (original, 16gb) phone was working fine all day. I started to download 2.1, and tried to add some movies (I have manual synch enabled) when I got an unknown error message. I ok'd, and continued on, and now whenever I connect my phone, I get a message "The iPhone _ cannot be used with iTunes because the information required for activation could not be obtained from the iPhone." and in smaller text, "check that the SIM card is inserted and that it is not PIN-locked." The iPhone screen says to connect to iTunes, and restarting it didn't remove this message. I'm positive that the sim card is inserted, as I used my phone multiple times today, and I've never PIN-Locked my phone. Could this issue be caused by the phone being in airplane mode? I put it in airplane mode to use some old iPod speakers, and forgot to take it out. I've never gotten this before. Please help me.

    I may have figured it out. I called apple (which you may want to do rather than try this alone). I had them stumped at first but then he had me force the phone into recovery mode. I held down both buttons until I got the apple logo and it went black at which point he said it is completely off.
    Then he had me unplug it which it already was. Then I held down the home button and plugged it in until I saw the usb plug again then I let it go. As I say, you may want to call them and tell them what I did to fix mine. I am sitting here watching it as it restores from my backup. Good luck and reply back if you have questions. I will try to answer them but I am no expert.

  • Exchange 2003 migrate to Exchange 2010 - single forest multiple domain. Active Sync problem

    Hi All, 
    I have AD single forest and multiple domain. for example, the forest domain is jakarta.co.id, and the other domain is bali.co.id.
    Exchange 2003 deployed in jakarta.co.id, User mail enabled in domain jakarta.co.id and bali.co.id.
    Then, I upgrade to Exchange 2010 (deploy in jakarta.co.id) and move mailbox from Exchange 2003 to Exchange 2010.
    All users in bali.co.id are able to access email from Owa, BlackBerry (BIS), Outlook, but cannot access from Android, Windows Phone. (Active-Sync).
    I got error information generated from https://testconnectivity.microsoft.com, as following:
    Attempting the FolderSync command on the Exchange ActiveSync session.
    The test of the FolderSync command failed.
    Tell me more about this issue and how to resolve it
    Additional Details
    Exchange ActiveSync returned an HTTP 500 response (Internal Server Error).
    Active-Sync still not work even I check option "Include inheritable permissions from this object" in security tab.
    any idea to fix this issue?
    Thanks.
    Endrik
    Endrik | blog: itendrik.wordpress.com Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

    Hi Sathish, 
    We are planning to migrate Exchange 2003 to Exchange 2013, all user already in Exchange 2010 and Exchange 2003 was decommissioned
    Event Viewer log as following:
    Log Name:      Application
    Source:        MSExchange ActiveSync
    Date:          1/17/2014 10:00:48 PM
    Event ID:      1008
    Task Category: Requests
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      EXC2010.jakarta.co.id
    Description:
    An exception occurred and was handled by Exchange ActiveSync. This may have been caused by an outdated or corrupted Exchange ActiveSync device partnership. This can occur if a user tries to modify the same item from multiple computers. If this is the case,
    Exchange ActiveSync will re-create the partnership with the device. Items will be updated at the next synchronization. 
    URL=/Microsoft-Server-ActiveSync/default.eas?Cmd=Sync&User=bali%5Csteveng&DeviceId=SAMSUNG123456789&DeviceType=SAMSUNGGTN7000
    --- Exception start ---
    Exception type: Microsoft.Exchange.AirSync.AirSyncPermanentException
    Exception message: A null value was received for the NTSD security descriptor of container CN=ExchangeActiveSyncDevices,CN=Steven Gerrard,OU=IT,DC=bali,DC=co,DC=id.
    Exception level: 0
    HttpStatusCode: 500
    AirSyncStatusCode: 110
    XmlResponse: 
    This request does not contain a WBXML response.
    Exception stack trace:    at Microsoft.Exchange.AirSync.ADDeviceManager.SetActiveSyncDeviceContainerPermissions(ActiveSyncDevices container)
       at Microsoft.Exchange.AirSync.ADDeviceManager.CreateActiveSyncDeviceContainer(Boolean retryIfFailed)
       at Microsoft.Exchange.AirSync.ADDeviceManager.CreateActiveSyncDevice(GlobalInfo globalInfo, ExDateTime syncStorageCreationTime, Boolean retryIfFailed)
       at Microsoft.Exchange.AirSync.ADDeviceManager.CreateActiveSyncDevice(GlobalInfo globalInfo, ExDateTime syncStorageCreationTime)
       at Microsoft.Exchange.AirSync.Command.UpdateADDevice(GlobalInfo globalInfo)
       at Microsoft.Exchange.AirSync.Command.CompleteDeviceAccessProcessing()
       at Microsoft.Exchange.AirSync.Command.WorkerThread()
    --- Exception end ---.
    I think KB817379 is not related because Exchange 2003 was decommissioned.
    Regards, 
    Endrik
    Endrik | blog: itendrik.wordpress.com Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Headcount report when multiple position for an employee at particular time

    Hi
    I have to develop a headcount report which will show the employee count by each personal area. Now i can simply bring in headcount data from the R/3 by standard source system. My problem is that one employee can have multiple position at a time. In standard routine every record is assigned headcount by 1. Now problem is that there are multiple records for an employee as multiple position are assigned at the same time which will lead to wrong headcount.
    Thanks
    Kamal

    Hi Kamal,
    Can you write your report off of 0EMPLOYEE or did you change the key to include position?  Just include employee group and employment status to determine who your active employees are. 
    Brian

  • 1 server, multiple oracle_homes for each instance (dev, test, uat, etc)...

    Hello,
    We have one beefy server to hold our dev and test and maybe more non-production databases. My plan was to install separate oracle_homes for each so that I can patch and only affect one instance at a time. Is anybody else doing this? Does this sound right? Any gotchas that you have run into with this type of environment?
    I read something about you should only have one active listener...
    Same concept, but with the ASM instance. Can I also install multiple oracle_homes for each asm instance on the same box? Is anybody else doing this? Again any gotchas people have run into to? For ASM, should I also have only one active listener?
    Am I right that the only thing that affects all instances is at the OS, hardware level such as Linux patches, anything to do with users, groups, shared folders, nics, etc?
    Thank you for your input!

    For ASM, should I also have only one active listener?ASM does NOT require any listener & none should exist for ASM.

Maybe you are looking for