Multiple presence for one object

I'm trying to setup an object (button) with two different presence script. Right now I have a button with the presence set to visible (screen only) under the object --> field tab. Then I have at the docReady event i put this.presence = "hidden" not sure if this is the right way. Is there a better way to do this? It seems to work find on the form but when the form is saved and reopened the button disappears. I guess I should also mention that the appearance of the button is controled by drop down. Any help on this please is greatly appreciated.

Hi,
The script is firing when the form is opened (docReady event) and is hiding the button as requested. I think that I would delete this docReady event and just leave the presence be set from the script in the dropdown. Does that make sense?
There is an example here that looks at ways in which you can script the presence and relevance properties: http://assure.ly/h7whb8.
Niall

Similar Messages

How to find multiple transport requests for one object

Hi all,
Is there any function module which will fetches multiple transport requests ( if created ) for one object.I tried almost all the function modules , but i didn't got the solution.
I need to develop a report ,   which will takes a single Task number as input and gets the Request number from table E070.
Based on that Request Number i will fetch remaining Task numbers under it.
Then for all the Tasks Numbers, i am fetching their objects by using table E071.
I need to list out whether any of these objects are in multiple Transport Requests. Once i got all the Transport Request numbers i need to release the Request based on their Transport Request sequence.
I tried the following FM's , but not able to get the solution.
SVRS_DISPLAY_VERSION_LIST
SVRS_GET_VERSION_DIRECTORY_46
SVRS_GATHER_REQUEST_FRAGS
Thanks..

Hello
I have tried with below code
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT RSWBO040 USING SELECTION-SET 'TEST'
                EXPORTING LIST TO MEMORY
               AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
   TABLES
     listobject = list_tab
   EXCEPTIONS
     not_found = 1
     OTHERS           = 2.
IF sy-subrc = 0.
   CALL FUNCTION 'WRITE_LIST'
     TABLES
       listobject = list_tab.
ENDIF.
break-point.
Submitting the program(RSWBO040) of SE03 transaction a will result in 'CNTL_ERROR' dump.
Please try some other options
Thanks

Can you have multiple users for one account?

Can you have multiple users for one account? if so how do you set it up.
We are using it for our department and it would be great to see who created what form instead of it being all one name.

Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
More information on how to share :
http://forums.adobe.com/docs/DOC-2462
Information on how to copy a forms to a different account :
http://forums.adobe.com/docs/DOC-1390
Hope this helps
Gen

How do i scan multiple pages for one attachment

I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

Multiple Values For one Condition in Choose From List

I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

Hi,
Check this thread
How to set a Multiple condition in a single CFL
Hope that helps,
Vasu Natari.

Multiple Labels for One Order

Can anybody tell me if it is possible to produce multiple labels for one order. For example a customer orders 4 units. A standard package holds 3 units so an additional package is required for the fourth unit. As a result two packing labels are required. Does OM 11i support this?

Hi Aj
Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
PLease confirm your thoughts.
Regards
Jai

Multiple currency for one vendor

Hi,
Is there any way to have multiple currency for one Vendor?

Hi Siva,
Yes, It is possible to maintain multiple currency for one vendor. How ? The procedure as follows.
During vendor creation using T-code XK01 and currency enter input data screen select Extra option on the top of the screen click and display 'Add Purchasing Data' option click opened new screen and give input data plant, tick mark of the option Data retent.at plant level allowed and tick for OK.
After that, you have enter multiple currency for the same vendor during vendor creation time, then you will create PO using T-code ME21N the currency field you have fill as you required currency by default first currency of vendor created will be display.
Hope, it is useful for you.
Regards,
K.Rajendran

Multiple choose for one parameter

Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
Select ....
where ....
content.style IN (:p_style)
(content.style is a column in table "content", and "p_style" is a bind variable)
i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
Li

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by whl:
Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
Select ....
where ....
content.style IN (:p_style)
(content.style is a column in table "content", and "p_style" is a bind variable)
i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
Li<HR></BLOCKQUOTE>
you can do that by flowing the stap
at first you will write a select statement
select ...
From ...
where Style (colomn name) = &style1
then you create a user parameter soupose wich name is P_style and which valus is x, y, and z you should enter another value soupose that name is 'All' (All means x + y + Z)
then you write in after parameter form trigger...
IF :P_style = 'All' then
:style1 := null;
Else :style1 := 'and style (style means your column name) = :P_style;
end if;
null

Multiple Vendors for one Document Number in BW

Hello All,
We are getting Multiple Vendors for one document in BW. In R/3, standard table and RSA3, we are able to see correct vendor where as when it is coming into BW it is showing incorrect vendor in PSA and Data Target.
All issues are coming for Process Key 1 only.
*For Example:*
Document: 9400000007
Schedule Line:1
Doc Item: 1
Vendor:
0010019229 - Incorrect Vendor
0010018962 - Correct Vendor
Committed Quantity: 0
Doc Type:
ZNB
ZNPP
Process Key: 1
Not sure how to upload screen shot.
Please suggest.
Thanks,
Vijay

Hi ,
Are you loading for the first time ? If yes have you checked Transaction BF11 settings.
Regards
Rahul Bindroo

Multiple payers for one sold to party

Hi All,
Can we have multiple payers for one sold to party?
Thanks

Hi
Yes, you can have multiple PAYER for one Sold-to-party (only in the Customer master).
This Partner relationship is maintained in two places. They are,
> Customer master ( sales area data > partner function tab )
> Sales documents (at Header level and Item level)
In Customer master data, you can have multiple partners ( e.g, multiple Payers) for one Partner function( e.g, SH,BP,PY).
But in Sales document, you can have only one Partner for one Partner function.
So, you can have only in Customer master data multiple pertners. So, first create the different Payers through XD01 ,choosing Account group "Payer".
Then assign all those PAYERS in the master data of the Sold-to-party by going in the change mode XD02 and save it.
When you create the Billing document, system will give a pop-up of those list of Payers and you have to choose one . You can have only one Payer in one Billing document.

Lightroom 5 slowdown, my post processing times have tripled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

my post processing times have tripeled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

my post processing times have tripeled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

On my contact list I have multiple names for one person

On my contact list I have multiple names for one person.

The Account Owner can see the call/text logs for all lines on the account, but each line needs its own My Verizon account for messaging and backups. Those lines will be listed as Account Members and will have limited info. available to them regarding the account.

Is it possible to run TWO parellel configurations for one Object??

SAP Gurus,
We have a strange requirement from the client to have to configurations established in the system for one configuration object.
Without taking much of your time let me paraphrase the requirements.
The client is having two different types of putaway strategies in their current business process. And they toggle between these putaway strategies by reaching out to their production support group and they make configuration changes to have the other put away strategy
One Step Putaway: GR area --> High Rack Storage
Two Step Putaway: GR area --> Interim storage (area at the end of each aisle of high rack storage) --> High Rack
Client wants to have two parallel configurations for both of these put away strategies and needs an ability to switch from one to another. This switching ability should be accessed from SAP screen without any IT intervention (no configuration)
- Switching ability should allow the warehouse manager to change from one step to two step put away strategies without any IT intervention.
- Switching ability should be accessed my SAP Screen (Z-transaction or something with a radio button to toggle around)
Is it possible to have two configuration made for Putaway Strategies and switch them on/off depending on the warehouse needs??
Your invaluable feedback on this will be highly appreciated.
Thanks again folks,
Dhaval
Edited by: Dhaval Joshi on Mar 4, 2008 12:09 PM

Q1--I don't believe it is possible. An organization can have multiple licenses tied to its main email address, for example, but then they are assigned to the individual users.
Q2--Yes, you would just need to log out of your account within the CC desktop app prior to logging in on the other account.
If you have any questions, feel free to reach out.

Finalize() method being called multiple times for same object?

I got a dilly of a pickle here.
Looks like according to the Tomcat output log file that the finalize method of class User is being called MANY more times than is being constructed.
Here is the User class:
package com.db.multi;
import java.io.*;
import com.db.ui.*;
import java.util.*;
* @author DBriscoe
public class User implements Serializable {
    private String userName = null;
    private int score = 0;
    private SocketImage img = null;
    private boolean gflag = false;
    private Calendar timeStamp = Calendar.getInstance();
    private static int counter = 0;
    /** Creates a new instance of User */
    public User() { counter++;
    public User(String userName) {
        this.userName = userName;
        counter++;
    public void setGflag(boolean gflag) {
        this.gflag = gflag;
    public boolean getGflag() {
        return gflag;
    public void setScore(int score) {
        this.score = score;
    public int getScore() {
        return score;
    public void setUserName(String userName) {
        this.userName = userName;
    public String getUserName() {
        return userName;
    public void setImage(SocketImage img) {
        this.img = img;
    public SocketImage getImage() {
        return img;
    public void setTimeStamp(Calendar c) {
        this.timeStamp = c;
    public Calendar getTimeStamp() {
        return this.timeStamp;
    public boolean equals(Object obj) {
        try {
            if (obj instanceof User) {
                User comp = (User)obj;
                return comp.getUserName().equals(userName);
            } else {
                return false;
        } catch (NullPointerException npe) {
            return false;
    public void finalize() {
        if (userName != null && !userName.startsWith("OUTOFDATE"))
            System.out.println("User " + userName + " destroyed. " + counter);
    }As you can see...
Every time a User object is created, a static counter variable is incremented and then when an object is destroyed it appends the current value of that static member to the Tomcat log file (via System.out.println being executed on server side).
Below is the log file from an example run in my webapp.
Dustin
User Queue Empty, Adding User: com.db.multi.User@1a5af9f
User Dustin destroyed. 0
User Dustin destroyed. 0
User Dustin destroyed. 0
User Dustin destroyed. 0
User Dustin destroyed. 0
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 1
User Dustin destroyed. 1
User Dustin destroyed. 1
User Dustin destroyed. 1
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
Joe
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin pulled from Queue, Game created: Joe
User Already Placed: Dustin with Joe
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
INSIDE METHOD: false
INSIDE METHOD: false
USER QUEUE: true
INSIDE METHOD: false
INSIDE METHOD: false
User Dustin destroyed. 9
User Joe destroyed. 9
User Dustin destroyed. 9
User Dustin destroyed. 9
User Dustin destroyed. 9
User Dustin destroyed. 9
INSIDE METHOD: true
INSIDE METHOD: false
USER QUEUE: true
INSIDE METHOD: false
INSIDE METHOD: false
INSIDE METHOD: true
INSIDE METHOD: false
USER QUEUE: true
INSIDE METHOD: false
INSIDE METHOD: false
It really does seem to me like finalize is being called multiple times for the same object.
That number should incremement for every instantiated User, and finalize can only be called once for each User object.
I thought this was impossible?
Any help is appreciated!

Thanks...
I am already thinking of ideas to limit the number of threads.
Unfortunately there are two threads of execution in the servlet handler, one handles requests and the other parses the collection of User objects to check for out of date timestamps, and then eliminates them if they are out of date.
The collection parsing thread is currently a javax.swing.Timer thread (Bad design I know...) so I believe that I can routinely check for timestamps in another way and fix that problem.
Just found out too that Tomcat was throwing me a ConcurrentModificationException as well, which may help explain the slew of mysterious behavior from my servlet!
The Timer thread has to go. I got to think of a better way to routinely weed out User objects from the collection.
Or perhaps, maybe I can attempt to make it thread safe???
Eg. make my User collection volatile?
Any opinions on the best approach are well appreciated.

Multiple presence for one object

Similar Messages

Maybe you are looking for