Multiple Printers in Print Preview w/CS2?

Não consigo ter as duas printers disponiveis no Print Preview
Tenho o CS 2 com o Windows 8.1.

hi,
you cont see all the pages in the print preview.by clicking page down u will see one by one page.i think there is no such option to see like that.
please reward me if helpful.
Regards,
Reddy.

Similar Messages

Aperture 2.0 / Epson (Multiple Printers) Borderless Printing Issue

Our photography business recently purchased some Nikon D3s. As Aperture 2.0 is necessary to utilize them, we became an early adopter of Aperture 2.0. Immediately after the upgrade, borderless printing became impossible on all of our Epson R2400s and our Epson 3800s.
Through a VERY painful process, we were able to get the R2400s to print borderless 4x6s, but no other sizes. The 3800s are a different story. Not only is it impossible to print borderless, but the printed images are rotated by about 1-2 degrees in the clockwise direction.
It is important to note that no other program (Photoshop, Lightroom, etc.) are experiencing this behavior -- only Aperture and immediately following the 2.0 upgrade.
One oddity that may provide a clue. All combinations of paper, border size, "expand" settings, etc. have been tried. Every time, even the calibration pages printed with a border. On paper, however, allows the calibration page to print to the edge, however, 16-bit printing MUST BE TURNED OFF. Although it prints to the edge, it is still rotated by 1-2 degrees. Turning off 16-bit printing does NOT, however, make any image print correctly -- only the calibration page (and it is not correct).
Apple -- if you are reading this, please respond as quickly as possible. We rely on aperture for our business workflow. It is not practical for us to print every image out of Adobe's suite.

Epson hasn't released a driver for the 1280 since July of 2006. Real simple to check:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 14387&prodoid=28907797&infoType=Downloads&platform=Macintosh
I think that's an Epson problem, not an Aperture problem. Many printer drivers had to be updated for OS X 10.5 Leopard (released in October of 2007). Hopefully one is coming, but that is an older printer, so I wouldn't hold out a lot of hope.
I didn't check for the Kodak, but it should be easy for you to find that info over at Kodak's web site.

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

Generate and Print Preview Multiple Forms in a Single PDF

There have been other questions similar to this but none directly address my problem. We have the need to generate multple forms in a .pdf using Adobe interactive forms. We can generate the multiple forms, but the user has to click on each form to view. They want to have the forms in a single document that they can scroll through before printing. We can do this in SmartForms but need to do it in Adobe. Does anyone know how to generate multiple forms, either multiple copies of the same form or various forms, from an ABAP program into a single pdf that can be print previewed, in scrollable form, by the user?

I can describe it one more time, I think:))
You have multiple options, but only one "reasonable" within SAP.
You can call an external application (through command line etc.) to concatenate forms for you.
You can use iText as mentioned in the thread, and write yourself a "tool" which will concatenate the forms for you.
Both these "options" would not be acceptable for my clients, I name them to help you get the whole picture.
Then there is the third option: use a form for a single instance (template/ form A) and create a new form (form B), where you will use the A template:
- you need to: create a new interface where everything from the old interface is a row of the table (example: you have a form to print out the personal card of the employee, so in a new form you will need to use a table, where a row is an employee)
- you need to create a new form layout based on the new interface:
in this new layout you will paste the whole layout of the old form (A/ single instance) and wrap it into a subform. The added subform will work as a table (you will bind that to the table from interface) and everything from the old template within this new subform will work as a "row" (something what you can repeat for each data item).
Does that sound reasonable?
Cheers Otto

Since latest upgrade I cannot "print" or show "print preview" from any web page. This is true of both of my printers and I have followed directions on plug-ins and have reinstalled Firefox etc. I am about ready to switch to Internet Explorer! w

Since upgrading Firefox, it doesn't respond when I click on print and/or print preview while displaying web pages.. No error message, just no response. I tried using both my printers..a HP and a Canon and get no results with either. I have no problem printing from any other place (including "Print" instructions within web pages, usually). I have recently upgraded my desktop (Dell Vostro 220) to Windows 7 and it went smoothly. The Firefox upgrade came at about the same time, so I don't know if Windows 7 is part of the problem. I need be able to print from the screen of web pages!

Hi jjoyceeric,
Have you looked at the Knowledge Base article [[Firefox prints incorrectly]]? There is some good troubleshooting information in there. I would suggest that you try resetting your print settings.
Hopefully this helps!

Print to multiple printers

Hi,
Could any one of you please tell me how to send the same page to multiple printers automatically ( without manual selection).
Regards,
Sandhya.

Hi,
Am calling a standard program thru func module to which am sending the printer name to options parameter of open_form thru a BAdi.
My requirement is to get the receiving printers from custom table based on condition and then send the same form (page) to all those printers. How can I do this. FYI, RQ*31 is the print program .
Thanks,
Sandy.

Multiple vendor to see in print preview

Hi All,
I have a requierment where I have data for more then 1 vendor. I need to print the data in smartform for them.
I am done with the printing of data in smartforms but got stuck at one point.
Req is: there are 3 vendors that need to be print in smartform.
I have done the coding in Driver program and sending the data to smartform in loop by which I am able to print the multiple vendor data. But user need to see the output of 3 vendors in Print preview.
at present when user execute the report and select print preview 1 vendor data is shown. but to see the other vendor data user needs to come out of print preview and then again select print preview to see the 2 vendor data.
same for more then 2 or 4 or 5.
User wants to see the data for all the 3 vendor in print preview without going back and fourth. Please suggest how should I achieve this.
Thanks.

Hi Anil,
I do have next page in smartform but issues is data in Main window and secondary window both are changing. Secondary window has logo, company address based on vendor.
Changes are getting replicated in main window for multiple vendor but not in Secondary window. Please suggest any answer for this.

Printing checks to multiple printers

Based on organizations my AP checks print to different printers. I'm using one check template for all of them. How critical is it to have the actual printers to be exactly same model? Do I need to even worry about this?
Tomas

Welcome to the discussions!
+Can a TC be strictly wireless?+
Yes, although in this type of setup the TC will be a wireless backup device only. If you have another Apple"n" router creating your main network, you could also configure the TC to "extend a wireless network" to provide more wireless coverage.
+Can I have more then one printer attached?+
Assuming your printer is compatible with the USB port on the TC, (not all printers are), and you use a powered USB hub, you can attach multiple printers.
+(and will a USB to parallel adapter work?+
Can't provide an answer on that one, but would be surprised if it worked.
+Multiple HDs hanging off it work? Is there a limit to the number of devices? and if so, a limit per type or just total?+
As long as you use a powered USB hub and each HD has it's own power supply, there's really no set limit on the number of devices within reason.
+And is WiFi backups still painfully slow?+
Backups will occur as quickly as your current wireless network allows.
+(and can I move a BU to the TC?)+
Not sure what you mean here. The TC is designed for Time Machine backups, but you can also store other files on the drive if you wish, providing that there is plenty of free space for Time Machine to operate correctly.

White areas printing as orange for multiple printers.

Hi all,
Did a search and didn't find an answer, so here is the issue - I have a G5 running 10.3.9, and both an Epson R300Inkjet and a HP 3600dn laserprinter. On both printers, any area defined by the application as containing no data (and would normally be left white) is printing a sort of orange-red. Areas defined within an image as white are fine. It's as if somewhere there is a data error telling both printers to render non-data space as this solid red. I thought it was the drivers on the Epson, but I just got the HP today and it immediately did the same thing.
Any ideas?
Thanks!
-Stu

Actually, no, that is not the case. Yes, permissions have been checked. Have 4 Macs. 1 Intel based, the other 3 PowerPC. ALL of them have this problem. It's not anything corrupted. On one of the machines, I just instaled the printer driver from Brother. So, fresh and new.
So, my question to the group is does anyone else have multiple printers and use printer presets. If so, if you use one other than "standard" and print, then, print again (our preset will then be the default, do not pick again), does it print the second time correctly, or, does it revert to standard settings?
No, the printer has no way to set the default tray. Which is stupid as the multi function tray, where you can put a limited number of sheets, is exactly where you WOULD put forms, and, the regular tray, which holds a LOT of paper, is of course where you would put regular paper. Funny thing is, the regular tray is TRAY 2! Which is not the default.

Printing problem when use multiple printers

Hi to all,
we are using printing through multiple printers in the network, after u start the machine if u use one printer it is ok, when the time u start printing with another printer the problems start like it starts from middle of the page or it prints half of the page then it leaves balnk remainig. etc. the printers \we are using are one is EPSON LX-300+ and another is HP Laser 1200. we are using orginal softwares suppliers by the prinnters.. Oracle reports developer6 is the reports.
any one has got experice in this.
Thanks in advance..

Can you access page1 and page2.jsp correctly on their own?
ie could the problem be with page2.jsp rather than the import command?

Printing delivery note output to multiple printers...

Hai team, we have a custom delivery note output which is called commercial invoice. This output is defined thru transactions VV21 & VP01shp. The output device is defaulted within these transactions. However, there's a request to send the printing immediately to multiple printers. Does anyone know how we can set so that the output gets printed immediately to multiple printers since the configs mentioned above only allow us 1 entry in the output device field?

Hi
when you are maintaining the output master, maintain the same document type for different partner functions and for each partner function, you can give a different printer in the communication screen. By this , you can trigger the print out in multiple printers for any document.
Reward points if it helps.
HI ANANDAN,
I TRIED IT, IT IS NOT WORKING, AS THE DOCUMENT TYPE IS UNIQUE IN OUTPUT MASTER. APOLOGISE FOR GIVING AN INCORRECT SOLUTION.
Message was edited by:
iimnava

How can I select paper size while in print preview ?

I have a printer with four different paper trays, and each one is loaded with different size of paper: A3, A4, Legal, envelopes. When I use IE 11, I can easy go to print preview, click on page setup (little gear icon), select paper size , margins, etc.. there, and when i hit OK, the page is adjusted to the settings I selected and its ready to print, and printer selects the proper size of the paper automatically
In Firefox v32, I can almost do this same, but I'm stuck with printing only on A4 style paper, as I don't see where to select the paper I want to print on !
I tried to select A3 and legal paper in the printer driver, but then firefox used the selected paper, but printout on the paper came out as set to A4 size, and rest of the page was empty ! Also I was not able to see the page preview of the selected paper either. How do I then print on other size papers than a4 ?
I found only one workaround which does not suits my needs but works: First: Go to printer driver and select legal or A3 paper as default, and then open firefox. If I do that i can print on any paper I select, but thats a horrible workaround, because then I often forget to change the default paper size back inside the printer driver, and i print my documents on wrong paper, wasting paper, ink and time...
Please let me know if there is a way to fix this printing feature somehow.
Thanks.

MichalB,
Sorry, IMO there is no real "fix" for what you are experiencing. Printer prefs set or changed in the operating system won't affect Firefox printing ''[IMO, either ancient code in Firefox or a "cross-browser thing".]'' Firefox has its' own settings for prefs and it defaults to the "last used" for all printer preference setting. And there is no way to set a pref as "use now and return to my defaults after this print job is completed".
As you have found out, there is no way of changing paper size from the Print Preview screen. Other prefs - Margins & Header/Footer can be changed via Page Setup and you can see changes in the Preview window, but not for paper size. As ''CoryMH'' mentioned, '''paper size''' is selected thru what called the "native print dialog" box using the '''Properties''' button which shows a window provided by your printer software for the Printer which is selected in the "native print dialog" window, and accessed after you hit the Print button in the Print Preview screen.
Problem is that you can't '''"preview"''' what is going to be printed when you change paper size. If you go back to Print Preview without printing from the "native print dialog" the change for Paper Size isn't saved for viewing in Print Preview!
IMO, it would be nice if Firefox recognized each "tray" as a separate printer, so that a user could set Margins & Header/Footer prefs AND paper size per tray. IOW, a feature sort of writing a completely new print module that would reflect "today's" environment with multiple tray printers; rather than to continue using the print module that was built by Netscape back in '94 - '95, which we are stuck with almost 20 years later.
''As I sit here shaking my head after composing this reply, wondering why the issues I had back in 2002 with printing from Firefox / Firebird / Phoenix haven't been corrected in the last 14 years.''
''I do like "old stuff", and have a vehicle sitting my driveway that rolled out of the showroom 30 years ago come October 1 - a 35th birthday present I purchased for myself. [85 Corolla GTS TwinCam coupe - aka Sprinter in GTA] But as far as computer software, I prefer it to be compatible with hardware made in this century.''

Blank page sent to my printer..Print Preview shows my page as a .pdf (On Mac OS 10.5.8)

A blank page is sent to the printer. When I view the text page in Print Preview, the page is blank and it is a .pdf. The print feature works fine with other browsers. This suddenly occurred. One minute I was able to print...the next minute blank pages print. I have tried two different printers and both experience the same problem on Firefox. The plug-ins are up to date.
Thanks, in advance, for any help.

Slow down a bit and think this through.
CUPS on linux is nearly identical to CUPS on OS X - but there is no Mac-to-Mac Apple proprietary print sharing. Rather, on linux you are sharing the printer using standard printing protocols. Just like on the Mac (when using the standard protocols like Windows/SMB or IP printing), linux print queues expect postscript input. Try using a generic postscript driver from the mac.
And when you add the printer via Windows Printing or IP > LPD or IPP, you will need to know the queue name for that printer from the linux box. (one computer with one IP address can have multiple printers - so what's the additional address info to print to your desired printer? - queue name.)
HTH

New HP7525, printing preview, how to enable?

I've had a few HP printers in my time, and also have another wireless HP310a now. In all of these, and especially in the HP310A, I can enable a PRINT PREVIEW in the Printer properties. I can't seem to find this?
Does this printer driver have such an option?
Even finding the Duplex setting wasn't as easy as on the 310A.
IrvSp

Hi,
this could be due to multiple reasons....
Reason 1 = You are having inquiry access alone and not allowed to create Invoices
Inquiry Navigation = Payables Responsibility > Invoices > Inquiry > Invoices
Entry Navigation = Payables Responsibility > Invoices > Entry > Invoices
Reason 2 = Inspite of following an ENTRY navigation you still see the NEW Button disabled, it means
payables system does not allow creation of Individual invoices, you should create it only in batch mode.
Check the value of profile option "AP: Use Invoice Batch Controls" ..If the value is YES, it is intentional that NEW button is disabled...
Reason 3 = You are using Entry Navigation, your responsibility is not enabled for Invoice Batches
The invoice create function might have been excluded from the responsibility....
Regards,
Ivruksha

Scanning multiple pages from print book into computer

How to scan multiple pages from print book into computer? Someone supplied a link to this question, but I got stuck at step 1: Where is "HP Director software"? In other directions, it says to open the "HP Scan window," but that option is not available to me when I follow the directions. I have an HP 2159m computer, HP Photosmart Plus all-in-one, Windows 7, and use Firefox, if that's any help.
TIA

I have a similar problem:
I am using an HP Officejet 6310xi via its TWAIN interface. Regardless of which application invokes TWAIN (whether Irfanview, Thumbs Plus, or something else), the scanner dialog closes after transferring each scanned image. To scan the next page requires re-starting the scanner, beginning with a whole new preview and re-entering all my scan settings. This is only an issue with the HP scanner, not with my Cannon CanoScan LIDE 100, Visioneer OneTouch 8920, or any other scanner, each of whose scanner dialogs stay open for scan after scan. Can anyone help me make the HP scanner dialog stay open for multiple pages?
Note: Based on a suggestion on another site I set my scan preferences to include "Prompt for Additional Scans from Glass" as follows, but it did not help.
I am experienced at scanning, but I find it extremely frustrating that the HP scan dialog closes, forgetting its settings, after each page.
If it helps others, I gladly share my article, "Freedom from Paper--At Last" here
http://www.richpasco.org/paperless.html

Multiple Printers in Print Preview w/CS2?

Similar Messages

Maybe you are looking for