Multiple Printers on one AE?

Can I put more than one printer on an AE? I.e., I have a Canon bubblejet on the USB port. Can I put a networked Samsung on the Ethernet port at the same time?

Welcome to the discussions!
The answer will depend on the version of your AirPort Express and how you have it configured on your network.
1) What model number of AirPort Express do you have? (It's on the side of the device)
2) What purpose on your network does the AirPort Express perform?
Create it's own wireless network
Join a wireless network
Extend a wireless network

Similar Messages

Adding multiple printers in one ip address

Hi i have one print server and i want to configure 3 printers with one ip address or one host name.How can i register these printers in the OS.Sorry if its wrong place to post.I have AIX 5.1 os and Apps 11.5.10.2
rgds
rajesh

on AIX you can do it by runing command smit or smity as root then follwo the screens
before that you have to add the printer ipaddress and its name in your /etc/hosts file and you have to be able to ping it, after adding the pringre try to print on it form command line
lp -d printer_name file_to_print
fadi
http://oracle-magic.blogspot.com

Multiple Printers on One Account

I have an hpeprint account. May I attach more than one hp eprint enabled to it. As well, will I be able to choose which printer to print from?

Hi Mark3D15,
Yes, you can add more than 1 ePrint capable HP printer to your ePrint account. To add each printer, and instructions on how to print to them, see the following link:
Setting up ePrint on your HP ePrint printer
http://h71036.www7.hp.com/hho/us/en/ep/articles/setting-up-mobile-printing.html
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

How do i add multiple hp 8600 printers to one account

how do i add multiple hp 8600 printers to one account

Hi rexdalehub,
If you are referring to the ePrint Center, you can simply choose "Add a printer" to the right of your current printers tab.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Installing Multiple Printers of Same Model on One Computer

I love the HP DeskJet Ink Advantage K109a. I own four of these printers and would like to hook up two printers to one computer. Could someone please tell me how to go about doing that? Do I just install them individually or do I have to configure the USB ports separately? Thank you for your help.

Yes. It's possible to have more than one backup of your iPhone on your computer. The backup is stored in this folder: Library/Application Support/MobileSync/Backup in your users profile. You have to disconnect your iPhone, navigate to the folder, move that folder to another part of your computer, and then plug your iPhone back in. This should create another backup in that folder. Then if you add the folder that you moved back in. You'll have two different backups. This is a link to the article where I got this info from. It also has the other places backups are kept on your computer.
http://www.tuaw.com/2007/08/22/more-on-iphone-backups

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

Print to multiple printers

Hi,
Could any one of you please tell me how to send the same page to multiple printers automatically ( without manual selection).
Regards,
Sandhya.

Hi,
Am calling a standard program thru func module to which am sending the printer name to options parameter of open_form thru a BAdi.
My requirement is to get the receiving printers from custom table based on condition and then send the same form (page) to all those printers. How can I do this. FYI, RQ*31 is the print program .
Thanks,
Sandy.

Elements 10 does not recognize multiple printers of same model?

In our business, we print on multiple printers, some of which are the same model.
For example, the Epson Stylus C88 is a common printer for us and we've been using PSE for years, since Version 3. For the purpose of our sample integrity (we print specialized inks to analyze their density), we wish to continue using Epson C88's for as long as we can still purchase them.
We've been making infrequent version upgrades to PSE, but are now finally caught up.
Unfortunately, when trying to print with PSE10 having more than one C88 installed, two problems occur:
1) The printer selection menu has all the printers listed, but as soon as we access the Advanced Settings, the printer choice defaults towards the most recently installed C88 (ie. we wanted to use Copy 5 and it would not allow us to choose anything but Copy 9, the latest one).
2) We're allowed to print exactly once. When I try to print a second time, a dialog box pops up saying:
"Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer."
The box pops when I hit the print command, meaning I can't do ANY printing, despite having a large number of printers installed, unless I close and reload the program.
I attempted a quick fix of this by uninstalling all my Epson C88's, and then reinstalling the particular C88 I wished to use. I was allowed to print, and continue printing, as long as that C88 was the only one that was installed. Unfortunately, when I moved to install another, the problem surfaced again. This time, I deleted my "original" C88 while keeping the second copy installed, and the problem persists. I could maintain one and only one Epson C88 installed at any time, but I'd rather not have to.
Doing a little research, I've noticed that this is not the only model of printer with this problem. I've attempted to load up an HP Officejet Pro 8000, and the exact same problem occurred, leading me to believe that it's an issue in PSE, not the printer.
The printer drivers are all current, and I have the latest version of PSE10 installed. This hasn't happened on any version previous to my knowledge (earliest known being PSE7).
Thanks in advance for any assistance you can give in this issue.
Scott Zdankiewicz
Research Associate
Cabot Corporation

Yeah, that does seem to allow it to print. This means I should rename all the printers, which, honestly, is not that big of a deal. Not so much as uninstalling and reinstalling.
Thanks!

Multiple Printers off USB Hub

I run a complete variety of macs as a home network and am thinking of buying a new Airport principally so that I can use it as a server hub with the external drives I have (holding backups, photos, music etc).
I'm quite happy setting up the network (mixed wire and wireless) but am wondering if I can run multiple USB drives and multiple printers (colour and cheap laser).
If I place these in one location running a powered usb hub, will all the drive show up ? and If they are switched on, will all the printers show up as available ?
Any helpful hints, I'm looking to hide backup drives and printers leaving a minimal desktop and laptop footprint.
(PS buying new macbook soon to get the speed benefit from AE, but the network disk/printer is what interests me most)
Lloyd

I'm quite happy setting up the network (mixed wire
and wireless) but am wondering if I can run multiple
USB drives and multiple printers (colour and cheap
laser).
Yes you can
If I place these in one location running a powered
usb hub, will all the drive show up ?
Yes, if the drives are externally powered you may not need a powered hub.
and If they
are switched on, will all the printers show up as
available ?
Yes
iFelix

Printing checks to multiple printers

Based on organizations my AP checks print to different printers. I'm using one check template for all of them. How critical is it to have the actual printers to be exactly same model? Do I need to even worry about this?
Tomas

Welcome to the discussions!
+Can a TC be strictly wireless?+
Yes, although in this type of setup the TC will be a wireless backup device only. If you have another Apple"n" router creating your main network, you could also configure the TC to "extend a wireless network" to provide more wireless coverage.
+Can I have more then one printer attached?+
Assuming your printer is compatible with the USB port on the TC, (not all printers are), and you use a powered USB hub, you can attach multiple printers.
+(and will a USB to parallel adapter work?+
Can't provide an answer on that one, but would be surprised if it worked.
+Multiple HDs hanging off it work? Is there a limit to the number of devices? and if so, a limit per type or just total?+
As long as you use a powered USB hub and each HD has it's own power supply, there's really no set limit on the number of devices within reason.
+And is WiFi backups still painfully slow?+
Backups will occur as quickly as your current wireless network allows.
+(and can I move a BU to the TC?)+
Not sure what you mean here. The TC is designed for Time Machine backups, but you can also store other files on the drive if you wish, providing that there is plenty of free space for Time Machine to operate correctly.

Handling Unit label (V6) - multiple printers configuration

I would like to print the handling unit label (V6) in multiple printers. Currently the condition records are set to plant/Packaging material combination with printing in one printer. I would like to have the ability to print to different printer in HU02 t-code based on userID. Can I configure it based on storage location or userid? Thank you.

Are you using WM+HUM or only IM+HUM?
In OMJ3 you can define printer by Storage Location,
in OMLV you can defin printer by WM organizational levels (storage types), movement type etc.
You can use NACE t-code to set the output type you want in addition to MDoc printout.
Can you explain your config, when are you printing your HUs at the moment?

White areas printing as orange for multiple printers.

Hi all,
Did a search and didn't find an answer, so here is the issue - I have a G5 running 10.3.9, and both an Epson R300Inkjet and a HP 3600dn laserprinter. On both printers, any area defined by the application as containing no data (and would normally be left white) is printing a sort of orange-red. Areas defined within an image as white are fine. It's as if somewhere there is a data error telling both printers to render non-data space as this solid red. I thought it was the drivers on the Epson, but I just got the HP today and it immediately did the same thing.
Any ideas?
Thanks!
-Stu

Actually, no, that is not the case. Yes, permissions have been checked. Have 4 Macs. 1 Intel based, the other 3 PowerPC. ALL of them have this problem. It's not anything corrupted. On one of the machines, I just instaled the printer driver from Brother. So, fresh and new.
So, my question to the group is does anyone else have multiple printers and use printer presets. If so, if you use one other than "standard" and print, then, print again (our preset will then be the default, do not pick again), does it print the second time correctly, or, does it revert to standard settings?
No, the printer has no way to set the default tray. Which is stupid as the multi function tray, where you can put a limited number of sheets, is exactly where you WOULD put forms, and, the regular tray, which holds a LOT of paper, is of course where you would put regular paper. Funny thing is, the regular tray is TRAY 2! Which is not the default.

Printing problem when use multiple printers

Hi to all,
we are using printing through multiple printers in the network, after u start the machine if u use one printer it is ok, when the time u start printing with another printer the problems start like it starts from middle of the page or it prints half of the page then it leaves balnk remainig. etc. the printers \we are using are one is EPSON LX-300+ and another is HP Laser 1200. we are using orginal softwares suppliers by the prinnters.. Oracle reports developer6 is the reports.
any one has got experice in this.
Thanks in advance..

Can you access page1 and page2.jsp correctly on their own?
ie could the problem be with page2.jsp rather than the import command?

Multiple Printers on 802.11G; Workaround?

Hi - We just moved and I'd love to setup both our printers to our older AEBS, model no. A1034: (http://support.apple.com/specs/airport/AirPortExtreme_Base_Station_nomodem.html)
Printer #1 = Epson RX620 (AIO)
Printer #2 = Samsung ML-1740
Would buying a powered USB hub work? If not what's my best bet short of buying the new AEBS - N, which supports multiple printers? I'd love to save some cash so maybe I buy the AX? Are there simpler solutions?

Just reread my question; perhaps I can clarify:
I believe that my older UFO-shaped AEBS only supports one printer via its single USB port. Can someone confirm that?
Or could I plugin a powered USB hub and add a second printer to my AEBS?
If this isn't possible, what is the best solution for extending my network to include two printers?
Thanks!

Multiple Printers on AirPort Express 802.11n

I know the literature on the OLD airport express said that you could not connect multiple printers via a USB hub. Is this possible on the new version, released 3/17/08?
It would really be outstanding...
Also, any Apple techs out there know why we don't see airtunes on the Extreme Base Stations or Time Capsule?
Thanks.

I just bought an AXP at a local Apple Store. While there, I was told multiple printers would work, wouldn't work, not to try it and that it might work by several different employees. I bought it since I could try it and exchange it for an AXT if it didn't do this properly.
I now have an Epson 2200 and a Brother MFC 9700 connected and printing perfectly. They both show up as Bonjour printers. The only problem I had was adding the 2200 to one of our computers. For some reason I kept getting errors at first. Then I hit the Auto Select button for the drivers and it added properly. I don't know why this happened, since I used the default all along, there you go.

Multiple Printers on one AE?

Similar Messages

Maybe you are looking for