Multiple Problems during and after Factor Reset

Hi, I am using the mobile for the past month and had a great experience using it. the phone was good in every context. recently I just had to do a factory reset and when i was doing the reset for the first time, it took about 25 min or so which is too long. After the reset I started noticing so much lags whenever i try to perform multitask or play a normal 5mb game. Also the phone takes about 5-6 min for a normal restart which it did in 1.30 min previously. The battery backup is reduced to 19hrs from 38hrs. Experiencing heat problems too I have the phone updated to S144. No new apps installed. Is there anything you can do about it? Thanks in advance

Bought a G5

Similar Messages

[svn:fx-trunk] 5473: Fix for bug around handling of constraints during and after effects were run , both for old and new effects.

Revision: 5473
Author: [email protected]
Date: 2009-03-20 16:02:58 -0700 (Fri, 20 Mar 2009)
Log Message:
Fix for bug around handling of constraints during and after effects were run, both for old and new effects. Fix was to correctly record and handle styles that were set or not set in either state and to temporarily set width/height values for the duration of an effect if we disabled the relevant styles that affect width/height.
QE Notes: None
Doc Notes: None
Bugs: SDK-17809
Reviewer: Jason
Testing: checkintests, Mustella Effects, ListDataEffects
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17809
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateInstance.a s
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as

Revision: 5473
Author: [email protected]
Date: 2009-03-20 16:02:58 -0700 (Fri, 20 Mar 2009)
Log Message:
Fix for bug around handling of constraints during and after effects were run, both for old and new effects. Fix was to correctly record and handle styles that were set or not set in either state and to temporarily set width/height values for the duration of an effect if we disabled the relevant styles that affect width/height.
QE Notes: None
Doc Notes: None
Bugs: SDK-17809
Reviewer: Jason
Testing: checkintests, Mustella Effects, ListDataEffects
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17809
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateInstance.a s
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as

I 4 is hanging multiple times during the day. have reset, reinstalled IOS7, the prob persists. taken to the pphone to the service centre. they reset it too. the problem stands. whatr to do next???

i 4 is hanging multiple times during the day / restarting. i have reset, reinstalled IOS7, the prob persists. taken to the pphone to the service centre. they reset it too. the problem stands. whatr to do next???

Hi Suzy Q,
I can send and receive calls.
I get "messaging stopped" when doing a lot of texts.
Texts come up "ghosted" meaning they have the text on the bottom and a transparent one overlaid on top. they then become one. But I get the ghosting most of the time when I go into a message from a contact to send a text.
When I go to call logs or text logs, the numbers come up first, and then then the names pop up randomly, meaning not in order down the page, until they are all shown. lots of lag time.
It runs slow.
I have 5 apps on here. I should be able to have a lot of apps on here, and play music, and have files, and...and....and.
I can get online but doing a Google search, when the page with the choices comes up, it is blurred and I have to tap on the screen for it to become clear and readable.
When online and scrolling, it hitches sometimes/lags/gets stuck then unstuck
I get VZWAVS has stopped. (not sure if those are the right letters)
The status bar that is supposed to be gray with the new update, goes back and forth between green--the old os--to gray. And I have found no continuity with when I get green or when I get gray.
I get a black screen on occasion.
sometimes the proximity sensor doesn't work.
sometimes when I have my bluetooth on and have "hands free mode" on, I get the a text message read through the headset and also through the handset.
I soft reboot often--turn it off wait a bit and

Problems configuring router after hard reset

I'll start with my 'vitals' ---
* WRK54G Wireless Router
* Cable internet
* Desktop computer is wired to the router
* Roku media player - wireless connection (will play my mp3s off of the computer or listen to internet radio stations)
* Tivo wirelessly connected
This morning, I tried to play some music off of my computer on the Roku media player. It would not communicate with the computer, but it would find the internet stations. After some trial and error, I tried to make the Tivo connect and it also failed to find the computer. The computer itself also could not find the internet, but the Roku was streaming music from the 'net fine. I exhausted my limited networking knowledge and decided it was time to bite the bullet and do a full restart on the router.
I turned off the computer and the router. The modem has a battery backup so I reset it and while it was booting back up, I plugged the computer into the modem. Once the computer started, the internet was up on the computer and felt encouraged. I found and ran the install disk that came with the router and followed it step by step. After getting a few more errors, I got the setup program to find the internet through the router and I could proceed to the next step. When I got to setting my time zone, an error came up that the modem could not be configured and I should hold the reset button again for 10 seconds. I felt discouraged again. I reset it, and nothing. Tried again nothing. It will not get through the guided set up, but the internet is apparently working.
I thought I would just get into the web-based set up page. I can log in with the default password and get to all of the screens, but whenever I try to save changes (whether I made any or not) the password box comes back up and the default password (or any password I tried to change it to) will make it go away.
So basically, my problems are: 1) the guided setup will not finish 2) the web-based setup will not let me make any changes because it does not recognize any password.
Thanks for any help in advance...
Chris
PS -- after I post this, I am going to reset the computer again and unplug the internet from the router just to see if I can get the web-based setup to work. I'll post the results, one way or another.
Message Edited by structuralpoke on 08-18-2007 02:01 PM

I, and others in this forum, have had problems saving Linksys router settings too. I logged into my router fine, but couldn't save the settings without a password screen coming up. No password is accepted. I contacted Linksys Help and received no solution. I looked on this forum and saw mentioned that the problem may be with Norton Internet Security (NIS). One person said they just temporarily disabled NIS and then they were able to save their router settings before reenabling NIS again. I tried that, ended up turning off every setting in my NIS, rebooting with them off, etc, but it didn't help with the ability to save my router settings. I have NIS 2007 and the NIS Add-On pack (needed because for some reason Norton took away features from previous versions and after people complained they made them available again with the add-on pack). I planned to remove all of NIS (after I made notes of my modifications), and started by removing the NIS Add-On pack first. After a reboot I tried to save my router settings and it worked! Phew. I got them all set and tested, then I installed the NIS Add-On pack again and all is well. When I saw people had made comments on this forum about this problem for 8 months at least I was disappointed that Linksys Help hadn't already been aware of the problem and able to give the solution.

Role of PI developer during and after upgade SP in PI

Hi PI Gurus,
Can any one guide me, what all the activities I need to keep in mind before and after going upgade to SP.
We are currently using PI7.1
The interfaces which are in QA system, are they going to be impacted? Can I transport objects during upgrade, or i have to wait for upgrade of all the 3 systems.
Regards,
Krishna

Hi,
Before starting SP upgrade, Unregister the queue in SMQR and close all the communication channels.
After upgrade, we have register the queues and start the CC. Test all the channels for the connectivity.
Check all the links in RWB i.e alert inbox, message monitoring etc.
Regards,
Krishna Chauhan

[Dell E5510] Blank screen during and after boot

Hello,
I performed system update some time ago (2 or 3 weeks) and left my computer unused. Today I tried to power on it and I was very surprised, because I didn't see anything on screen during boot and after it. I rebooted computer in fallback mode (I also added "i915.modeset=0" to kernel init args), and I saw command line. Then I updated whole system and rebooted it again - no luck again blank screen during boot and after.
I rebooted it one more time, but with default kernel (I disabled KMS again via GRUB command line) and I saw systemd output during boot. I teems, that all services were started successfully, because all messages were prefixed with "OK". Then I cloud only use command line, because Gnome 3 was not running under seventh console.
Any idea what is going one here?

Hi there Sudarshan21,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W.

Why does my Windows Vista computer say the wrong iPod Touch name? I have multiple iPod Touches and after updating one of them, Windows Explorer says they are all the same name now.

Sorry for the exceedingly long title...
I have multiple iPod touches, and I just updated one of them to the newest iOS (5.0.1). Now whenever I plug in any of the others, the name of the one I updated appears in Windows explorer. How can I make Windows able to determine which iPod is which again?
64 bit vista home premium.

iPod Classic are high drain USB devices, I hope you are not trying to connnect them simultaneously to iTunes, which will definitely hang your USB Host controller, thereby freeze iTunes.
But here is an Apple Support Article on using multiple iPods for iTunes.
http://support.apple.com/kb/HT1495?viewlocale=en_US
Have nice day!

A DIFFERENT problem with Maps after Hard Reset

Was advised to hard reset my phone after it started going crazy with data which I did using the advised *#7something# method.
Nokia Maps is fortunately still there upon reset. Phew. Although when I open it it starts downloading mad amounts of data.
All my maps are gone. it appears my mass memory got kind of messed up in the reset - it deleted a lot of the data off the mass memory, but left some of it. Example - my music files all went, but the directory structure remained. My photos remained, but Nokia doesn't know when they were taken.
I have tried connecting my phone to my PC and opening maps in Ovi Suite ... and it says 'cannot find maps or voice guidance files in your device', and I appear to have no option to re add them.
There is an 'open help' link below the message ... which opens a blank help page in my browser. Useful.
Can anyone help?

This has occurred the entire time I have owned the iPod. I only discovered iLyrics about 2 months ago. I don't believe iLyrics is to blame.
In general, the lyrics are in English and do not have special characters. This is a good suggestion though. I'm going to pay close attention to see if I can find any weird HTML bits showing up. It seems to occur about 70% of the time. I've assumed that it is completely random, so I'm going to pay closer attention to see if some songs work 100% of the time. Interestingly, it never goes wrong 100% of the time either. It sometimes takes 4 or 5 tries, but eventually I'll be able to scroll through the entire song.
I'm getting the impression that this is NOT a common problem....

N8 problem before and after ANNA update

Dear Gent's in Nokia,
Me and my 2 friends have same mobile "nokia N8". When we purchased phones we have had one very annoying problem , phone resets 1-2 times during the 48hours and always happens when we try to call someone . We have been patient and waited for ANNA update . Finally when arrived we have updated our phones and now we have similar problem ,it's connected with calls again.When we try to call someone phone does'nt resets it says "Call not allowed", this thing happens randomly at least once a day , then we have to turn the phone off and then turn it on so we can make calls again. It happens on three N8 same problem.
Can somebody help us with this problem?
Thank You in advance

Nokia made it possible to re-install the ANNA software,
Connect to OVI SUITE 3.1.1.9 (Updated version 20 September 2011)
Search for new updates
& select : re-install
see more about this issue :
http://forums.techarena.in/portable-devices/1430136.htm

Lost I Tunes libary after factor reset

Due some minor/major problems after non use for some months,the I Tunes libary was lost / hidden somewhere? I have looked up many many websites regarding this but nothing works,I can not find any screens showing anything. even my Ipod.I have connected the Ipod to my laptop but no screens appear to ask me import the tunes.I had to do a factory reset to get things working properly after the laptop was not used for a long time.I keep printing paper but the more I print the more I get a little confused.I would say the I Tunes libary was working alright just before the new year and also the ipod.Can anyone help.it may be a simple answer or something more complicated!Thanks.

If your media is not in your iTunes library or your computer or on the iPod it is gone except maybe:
No content shows up in iTunes after updating
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

SPA112 FW bug confirmed: registration broken during and after outbound call

After receiving and configuring my new SPA112, everything seemed to work out just fine: registration to the SIP proxy, inbound calls, etc. However, at some point I discovered that outbound calls would typically only work for a certain amount of time, after which the connection to the callee would be lost, just like the my registration to the SIP proxy. In the SPA112's Web interface, the device reports "Registration State: Failed" in such cases. Only a reboot of the device will result in a successful registration again. Firmware version: 1.3.5(004).
To diagnose the problem, I enabled both syslog and debug logging and started capturing and analyzing what is going wrong:
[Before call]
SIP.REGISTER
SIP.TRYING
SIP.UNAUTHORIZED (with nonce)
SIP.REGISTER
SIP.TRYING
SIP.OK
Also the debug logging reports "LOCAL3.DEBUG: [0]RegOK. NextReg in X".
So far, so good.
[During/after call]
We see two (periodic) registration sequences:
SIP.REGISTER
SIP.TRYING
SIP.UNAUTHORIZED (with nonce)
LOCAL3.DEBUG: SIP_tsClientEventProc(event: 28)
LOCAL3.DEBUG: SIP_regTsEventProc(event: 28)
LOCAL3.DEBUG: SIP_tsClientEventProc(event: 28)
LOCAL3.DEBUG: SIP_regTsEventProc(event: 28)
LOCAL3.DEBUG: SIP_regTsEventProc(event: 28)
LOCAL3.DEBUG: SIP_tsCreateClient()
SIP.REGISTER
SIP.TRYING
LOCAL3.DEBUG: SIP_tsClientEventProc(event: 28)
LOCAL3.DEBUG: SIP_regTsEventProc(event: 28)
SIP.OK
LOCAL3.DEBUG: SIP_tsClientEventProc(event: 28)
LOCAL3.DEBUG: SIP_regTsEventProc(event: 28)
LOCAL3.DEBUG: [0]RegOK. NextReg in X
Which is OK and the same as before the call. This one is however shortly followed by the following (second registration sequence of) debug messages:
LOCAL3.DEBUG: SIP_tsClientEventProc(event: 4)
LOCAL3.DEBUG: tryAltIp_delay()
LOCAL3.DEBUG: RSE_DEBUG: getting alternate from domain:<proxy>
LOCAL3.DEBUG: SIP_regTsEventProc(event: 4)
LOCAL3.DEBUG: SIP_regTsEventProc(event: 32)
LOCAL3.DEBUG: 2. RSE:GetServerAddrErr(<proxy>,0)=-101
LOCAL3.DEBUG: SIP_tsCreateClient(), 1781, uiTmrF=1600, SIP_TMR_F_INIT=1600
LOCAL3.DEBUG: [0]Reg Addr Change(0) 29dfc552:5060->0:5060
LOCAL3.DEBUG: tpError at [SIP_tsCreateClient:1817]
These two registration sequences (regular SIP messages at the one hand and the debug messages at the other hand) are alternating, and the succesfull registration is followed by the failing registration in a short time, so most typical state is "Failed".
Any suggestion on what I could try to solve the issue is welcome!

I'm able to reproduce the problem in my test lab.
It seems that device can't fetch IP address of the SIP proxy from it's internal cache during active call (GetServerAddrErr error -101). And the issue doesn't solve in full even after the calls end.
It is not networking issue between device and DNS server as no DNS query has been issued (the IP address is cached from previous query that has been responded successfully).
As a workaround I configured proxy IP instead of name.
It work.
It seems we hit (another) firmware bug.

Problems before and after Uninstall and re-install CS4

I went ahead and uninstalled and re-installed CS4 because of freeze ups and other difficulties. Program After Effects is now crashing - see attachment. There is also a problem with an importer plugin (I think) may be related. I can't tell. I have not tried any other projects. I did however, disconnect the Matrox MX02 Mini, but still had problems. The MX02 is now re-connected.
I wonder if installing CS4 on top of CS3 is an issue? I remember having a similar problem goiing from CS2 to CS3. I had to downloader a cleaning utility from Adobe (I think) to remove every bit of CS2 and then run CCleaner.
It's my own fault - trying to upgrade software and hardware at the same time. It's hard to isolate. For now, I'l just have to do with Premiere since it is working. But, I'd sure like to know what's going on.

Did you re-install all other Adobe products as well? If not, then that may be the problem. Uninstalling/ reinstalling only one of them messes with MediaCore and certain otehr functions. The quick fix is to download the manuala (!) update packages for After Effects, Premiere Pro/Encore and Adobe Media Encoder from the support pages and run them. This usually bends things in place. If not, then you will probably have to uninstall again, this time including every Adobe app, use the CS4 Clean Script and reinstall.
Mylenium

CS5 reinstallation problem on Mac after factory resetting

I have recently returned my Mac Air to factory setting and installed SSD card.
I am now unable to open all raw files through Bridge or photoshop after reinstalling from disc.
I get this message that is telling me that Raw can't open files because camera is not supported by current version of installed Raw? I have uninstalled and reinstalled restarted computer etc and no joy..I have downloaded Adobe Extension manager and it does not help...
It was working perfectly prior to reinstalling. Can anyone guide me on what I need to do

After downloading CS5 I ran into multiple permissions errors, this is no exception.
The following folder needs Read & Write access:
Macintosh HD:Users:(Your User Name):Library:Application Support:Adobe:Adobe Illustrator CS5
You can change this access by selecting "Get Info" on this folder, then adjust the Sharing & Permissions options so everyone can Read & Write.
NOTE: This addresses the startup profiles only; crashing on quit is a separate issue.
When you open up Illustrator this time and try to create a new document, Adobe magically creates a "en_US" folder within the Adobe Illustrator CS5 folder that couldn't be added before.
Mac OSX 10.5.8

Blue screen error (BSOD) during and after installation of Windows 7

I had to reinstall Windows 7 via the recovery partition. During the installation I kept getting Blue screen errors and even now I am still getting BSOD within minutes. I have no problem in safe mode.
My laptop is a Satellite C650D-12C. I wanted to update BIOS but I can't in safe mode. What should I do next?

Recovery image saved on HDD is tested so everything should be OK with recovery image installation.
What you can try is to use Microsoft installation disc to see if the same will happen again.
If yes, Im afraid you need professional help with this. Notebook has probably valid warranty so the service guys should check this.
Have you created recovery DVD?
BTW: I think BIOS update is not solution. Recovery installation must work with this original BIOS version.

PLEASE HELP -- iTunes Match - multiple problems, desktop and iOS

I've been going round and around with this issue for the past couple days (yes, I've been dedicating that much time to it) and finally went to the Genius Bar today to get help and even they were stumped. Hoping someone here can shed some light on the situation. Next stop, express lane for support.
Broad Problem:
I paid for iTunes Match around 6 months ago and activated it on my desktop.     Since then, I've had nothing but problems across my desktop and 4 seperate iOS devices (3 iPhone 4's, and an iPad 3). The basic sympton on the desktop is that iTunes itself frequently freezes (Option-Command-Esc reveals "Application Not Responding") and requires a force quit.   As soon as I turn OFF iTunes Match, this symptom goes away. I can leave iTunes open for hours without any problems. As soon as I turn it back ON, then the problem comes back -- sometimes iTunes won't launch at all (crashes before bringing the UI up), and other times it's the same freeze that requires a force-quite. Quite frustrating.
On the iOS side of things, the situation isn't any better.   When I toggle on iTunes Match and then enable "Show All Music" in the Preferences of the iPhone, then I get any one of the two following scenarios:
A) The Music App simply won't load. It tries, goes to white, and crashes back to the home screen of my iPhone.
B) If I'm lucky, the Music app will launch and I can see my entire library in the cloud as intended. The problems start though when I go to actually download/play songs from the cloud. Typically, the songs will start playing but I will eventually get an error message that alerts me that there was "Problem Downloading Track". When I then go into the Download Que of the iTunes Store (again, still on the iPhone), it shows the entire list of songs that I had wanted to download and shows them at various stages of download completion -- even if they have actually completely played on the phone itself.   Sometimes they will time out and display the "problem downloading track/try again" status, and other times the progress bar sits at about 99% with a status of "Processing".
What's particularly strange about scenario B is that I've tried to download a variety of songs to different devices -- my wifes iPhone 4, my iPhone 4, an iPad, and a iPhone 4S that the person at the Genius Bar had me use as a tester.   When I tried the iPhone 4S at the genius bar, I was amazed at how fast it downloaded to the device. This had the genius bar guy wondering if it was a problem with my phone itself or with the iPhone 4 in particular.   Unfortunately he didn't have a spare iPhone 4 to test with so I had to go home and test with my wife's iPhone 4. Again, she had the same problem.   The status bar hangs at about 99% showing a status of "processing", even though I have completely listened to the track within the Music App. The same scenario happens on the iPad as well.
Okay, if you're with me so far: here's where things start to get REALLY strange....
On MY iPhone 4, when I run into problem A or B, the only fixable solution for me has been to go into Preferences and toggle OFF iTunes Match, completely shut down the phone, restart the phone, and then launch the Music App, at which point I can see the music that has loaded to my phone.    The kicker here is that even though I've turned iTunes Match OFF and completely powered down my phone, when I go into the Music app I can ALSO see my ENTIRE iTunes Match library, completely with cloud status icons.   It's as though I never turned off iTunes Match at all. In fact, I had to triple check my own preferences to verify that it was turned OFF, which it sure enough is.   I can even go and attempt to download songs, with various levels of success based on the problems above.
Now, on my WIFE's iPhone 4, when I run into problem A or B, I tried the same process in tandem with the phones side by side as I did the test -- turn iTunes Match OFF in Preferences, power down the phone, power up the phone, and launch the Music app.    However, on her phone, when this happens the Music App shows what is to be expected -- only the music that is on the phone itself.
Okay, there's a lot to digest here, but here's the synopsis: my phone and my wifes phones are behaving differently when displaying iTunes Match, with my phone appearing to completely disregard the status of the On/Off Toggle within Preferences-->Music, and my wifes phone behaving as it should, at least in terms of what it displays.   The download problems are present on each device and the iPad is also behaving like my wifes phone.
Given all of these inconsistencies and irregularities across devices and platforms -- MacBook Pro running Lion, separate iPhone 4's each running iOS 5.1.1, an iPad running iOS 5.1.1. and an iPhone 4S running iOS 5.1.1 - my suspicion is that:
A) I've got a corrupt iTunes library file residing in the cloud
or
B) iTunes Match is having a hard time reconciling my Apple ID across so many devices (possibly complicated by issue A)
The bottom line is that I have paid for iTunes Match and have never been able to use it successfully or with any predictability.
I'm wondering if anyone else has any symptoms that match any of this and/or have come across a corrupted file in the cloud and, if so, how to remedy the situation. Since it's in the cloud, I can't do anything about. I can't even see it. Most troubling.
Note:
When I went to the Genius Bar, they had me do a complete restore of the phone (not from backup) to elminate any corrupt files within the phone itself. Even that didn't solve the problem.   That's when he brought out the 4S phone to test on and we were both so shocked at how blazingly fast the songs downloaded, error-free. That phone was able to download 8 songs completely before one song downloaded to my phone sitting right next to it. Both on the same Apple Store network and both downloading the exact same tracks using my Apple ID and login.   While it's tempting to say that the 4S is faster than the 4, I don't think it's 8 times faster with download speeds over WiFi.   However, even if the speed/completion discrepancy is because the 4S is superior, it doesn't explain the mind-boggling disparity between my wife's phone and my phone -- both iPhone 4's and both running the same iOS.   Throw in the oddity of iTunes on Lion crashing whenever iTunes Match is on and this all seems to point to some corruption in the cloud that perhaps the 4S device is able to bypass...for whatever reason.
Please help. This is nuts.

Exactly same problem - any ideas - I get error message 14

Multiple Problems during and after Factor Reset

Similar Messages

Maybe you are looking for