Multiple problems on G5 that equal on big problem(usb,leopard,Blue screen)
I have a dual 2.5 I've had for years no problems I couldnt fix...
Recently I fryed the usb ports it's wierd my treo works on the but nothing else. So I buy a usb card..... Only problem is the card powers on after mac starts so no reseting pram starting in safe mode or any of the fun things I enjoy.... Now I install leopard.... and bam the unsanity ape(i've been researchin on google) freezes my computer.... And there's not I thing I could do...
Any ideas or help, Someone please
J
As far as I can see, resetting the power manager on this model of iMac involves resetting the SMC, which is unplugging all cables for 15 seconds, plugging back in and powering up. Tried that too, same result. In terms of third party software, nothing. Clean Leopard install is the lot.
Similar Messages
-
Is this a big problem or one that will go away? Small lines on screen
I have a row about 2 or so pixils big, halfway across my screen. You can barely notice them on the background, and I dont notice them when I move my safari window over it. But I have changed my desktop background to different things, solid colors, photos, random photos apple had in there, and the lines were still there.
It is about 4 rows, very thin, different lengths, right side, just below the center of the right side of the screen.
Is it the beginning of a big problem? I was thinking of calling up applecare then going to an apple store to have the screen replaced.Thanks. I will back up my data this wednesday, install snow leopard on friday (i doubt it would do any fixing... want to see it though, cant wait to install it :P). Then on the 8th I will schedule an appointment and go to the apple store. That way I can make 1 trip. I plan on getting my ipod touch replaced, the battery for some reason doesnt hold a charge too well, last night on wifi the youtube app drained 25% in 20 minutes.
-
HELP PLEASE!! Boot problems with Snow Leopard (Blue Screen Loop)
Hi guys!
My MacBook (the model before the current one) wont boot up. It started stuttering and acting strange and then froze so I did a force restart. It then loaded all the way up until a blue screen when the mouse appears and can be moved. This flickers off after a few moments (the screen dims) and then comes back. The process repeats as if in some infinite loop.
The main problem is that I've lost my snow leopard disc so I'm pretty limited to what I can do until I can borrow / buy another one and I need to get my laptop back up right away for work.
I've tried booting in safe mode, no joy
I then tried to repair the drive in fsck, which repaired something. I did it again and it said all was ok but then booting stuck at the same place.
Finally I read on another forum that removing /Library/Preferences/com.apple.security.plist fixed login loop issues. I attempted this in single user mode but it said the file didnt exist?
Can anyone help me out here? I'm pretty stressed out as all my work stuff is on there for my new job...
Thanks!!I had this same problem -- machine would boot, but loop at two blue screens before the login window. I sshed into the machine and checked /private/var/log/system.log and /var/log/secure.log which showed a unexpected character in /etc/authorization. Basically, the authorization file was corrupted (most likely by bad RAM.) The solution was to replace this file with one copied from another machine. I didn't match models, but did match OS when copying the file (i don't know if this matters at all), and as soon as the "cp" command was entered, the login window popped up. <-- totes awesome. The machine has been reliable since (all of 15 minutes)
-
Bug with Lightroom 4? - Big problem in the keyword list!!
Hello guys,
I am Rafael Rojas, a nature and landscape photographer. This is my first post, trigered by a quite bothering problem I am having with my LR...So hello everybody!
I upgraded to LR 4 a week ago. Today I realized many of the keywords I have installed in Lightroom do not appear on the keyword list (basically all keywords after the letter S). Moreover, half of the keywords which appear on the list are not editable: that is, I cannot assign them to the selected image (by clicking on the left box), or I cannot double click them or right click them to get the Edit panel. All the rest of keywords (those which appear on the list on top), can be edited and there is no problem.
When I export the keywords as a .txt file (in metadata, export keywords) I can see that all the keywords are there. When I try to write some of them on the box LR recognize them and adds them automatically. However, I just cannot see them on my keyword list or just cannot edit them.
The reason I want to edit the keywords is because many of them got desactivated while upgrading (something more people have reported). Right now, I cannot send my images to my stock galleries, since many of my important keywords are not active, and I just cannot edit them...
Can you help me please?
thanks so much!!
rafaelWell, 64 bits.
And yes, it seems when I erase one keyword, the list "shows" one more below...so it seems the problem is related to a certain limit in number.
That would be still a problem I could live with, the big problem tough is that many of the keywords got "deactivated" alone by Lightroom (see problem here described http://www.backyardsilver.com/2012/02/strange-behavior-with-capitalized-keywords/) and that means I NEED to edit some keywords which are really important and which are not active. Otherwise, when I export the images those keywords are not embedded...
Any thoughts?
Rafa -
Big problem with new WD Caviar Green HDD, please advise!
I bought a new Western Digital Caviar Green HDD 1TB, ( WD10EADS ) it is a SATA 3Gb/s interface HDD, 3.5-inch form factor. the RPM = IntelliPower (NOT 7200 RPM or 5400 RPM which means Rotate automatically depends on the needs of fetching data I suppose?)
I acknowledged that this series of HDD which three of 6 have the same Power Management which Read/Write = 4.9W / Idle = 2.8W / Standby = 0.4 W / Sleep = 0.4W
They are differ from the other 3, which 500GB one is 4.1W / 2.2W / 0.8W / 0.8W and 1.5TB is 4.73W 2.75W / 0.72W / 0.72W; 2TB is 6W 3.7W 0.8W 0.8W
Which mean the Standby and Sleep mode are the same state.
Now my big problem is, I bought an external dock SI-7908UI for this WD Caviar Green HDD.
( http://www.ssi.com.tw/product_content.aspx?id=92 )
So I first put the HDD into the SI-7908UI Dock ( USB 2.0 / eSATA / Firewire 400 /800 )
I tried many way of sequence of who power on first? WD Caviar Power on first? or Mac mini Power on first? I found that the best way is Mac mini Power on first, then Power on the external HDD.
OK, before I address my big problem, I should let you know, I found that there is NO S.M.A.R.T. working when you put a S.M.A.R.T. HDD outside the Mac or PC. In Dock, the S.M.A.R.T. won't work, That's how I saw in System Profiler, the FireWire tab says " S.M.A.R.T. status: Not Supported "
and I did test a Non-Green Maxtor HDD, the S.M.A.R.T. doesn't show either. You'll need this info before the real problem I'm gonna say in the following.
NOW, about 10~15 minutes after my Mac mini boot, if I didn't fetch anything from my external HDD, it would goes to sleep itself, that confirmed that the Specification Sheet was true, the Idle = 2.8W and I believe it goes to Idle, NOT Standby or Sleep, which I also believe the Standby or Sleep signal is supposed to be given by Mac OS, but it sounds like Standby or Sleep, BECAUSE the WD HDD suddenly not rotate and the sound it appears that it goes to SLEEP, am I right? I keep Mac awake by browsing the web so Mac mini won't go to sleep (I set 10 minutes in Energy Saver and I checked Put the HDD to sleep when possible)
Well, That is my big problem when WD Green HDD goes to sleep, because I CAN'T wake it up, NOT eject or Shut down the Mac mini. (OK, I'm NOT sure if it goes to Sleep or Idle)
First I thought it freezes the whole Mac OS, then I found I still can move many things, such as I am doing right now, post this big problem here. but I am sure the others are freeze! and no matter how many time I click Shut Down or Restart or Force Quit, the Mac mini didn't respond.
I tried to figure it out because I don't want to Shut Down by force.(5 seconds Press the Power button)
then I found that if I power down the external dock 7908-UI when Mac fail to shut down/restart/or eject the external HDD, It worked.
And the Mac OS will appear a window says that "I shouldn't unplug an external device without Ejecting it first" something like that. and suddenly it shuts down very quickly, everything back to normal, it shut down successfully.
What am I gonna do with this? Am I going to power down my external HDD first every time I want to shut down/eject/restart? Because the Eject the external HDD will cause freeze too! Freeze Finder I suppose.
Is it caused by 7908-UI ? or Caused by WD Caviar's Green Power management?
Because I don't trust 7908-UI, it doesn't look like a trusted brand, I've never heard of this SSI company anyway.
What am I gonna do? Please advise.
Thanks in advance.Please realise that I am not the right person to be asking. I pointed you to a thread where, as a Moderator at the Bombich forums, I felt the need to warn users of CCC that a WD drive might cause problems. The thread mainly just copies what WD have said.
Obviously your drive will respond/awake/spin up when you access it manually. Some of the problems are...
• Most users want to be in control of whether and/or when a drive sleeps -- WD's auto-sleep cannot be disabled and so precludes that.
• Most users want their drive to obey settings in Energy Saver -- the WD auto-sleep mechanism doesn't allow that.
• Most users want a scheduled cloning/backup to take place during the night. The cloning app starting the backup process should cause the target drive, if sleeping, to wake/spin up so that the process can take place -- it does for all drives except WD drives where the auto-sleep mechanism used doesn't allow it. LaCie drives, for instance, have auto-sleep +as an option+, during which the drive will respond to Energy Saver settings and to software such as a cloning app.
Please, Mauricette, put you questions/concerns/problems to the reseller or to WD, both of whom took your money without warning you. I am NOT a WD expert! ...or lover! ( ) I became more than disenchanted when I saw that a) WD do not point out the limitations of their external drives at point of sale, and b) WD put the blame for these inadequacies/problems/limitations onto Apple, ignoring the fact that no drives other than WD drives have them.
Andreas -
Blackberry Desktop Software (Roxio, specifically) causes network problems and blue screens.
I'm posting this note because I just solved my network issue/crash problems. I started experiencing lots of disconnects and page not found on my office computer over the past few days. Only thing I could think of that was different lately was that I installed the Blackberry Desktop Software. Then a huge lightbulb went on over my head. I remembered when it was installing, it said it was installing "Roxio" software and at that moment shivers went down my spine from past experiences.
Well, I have lots of good "bad" experiences with Roxio CD software which had caused these same problems on two of my home computers. It caused blue screens when used in conjunction with my wireless Netgear card and also standard network card. The same symptoms including very slow internet access, general machine sluggishness, etc. I was trying to chase this down for months til I finally removed the Roxio crapware and ALL problems went away. No more slow machine, no more page not found and no more blue screens on two of my computers. Now, on a completely different Toshiba work laptop and different network adaptor, same problems.
So, here we are again with Roxio as part of Blackberry Desktop software. I like my new Blackberrry 8830, but I have to pass this along to the Blackberry folks because I KNOW I'M RIGHT about this. I only installed the software so that I could type my contacts into Outlook and then download to my Blackberry. So, after realizing the common symptoms and after having completed my download (which worked great by the way), I removed the Blackberry Desktop Software and I'm back to speedy everything, no more pages not found, no more putty disconnects, and no more blue screens.
I hope someone gets good use of this post because this drove me crazy the first time around.
-- JeffWe had the same problem.
We did extensive troubleshooting, and found the problem was effecting our new HP Windows XP .Laptops.
We did not have any trouble with the Older Dell Latitude we have.
We found the BSOD still happened after removing the Black Berry Desktop Manager Software.
We traced it to a memroy / resource leak in the USB subsystem.
The workaround we found is to go into the Device manager, and remove all the drivers from the USB section.
** Disclaimer : This works for us, but may make your computer unusable. Backup your data to external storage.
Back up your computer
Start -> control Panel -> system ->Hardware tab -> Device manager.
Expand "Universal Serial Bus Controller" at bottom of list.
Right click on each Item, and select "uninstall"
Don't reboot after each one.
* Remove ALL the entries under Universal Serial Bus Controllers *
Repeat until all the entries under "Universe Serial Bus Controller" are removed
(there may be one that sticks, thats ok. so long as it has been uninstalled.
Reboot.
The OS will rebuild the USB stack and drivers to default.
This has worked for us so far.
We are not sure if this wont break something else. -
Just updated to itunes 12.1.0.71 - big problem - can no longer access the legacy "Get Info" where you could change multiple files, easily add artwork, add album name for TV show, and much more. In previous iTunes 12 you'd right click and hold shift key and be able to get to it. Anyone figured this out?
The "legacy" metadata editors, for which there was a "back door" in iTunes 12.0, have gone from 12.1. However, the revised editors in 12.1 provide access to (almost) all the metadata elements that were available in iTunes 11, albeit in a different layout and with some additional constraints based on media kind. Some users have / will have an issue with the statement that "Get Info has been completely redesigned in iTunes 12 to focus your attention only on what’s necessary for the selected item" since that removes some metadata elements that people may have been using in creative ways. iTunes 12.1 basically gives you access to the fields that Apple think are necessary ... . Some of the things that have been excluded by this rule:
track and disc number fields for video media kinds
show and episode fields for music
description tab for audiobooks made up of more than one file
Obviously the first two examples can be regarded as "overloading" the metadata elements - i.e., using them in ways that the designers didn't intend - but given that some users do find valid cases for this it's a shame that they've been deprecated in the new UI. There are couple of workarounds:
in songs view (or any of the other columnar views), you can still select any fields to display, independent of media kind, and these can be edited (though only one at a time) by double-clicking in the relevant "cell"
you can (temporarily) change the media kind of an item (or group of items) to get access to metadata elements that would otherwise be inaccessible.
It may be worth submitting an issue via https://www.apple.com/feedback/itunesapp.html - I can't see it as a huge development task to have a user preference to switch between "show all fields" and "filter fields based on media kind".
One other oddity/irritation is that some of the tabs don't, by default, show all the available fields - you need to scroll up/down to access them or to expand the window by dragging on one of its corners. Fortunately, the latter seems to be persistent - once you've done this to make all the fields visible the editor will open at the same (larger) size when opened again. -
hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problemThere is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it
-
Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer? -
I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.
Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue. -
When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine in my house, but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server. Do I take it back?
Where is everyone???? Does anyone have an answer???
Allik1 -
I got a big problem that iPlanet 6.0 SP2
Hi,
I got a big problem that iPlanet 6.0 SP2 is in cycle of restart.
The web server's error logs is the following:
[16/Jul/2002:00:30:05] info ( 8545): successful server startup
[16/Jul/2002:00:30:05] info ( 8545): iPlanet-WebServer-Enterprise/6.0SP2 B11/13/2001 00:49
[16/Jul/2002:00:30:09] info ( 8599): Installing a new configuration
[16/Jul/2002:00:30:09] info ( 8599): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:00:30:09] failure ( 8599): Error accepting connection -5928, oserr=130 (Connect aborted)
[16/Jul/2002:00:30:09] info ( 8599): A new configuration was successfully installed
[16/Jul/2002:00:38:14] failure ( 8545): Child process admin thread is shutting down
[16/Jul/2002:00:38:16] info ( 9053): Installing a new configuration
[16/Jul/2002:00:38:16] info ( 9053): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:00:38:16] info ( 9053): A new configuration was successfully installed
[16/Jul/2002:00:38:16] failure ( 9053): Error accepting connection -5928, oserr=130 (Connect aborted)
[16/Jul/2002:00:46:04] failure ( 8545): Child process admin thread is shutting down
[16/Jul/2002:00:46:05] info ( 9496): Installing a new configuration
[16/Jul/2002:00:46:05] info ( 9496): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:00:46:05] failure ( 9496): Error accepting connection -5928, oserr=130 (Connect aborted)
[16/Jul/2002:00:46:05] info ( 9496): A new configuration was successfully installed
[16/Jul/2002:02:43:31] failure (15596): Child process admin thread is shutting down
[16/Jul/2002:02:43:32] info (16212): Installing a new configuration
[16/Jul/2002:02:43:32] info (16212): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:02:43:32] info (16212): A new configuration was successfully installed
[16/Jul/2002:02:43:32] failure (16212): Error accepting connection -5928, oserr=130 (Connect aborted)
You can see child process is shutdown and restart it.
I don't know what's problem is.
And other problem is the following:
[16/Jul/2002:16:10:25] catastrophe (23966): Server crash detected (signal SIGBUS)
[16/Jul/2002:16:10:25] info (23966): Crash occurred in NSAPI SAF NSServletService
[16/Jul/2002:16:10:25] info (23966): Crash occurred in function direct_identityHashCode from module /usr/java1.2/jre/lib/sparc/libjvm.so
[16/Jul/2002:16:10:25] failure (23454): Child process admin thread is shutting down
[16/Jul/2002:16:10:26] info (24006): Installing a new configuration
[16/Jul/2002:16:10:26] info (24006): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:16:10:26] failure (24006): Error accepting connection -5928, oserr=130 (Connect aborted)
FYI, here is our environment:
# /usr/java1.2/bin/java -version
java version "1.2.2" Solaris VM (build Solaris_JDK_1.2.2_07, native threads, sunwjit)
# uname -a
SunOS wagency2 5.6 Generic_105181-31 sun4u sparc SUNW,Ultra-4
Sun Enterprise 450 (2 X UltraSPARC-II 400 Mhz, 2G Memory
If you have any solution and experience, please let me know.
Thanks,
Barney Kim
[email protected]Barney,
from the error log the problem seems to be related to the use of an external JDK. Try reverting back to the original JRE. See if that helps, i.e., the server starts up fine. Use the administration GUI and select Global Settings > Configure JRE/JDK Paths. On the screen that appears, you can configure the path to the JRE. The default would be <server-root>/bin/https/jre.
If that works fine, you might download a more recent version of the JDK. iWS 6 SP2 supports JDK 1.3.1.
Hope this helps.
Best regards
Rodrigo -
My question...
any answers pl.
I have a big problem with my Iphone 4...the pics and videos that i capture, often shows as inverted or orientted by 90/180/270 degrees. photos, one can rotate, but how about videos... is there any way i'm going wrong? this wasn't happening earlierIf I've understood you correctly then the ALLEXCEPT function may be what you're after and it could be applied in a similar way to the following...
=
RANKX(
ALL(Table1),
CALCULATE(
COUNTROWS(table1),
ALLEXCEPT(Table1, Table1[ContactReason])
DENSE
If this has missed the mark, would it be possible to clarify the requirement further?
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com
Blog: http://www.nimblelearn.com/blog
Twitter: @nimblelearn -
I HAVE A BIG PROBLEM I HAVE NOT BEEN ABLE TO RECOVER THE ANSWERS OF SECURITY SINCE THE MAIL THAT APPEARS TO DO THIS MEAN I NEED TO CHANGE THE OTHER SHOULD I DO FOR THE TRUTH WILL MAKE A PURCHASE AND ME THE REQUESTS, AS IS A NEW PHONE EXPECT AN ANSWER PROMPT AND POSITIVE
so I get looks but that is not my email recovery can help you reset your security information by sending a message to your email recovery: j ••••• @ mail.comYou need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(111384) -
I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because when I'm not at home I can't plug in the power.
hi,
I am sending file from server to client i.e client will request for a file and service will send it back....... no socket connection is there...I am using JBOSS and apache axis.
pls help me out.....
Rashi
Maybe you are looking for
-
Site edit not recognizing index.htm file
Going through the Site/Edit function to change server information, DW told me it can't find the index.htm file. Waiting on more information from the host - beside the new IP address, the password has been changed and the upload path. While I'm waitin
-
Error while activating IM in CFM2
Dear Friends, I would like to have a solution to the folowing problem. I've tried to activate integration models in ECC with transaction CFM2. I've build several integration models for class, customer, masterdata and transaction data. When I try to a
-
I recently updated to iTunes 11 on my Windows PC. Since the update, each time I open iTunes its window is too large for my screen. Resizing it is a pain, because I have to change my screen resolution. And then when I restart iTunes, it has reverted b
-
Question regarding Flash builder - mysql
Hi, I created a webapp with flash builder 4.6, I use AMFPHP for the database part. If I want to add a person to the db through my app, which has een accent in the name (for example "D'hiet"), it returns an error. I don't know where to look for this p
-
Can't delete OR find Mal/Phish-A
Hello Everyone, I hope you can help me with a challenge I am having. Currently I have Sophos Anti-Virus Home Edition version 9.2.4 on my Mac (OS X Yosemite 10.10.3) Reason for the post is I have a virus (Mal/Phish-A) that keeps coming up and I am not