Multiple Problems with iPhone 4.

Okay, so about a year and a half ago, I purchased a brand new iPhone 4 16GB. Worked perfectly for about a month, and then it froze up. There was a malfunction with the screen, and Apple confirmed it was through no fault of mine. It was defective. So, despite having all the service plans in place, a full warranty, and EVERYTHING else, Apple gave me a refurb. A freaking REFURBISHED iPhone. Which, had problems with it from the start.
Within a few months, the left speaker broke. Completely stopped working. And I take VERY good care of my phone. Then, it froze up for a while, and kept restarting over and over again. Apparently the same effect happens when you jailbreak it, which I DID NOT DO. Then, the software started deteriorating. The screen became uncalibrated, and for periods of time lasting up to a week, the phone was rendered useless. Sometimes, when I am listening to music, it will randomly skip forward entire songs. And now, no matter how I hold it, people cannot hear during phonecalls that I either make or recieve. Likewise, no matter how I set my ringtones and vibration patterns, it goes back to default. And I turned on the LED light to blink when i recieve a text. It will blink for a few messages, then stop doing it.
What can I do? Apparentley I no longer have any warranties, service plans, or any help services availiable to me at all. What can I do? Should I go to the Apple Store and ask for a new one? Or will I have to pay through the gut for a phone that doesn't work? I want a working phone. That's it. Not the newer 4s, not an older 3. I want a working iPhone 4. Or, a refund.

mattfromma wrote:
Within a few months, the left speaker broke. Completely stopped working. And I take VERY good care of my phone. Then, it froze up for a while, and kept restarting over and over again. Apparently the same effect happens when you jailbreak it, which I DID NOT DO. Then, the software started deteriorating. The screen became uncalibrated, and for periods of time lasting up to a week, the phone was rendered useless. Sometimes, when I am listening to music, it will randomly skip forward entire songs. And now, no matter how I hold it, people cannot hear during phonecalls that I either make or recieve. Likewise, no matter how I set my ringtones and vibration patterns, it goes back to default. And I turned on the LED light to blink when i recieve a text. It will blink for a few messages, then stop doing it.
Okay, so you've been having issues for some time, it all started within months of the initial replacement.
Why are you complaining now? Why did you not address this with Apple when the problems first started?
Based on the initial posting, the device would have still be under the initial one year warranty and would have been replaced by Apple.
As others have already stated, the only option at this point is either an Out of Warranty replacement or a new/different device.

Similar Messages

Multiple problems with iPhone 3GS ( 2yrs old)

The first problem involves my wifi connection. About half the time, my iPhone will just randomly disconnect from my wifi network which is usually about 10 feet away. If it is connected, I only receive 1 or 2 bars on on the screen while my MacBook Pro and other devices all have full strength (as would be expected when only 10 feet away). This makes using wifi on my iPhone incredibly slow. I have tried reseting network settings and all that, but with no success. Any suggestions?
Second, for about a month or two, my iPhone has been having serious problems connecting properly with iTunes wirelessly. I get a wide variety of error messages that include things about how I should connect my iPhone and restore it (tried that, didn't help), something about how it can't properly read the device, etc. While trying to connect to the iPhone, it sometimes causes iTunes to lockup and if I try to use wifi sync from my iPhone, it never finds my MacBook Pro. I also seem to be having problems getting the iPhone to backup to iCloud properly even when it is connected to wifi, plugged in to a power source, and locked (as it tells me to do on the iPhone) or if I try to force a manual backup. It just sits there telling me "Backing up...," but that bar never moves and it never gives an estimate of time remaining. I wouldn't be surprised if these issues were also related to the wifi issue above. Any suggestions for these problems?
I am afraid to ask, but is my iPhone on the way out? Thanks to all that help.

Regarding the wi-fi connection problem, if no change after resetting network settings on the iPhone and/or after restoring the iPhone with iTunes as a new iPhone or not from the iPhone's backup, the iPhone has a hardware problem with the wireless card or something else.

Multiple problems with iphone and itunes

Long time iphone and mac user here. We have 5 iphones in our family and 4 mac computers. I am fairly competent with them. That said we have nothing but problems when trying to get our iphones to sync or update through itunes. Today i had just had enough so i am spending the day trying to resolve all of the random errors we are getting. This isn't up to Apple's usual quality standards. We have an iphone 5 and an iphone 4 synced to a windows 7 64bit. The issues below are with the iphone 5. All software updates for phone, itunes, and pc have been done. I have uninstalled itunes, cleaned reg, then reinstalled just now. (this resulted in new errors...).
Here are my issues:
1. SQLlite.dll error (fixed this one myself by copying the files)
2. The iphone could not be backed up becuase the back up is not compatible or is corrupted error - can't back up iphone manually over wifi or cable
3. The iphone could not be synced becuase the iphone could not be found on the network - this just started when i resinstalled itunes. i've plugged and unplugged the phone about a dozen times, restarting the computer and phone each time. We've had problems getting our phones to sync for a while now but usually we can get it to work by plugging/unplugging over and over again, but not anymore.
Thanks in advance for your help with this.

Okay here's the entire deal it's my gf's Mac and we used to use it together I would sync on her labtop but now we are having issues and she continues to take my phone when I'm sleeping and connect it to iTunes and then proceed to go through all my things. So basically is there anyway I can remove my phone of iTunes or maybe have a pass code on iTunes for my phone so in order for it to be synced there has to be a passcode entered? Or just is there a way to stop this from happening?

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

Having multiple problems with script - NTFS Permissions and AD Groups

Hi, all! I'm having multiple problems with my first script I've written with Powershell. The script below does the following:
1. Prompts the user for a corporate division under which a shared folder will be created, and adjusts variables accordingly.
2. Prompts if the folder will be a global folder or an office/location-specific folder, and makes appropriate adjustments to variables.
3. If a global folder, prompts for the name. If an office/location-specific folder, prompts for each component of the street address, city and state and an optional modifier. I've prompted for this information in this way because the information
is used differently later on in the script.
4. Verifies the entered information and requests confirmation to proceed.
5. Creates the folder.
6. Creates an AD OU and/or security group(s).
7. Applies appropriate security groups to the new folder and removes undesired permissions.
Import-Module ActiveDirectory
$Division = ""
$DivAbbr = ""
$OU = ""
$OUDrive = "AD:\"
$FolderName = ""
$OUName = ""
$GroupName = ""
$OURoot = "ou=DFS Restructure Testing OU,ou=Pennsylvania Camp Hill 4410 Industrial Park Rd,ou=Locations,ou=Camp Hill,dc=jacobsonco,DC=com"
$FSRoot = "E:\"
$FolderPath = ""
$DefaultFolders = "Archive","Customer Service","Equipment","Inbounds","Management","Outbounds","Processes","Projects","Quality","Reports","Returns","Safety","Schedules","Time Keeping","Training"
[bool]$Location = 0
do {
$userInput = Read-Host "Enter CLS Division: (W)arehousing, (S)taffing, or (P)ackaging"
Switch ($userInput)
W {$Division = "Warehousing"; $DivAbbr = "WHSE"; $OU = "ou=Warehousing,"; break}
S {"Staffing is not yet implemented."; break}
P {"Packaging is not yet implemented."; break}
default {"Invalid choice. Please re-enter."; break}
while ($DivAbbr -eq "")
write-host ""
write-host ($Division + " was selected.")
$FolderPath = $Division + "\"
write-host ""
$choice = ""
do {
$choice = Read-Host "Will this be a (G)lobal folder or (L)ocation folder?"
Switch ($choice)
G {$Location = $false; break}
L {$Location = $true; $FolderPath = $FolderPath + "Locations\"; $OU = "ou=Locations," + $OU; break}
default {"Invalid choice. Please re-enter."; $choice = ""; break}
while ($choice -eq "")
write-host ""
write-host ("Location is set to: " + $Location)
write-host ""
if ($Location -eq $false) {
$FolderName = Read-Host "Please enter folder name:"
$GroupName = $DivAbbr + " " + $FolderName
} else {
$input = Read-Host "Please enter two-letter state abbreviation:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter city:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter street address number only:"
$FolderName = $FolderName + $input
$GroupName = $DivAbbr + " " + $FolderName
$FolderName = $FolderName + " "
$input = Read-Host "Please enter street name:"
$FolderName = $FolderName + $input
$input = Read-Host "Please enter any optional information to appear in folder name:"
if ($input -ne "") {
$FolderName = $FolderName + " " + $input
$OUName = $FolderName
write-host
write-host "Path for folder: "$FSRoot$FolderPath$FolderName
write-host "AD Path: "$OUDrive$OU$OURoot
write-host "New OU Name: "$OUName
write-host -NoNewLine "New Security Group names: "$GroupName
if ($Location -eq $true) { write-host " and "$GroupName" MGMT" }
write-host
$input = Read-Host "Please confirm creation of new site/folder: (Y/N) "
if ($input -ne "Y") { Exit }
write-host
write-host -NoNewLine "Folder exists: "; Test-Path ($FSRoot + $FolderPath + $FolderName)
if (Test-Path ($FSRoot + $FolderPath + $FolderName)) {
Write-Host "Folder already exists! Skipping folder creation..."
} else {
write-host "Folder does not exist. Creating..."
new-item -path ($FSRoot + $FolderPath) -name $FolderName -itemtype directory
Set-Location ($FSRoot + $FolderPath + $FolderName)
if ($Location -eq $true) {
$tempOUName = "ou=" + $OUName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "OU exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "OU already exists! Skipping OU creation..."
} else {
write-host "OU does not exist. Creating..."
New-ADOrganizationalUnit -Name $OUName -Path ($OU + $OURoot) -ProtectedFromAccidentalDeletion $false
$GroupNameMGMT = $GroupName + " MGMT"
if (!(Test-Path ($OUDrive + "CN=" + $GroupName + "," + $tempOUName + $OU + $OURoot))) { write-host "Normal user group does not exist. Creating..."; New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
if (!(Test-Path ($OUDrive + "CN=" + $GroupNameMGMT + "," + $tempOUName + $OU + $OURoot))) { write-host "Management user group does not exist. Creating..."; New-ADGroup -Name $GroupNameMGMT -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
# $FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
write-host $BIUsersSID.Value
# out-string -inputObject $BIUsers
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$objUser = New-Object System.Security.Principal.NTAccount($ADGroupName)
$objUser.Translate([System.Security.Principal.SecurityIdentifier]).Value
write-host $ADGroupName
write-host $objUser.Value
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
$ADGroupName = "JACOBSON\" + $GroupNameMGMT
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
} else {
$tempOUName = "cn=" + $GroupName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "Group exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "Security group already exists! Skipping new security group creation..."
} else {
write-host "Security group does not exist. Creating..."
New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ($OU + $OURoot)
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$FolderACL.SetAccessRuleProtection($True,$True)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"Modify","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
My problems right now are in the assignment/removal of security groups on the newly-created folder, and the problems are two-fold. Yes, I am running this script as an Administrator.
First, I am unable to remove the BUILTIN\Users group from the folder when this is an office/location-specific folder. I've tried to remove the group in several different ways, and none are having any effect. Oddly, if I type in the lines directly
into Powershell, they work as expected. I've tried the following methods:
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
In the first case, the script goes through and has no apparent effect because afterwards, I do a get-acl and the BUILTIN\Users group is still there, although when looking through the GUI, inheritance appears to have been broken from the parent folder.
In the second case, I get the following error message:
Exception calling "RemoveAccessRuleAll" with "1" argument(s): "Some or all identity references could not be translated."
At C:\Users\tesdallb\Documents\FileServerBuild.ps1:110 char:5
+ $FolderACL.RemoveAccessRuleAll($Ar)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : IdentityNotMappedException
This seems strange that the local server is unable to translate the SID of a BUILTIN account. I've also tried explicitly putting in the BUILTIN\Users SID in place of the variable in the New-Object line, but that gives me the same error. I've
also tried the solutions given in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ad59dc58-1360-4652-ae09-2cd4273cbd4f/remove-acl-issue?forum=winserverpowershell and at this URL:
http://technet.microsoft.com/en-us/library/ff730951.aspx but these solutions also failed to have any effect.
My second problem is when I try to apply the newly-created security groups, I also will get the "Some or all identity references could not be translated." I thought I had found a workaround to the problem by adding the -PassThru option to
the New-ADGroup commands, because it would output the SID of the group after creation, however a few lines later, the server is unable to translate the account to apply the security groups to the folder.
My first Powershell script has been working well up to this point and now I seem to have hit a showstopper. Any help is appreciated.
Thanks!

I was hoping to stay with strictly Powershell, but unless I can find a Powershell solution, I may resort to ICACLS.
As for the problems with my groups not being translatable right after creating them, I think I have solved this problem by using the -Server parameter on all my New-ADGroup commands and this example code seems to have gotten around the translation problem,
again utilizing the -Server parameter on the Get-ADGroup command:
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
# Add the new normal users group to the folder with Read and Execute permissions
$GroupSID = Get-ADGroup -Identity $GroupName -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
# Add the management users group to the folder with Modify permissions
$GroupMGMTSID = Get-ADGroup -Identity $GroupNameMGMT -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupMGMTSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
Going this route seems to ensure that the Domain Controller I'm creating my groups on is the same one that I'm querying for the group's SID to use in the FileSystemAccessRule. It's been working fairly consistently.
Still having issues with the translation of the BUILTIN\Users group, though.

Multiple problems with Mail

Here is the setup:
iMac Intel running 10.4.8
Mail 2.1.1
seperate user accounts, each with their own email address
email is valornet.com (local ISP), set up to download to Mail
Multiple problems with one of the user accounts (not affecting the others):
1. Multiple copies in the inbox of the same message. These are brand new, not a week old as some other threads have mentioned. When I go to Preferences/Accounts/Advanced I have already clicked the "Remove Now" button, also the "Remove copy from server..." is checked.
2. Mail will not stop retrieving new mail. The circle thing next to the Inbox on the left just keeps spinning, and spinning, and spinning...
3. Cannot quit Mail. Have to go in Activity Monitor and Force Quit.
4. My trash folder is gone.
If anyone can help me clean up this mess, I would appreciate it.

Verify/repair the startup disk (not just
permissions), as described here:
Th
e Repair functions of Disk Utility: what's it all
about?
Minor bitmap problem needed fixing; fixed.
Go to Apple Menu > System Preferences >
Network, choose Network Port
Configurations from the Show popup menu,
and make sure that the configuration used to connect
to Internet appears at the top of the list.
It was showing Bluetooth first and ethernet 2nd; I moved ethernet to the top.
In Mail, open Window > Activity Viewer. What
do you see Mail doing there? Actually, you may be
able to avoid having to force quit Mail by canceling
whatever it’s doing (by clicking on the red stop icon
of the activity).
"Fetching new mail
Fetching 5 of 5: updates on buses - Haskell Middle School"
blue bar is moving, red stop icon is bright. I clicked on the stop icon and it "grayed out" but Mail did not stop the spinning circle next to the inbox. Still had to force quit.
What are your Mail > Preferences > Accounts >
Mailbox Behaviors > Trash settings?
Trash can is back! One problem solved...
Do you have any Mail plug-ins or any system utilities
that could interfere with Mail? In the Finder, go to
each of the following folders (if they exist). What
do you see there?
/Library/InputManagers/
~/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/Mail/Bundles/
None of the above folders exist.
In the user's ~/Library/Mail/ folder (the user with the problems), she has:
DefaultCounts
Envelope Index
LSMMap2
MessageRules.plist
MessageRules.plist.backup
OpenedAttachments.plist
SmartMailboxes.plist
and the following folders:
Mailboxes
[email protected]
Signatures
The Mailboxes folder has two more folders inside:
Deleted Messages.mbox
Outbox.mbox
The POP-... folder has the following folders inside:
Deleted Messages.mbox
Drafts.mbox
INBOX.mbox
Sent Messages.mbox
and one file:
MessageUidsAlreadyDownloaded2
Incidentally, I now have 9 copies of the same email in my inbox and 7 copies of another. They are multiplying like rabbits!
Thanks for your help so far.
17" iMac (intel) Mac OS X (10.4.8)

Multiple problems with PSE10 Organizer

I have Photoshop Elements 10 that I am using with Windows XP with Service Pack 3, a Pentium 4 CPU with 3 GHz, 2 GB of RAM and 48.6 GB of free disk space. I have had multiple problems with Organizer since I started using it.
When I first got PSE10, I imported 8 years of my photos into one catalog in Organizer. I'm not sure how many images were included in this catalog but from what I've read, there's no limit to the number of images that can be placed in a catalog.
Question: Is there any limit to the number of images that can be put into one catalog?
Catalog A
Problem 1) People recognition didn't work. When I tried to find people for tagging, the feature didn't work. After researching the problem online, I found that others who had the same problem solved it by rebuilding the catalog a few hundred images at a time. I deleted the original catalog with all of my images and created a new catalog with just 800 images from this year. Then, people recognition worked, and I was able to tag people. The only other feature that I have used in Catalog A is that I have edited a few images to improve exposure. I have not rated images, stacked them, renamed them or created albums. With this catalog, the Organizer and the Editor still work together so when I select a photo in Organizer to fix, the Editor opens up with the photo for editing like it is supposed to do.
Catalog B
I created another catalog that had about 900 different images from a European tour. I deleted some of those images so there are now 760 images in this catalog. At first, all the Organizer features seemed to work fine in this catalog. I was able to pull photos from Organizer to fix in the Editor. I rated all the images, stacked and renamed some photos and created several albums under an album category.
Problem 2) A couple of days ago, the Organizer and the Editor stopped working together. Now, when I select a photo in Organizer and click on Fix, Edit, the Editor window comes up but the photo does not appear in Editor. The only way I can get an image into Editor is to pull it directly into Editor. Then, when I want to save it as a Version Set I have to choose File> Organize Open File in order to save the image as a version set.
Question: How do I get the Organizer & Editor to work together again?
Problem 3) The Exif data has disappeared on quite a few of the images in Catalog B even though the Complete radio button is highlighted under the Properties panel. Some of those images were never edited or re-saved.
Question: How do I get the Exif data back into Properties.
Problem 4) Yellow question marks continue to appear on the top left of some images even though these images have not been moved. The Organizer searches for the "missing file" and finds it quickly but why is it "missing"? I have gone through the albums in this catalog, completed the missing file searches on all the images so that no yellow question marks appear and when I go back to the catalog the next time I find the yellow question marks are there again!
Question: Why does Organizer think the files are missing? Why isn't the file location remaining the same?
Problem 5) When I re-opened Catalog A with the general 2012 images, I got a message that my watched folder had new photos to import. When I clicked on ok, the next window brought up 3 photos that were already in Catalog B of my European tour that were taken in September. Somehow, the Date Created and the Dated modified had been changed from 9/12 to 11/12 so the Organizer thought they were new images when they were not.
Questions: Shouldn't the Date Created remain constant? The Date Created does not seem to represent the date the picture was taken, so what does that date represent? How can I keep the date created from being changed?
Both Catalogs
All of the images in both catalogs show creation dates that are later than the date modified, (example: date created of 6/12 and a date modified of 3/12).
Question: How is it possible that the date created is later than the date modified?

Hey Paysonite,
A lot of questions hmm!!! Let me try to answer few of them.
Question: Is there any limit to the number of images that can be put into one catalog?
Ans: No, you can import as many images in catalog you want. Just to add, as the size of catalog grows, Organizer's perfromance will be affected.
Question: Why does Organizer think the files are missing? Why isn't the file location remaining the same?
Ans: As you mentioned in your comments, you have deleted some files (i assume from explorer). But these deleted files are still present in Organizer. Since the deletion happened outside the organizer, so Organizer is unaware of the deletion. So when organizer tries to read the files (which were deleted), Organizer is unable to find then and thus thinks that files are missing.
Questions: Shouldn't the Date Created remain constant? The Date Created does not seem to represent the date the picture was taken, so what does that date represent? How can I keep the date created from being changed?
Ans: Date created represents the date on which the files was created on your files system (or into OS). It is not date when the images was shot (actual shot date is Date time Original in Organizer).
Question: How is it possible that the date created is later than the date modified?
Ans: A simple way to do it is-Suppose you have an image which was brought/copied on July (i am explaining this with the help of month only. Assume date to be 1st and year to 2012). Now change the system date to August. Edit this image in Editor (without creating a version set for easy illustration). Now date created is July and date modified is Aug.
Copy this fine on flash drive/pen drive. Delete the original file from windows. Change the system date to Sept. Now copy the file in windows and see its properties. It has Date created as Sept and date modified as Aug, which answers you question.
I am unable to fully understand your remaining questions. Please elaborate.
Also please let me know if you need more info with above answers.
~Andromeda

Multiple Problems with Toshiba Satellite A505-S6980 laptop??

Hi,
We purchased the Toshiba Satellite A505-S6980 laptop at Best Buy about a week ago. However, we seem to be having multiple problems with it, that I wouldn't have expected from a brand new Toshiba.
Problems:
Whenever I'm in Mozilla Firefox browser, it crashes 90% of the time. Firefox was always my favorite on our previous computer, and still is, I just can't use it because it continually crashes.
In Outlook, whenever I try to open a message or reply, or basically any general command, it pops up an error message that says, "Could not install the custom actions," and then does whatever I'd wanted it too. It's a pain, as we do a lot of email and calendar through Outlook.
In Outlook, when I tried to import our Contacts, it says that we do not have the appropriate permissions to access the files. We are the only user account on this computer. We don't do seperate ones for each family member; we just turn on the PC.
It seems to me like the internet crawls on this computer. Every time we try to play a video (e.g. ABC, CNN, Youtube), it won't buffer. It just stops and starts all throughout the video about every 3 seconds. HUGE nuisance. We watch a lot of videos.
Minor issue: In Firefox, before it has crashed that is, on my old computer I used to be able to type "cnet" without the quotes into the address bar, and it would take me to www.cnet.com. If it couldn't find the page, it would take me to my default search engine's page (Yahoo) with the search results. On this one, if I type anything into the address bar (like search terms/keywords) it bring up search results with a My Start Incredimail search engine. I want my Yahoo search engine, and I want it to find the page if it can.
I cannot seem to get the Aero Flick (I think) to work. That was one of the main things I was looking forward to, but I can't figure out how to do it.
It seems to me like the Windows Explorer freezes a lot.
There have been multiple times when I'm typing that the keys don't work. Like I would have to press the A key about 10 times to get it to show up on the screen once. It's hit and miss and doesn't do it all of the time.
This isn't a problem - just a question. Is it best to leave the computer plugged in all of the time if it's stationary? Or once it's fully charged, should I unplug it and let the power run down, and then re-charge it?
**CLARIFICATION: It's not Outlook Express, it's Microsoft Office Outlook 2007. The one that you have to pay for. Surely it works with 7, considering it's Microsoft?!?!
If you can help me answer any of these problems/questions, I would really appreciate it.
Have a safe and Merry Christmas!

Yes, everything was fine with Firefox. However, I have uninstalled it, and am just using Internet Explorer for now.
Thanks for battery info...
I'm well within the return window, but overall really like the laptop. I've put a lot of time into it, and just want it to work right if possible.
Thanks for the info.
ScottinFla wrote:Concerning Firefox, have you checked your add-on list for any faulty plug-ins or extensions? Try disabling them and see what happens. Also, that search engine you mentioned may have somehow been installed on your machine. Have you checked the "Manage search engines..." window available from the search bar? Check your add-ons as well. You could always reinstall Firefox from scratch.
As for the battery, it may not be best to continually run down the battery - followed by a long charge. Once a month or so should be fine. Otherwise, just try to give the battery some exercise every now and then.
Are you still within the return window? Your unit may have a bad install, some bad RAM, or...
I have the same model and it works just fine.

Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

I have a problem with iphone 4s...is ringing but another sounds not working....please help me!!!

i have a problem with iphone 4s...is ringing but another sounds not working....please help me!!!

Hi pystyke,
Welcome to Apple Support Communities.
You may find these links helpful with troubleshooting the audio issue you're experiencing:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Best,
Jeremy

Having a little problem with iPhone 3G.

Hi!
I have problem with Iphone 3G 16 GB. I was trying to reset all the settings in the iphone but something went to wrong side and now probably operating system is damaged and only icon for connection to the iTunes is showing up. ITunes is not recognizing the phone. Please can you help me!
Thanks in advance.

Hey gonche,
The iPhone is in Recovery Mode, generally the iPhone will have to be restored to get it out of recovery mode.
This article: http://docs.info.apple.com/article.html?artnum=305744 will walk you through restoring the iPhone.
-Jason

Have any of you had a bending problem with iPhone 6 plus?

has anyone had a bending problem with iPhone 6 Plus?

http://www.washingtonpost.com/blogs/the-switch/wp/2014/09/25/no-you-probably-can t-bend-the-iphone-6-plus-unless-youre-a-bodybuilder/?hpid=z17

I have a problem with Iphone 5 pocketdialing constantly

I have a problem with iphone 5 pocketdialing constantly

Tap the Sleep/Wake button BEFORE you put your phone in your pocket.

Hello, I have a problem with iPhone 5c softhware update ( The iPhone "iPhone" could not be restored. An unknown error occurred (27))

Hello, I have a problem with iPhone 5c softhware update ( The iPhone "iPhone" could not be restored. An unknown error occurred (27))

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The" may need service' meand there is a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Sir i have a problem with iphone its factory locked how to unlock

sir i have a problem with iphone its factory locked how to unlock

You have asked this question 3 times. Each time the answer being the same. ONLY, the original cellular provider can unlock the phone. However, if the phone has been previously hacked to provide unlocking, the fact that you have updated it has now re locked it. It is possible that it might never be ale to be properly unlocked.
https://discussions.apple.com/message/22282979#22282979

Multiple Problems with iPhone 4.

Similar Messages

Maybe you are looking for