Multiple problems with itouch (including apps, album artwork and play count

ok I just got a 32 gb itouch...
And so far it's been nice. But recently three problems are occuring:
1 normally, when you're in music and you put the iPod horizontally, you should see the album artwork. However, for me, most of the album artwork is simply black. Also, sometimes, when the album is selected during this process it is black while when it is in the list in the backround, you can see it. So there are general problems with that.
2 sometimes my apps don't work, while sometimes they do. It's not just one app, it happens to all my bought apps (not to the ones that were there when I goi the iPod, however)
3 everytime I connect to my computer, I loose all my play count. I have this situation so far: I played about 8 song from my iPod while it was connected to my pc. After that I put a top 25 smartlist. Later that day I listened to a nother album. In the evening I checked the smartlist, and on it were songs that I never played. Also I looked at my music under devices, and I put in order from most played to least, and on top were the song that I listened to while I had my iPod connect to the computer, and no the album I listened to later.
Please help me. I love listening to my iPods, and I just got this cool iPod, so please help me before I get a negative attitude towards the itouch.
Many thanks for you comprehention,
Michas

Well what your describing is a reboot of the iPod, not a real restore.
Here's the break down, just so you know.
1. Reboot, Hold down the power button and Home button, till the white apple appears, no data loss, just reboots the IPT.
2. In the IPTs general settings, at the bottom is a reset button, which allows you to reset some or all of the settings on the IPT.
3. A restore is done in iTunes and wipes the entire IPT of contents and restores the IPT to factory settings.

Similar Messages

Transfering Album Artwork and Play Counts

I'm about to buy a new computer but want to make sure that when I install iTunes that I can take the play counts and album art work from my old computer and transfer them to the new one. My music is on an external hard drive and isn't an issue.

OK, so your music files are on an EHD. Is folder where your music files are located on the EHD the designated "iTunes Music" folder?
The location of the "iTunes Music" folder is set in Edit>>Preferences>>advanced>>General.
You need to have all your music files in the designated iTunes Music folder if you want a trouble free transfer. If this is not the case, you need to sort it out before the transfer. Ask if you need help with this.
Next what is the location of your iTunes folder? By default it is in My Music on the c:drive, but some people with EHDs have it on the EHD.
Assuming you have the default loaction...
The iTunes folder contains the library database files and the album artwork folder, so it will need to be transferred. The best way to do this is to install iTunes on the new PC, then drag the iTunes folder that was created out to of Music the desk top and replace it with the one from the old PC.
You will probably have to adjust the permissions of the copied iTunes folder to give your account full control or Vista may not grant the new account write access.
Then with the EHD plugged in, start iTunes and set the location of the iTunes Music folder in preferences.
If you want to copy the music to the new computer after you have everything working on the new computer, you can set the loaction of the iTunes Music folder back to iTunes Music in the iTunes folder on the c: drive and then consolidate. This will copy the files across.
P.S. For info:
Here is the Apple help on migrating using an iPod:
http://support.apple.com/kb/HT1329?viewlocale=en_US
They are using the iPod as an EHD but the difference from your situation is that they assume a default set up with the iTunes Music folder in the iTunes folder on the c: drive.
Message was edited by: polydorus

Multiple problems with PSE10 Organizer

I have Photoshop Elements 10 that I am using with Windows XP with Service Pack 3, a Pentium 4 CPU with 3 GHz, 2 GB of RAM and 48.6 GB of free disk space. I have had multiple problems with Organizer since I started using it.
When I first got PSE10, I imported 8 years of my photos into one catalog in Organizer. I'm not sure how many images were included in this catalog but from what I've read, there's no limit to the number of images that can be placed in a catalog.
Question: Is there any limit to the number of images that can be put into one catalog?
Catalog A
Problem 1) People recognition didn't work. When I tried to find people for tagging, the feature didn't work. After researching the problem online, I found that others who had the same problem solved it by rebuilding the catalog a few hundred images at a time. I deleted the original catalog with all of my images and created a new catalog with just 800 images from this year. Then, people recognition worked, and I was able to tag people. The only other feature that I have used in Catalog A is that I have edited a few images to improve exposure. I have not rated images, stacked them, renamed them or created albums. With this catalog, the Organizer and the Editor still work together so when I select a photo in Organizer to fix, the Editor opens up with the photo for editing like it is supposed to do.
Catalog B
I created another catalog that had about 900 different images from a European tour. I deleted some of those images so there are now 760 images in this catalog. At first, all the Organizer features seemed to work fine in this catalog. I was able to pull photos from Organizer to fix in the Editor. I rated all the images, stacked and renamed some photos and created several albums under an album category.
Problem 2) A couple of days ago, the Organizer and the Editor stopped working together. Now, when I select a photo in Organizer and click on Fix, Edit, the Editor window comes up but the photo does not appear in Editor. The only way I can get an image into Editor is to pull it directly into Editor. Then, when I want to save it as a Version Set I have to choose File> Organize Open File in order to save the image as a version set.
Question: How do I get the Organizer & Editor to work together again?
Problem 3) The Exif data has disappeared on quite a few of the images in Catalog B even though the Complete radio button is highlighted under the Properties panel. Some of those images were never edited or re-saved.
Question: How do I get the Exif data back into Properties.
Problem 4) Yellow question marks continue to appear on the top left of some images even though these images have not been moved. The Organizer searches for the "missing file" and finds it quickly but why is it "missing"? I have gone through the albums in this catalog, completed the missing file searches on all the images so that no yellow question marks appear and when I go back to the catalog the next time I find the yellow question marks are there again!
Question: Why does Organizer think the files are missing? Why isn't the file location remaining the same?
Problem 5) When I re-opened Catalog A with the general 2012 images, I got a message that my watched folder had new photos to import. When I clicked on ok, the next window brought up 3 photos that were already in Catalog B of my European tour that were taken in September. Somehow, the Date Created and the Dated modified had been changed from 9/12 to 11/12 so the Organizer thought they were new images when they were not.
Questions: Shouldn't the Date Created remain constant? The Date Created does not seem to represent the date the picture was taken, so what does that date represent? How can I keep the date created from being changed?
Both Catalogs
All of the images in both catalogs show creation dates that are later than the date modified, (example: date created of 6/12 and a date modified of 3/12).
Question: How is it possible that the date created is later than the date modified?

Hey Paysonite,
A lot of questions hmm!!! Let me try to answer few of them.
Question: Is there any limit to the number of images that can be put into one catalog?
Ans: No, you can import as many images in catalog you want. Just to add, as the size of catalog grows, Organizer's perfromance will be affected.
Question: Why does Organizer think the files are missing? Why isn't the file location remaining the same?
Ans: As you mentioned in your comments, you have deleted some files (i assume from explorer). But these deleted files are still present in Organizer. Since the deletion happened outside the organizer, so Organizer is unaware of the deletion. So when organizer tries to read the files (which were deleted), Organizer is unable to find then and thus thinks that files are missing.
Questions: Shouldn't the Date Created remain constant? The Date Created does not seem to represent the date the picture was taken, so what does that date represent? How can I keep the date created from being changed?
Ans: Date created represents the date on which the files was created on your files system (or into OS). It is not date when the images was shot (actual shot date is Date time Original in Organizer).
Question: How is it possible that the date created is later than the date modified?
Ans: A simple way to do it is-Suppose you have an image which was brought/copied on July (i am explaining this with the help of month only. Assume date to be 1st and year to 2012). Now change the system date to August. Edit this image in Editor (without creating a version set for easy illustration). Now date created is July and date modified is Aug.
Copy this fine on flash drive/pen drive. Delete the original file from windows. Change the system date to Sept. Now copy the file in windows and see its properties. It has Date created as Sept and date modified as Aug, which answers you question.
I am unable to fully understand your remaining questions. Please elaborate.
Also please let me know if you need more info with above answers.
~Andromeda

My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!

My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!

i have the same problem but i have ios 5.01. how do you unsync? please help, thanks

HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

Contact iTunes Store Support.

Hello Apple? How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

Having multiple problems with script - NTFS Permissions and AD Groups

Hi, all! I'm having multiple problems with my first script I've written with Powershell. The script below does the following:
1. Prompts the user for a corporate division under which a shared folder will be created, and adjusts variables accordingly.
2. Prompts if the folder will be a global folder or an office/location-specific folder, and makes appropriate adjustments to variables.
3. If a global folder, prompts for the name. If an office/location-specific folder, prompts for each component of the street address, city and state and an optional modifier. I've prompted for this information in this way because the information
is used differently later on in the script.
4. Verifies the entered information and requests confirmation to proceed.
5. Creates the folder.
6. Creates an AD OU and/or security group(s).
7. Applies appropriate security groups to the new folder and removes undesired permissions.
Import-Module ActiveDirectory
$Division = ""
$DivAbbr = ""
$OU = ""
$OUDrive = "AD:\"
$FolderName = ""
$OUName = ""
$GroupName = ""
$OURoot = "ou=DFS Restructure Testing OU,ou=Pennsylvania Camp Hill 4410 Industrial Park Rd,ou=Locations,ou=Camp Hill,dc=jacobsonco,DC=com"
$FSRoot = "E:\"
$FolderPath = ""
$DefaultFolders = "Archive","Customer Service","Equipment","Inbounds","Management","Outbounds","Processes","Projects","Quality","Reports","Returns","Safety","Schedules","Time Keeping","Training"
[bool]$Location = 0
do {
$userInput = Read-Host "Enter CLS Division: (W)arehousing, (S)taffing, or (P)ackaging"
Switch ($userInput)
W {$Division = "Warehousing"; $DivAbbr = "WHSE"; $OU = "ou=Warehousing,"; break}
S {"Staffing is not yet implemented."; break}
P {"Packaging is not yet implemented."; break}
default {"Invalid choice. Please re-enter."; break}
while ($DivAbbr -eq "")
write-host ""
write-host ($Division + " was selected.")
$FolderPath = $Division + "\"
write-host ""
$choice = ""
do {
$choice = Read-Host "Will this be a (G)lobal folder or (L)ocation folder?"
Switch ($choice)
G {$Location = $false; break}
L {$Location = $true; $FolderPath = $FolderPath + "Locations\"; $OU = "ou=Locations," + $OU; break}
default {"Invalid choice. Please re-enter."; $choice = ""; break}
while ($choice -eq "")
write-host ""
write-host ("Location is set to: " + $Location)
write-host ""
if ($Location -eq $false) {
$FolderName = Read-Host "Please enter folder name:"
$GroupName = $DivAbbr + " " + $FolderName
} else {
$input = Read-Host "Please enter two-letter state abbreviation:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter city:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter street address number only:"
$FolderName = $FolderName + $input
$GroupName = $DivAbbr + " " + $FolderName
$FolderName = $FolderName + " "
$input = Read-Host "Please enter street name:"
$FolderName = $FolderName + $input
$input = Read-Host "Please enter any optional information to appear in folder name:"
if ($input -ne "") {
$FolderName = $FolderName + " " + $input
$OUName = $FolderName
write-host
write-host "Path for folder: "$FSRoot$FolderPath$FolderName
write-host "AD Path: "$OUDrive$OU$OURoot
write-host "New OU Name: "$OUName
write-host -NoNewLine "New Security Group names: "$GroupName
if ($Location -eq $true) { write-host " and "$GroupName" MGMT" }
write-host
$input = Read-Host "Please confirm creation of new site/folder: (Y/N) "
if ($input -ne "Y") { Exit }
write-host
write-host -NoNewLine "Folder exists: "; Test-Path ($FSRoot + $FolderPath + $FolderName)
if (Test-Path ($FSRoot + $FolderPath + $FolderName)) {
Write-Host "Folder already exists! Skipping folder creation..."
} else {
write-host "Folder does not exist. Creating..."
new-item -path ($FSRoot + $FolderPath) -name $FolderName -itemtype directory
Set-Location ($FSRoot + $FolderPath + $FolderName)
if ($Location -eq $true) {
$tempOUName = "ou=" + $OUName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "OU exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "OU already exists! Skipping OU creation..."
} else {
write-host "OU does not exist. Creating..."
New-ADOrganizationalUnit -Name $OUName -Path ($OU + $OURoot) -ProtectedFromAccidentalDeletion $false
$GroupNameMGMT = $GroupName + " MGMT"
if (!(Test-Path ($OUDrive + "CN=" + $GroupName + "," + $tempOUName + $OU + $OURoot))) { write-host "Normal user group does not exist. Creating..."; New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
if (!(Test-Path ($OUDrive + "CN=" + $GroupNameMGMT + "," + $tempOUName + $OU + $OURoot))) { write-host "Management user group does not exist. Creating..."; New-ADGroup -Name $GroupNameMGMT -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
# $FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
write-host $BIUsersSID.Value
# out-string -inputObject $BIUsers
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$objUser = New-Object System.Security.Principal.NTAccount($ADGroupName)
$objUser.Translate([System.Security.Principal.SecurityIdentifier]).Value
write-host $ADGroupName
write-host $objUser.Value
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
$ADGroupName = "JACOBSON\" + $GroupNameMGMT
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
} else {
$tempOUName = "cn=" + $GroupName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "Group exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "Security group already exists! Skipping new security group creation..."
} else {
write-host "Security group does not exist. Creating..."
New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ($OU + $OURoot)
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$FolderACL.SetAccessRuleProtection($True,$True)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"Modify","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
My problems right now are in the assignment/removal of security groups on the newly-created folder, and the problems are two-fold. Yes, I am running this script as an Administrator.
First, I am unable to remove the BUILTIN\Users group from the folder when this is an office/location-specific folder. I've tried to remove the group in several different ways, and none are having any effect. Oddly, if I type in the lines directly
into Powershell, they work as expected. I've tried the following methods:
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
In the first case, the script goes through and has no apparent effect because afterwards, I do a get-acl and the BUILTIN\Users group is still there, although when looking through the GUI, inheritance appears to have been broken from the parent folder.
In the second case, I get the following error message:
Exception calling "RemoveAccessRuleAll" with "1" argument(s): "Some or all identity references could not be translated."
At C:\Users\tesdallb\Documents\FileServerBuild.ps1:110 char:5
+ $FolderACL.RemoveAccessRuleAll($Ar)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : IdentityNotMappedException
This seems strange that the local server is unable to translate the SID of a BUILTIN account. I've also tried explicitly putting in the BUILTIN\Users SID in place of the variable in the New-Object line, but that gives me the same error. I've
also tried the solutions given in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ad59dc58-1360-4652-ae09-2cd4273cbd4f/remove-acl-issue?forum=winserverpowershell and at this URL:
http://technet.microsoft.com/en-us/library/ff730951.aspx but these solutions also failed to have any effect.
My second problem is when I try to apply the newly-created security groups, I also will get the "Some or all identity references could not be translated." I thought I had found a workaround to the problem by adding the -PassThru option to
the New-ADGroup commands, because it would output the SID of the group after creation, however a few lines later, the server is unable to translate the account to apply the security groups to the folder.
My first Powershell script has been working well up to this point and now I seem to have hit a showstopper. Any help is appreciated.
Thanks!

I was hoping to stay with strictly Powershell, but unless I can find a Powershell solution, I may resort to ICACLS.
As for the problems with my groups not being translatable right after creating them, I think I have solved this problem by using the -Server parameter on all my New-ADGroup commands and this example code seems to have gotten around the translation problem,
again utilizing the -Server parameter on the Get-ADGroup command:
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
# Add the new normal users group to the folder with Read and Execute permissions
$GroupSID = Get-ADGroup -Identity $GroupName -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
# Add the management users group to the folder with Modify permissions
$GroupMGMTSID = Get-ADGroup -Identity $GroupNameMGMT -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupMGMTSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
Going this route seems to ensure that the Domain Controller I'm creating my groups on is the same one that I'm querying for the group's SID to use in the FileSystemAccessRule. It's been working fairly consistently.
Still having issues with the translation of the BUILTIN\Users group, though.

Multiple problems with Mail

Here is the setup:
iMac Intel running 10.4.8
Mail 2.1.1
seperate user accounts, each with their own email address
email is valornet.com (local ISP), set up to download to Mail
Multiple problems with one of the user accounts (not affecting the others):
1. Multiple copies in the inbox of the same message. These are brand new, not a week old as some other threads have mentioned. When I go to Preferences/Accounts/Advanced I have already clicked the "Remove Now" button, also the "Remove copy from server..." is checked.
2. Mail will not stop retrieving new mail. The circle thing next to the Inbox on the left just keeps spinning, and spinning, and spinning...
3. Cannot quit Mail. Have to go in Activity Monitor and Force Quit.
4. My trash folder is gone.
If anyone can help me clean up this mess, I would appreciate it.

Verify/repair the startup disk (not just
permissions), as described here:
Th
e Repair functions of Disk Utility: what's it all
about?
Minor bitmap problem needed fixing; fixed.
Go to Apple Menu > System Preferences >
Network, choose Network Port
Configurations from the Show popup menu,
and make sure that the configuration used to connect
to Internet appears at the top of the list.
It was showing Bluetooth first and ethernet 2nd; I moved ethernet to the top.
In Mail, open Window > Activity Viewer. What
do you see Mail doing there? Actually, you may be
able to avoid having to force quit Mail by canceling
whatever it’s doing (by clicking on the red stop icon
of the activity).
"Fetching new mail
Fetching 5 of 5: updates on buses - Haskell Middle School"
blue bar is moving, red stop icon is bright. I clicked on the stop icon and it "grayed out" but Mail did not stop the spinning circle next to the inbox. Still had to force quit.
What are your Mail > Preferences > Accounts >
Mailbox Behaviors > Trash settings?
Trash can is back! One problem solved...
Do you have any Mail plug-ins or any system utilities
that could interfere with Mail? In the Finder, go to
each of the following folders (if they exist). What
do you see there?
/Library/InputManagers/
~/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/Mail/Bundles/
None of the above folders exist.
In the user's ~/Library/Mail/ folder (the user with the problems), she has:
DefaultCounts
Envelope Index
LSMMap2
MessageRules.plist
MessageRules.plist.backup
OpenedAttachments.plist
SmartMailboxes.plist
and the following folders:
Mailboxes
[email protected]
Signatures
The Mailboxes folder has two more folders inside:
Deleted Messages.mbox
Outbox.mbox
The POP-... folder has the following folders inside:
Deleted Messages.mbox
Drafts.mbox
INBOX.mbox
Sent Messages.mbox
and one file:
MessageUidsAlreadyDownloaded2
Incidentally, I now have 9 copies of the same email in my inbox and 7 copies of another. They are multiplying like rabbits!
Thanks for your help so far.
17" iMac (intel) Mac OS X (10.4.8)

Multiple Problems with Toshiba Satellite A505-S6980 laptop??

Hi,
We purchased the Toshiba Satellite A505-S6980 laptop at Best Buy about a week ago. However, we seem to be having multiple problems with it, that I wouldn't have expected from a brand new Toshiba.
Problems:
Whenever I'm in Mozilla Firefox browser, it crashes 90% of the time. Firefox was always my favorite on our previous computer, and still is, I just can't use it because it continually crashes.
In Outlook, whenever I try to open a message or reply, or basically any general command, it pops up an error message that says, "Could not install the custom actions," and then does whatever I'd wanted it too. It's a pain, as we do a lot of email and calendar through Outlook.
In Outlook, when I tried to import our Contacts, it says that we do not have the appropriate permissions to access the files. We are the only user account on this computer. We don't do seperate ones for each family member; we just turn on the PC.
It seems to me like the internet crawls on this computer. Every time we try to play a video (e.g. ABC, CNN, Youtube), it won't buffer. It just stops and starts all throughout the video about every 3 seconds. HUGE nuisance. We watch a lot of videos.
Minor issue: In Firefox, before it has crashed that is, on my old computer I used to be able to type "cnet" without the quotes into the address bar, and it would take me to www.cnet.com. If it couldn't find the page, it would take me to my default search engine's page (Yahoo) with the search results. On this one, if I type anything into the address bar (like search terms/keywords) it bring up search results with a My Start Incredimail search engine. I want my Yahoo search engine, and I want it to find the page if it can.
I cannot seem to get the Aero Flick (I think) to work. That was one of the main things I was looking forward to, but I can't figure out how to do it.
It seems to me like the Windows Explorer freezes a lot.
There have been multiple times when I'm typing that the keys don't work. Like I would have to press the A key about 10 times to get it to show up on the screen once. It's hit and miss and doesn't do it all of the time.
This isn't a problem - just a question. Is it best to leave the computer plugged in all of the time if it's stationary? Or once it's fully charged, should I unplug it and let the power run down, and then re-charge it?
**CLARIFICATION: It's not Outlook Express, it's Microsoft Office Outlook 2007. The one that you have to pay for. Surely it works with 7, considering it's Microsoft?!?!
If you can help me answer any of these problems/questions, I would really appreciate it.
Have a safe and Merry Christmas!

Yes, everything was fine with Firefox. However, I have uninstalled it, and am just using Internet Explorer for now.
Thanks for battery info...
I'm well within the return window, but overall really like the laptop. I've put a lot of time into it, and just want it to work right if possible.
Thanks for the info.
ScottinFla wrote:Concerning Firefox, have you checked your add-on list for any faulty plug-ins or extensions? Try disabling them and see what happens. Also, that search engine you mentioned may have somehow been installed on your machine. Have you checked the "Manage search engines..." window available from the search bar? Check your add-ons as well. You could always reinstall Firefox from scratch.
As for the battery, it may not be best to continually run down the battery - followed by a long charge. Once a month or so should be fine. Otherwise, just try to give the battery some exercise every now and then.
Are you still within the return window? Your unit may have a bad install, some bad RAM, or...
I have the same model and it works just fine.

Strange problem with the mail app on an iPad

I've got a bit of a strange problem with the mail app on an iPad - it's sending and receiving mail ok but won't let you delete mail. If you keep at it, it appears as if you have deleted mail (though takes a very long time as you just have to keep deleting it over and over again) - but the size of the app still keeps going up - reached 600mb so far, even though there is hardly any mail or attachments (goes up quite a lot each time you try to delete anything) - any idea what's causing this and how I can fix it?
It occasionally comes up with a dialogue panel saying to check my account settings, but I have checked those and they are fine. The little 'loading' icon just keeps spinning constantly too.

go to Settings > Mail > your account > Advanced > Move Discarded Messages Into
and make sure that Deleted Mailbox is ticked, and not Archive Mailbox
You can also adjust how long the deleted mail stays in the trash immediately below that.
If you are talking about a gmail account, you may also have to login to your account on the gmail server and update the settings there. This is what Barney previously posted about that:

TS3960 same problem with mavericks server app....tried additional ino solution did not work..any suggestions?

TS3960: Server App or Server Admin can't connect to a newly upgraded Lion server
same problem with mavericks server app....tried additional info solution did not work..any suggestions?
All log in info is correct. will not accept worked fine on 10.8 just upgraded to 10.9 and will not work. deleted and reinstalled server app 3.0.1

Figured it out....went to server...settings...check allow remote administration using Server

Is anyone having problems with the Health App and Withings?

After upgrading to ios 8.1 I am still having a problem getting my Withings Health Mate data to correctly update my Healt Dashboard. The information that does show up on the different Dashboard widgets is way off. For example, I today walked 2400 steps according to Withings, but the Health Dashboard shows 10,700 steps (720,000 in smaller print on another line). It further shows my daily average at 313,000 steps! Ridiculous.
Walking/Running distance for the days shows 22.5 miles with a daily average of 108 miles.....I'm not Barry Allen/The Flash.

My problems with the Healt App are all over the map. The information on Withings Health Mate is totally accurate, and updates immediately. I have their scale (since 2011) and wireless blood pressure monitor. Also, I find the heart rate senson on the iPhone 6 to work well, every time.
This issue for me is with Apple's Health app. I get ridiculous readings on the Dashboards. For example, it shows my daily average in steps as 170,688, and miles walked at 80. Hardly! Additionally, the Dashbord widgets will disappear/reappear for no reason. I have tried switching the priority of data sources for the steps dashboard between Withings and my iPhone 6 (because it is indicated that the top source governs the dashboard info), to no avail.
Lastly, I don't know how to interpret the infomration on the individual dashboards. On the same line as the word "Steps" there is a number, i.e. 14,272 steps, and just under it the word "Today." However, when I switch from "Day," "Week,," "Month," and "Year," those number don't change. Below the word Today is a number (which changes all the time), and at the bottom of the widget, just above the month (October now) is the number 1,149,749. Nice.
I would like to get the Apple Watch next year, but if the Health App cannot be fixed I may not.

Here's My Problem With the Podcasts App

So, here's my problem with the Podcasts app on my iPhone 5 - it relies too heavily on streaming and not enough on downloading and syncing. For most of my 8 hrs at work each day I am out of contact with my wireless carrier. And the hospitals IT dept has chosen to block whatever port the Podcasts app uses to stream content. So nothing over Wi-Fi either.
As a result, all podcasts must being fully downloaded and ready to listen to prior to leaving for work. Unfortunately, even after fiddling with various settings in the app, I can't seem to get content to stick in the app. There are plenty of Unplayed episodes, but when I'm ready to listen, they're not really there and must be re-downloaded or streamed.
Here's what I am going to try:
• iTunes will continue do all of the downloading and syncing of podcasts to my iPhone
• In each Podcast on the iPhone I have Subscribe "ON" and Auto-Download "OFF"
I'm going to try this setup for a few days and see if it resolves my issue. Would appreciate any other observations and suggestions you might have. Cheers!

Simple really:
Delete the Podcasts app from your iPhone.
Restart your iPhone.
Continue managing your podcasts from iTunes, like you did under iOS 5.
After restarting your phone, Podcasts will play via the Music app on your phone again.

I've a problem with my mail app

I have a problem with my mail app, after upgrading mavericks.
My mail app was worked well, before I upgrade.
Now, my mail app is working only with icloud account.
I can use my gmail account with safari or other web browsers, but not in the mail app.
That was happening both of my macbook pro, and macbook air, but not on my iPad and iPhone.
I tried deleting account and re added it, but that doesn't solve the problem.
what should i do..??

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Multiple problems with itouch (including apps, album artwork and play count

Similar Messages

Maybe you are looking for