Multiple products in the same domain

Hello,
I installed the following 12.1.3 products on my Linux configuration :
- Oracle Fusion Middleware Infrastructure
- Oracle Enterprise Repository
- Oracle HTTP Server (managed by WLS)
- SOA Suite Quick Start for Developers
- BPM Quick Start for Developers
Then I installed required patches and I created database schemas with RCU.
My question is what's the configuration process if I want to configure all these products in the same domain?
Do I have to run config.sh script for each product or running config.sh one time for all products is the solution?
Thanks
Daniel

Hi,
In India site, you can create a SMTP connector which point to the local ISP.
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

How to create send connectors for multiple sites in the same domain?

Current Scenario:
We have 2 offices, 1 in London and 1 in India. Both are in the same domain and are connected via VPN. Both have their own separate Exchange 2003 server. Each location sends out their mail via the Default SMTP Virtual Server on their exchange server through
their local ISP. There are no Send connectors created currently.
We have now installed an additional Exchange 2010 server with Hub, CAS and Mailbox roles at the London site. Internal mail flow between the sites seems to be working fine.
I believe the Exchange 2010 needs a Send connector to send out mail to the internet. However as soon as we create a Send connector on Exchange 2010, mail from the older 2003 servers at both sites start to flow out from the exchange 2010 server. This is not
optimal for our India site since their outgoing mail now has to flow via the VPN to London and out via the new server.
How can we configure it so that each server sends outgoing mail independently?
Thanks

Hi,
In India site, you can create a SMTP connector which point to the local ISP.
Thanks.
Niko Cheng
TechNet Community Support

New tab page shows multiple sites from the same domain

For example in the grid of sites it may show multiple pages from e.g. stackoverflow.com instead of just the single base domain stackoverflow.com (or alternatively the most used of the pages). Is there any way to limit each domain to a single page in the quick links tableau? In my opinion having multiple pages is not at all a navigational aid as sites generally provide their own internal navigation.

This allows you to group the tabs as well [https://addons.mozilla.org/en-us/firefox/addon/new-tab-plus/ New Tab Plus] however it is preliminary.

How to make multiple portals work in same domain (wlp 9.2)? IMPORTANT !!!

We have domain where one portal application is in production now and other portal application have to deploy in the same domain.
The first one is using global scoped DataSources and the new one is using application scoped because they have to use own schemas in the database.
Also Group and User/role management have to work application scoped, meaning that in one's portal admin console shows only users/groups/roles to that portal.
How do I do this and what is the optional/best practises to do this kind of configuration, configure and deploy multiple portals in the same domain ?
I get so far that I make new SQLAuthenticator and XCAMLRoleMapper to the new portal but when the LDAP and database goes out of sync and I delete P13N -tables and LDAP, server start creates only to the first portal database the needed rows and delegated admin management doesn't work in the new one at all.
I have read all bea's documents related to JDBC - application scoping, deploying, security P13N and I can't get enough information from it to make this work.
Thanks !

You may want to ask in the weblogic.developer.interest.portal forum.
I don't believe that group and user/role management can be application
scoped.
<Tanja Puurula> wrote in message news:[email protected]..
We have domain where one portal application is in production now and other
portal application have to deploy in the same domain.
The first one is using global scoped DataSources and the new one is using
application scoped because they have to use own schemas in the database.
Also Group and User/role management have to work application scoped, meaning
that in one's portal admin console shows only users/groups/roles to that
portal.
How do I do this and what is the optional/best practises to do this kind of
configuration, configure and deploy multiple portals in the same domain ?
I get so far that I make new SQLAuthenticator and XCAMLRoleMapper to the new
portal but when the LDAP and database goes out of sync and I delete
P13N -tables and LDAP, server start creates only to the first portal
database the needed rows and delegated admin management doesn't work in the
new one at all.
I have read all bea's documents related to JDBC - application scoping,
deploying, security P13N and I can't get enough information from it to make
this work.
Thanks !

Is it possible to have multiple SOA Server within same domain ?

Hi All
I need to know whether I can install and setup multiple soa_servers inside the same domain so that they can be managed by single weblogic instance.
The use case scenario :
We have a single DEV environment instance that has several environments configured with it like PR1, PR2, TR, PY, PC.
The way we have achieved it is by creating partitions under soa_infra and deploying the code as we move up the ladder in testing phases before we move to separate QA and Prod.
Because of the way Dev is being setup, we are not able to use/test Oracle B2B properly because there is no way to have environment specific distinction be created in Oracle B2B.
In essence, at any point in time testing can happen only in one environment for out Dev box because it makes call to Oracle B2B (Trading Partners) and there is no way for us to distinguish whether the call is coming from PR1 or PR2 or PC or TR or PY.
We have no issue testing it as long as it is not restricted to B2B but with B2B we are restricted because a single soa instance has a single B2b instance. ( We can not have partition wise instances of B2B)
Requirement :
Is it possible to install and configure different soa_server for.e.g
soa_server1 : PR1
soa_server2 : PR2
soa_server3 : PY
soa_server4 : PC
soa_server5 : TR
inside the same domain (dev_domain) so that they can be managed from single weblogic instance through Admin console and we can have different B2B instances for each soa_server.
This way we will be able to differentiate between environments on the basis of ports with the same IP address.
Please let me know if there is a possibility of achieving the same.
Thank you so much in advance.
Regards
ACM

Thanks Sharmela for your directions.
Let me try to clone the soa server and see if it helps.
Before I move forward, I would like to verify one thing from you.
As you have mentioned the word "cluster" , I am not exactly trying to achieve the clustered setup "conventional way of load balancing and high availability" but instead I want to have these cloned soa servers( soa_server1 : 8001,soa_server2 : 8002,soa_server3 : 8003,soa_server4 : 8004,soa_server5:8005 )to have separate partitions ( PR1, PR2, PY, TR,PC) respectively.
I hope I don't have to configure OHS to access these nodes since I want these nodes be available as a separate instance rather than redirecting load in case of any other becoming unresponsive ( OHS configuration)
I am not sure whether I am making sense but all I need to do is point the PR1 instance having it's own port number(8001) to the PR1 instance of ERP.
I think it is doable but just wanted to double check with you.
Please let me know
Thank you

Multiple ios products with the same name.

Hello guys,
We have multiple iOS universal products with the same name for different countries. Will it cause any issues when the user installs them in the same device? Using Xcode to push them to my device, i noticed that they are all installed in the same place, i.e only one app is available. So my question is how should we do to use the same name for multiple apps and is it possible?

Go ahead and doubt if it makes you feel superior.
For others:
If your pom has this:
<dependency>
               <groupId>javax.faces</groupId>
               <artifactId>jsf-api</artifactId>
               <version>${jsf.version}</version>
          </dependency>
          <dependency>
               <groupId>javax.faces</groupId>
               <artifactId>jsf-impl</artifactId>
               <version>${jsf.version}</version>
          </dependency>
where jsf.version = 1.2, change jsf.version to 1.2_10

How can I have use the same div ID multiple times on the same page?

Okay so a problem I encounter a lot is that often times I want to use the same div ID several times on the same page. An example of this is when I'm creating table like designs.
Let's say for instance I create a div ID called 'product-container'. I want to use 'product-container' multiple times on the same page but if I do this it is improper XHTML and will throw errors in any XHTML validator (you are only allowed to use a div ID once on any XHTML page in order for it to be standards compliant).
Now the first option is that I could define 'product-container' in my CSS style sheet multiple times by doing something like this...
#product-container {
     width: 300px;
#product-container-2 {
     width: 300px;
#product-container-3 {
     width: 300px;
#product-container-4 {
     width: 300px;
What you will see there however is that it seems pointless to define the same ID numerous times over (just adding a number on the end) when each ID is the exact same thing and has the exact same attributes.
Now what I have noticed is that there are some sites out there who manage to have the same ID appear several times in the code but add a number to it just like above. The difference is that they only have one definition for 'product-cointainer' in their CSS document but in their actual XHTML code they have IDs for 'product-container' but with numbers on the end like 2,3,4,5, etc. It's almost as if JavaScript or some other code is automatically appending a number on the end of the ID so the validator won't consider the markup to be invalid, but yet it knows that it's using the same 'product-container' style that is contained in the CSS style sheet.
I hope I explained this correctly. I'm just hoping to find a way that I can put the same div ID on a page multiple times without having to define it over and over again in my CSS.
Any help is much appreciated!

Because it seems like by using a class you can't make this position as
well as you can by using an ID. Am I wrong?
An ID name can be used only one time per page. A class name can be used multiple times per page.
.product {
width: 300px;
text-align:left;
color: #FF0000
border: 2px solid #666;
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

There are multiple users with the same display name

Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regards

Hi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

How can I install one app on multiple iPads at the same time?

We have a volume purchasing account, but when purchasing an app we get multiple serial numbers that all seem to need to be entered individually. The iPhone config Utility will not sync multiple iPads at the same time. Am I missing something? This cannot be the method for mass deployment, it seem too complicated.

You can do a backup of you iPad then restore the backup to many devices.
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
Mobile Device Management Solutions for iOS
http://www.apple.com/iphone/business/integration/mdm/
http://www.apple.com/ipad/business/resources/
"iOS mobile device management (MDM)
With an unmatched breadth of features, a Self Service console forover-the-air (OTA) distribution of in-house and app store apps, and integration with Apple's Volume Purchase Plan (VPP), the Casper Suiteallows administrators to easily achieve the four major tenets of iOSmobile device management: Inventory, Configuration, Security Management, and App Distribution."
http://jamfsoftware.com/products/casper-suite/

How to send email to a SMTP server over a secure channel using STARTTLS setting of a send connector (Exchange and SMTP server are in the same domain)

I’m trying to send email using exchange send connector STARTTLS setting to the SMTP server. I have read multiple documents on configuring TLS for send connector, but they talks about outbound connections to internet facing servers. My Exchange 2013 and SMTP
server is in the same domain (let’s say A.com) and I’m creating dummy domains on my SMTP server (e.g.
[email protected],
[email protected] ) and their respective send connectors on the exchange server end. In the smart host section added the IP address of the SMTP server and in the scoping section added the SMTP domain address (e.g. dummy1.local ). In the FQDN field, added
the FQDN of the exchange server 2013 which certificate is enabled with SMTP service.
Could you tell me a step by step procedure, where I’m going wrong or any extra settings needs to added?
Presently, it is giving me an error that 530 5.5.1 TLS encrypted connection is required.
Note: I’ve created the Microsoft CA certificates for the SMTP and exchange servers and imported them in the personal certificate container. In which, the exchange certificate is created with FQDN name of the server and enabled for the SMTP service.
I’m using OPENSSL certificate for making the SMTP server TLS enabled. (let me know, if I need to import the OPENSSL certificate anywhere on the exchange end)?
Thanks!

-IgnoreSTARTTLS is set to false on the send connector properties.
I'm trying to established a HTTP over TLS connection. I'm not using mutual TLS between these two server.
The send connector protocol logging is attached as below,
2014-09-22T20:09:45.468Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,2,10.219.3.74:24939,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:45.546Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,3,10.219.3.74:24939,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,4,10.219.3.74:24939,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,5,10.219.3.74:24939,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,6,10.219.3.74:24939,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,7,10.219.3.74:24939,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,8,10.219.3.74:24939,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,9,10.219.3.74:24939,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,10,10.219.3.74:24939,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,11,10.219.3.74:24939,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,12,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,13,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,14,10.219.3.74:24939,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,15,10.219.3.74:24939,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,16,10.219.3.74:24939,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:45.640Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,17,10.219.3.74:24939,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:45.655Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,18,10.219.3.74:24939,10.219.3.73:25,>,STARTTLS,
2014-09-22T20:09:45.671Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,19,10.219.3.74:24939,10.219.3.73:25,<,220 2.7.0 Ready to start TLS,
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,20,10.219.3.74:24939,10.219.3.73:25,*,,Sending certificate
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,21,10.219.3.74:24939,10.219.3.73:25,*,CN=Exchange.A.local,Certificate subject
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,22,10.219.3.74:24939,10.219.3.73:25,*,"CN=DC-CA, DC=A, DC=local",Certificate issuer name
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,23,10.219.3.74:24939,10.219.3.73:25,*,63E7E70100000000000B,Certificate serial number
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,24,10.219.3.74:24939,10.219.3.73:25,*,CAEB1200CDF49715E5F2E4B8315EFDDC01F8F945,Certificate thumbprint
2014-09-22T20:09:45.780Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,25,10.219.3.74:24939,10.219.3.73:25,*,Exchange.A.local,Certificate alternate names
2014-09-22T20:09:46.654Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,26,10.219.3.74:24939,10.219.3.73:25,-,,Local
2014-09-22T20:09:46.669Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,0,,10.219.3.73:25,*,,attempting to connect
2014-09-22T20:09:46.685Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,1,10.219.3.74:24940,10.219.3.73:25,+,,
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,2,10.219.3.74:24940,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,3,10.219.3.74:24940,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,4,10.219.3.74:24940,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,5,10.219.3.74:24940,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,6,10.219.3.74:24940,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,7,10.219.3.74:24940,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,8,10.219.3.74:24940,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,9,10.219.3.74:24940,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,10,10.219.3.74:24940,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,11,10.219.3.74:24940,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,12,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,13,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,14,10.219.3.74:24940,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,15,10.219.3.74:24940,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,16,10.219.3.74:24940,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,17,10.219.3.74:24940,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,18,10.219.3.74:24940,10.219.3.73:25,*,,sending message with RecordId 52652004081667 and InternetMessageId <[email protected]>
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,19,10.219.3.74:24940,10.219.3.73:25,>,MAIL FROM:<> SIZE=7653 BODY=BINARYMIME,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,20,10.219.3.74:24940,10.219.3.73:25,>,RCPT TO:<[email protected]>,
2014-09-22T20:09:46.825Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,21,10.219.3.74:24940,10.219.3.73:25,<,530 5.5.1 A TLS-encrypted connection is required,
2014-09-22T20:09:46.950Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,22,10.219.3.74:24940,10.219.3.73:25,<,503 5.5.1 unexpected RCPT command,
2014-09-22T20:09:46.981Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,23,10.219.3.74:24940,10.219.3.73:25,>,RSET,

Can I use multiple SSIDs on the same intranet in close proximity?

Can Multiple APs running the same or different channels be used with different SSIDs to create seperate wireless networks on the same intranet?
Example: 4 APs running on the same floor of a small building, 2 APs using SSID named ABC using channels 1 &6. The other 2 APs using SSID named XYZ using channels 1 & 6 or even 6 & 11.
Will this scenario work to create two seperate wireless networks on the same intranet or will this cause problems with all wireless traffic?

For you to understand, the channel is a subdivision of the "physical" medium. The SSID is a logical subdivision that is stacked on the physical medium/frequency/channel.
You can run several "logical" networks (based on different SSID) on one single (physical) channel/frequency. Clients of each "logical" network won't see and won't be able to talk (radio level) with the clients of the other "logical network" /SSID. However, if they operate on the same channel/frequency, they will interfere and your throughput will be affected since they nevertheless share the same (physical) frequency.
It's very similar to the difference between IP addresses and MAC addresses. You may have 2 stations in the same "collision domain" (MAC level; Physical network; subject to collision with each other packets) while they can't speak together without a router because on an IP standpoint they are not in the same subnet (logical network).
So, your solution will work, both networks will be independent at a logical level, but when both 'logical networks" share the same frequency ("collision domain(!)") the throughput will be affected subsequently (all stations of both "logical networks" are operating on the same frequency/channel).
Guy

Multiple Scopes for the same subnet with Cisco CNR

I have a requeriment from my internal client that he wants to have multiple scopes within the same /21 subnet , but he wants to have different scopes for each group of servers ( in the /21 subnet).
We have 2 Cisco CNR ( I dont know the version they are running because they are managed by an external vendor) but they are in active / standby mode.
My question is .. it is posible to make the CNR have different scopes (ranges of IP's) for the same subnet ( /21) and assign those based on the client ( I dont know what criteria can be followed .. maybe Mac Address ???).
I appreciate any help or pointing to the right documentation
Thank you in advanced

I don't know that you would want a separate PO print. You can print the same PO print twice to provide a copy for the freight vendor. I think it should be okay as long as it is clear that the PO is with the vendor for the products but there is a condition specifying the freight deal. The second vendor (say the freight vendor) should be okay with this PO as well. I don't remember how the standard SAP PO forms handled the vendor condition but it should be enough I would think. I never came across a separate PO for freight since it is usually an value added service that is an integrated part of shipping goods and the paper-work usually is leveraged from PO, bill-of-lading, etc. SAP will make it difficult if you do need a separate PO since there is no way to use account assignment to material and therefore would need to manually account code and invoice verification, post to a clearing account in FI for re-class to material or charge to internal order with settlement to material or something like this.
I would just make sure that the PO print makes sense in terms of being able to see the freight charge and maybe the vendor name or something (look at the standard SAP PO form to see what the best practice is).

Multiple Facts at the same report

Hello gurus,
How can I use multiple facts at the same report using OBIEE 10g?
I followed the instructions of this website but it's not working...
http://obibb.wordpress.com/2010/05/31/multiple-fact-reporting-on-non-conforming-dimensions/
Physical Model:
ASSET (DIMENSION) ------------ ASSET (FACT) ----------------- PERSON (DIMENSION) ----------------- CAMPAIGN (FACT) ---------------- CAMPAIGN (DIMENSION)
Business Model:
ASSET (DIM) ---------------- FACT ------------------- CAMPAIGN (DIM)
                           (ASSET - CAMPAIGN)
                                        |
                                        |
                                        |
                                        |
                              PERSON (DIM)
Asset and Campaign: Non conformed Dimensions;
Person: Conformed Dimension;
Note that I want to use at my report some asset and campaign informations to answer questions like:
Wich assets were created after the campaign launch? or List of asset by person and campaigns.
Is it possible to do? I'm trying to change all kinds of column levels (Total/Detail) and it keeps sending an error like:
"Internal error: No matching table for expr Fact_W_CAMP_HIST_F_Teste.SOURCE_WID, File server/Query/Optimizer/SmartScheduler/PhysicalRequestGenerator/Src/SQOSPSimplifyJoin.cpp, line 118."
Thank you in advance.
Ramon Cortez

Hello,
Thank you for your help.
Now I'm getting this error: "None of the fact tables are compatible with the query request Fact.SOURCE_WID". ---> Fact.CAMPAIGN_WID
I'm actually not sure about the behaviour of the content tab. As I understood, I must use Total for non-conformed dimensions and detail for conformed, right?
In this case I have:
ASSET (DIMENSION) ------------ ASSET (FACT) ----------------- PERSON (DIMENSION) ----------------- CAMPAIGN (FACT) ---------------- CAMPAIGN (DIMENSION)
So, at Asset (FACT) content tab I have to set detail for Asset (DIM) and Person (DIM) and total for Campaign (DIM).
At Campaign (FACT) content tab I have to set detail for Campaign (DIM) and Person (DIM) and total for Asset (DIM).
But at the columns, if I set detail for Campaign(DIM) as total, all the other columns will show only Campaign at content tab. Why is it happening?
My requeriment measure is like:
SUM(CASE WHEN Asset.Date1 BETWEEN Campaign.DateA and Campaign.DateB AND Asset.Product = Campaign.Product and Asset.Status = 'Active' THEN 1 ELSE 0 END)
How can I do this using person as conformed dimension?
Thanks,
Ramon Cortez

Prevent the same user login on multiple computers at the same time

prevent the same user login on multiple computers at the same time

Is there any way (currently running 2012 Servers) that we can prevent users from logging into multiple domain computers simultaneously with the same username?
We still want them to log into those computers, just not simultaneously?
LimitLogin utility not work in Windows 2012 server.
Thanks.
Babu
Unfortunately Windows has never offered this feature as a built-in feature, but there are several possibilities discussed in these articles:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/0103b5e7-0db5-4fb4-bfe7-d7132983880a/limit-concurrent-logins-on-a-ws-2008-environment
http://www.edugeek.net/forums/windows-server-2008-r2/61216-multiple-logins.html
http://windowsitpro.com/windows/prevent-multiple-logons-gpos
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Multiple products in the same domain

Similar Messages

Maybe you are looking for