Multiple profile + no blocking instance

I'm a developer working on Linux, and I have 2 profiles: Nav (normal Navigation) and Dev (Developer profile).
I haven't found a way to run those profiles independently and in a NO BLOCKING way.
I mean... I run Nav, then Dev and I want to see them opening in separate windows. Then run again Nav and Dev they BOTH must not say "there is another instance....", they must open again (in a new window or reusing the existing).
The solution with -no-remote isn't OK, because it blocks the opening of 2nd instance.
Basically I must have 2 Firefox icons and, at any time, clicking one icon must always open the right profile independently from what is already opened. I don't care if it opens a new tab or window.
Regards,
Rik

Yes it works! :-)
With Netbeans I also had to change the parameters
from
-remote "openURL({URL})"
to
-new-tab {URL}
otherwise openURL() reuse in any case the first Firefox available (the last instance opened) even if I tell him to open /opt/ffdev/firefox instead of /usr/bin/firefox
So now it's all OK.
Thanks a lot!
Rik

Similar Messages

Using the the multiple profiles and running more than one instance of Fire fox at atim

I use F/F in a gaming situation I needed to be able to run more than one session at a time and read about a feature called multiple profiles. Then I read iin another forum that I could have multiple instances with the following bat file :
@echo off
set MOZ_NO_REMOTE=1
start "" "C:\Documents and Settings\Hilton Wiggins\My Documents\Fire Fox non Beta\firefox.exe" -p-no-remote
set MOZ_NO_REMOTE=0
I also have the Beta 4.06 on my machine and even though the batch file directs it to wither the Beat or the Non Beta they both seem to track the profiles and can be used in either version.
However It's not working as I described running two browsers with grease monkey it will start to mis handle data and they both lock up

There is no need to set MOZ_NO_REMOTE, remove that part of the bat file. Change the start line to:
start "" "C:\Documents and Settings\Hilton Wiggins\My Documents\Fire Fox non Beta\firefox.exe" -no-remote -p "profile name"

ORA-27046: file size is not a multiple of logical block size

Hi All,
Getting the below error while creating Control File after database restore. Permission and ownership of CONTROL.SQL file is 777 and ora<sid>:dba
ERROR -->
SQL> !pwd
/oracle/SID/sapreorg
SQL> @CONTROL.SQL
ORACLE instance started.
Total System Global Area 3539992576 bytes
Fixed Size 2088096 bytes
Variable Size 1778385760 bytes
Database Buffers 1744830464 bytes
Redo Buffers 14688256 bytes
CREATE CONTROLFILE SET DATABASE "SID" RESETLOGS ARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'/oracle/SID/sapdata5/p11_19/p11.data19.dbf'
ORA-27046: file size is not a multiple of logical block size
Additional information: 1
Additional information: 1895833576
Additional information: 8192
Checked in target system init<SID>.ora and found the parameter db_block_size is 8192. Also checked in source system init<SID>.ora and found the parameter db_block_size is also 8192.
/oracle/SID/102_64/dbs$ grep -i block initSID.ora
Kindly look into the issue.
Regards,
Soumya

Please chk the following things
1.SPfile corruption :
Startup the DB in nomount using pfile (ie init<sid>.ora) create spfile from pfile;restart the instance in nomount state
Then create the control file from the script.
2. Check Ulimit of the target server , the filesize parameter for ulimit shud be unlimited.
3. Has the db_block_size parameter been changed in init file by any chance.
Regards
Kausik

Enable multiple profiles for data entry profile in HRESS_A_CATS_1

Hi,
We are trying to migrate from JAVA web dynpro to abap web dynpro.
Can any one tell me how to activate multiple profiles in cats record & release application.
I created one custom application configuration for hress_a_cats_1 from hress_ac_cats_1 and togged on the multiple profiles feild. But, when i test the configuration hresss_ac_cats_1 it still calls the standard config but not my custom config.
I have even assigned this custom config but it does not call what else do i need to do ?

Harsha i have this problem in ABAP Stack so no iviews. Thanks though.
Teja,
Thanks for the answer.
What i did exactly is went to T-code: lpd_cust where we maintain all the applications.
Open the Role: ESS and Instance MENU.
Drilled down to : Employee Self Service-> Working Time-> Time Recording-> Record Working Time
Click on Advanced parameters
Change the configuration name to custom name from standard.

When loading multiple profiles, Flash based pages crash the last launched profile

I launch multiple profiles to load groups of web pages. Anywhere from 1-4 profiles in the morning (but not all at once). If one profile is completely loaded and has flash elements, when I launch the next profile that has flash based elements, the last profile launched will crash that instance of Firefox. This did not happen in Beta 11, but does happen in Beta 12 or RC1.
I am running Win7 64-bit with the latest version of Flash (10.2.152.32). 24GB of RAM, Dual Xeon's, Intel SSD.

If this isn't support then why oh why does Firefox have a Profile Manager to do this?

Multiple profiles/users on the same device

Hi there,
I know that iOS is a single user environment.
But, I am currently working in an enterprise environment and I was wondering if it was possible to have several profiles on the same device, maybe using certificates or so?
Thanks for your help
Cheers,
Pierre.

It would seem that unlike previous iOS devices the iPad and possibly AppleTV call for the ability to enable multiple profiles/users on the same device.
I would suggest that if this capability is not on the roadmap for iOS by now then there is a least one place where alternatives to the iPad will have a major advantage.
The thought they I would have to buy multiple iPads one for myself, my wife and my child because of a software constraint is untenable from a ecological standpoint (all these devices end up as landfill) let alone the economic one.
Also as I use the iPad I see it's potential to become as important computing platform to me as my laptop eventually surpassing it. In this light I can't see how it could remain just a personal device.

Cant open multiple profiles at the same time on Outlook.

So i have done some research and found that you can use command line switches to open different profiles in Outlook.
e.g. "C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE" /profiles "ProfileName"
What i want to do is open two different profiles at the same time. So i already have one profile open, i use the method above, however it simply opens a copy of the profile i already have open rather than the one i defined in the command line switch?
I know it works because if i don't have a profile open it opens the profile i specify. Is this by design? If so what is the point in having a profile switch? If someone could help me get this working it would be great.
Thanks in advance.

Hi Eric,
Thanks for confirming this. We already have all the mailboxes that she wants on her main profile. The problem is that Outlook cant handle processing all of these at the same time and continuously crashes and hangs. As i said previously the .ost for her profile
was 16GB, i have managed to reduce to 9GB but Microsoft themselves say that anything above 5GB needs extra hardware power for a good user experience.
http://support.microsoft.com/kb/2695805/en-gb
Up to 5 gigabytes (GB): This file size should provide a good user experience on most hardware.
Between 5 and 10 GB: This file size is typically hardware dependent. Therefore, if you have a fast hard disk and lots of RAM, your experience will be better. However, slower hard disk drives,
such as drives that are typically found on portable computers or early-generation solid-state drives (SSDs), experience some application pauses when the drives respond.
More than 10 GB: When the .ost file reaches this size, short pauses begin to occur on most hardware.
Very large (25 GB or larger): An .ost file of this size increases the frequency of short pauses, especially while you are downloading new email messages. However, you can use Send/Receive
groups to manually sync your mail. For more information about Send/Receive groups, see the "Are you synchronizing many RSS feeds?" section.
I find it surprising that you cant have multiple profiles with different mailboxes when you consider you can only have an .ost up 5GB to have a good user experience. Maybe this is something the developers can put into the next version of Outlook? Or release
as a patch?

I have multiple profiles and want to go back to a single profile without losing data or programs that are not shared

Hi
I need help
My partner has set up multiple profiles on the iMac and has not done the sharing of files and software correctly. Therefore we have some programs that do not operate in all profiles. I want to go back to a single profile but need to be sure I am not going to lose any data or programs in the process.
Can any one give me a step by step guide - I am not mac savvy.
Thanks in advance

Hello!
I recently just downloaded the 'Waze' app as a backup for my Garmin. I've read a few reviews that seem to rant and rave about how good the GPS app is. It is community driven and maps are constantly being updated by users. Plus it has a few other fun stuff in it (something similar to Gasbuddy where you can owe prices on the map). But like the person above me said, there is lots of useful free GPS apps in the App Store.
Oh and I may be wrong but I remember reading an article about Google being slower about updating its maps system--ie no turn by turn voice, which many people have had complaints about.
Happy Searching!
Ps - if you switch I wouldn't go to Blackberry.

Problem In Update Statement In Multiple Record Data Block

Hi Friends,
I have problem in update Statement for updating the record in multiple record data Block.
I have two data Block the master block is single Record block and the 2nd data block is Multiple Record data Block.
I am inserting the fields like category,and post_no for partiular job in single data block
Now in second Multiple Record Data Block,i am inserting the multiple record for above fileds like no. of employees work in the position
There is no problem in INSERT Statement as it is inerting all record But whenever i want to update particular Record (in Multiple Block) of employee for that category and Post_no
then its updating all the record.
my code is Bellow,
IF v_count <> 0 THEN
LOOP
IF :SYSTEM.last_record <> 'TRUE' THEN
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
IF SQL%NOTFOUND THEN
INSERT INTO post_history(post_no,roster_no,category,idcode,joining_post_dt,leaving_post_dt,entry_gp_stage)
VALUES(g_post_no, g_roster_no, g_category, :POST_HISTORY_MULTIPLE.idcode, :POST_HISTORY_MULTIPLE.joining_post_dt,
:POST_HISTORY_MULTIPLE.leaving_post_dt,:POST_HISTORY_MULTIPLE.entry_gp_stage);
END IF;
next_record;
ELSIF :SYSTEM.last_record = 'TRUE' THEN
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
IF SQL%NOTFOUND THEN
INSERT INTO post_history(post_no,roster_no,category,idcode,joining_post_dt,leaving_post_dt,entry_gp_stage)
VALUES (g_post_no,g_roster_no,g_category,:POST_HISTORY_MULTIPLE.idcode,
:POST_HISTORY_MULTIPLE.joining_post_dt,:POST_HISTORY_MULTIPLE.leaving_post_dt,:POST_HISTORY_MULTIPLE.entry_gp_stage);
END IF;
EXIT;
END IF;
END LOOP;
SET_ALERT_PROPERTY('user_alert',ALERT_MESSAGE_TEXT, 'Record Updated successfuly' );
v_button_no := SHOW_ALERT('user_alert');
FORMS_DDL('COMMIT');
CLEAR_FORM(no_validate);
Please Guide me
Thanks in advence

UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;These update statements are without where clause, so it will update all records.
If it is specific to oracle forms then u may get better help at Forms section.

Where's the WHEN-NEW-BLOCK-INSTANCE trigger gone?

Not a rehash of my famous UKOUG presentation but a genuine question.
If I start up a Form with ENTER_QUERY in the WHEN-NEW-FORM-INSTANCE trigger then WHEN-NEW-BLOCK-INSTANCE never fires. I just get a WHEN-NEW-RECORD-INSTANCE. This is true whether the query is executed or cancelled.
I have replicated this behaviour inb both Forms 4.5 and 9i Forms so I assumed this is standard behaviour and well-known by everybody but me. The question is: why is Forms designed like this? I can just about see why WHEN-NEW-BLOCK-INSTANCE might not fire in QUERY-MODE, even though WHEN-NEW-RECORD-INSTANCE does, but why doesn't it fire after the query is executed or cancelled?
Cheers, APC

Interesting...
I am aware that the when-new triggers do not run in some cases. On the other hand, the post- triggers run over and over again, to the point that I just don't use them because any code put there executes too many times.
If you have several go_item or go_block triggers in a key trigger or when-button-pressed trigger, the when-new-item-instance trigger does not run each time you do a go_item. Instead, the when-new triggers ONLY run on the last item or block, just after my key-trigger code completes, and just before control returns to the user.
So it would seem natural that if you go_block in a when_new_form_instance trigger, and execute an Enter_Query command, then the when-new-block-instance would not run.
The fact that it does not run once you cancel the query just doesn't seem right, though.

DB Cloning.file size is not a multiple of logical block size

Dear All,
I am trying to create database in windowsXP from the database files running in Linux.
When i try to create control file, i m getting the following errors.
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'D:\oracle\orcl\oradata\orcl\system01.dbf'
ORA-27046: file size is not a multiple of logical block size
OSD-04012: file size mismatch (OS 367009792)
Pls tell me the workarounds.
Thanks
Sathis.

Hi ,
I created database service by oradim. Now i m trying to create control file after editing the controlfile with the location of windows datafiles(copied from Linux)
Thanks,
Sathis.

Org detemination when user attached to multiple profiles in IC webclient

Hi,
I am having a problem with org determination in IC webclient when a particular user is attached to multiple profiles.
The scenario is as follows:
1. Log into IC webclient
2. Indentify and confirm an account
3. Select and confirm an IBase
The IBase here is basically used for partner determination.
4. Go to the Service Ticket and enter you details and save it.
The issue is as follows:
When the user who is logged into the IC webclient is attached to a single profile then org determination happens correctly and the partner determination procedure is subsequently triggered to determine all the partners from the IBase.
Now when the user is attached to multiple irg units because of some business reasons then the org determination does not happen because the user is attached to multiple org units in the org structure and hence the subsequent partenr determination is also not invoked.
I am sure of one thing that if the org determination happens correctly then the partner determination will also happen correctly and the all the partners from the IBase will be determined.
My query:
After the user has uniquely selected a profile indicating which org unit he wants to currently work with how do I ensure that the org determination succeeds. In other words how do I ensure that the org determination now occurs based on the profile selected in IC web client.
Thanks and regards
Murli Rao

Hello Vin,
 I have created a new rule. This is a copy of rule 10000194.
The problem I am faced with is that the function module mentioned in the rule is not invoked.
My observations are as follows:
1. In function module CRM_ORGMAN_DETERMINE_ORGOBJS the there is a call which is as follows:
 CALL FUNCTION 'CRM_ORGMAN_FIELD_CATALOG_VALUE'
 EXPORTING
 iv_ref_guid = iv_ref_guid
 iv_ref_kind = iv_ref_kind
 iv_scenario = iv_scenario
 iv_act_object = iv_act_object
 is_reference_partner_wrk = is_reference_partner_wrk
 is_orgman_com = is_orgman_com
 iv_container_mix = iv_container_mix
 iv_bal_log = iv_bal_log
 IMPORTING
 et_act_cont = lt_act_cont
 EXCEPTIONS
 no_values_found = 1
 OTHERS = 2.
 Now the call above is used to get the container values which will be used during rule determination. I have not maintained any container objects in the rule itself. But since the rule is attached to an Organizational data profile the following are a part of the container:
Sales Organisation, Distribution Channel, Division, Sales Office, Sales Group.
Unfortunaely there is no value determination available for these objects. Hence when the above function module return the variable lt_act_cont has 5 rows and the value of sy-subrc = 1 because there was no value determination.
2. The same thing happens for the default rule 10000194. But the lines after the function module will tell as to why for the standard rule the function module is called and not for my rule. The lines are as follows:
 IF ( sy-subrc = 0 ) OR ( lt_act_cont[] IS INITIAL ) OR
 ( iv_act_object = 'AC10000194' ) OR
 ( iv_act_object = 'AC14000178' ).
As you see the rule has been hardcoded and hence everythings seems to work fine.
How can I overcome this issue.
Thanks and regards,
Murli Rao

Multiple profiles

Is there a hit in performance with multiple profiles? Say 20 or 30 profiles. And if so, is it in application performance as in simple use or is it in render times when you are waiting for a project to render?
Thanks.

1327/3773
Hi Todd,
Do you mean 20 or 30 User Accounts?
Anyway, a general approach about Mac OS X memory management:
When a task is running, it uses as much memory (+ virtual memory) as it can find left. Other running tasks share the memory at the same time, but they will "give away" some or all memory they are using (thus slow down), in favor of the main task.
This is roughly, not exactly detailed of course, how it works, no matter if the "secondary" tasks are being ran by the same User, by another (others) User(s), or by the System (although system tasks usually don't give away much of their default memory...).
To observe all this very clever and efficient Mac OS X behaviour, use Activity Monitor: Watch "All Processes", you'll see how some are slowing down when others need more juice.
Of course if other Users Accounts or apps are simply logged out or closed, they simply don't have any performance influence.
In a word
(concerning User Accounts):
As long as you don't run many tasks at the same time, there will be no performance hit for the one application you are running.
Of course if you are talking about more tasks to be run within the same application, certainly the application will not run as smoothly, quickly, as if it was doing only one simple task.
I hope this helps, or did I misunderstand your question completely?
Axl

Installing CRM Online for Outlook with multiple profiles

For a number of reasons I have had to create multiple profiles in Outlook. I also have a Microsoft CRM account. Up to this point I have been able to successfully install and use CRM for Outlook on my previous profiles. However, when the last profile was
created the CRM for Outlook functionality did not install. / transfer. I have tried uninstalling the CRM for Outlook and reinstalling. No luck it only crashed an old profile which appears now to be inoperable. It is essential that I get the latest Profile
working the CRM for Outlook Any suggestions?

Hi,
As per the description, I understand that it's an issue about CRM Online for Outlook.
This is the forum to discuss questions and feedback for Microsoft Office client. To get better assistance, I would suggest you to post in
Microsoft Dynamics CRM Forum, where you can get more experienced responses:
https://community.dynamics.com/crm/f/117.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Multiple profile help needed

I work for a company that requires me to connect to several customer Cisco VPNs via AnyConnect 3.0.5075.
Each customer site has provided it's own URL and certificate, etc.
How do I get Cisco AnyConnect Secure Mobility Client version 3.0.5075 to agree to multiple profiles?
I also would love some advice on how to add certificates to the tool without the "double click the certifiate" route. My laptop has an encrypted hard drive and when I try and "double click" the Cisco certificates the hard-drive encryption tool believes I am trying to add a certificate to it instead of to the Cisco VPN tool.
AnyConnect does not appear to have any editable/configurable settings for multiple profiles or to directly add a certificate.
I have googled furiously to no avail.
Any help available here? Even just to give me some bumps in the right direction?
Thanks in advance.
-Jim

Hi Jim,
You can have multiple profile bind to different certificates
For example
crypto ca certificate map mymap 1
subject-name attr cn eq Joe Smith
crypto ca certificate map mymap 2
issuer-name co SubCA1
crypto ca certificate map mymap 25
alt-subject-name eq [email protected]
subject-name attr ou co Sales
crypto ca certificate map mymap 65535
subject-name ne ""
SSL certificate mapping applies to both clientless WebVPN and AnyConnect connections where certificates are used. The certificate-group-map entries are processed in the order they are entered and appear above until a match is found. They do not need to be in numerical order.
webvpn
certificate-group-map mymap 1 Tunnel-group1
certificate-group-map mymap 2 Tunnel-group2
certificate-group-map mymap 25 Tunnel-group3
certificate-group-map mymap 65535 Tunnel-Group4
The certificate selection can be done automatically by enabling the automatic certificate selection in the XML profile
Hope this helps you.
Thanks
Raj

Multiple profile + no blocking instance

Similar Messages

Maybe you are looking for