Multiple profiles with different cache settings
I want to have multiple profiles with different settings for the cache. I'll call them ProfileOne and ProfileTwo for simplicity's sake. ProfileOne I want to clear its cache on exiting Firefox and on ProfileTwo have it retain its own cache. I have already setup both profiles and configured them accordingly with ProfileOne's privacy settings for Clear History > Cache checked so it clears on exit and ProfileTwo is not set to clear anything on exiting.
The main issue is that after doing something with ProfileTwo then switching to ProfileOne, upon exiting ProfileOne it also deletes ProfileTwo's cache. I have tried using the profile manager to create the profile in a different location than default to no avail. Is there any way to set it so ProfileOne's cache can still be cleared on exit without affecting ProfileTwo's cache?
After checking a few different options, it looks like the add-on Better Privacy provides the options I need for LSO management and does separate HTML cookies from Flash cookies nicely and lets me save specific site's LSOs. Thanks for the assistance!
Similar Messages
-
BO xi 3.1 u2013 schedule a template for multiple reports with different column
Hi,
I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks!Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan -
Single invoice for multiple orders with different divisions
Dear All,
while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I tried with 003 and 007 etc..but result is same..what configuration need to be done for getting the single invoice
Thanks In advance
Regards
CNRNAIRHello
single invoice for multiple orders with "different divisions" invoice is getting split
FYI - Different Division means different Sales Area.
So, sales doc (whether sales order, Delivery & Billing) is applicable to EXACTLY one sales area.
Thus, combining docs with different sales area is practically impossible.
Provided, you are using common division.
Hope this assist you,
Thanks & REgards
JP -
How can I edit multiple clips with different frame rates on the same timeline
how can I edit multiple clips with different frame rates on the same timeline
You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x -
Is there a way to turn off iMessage for a group text that includes multiple people with different non-apple devices? When a message is sent, only the iPhone users can see the iMessage. Those without them cannot see the texts unless we send individual Text Messages or turn off iMessage completely.
now I have this and it still doesn't work.
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
Option "OffTime" "1"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "false"
EndSection -
Multiple Orders with Different reasons on a Single day
Hi,
I am recently learning Device Management of IS-U Electricity. Now I have a problem with meter reading orders generated at the time of periodic meter reading with reason 01 and different system generated orders with reasons like 22, 21 , 16 and 11 which are the orders get created internally based on device replacement and modification.
If the scheduled meter reading date lies on the day or the day before of device replacement or modification, the meter reading for the periodic order is getting prorated based on the meter reading entered at the time of replacement or modification. This is what I dont want.
Is it possible to have multiple orders with different reasons on the same date? Any configuration changes are welcome.
- ArghyaHi,
You can acheive this using following config changes.
SAP Utilities --> Device Managment -->Meter Reading --> Meter Reading Order -->Order Creation --> Define Automatic Interpolation for Meter Reading Reason.
Uncheck the 'Auto Interpolation' flag for Meter Reading reason 01.
This will not use the Replacement or Modifiaction read.
Let me know if anything more is reuiqred.
Thanks and Regards,
Ranjit Thakur. -
Define Multiple Taxes with different Accounts
Dear Members
I have defined tax in Oracle R12 . and defined multiple rates. these all tax deducted in a single Tax account. but my requirement is, there should be multiple taxes with different acccounts. when I define multiple taxes the system gives error unable to Calculate the tax. when I only enable one tax it works.
Current sanario tax rates
2% Account # 666461
3% Account # 666461
3.5% Account # 666461
Required Sanario
2% Account # 666461
3% Account # 666462
3.5% Account # 666463
Should be different
Do you have any Idea How I configure it.Hmmm, thought I did that but ran into issues...Will give it a harder look.
Thank you for your reply, tt2...BTW, I've been reading these forums for awhile now and your replies in other posts have helped me so thanks for all of them, too... -
Printing multiple PR with different line items in smartform
Hello all,
I have an requirement to print multiple PR with different line items on different pages.
So,suppose two PR are there,PR1 and PR2 with n no of line items,then i should get each PR on different page with its line items.
Note: One loop processing is already there on line items.
Best Regards,
AnurodhHi,
Fetch all the PRs and its corresponding items into 2 different table. Then Loop at the internal whihc contains the PRs and call the 2nd internal table for its items and call the FM for smartforms and pass them.
LOOP AT it_PR.
fetch all the items into it_PR_item
Call Function Fnam
Passign the it_PR_item
ENDLOOP.
Regards,
Aditya -
How to go about multiple inclination with different data selection in Delta
We have to copy large amount of data ( more than 42lak of recodes) selectivly from on ODS to other ODS. in delata load ( BW 3.5 enverioment)
I thought of loading data in slices through delta loading with selection condition.
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
Here what problem I am facing.. while doing 2nd time initialization it prompt me to delete the last initialization request form scheduler menu.
if i delete the last request .. will it take the delta for previous initialization selection and new initialization selection. ?
Please advice how to go about multiple inclination with different data selection in delta loading.
Looking forward your reply.Hi,
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
You are correct with this scenario normally. The message you mentioned normally comes up when you open a infopackage and don't change the selection first or in case you have overlapping selections with an already done init.
regards
Siggi -
Running the same code multiple times with different paramters automatica​lly
Hi guys,
I want to run the same code multiple times with different paramters automatically. Actually, I am doing some sample scans which takes around 2 hours n then I have to be there to change the paramters and run it again. Mostly I do use folowing paramters only
X_Intial, X_Final, X-StepSize
Y_Intial, Y_Final, Y-StepSize
Thanks,
DushyantAll you have to di is put all of the parameters for each run into a cluster array. Surround your main program with a for loop and wire the cluster array through the for loop. A for loop will autoindex an input array so inside the for loop you just have to unbundle the cluster to get the parameters for each run.
Message Edited by Dennis Knutson on 07-13-2006 07:50 AM
Attachments:
Cluster Array.JPG 9 KB -
Design a single template for multiple reports with different column order
Hi,
I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks in advance.-As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
-I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
For the customer that want the same ordering of columns you can put those customers under one condition.
for Example...
if(?Client in ['clientA','clientA']) then
<TableName>.<Field>......
-What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
Regards,
Amrita
Edited by: Amrita Singh on May 21, 2009 7:54 AM -
Radar chart with multiple KPIs with different scales in dashboard4.0
Hi Experts,
How to create a radar chart which is having multiple KPIs with different scales. ?
Thanks in Advance
SaiduluHi Sai,
Customizing the chart is not possible, example the data in you criteria is like the below.
Take four row based chart to display the row based values, if the columns are having different values. Take column based chart if the difference in row based, hope you got it.
Use the label in combo box and use the dynamic visiblity to call the chart from the back.
Hope you got the idea.
--SumanT -
How do I send docs to multiple signators with different email addresses on Echo sign ?
How do I send docs to multiple signators with different email addresses on Echo sign ?
Thanks man...the problem could be on the signators side.
Rick Schell...Realtor, ABR
www.rick-the-realtor.com
Cell 615-804-3085
Crye-Leike Realtors
Office 615-373-3513
Fax 615-373-5228
Quoting Echosign-Rob <[email protected]>:
Echosign-Rob created
the discussion
"How do I send docs to multiple signators with different email
addresses on Echo sign ?"
To view the discussion, visit:
https://forums.adobe.com/message/6395941#6395941
> -
Multiple circle (with different diameters) on xy graph
Hi, I am looking for solution to the above posted problem. I've been researching and all the results yields by using "Draw Circle by radius.vi" but i would like it to be shown on a XY Graph that has multiple circles with different radius (sort of like a Bull's eye).
I also found a alternative solution with the for loop that has "PI" multiply with the loop iteration divided by 50 and the values are passed through Sine and Cosine functions with it bundled to be displayed on XY Graph. But i have no idea how to control the radius to make it smaller or bigger.
Help Please
Solved!
Go to Solution.This is my progress.
My project is supposed to recieve coordinates data serially and plotting on a graph for a hospital test by using Gyro and Accelerometer.
Attachments:
progress.png 14 KB -
Having Multiple Adobe PDF printers with different output settings
Hello,
My company is using Adobe Acrobat X and XI on Win 7 Pro, and we would like to create 2 separate Adobe PDF printers that have 2 different output settings. So I installed a second Adobe PDF printer using the same Adobe Converter Driver as was used to install the first one. Then, I went into Devices and Printers and I edited the printing preferences of one Adobe PDF printer, but what I found was when I changed the preferences of one printer, it automatically changes the other one as well. Is there a way around this?Thanks for pointing me to the iTunes Folder Watch program. It looks like this will solve my immediate needs. It's a little clunky in spots, but does handle adding new files very well. And it only cost about $10 to get the fully functioning version with the automatic monitoring in the background.
I copied the iTunes library files to each account, setup a watch folder that points to the location of the iTunes library content and all the music syncs up perfectly without duplicates. I have yet to test the applications, but music, movies, TV Shows, audiobooks, and podcasts all work fine.
If anyone else is considering this product, just make sure you double check your file location in the iTune settings to make sure each account is pointing to the same location and is organizing the content in the same way or else the individual account libraries will fight against each other to organize all the content where it is configured to put it. Copying the library files isn't enough since some of these settings are in the Windows Registry.
I made this mistake at first. I had all the accounts pointing to the same folder, but one of them (the original) had the "Upgrade to iTunes Media Organization" turned on which categorizes all content into folders based on type such as music, movies, podcasts, etc. Since the others were organizing just based on artist and album this caused the accounts to try to reorganize the files when Folder Watcher would tell it there were new files to manage.
All in all, this solves most of my concerns, but I'm still surprised Apple hasen't added this natively into the iTunes product. Especially when this guy figured out how to write the software to do it and is only charging about 10 bucks to do it. Well I hope this guy makes a million bucks off his little product bacause he surely deserves it!
Maybe you are looking for
-
Please Help ! I bought Logic studio, with logic pro 9.0.0 last year, worked perfectly on my macbook pro. Just got a new mac pro, with macos 10.7 Lion.. I install the software, serial works, then I update the software,because 9.0.0 can't open in os 10
-
Hi anyone/everyone, I restored my phone to factory settings to get rid of my text messages as my iphone wouldn't let me delete them. I had backed up on iTunes before this. Whilst it it was wiped it somehow must have synced the blank version of my iph
-
IPad mini and Apple TV reviews...
Is anyone using this combination with a projector??? I want to use it in my classroom but have noticed a few posts where people have mentioned the scaling is off. Please let me know if you are using the ipad mini/apple tv/projector combination and if
-
Difference in UCCX historical reports
'Agent summary report' is showing average talk time "00:02:45" and when I manually calcuate the average talk time from the report "Agent state detail report" (by adding the total talk time and dividing it with total number of calls) it gives me avera
-
Does anyone know where I can get a skin or some form of protecti've cover for a Creative Zen. I've tried a few places but all seem to just be for the Zen Micro. Thanks