Multiple projects combined into one .exe file

Hi there.
I'm new to Captivate and have a task that is just daunting to
me. I have a very lengthy CBT which I do not want to build using a
menu, but rather a continuous string of lessons that prints a
certificate of completion at the end. I am faced with several large
file sizes that will not fit in one project (I've kept each project
less than 55 slides & cleaned up the unused library items).
However, I need to publish to only one .exe file, and it doesn't
seem like daisy chain-ing fits my requirement (for just one .exe
file). Is this even possible, and how do I do this in Captivate3?
(My Flash skills are nil.)
Thanks in advance for your reply.

Welcome to our community, Georgia
Sorry, but there is no way to consolidate all the files into
a single file unless you combine them into a huge gnarly project.
The only option that would seem to make sense is to daisy-chain
them together, but it seems you have precluded this.
Cheers... Rick

Similar Messages

Multiple Idocs (DEBMAS06) into one single file

Hi All,
Multiple Idocs(DEBMAS06) are sent from SAP in bulk to be sent to FTP server via XI...(Cannot use Append the file as The structure is with Header,Detail(all the idoc details) and Trailer)
I have seen different threads which speaks about the same,
But Please suggest me the best approach to proceed with this kind of scenario...
Multiple IDocs -> XI -> Flat file which is speaking about BPM and also Packaging(SAP note 814393)
and https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ea2fdf-f047-2a10-d3a2-955a634bde6b
(How Tou2026 Send Multiple IDocs Within One XI Message)
I prefer not to use BPM... but if required then....
Please suggest me which is the best approach to proceed with it..
Thanks and Regards,
Sridhar Reddy

Hi ,
I had tried the scenario Multiple IDOC's coming from R/3 and send all of them into a Single File
But it did not work...
Of course i changed as Micahel mentioned in
The specified item was not found.
(Collect and make pack size to 50) but still the idocs are posting as 50 messages in XI and 50 files are being created ...
But as per his remarks we need customization which is very difficult...
And also i checked Michaels blog
The specified item was not found.
But this is dicussing reverse of my scenario...
and finally i am thinking of going with the stefens weblog...
Collecting IDocs without using BPM
Can any one please suggest any other best way to handle this...
Instead of going for BPM i am implementing as Stefen suggested ... This is because we have many such interfaces where SAP sends collective idocs....
Regards,
Sridhar Reddy
Edited by: sridhar reddy kondam on Oct 22, 2008 6:20 AM

How do I consolidate multiple PDF pages into one iBook file ?

I have a big test coming up, and I have 600 practice questions saves as PDF's on my iMac. I tried downloading them through iTunes on my iPad, but it looks like they downloaded as 600 individual iBook files. Needless to say, it will waste a lot of time opening up and closing each page.
Is there a way to "consolidate" all 600 of these PDF files, so that they appear as one single iBook file? I would really like to study by turning the page, instead of being forced to close each file and open a new one 600 times.
Thanks!

Good to know -- there is no file format "Adobe Acrobat Reader" and there is no application "Adobe Acrobat Reader".
The file format PDF is what Acrobat can create and manipulate.
(Acrobat is a "for pay" desktop application.)
Adobe Reader ( a free to download, install and use application) can open and let one view PDF files.
To combine PDF files you would use Acrobat.
An alternative would be to subscribe to Adobe's online subscription service "PDF Pack".
Be well...

File will not combine into one

why wont my files combine into one pdf file? I have converted each one into a pdf file, now, I have went through all of the steps to combine, press combine and it just sits there.

What is the exact error? Else you could always reinstall your software.

Multiple JSPs output into single PDF file

Could anyone guide me on how do I combine output of multiple JSP files into a single PDF file? I have got 8 different reports and shall required to have single output of all of them in a PDF file. Its urgent. Please help.

Hi Mahalakshmi,
Clik on the link to view document: <b>[Combining Multiple Smartform Outputs Into One PDF File|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/62ae7fcd-0b01-0010-3e9d-a54f26944450?overridelayout=true]</b>
Thanks
Venkat.O

Can we combine multiple excel files into one excel file using SSIS?

I have a bunch of excel files in a specified folder. I wanted to combine all the excel files into one excel file by adding additional tabs in one excel file. Can I do this using SSIS?
OR
I know using macro we can combine multiple excel files. Can we run a excel macro in SSIS? Please help me.
Actually the complete package is this:
Step1: Using FTP task I'm downloading the bunch of excel files into a folder.
Step2: Above implementation is the second step that I have to do.

You can do it in two steps
1. First get all data from excel sheets to a sql staging table. For that you need to use a looping logic as explained in below link (you dont required the additional logic used for checking file name etc in below example as you need all files). Also make
source as excel instead of flat file
http://visakhm.blogspot.in/2012/05/package-to-implement-daily-processing.html
2. Once you get the data onto a single table, use below to get it exported to multiple sheets within same excel destination file
http://visakhm.blogspot.in/2013/09/exporting-sqlserver-data-to-multiple.html
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to combine multiple webservices into one WSDL file

Gurus,
I have 4 four webservices(ws1,ws2,ws3 & ws4) defined in XI. Normally in XI when we define webservice ,WSDL file will be generated for each interface. Now I have 4 related interfaces, so 4 WSDL files will generated. Suppose if I have 100 webservices then 100 WSDL files need to be generated & need to send to other party to consume our services, which is very tedious task & to track also. So is it possible to combine related webservices into one WSDL file? Your inputs will be highly appreciated.
Regards,
Santhosh

Hi,
Instead of trying to combine the interfaces, you can try to define your interface mapping with 4 sender interfaces with in one interface mapping . I think this may give you the result you are expecting.
If you want entire content to be in one interface , then, define single interface which can accomadate, all message ocntent of all 4 interfaces.Means your sender message to contain the 4 datatypes internally.
Regards,
Reyaz

Hello Apple community... I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.

I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents. When I drag the doc in a line would show up in the past, and if I went above th eline all was good. It doesn't have a line, and no matter what I try I am having no success.
Please help!

According to an Apple Support article, unless there are unforeseen issues
in file ownership or permissions, the combining of .PDFs should be simple.
•OS X: Combining PDF documents using Preview - Apple Support
There are a few variable and similar methods, some change with version
of OS X in use; some vintage OS X may vary a little in the process...
A variety of similar topics appear in search results, with terms:
" mac os x combine pdf into one " such as this page shows...
https://www.google.com/?gws_rd=ssl#q=mac%20os%20x%20combine%20pdf%20into%20one
If the system is older than Mavericks there may be other methods to try.
Suggestions are among linked results in the search. I see a few fair ones.
•Here's another that offers generally similar suggestions...* this info looks OK, extra links, do not:
http://osxdaily.com/2014/06/27/how-to-join-multiple-pdf-files-into-a-single-pdf- document-in-mac-os-x/
{ note: avoid clicking on links to products in * this ^ page, since they likely will not help & may be adware prone }
If you have a problem after trying other methods, based on an OS X
your computer is running, post back with more exact information...
Good luck & happy computing!
edited

How do I join multiple mp3 files into one mp3 file?

Hello,
I have multiple mp3 files that I would like to join into one mp3 file and to use it as an audio book. This explains how to do it, but in iTunes 12, I do not see an option called "Part of a Compilation" option.
Is there a way to do it in iTunes without installing a new app?
Thank you.

Eugene,
Those instructions, if I read them correctly, are about how to collect several MP3s into a single audiobook. They will not create a single continuous MP3.
iTunes does not have the ability to combine multiple MP3s into a single MP3. The best it can do is if you burn them to audio CD and then rip back with "Join Tracks" enabled. The better way is to use an audio editor such as Audacity, or a special purpose combing tool such as MP3 Joiner.

Error Message When Merging Multiple PDF Files into One PDF File

Good Morning,
I have a problem with Adobe Acrobat 9 Pro. I am trying to merge/combine multiple PDF files into one PDF file, but I keep receiving this error message:
Does anyone have a fix for this? Thank you!

To fix:
Provide a unique name for each form field. This includes the individual PDFs fields. As you intend to combine/merge no field name in each of the individual PDFs can be the same.
Be well...

Can Camtasia and Captivate be combined into one project?

Is there a way to seamlessly combine Camtasia and Captivate into a single Captivate project? I'd like to capture screens with Camtasia but use Captivate for its quiz interactivity at the end of the project. Camtasia does a better job of editing screens, zooms and pans are better, but the downside is the larger file size. So, Camtasia would be the first part of the project and Captivate would be the second part. Two projects integrated into one. Any ideas?

Hi there
Interesting thought on combining. No way exists that I'm aware of to seamlessly slice, dice and splice.
You did say someting I'd like to see some clarification on.
Saber25 wrote:
...I'd like to capture screens with Camtasia but use Captivate for its quiz interactivity at the end of the project. Camtasia does a better job of editing screens, zooms and pans are better...
Why is it you feel Camtasia is better at editing? To my knowledge Captivate is better at that. Here's what I mean.
With Camtasia, it's like recording using an older 8MM camera. You end up with film. Now you can split the film apart, trim segments out and splice segments together, but you cannot (to my knowledge and I stand to be corrected on this) edit frames to remove or alter information. For example, in Captivate if I record a screen containing sensitive data such as a person's account number, I'm able to edit the image to obliterate the account number. I might have to repeat the process over a few different slides to do it, but it's reasonably easy to do. I don't believe the same capability exists with Camtasia.
One thought here is that perhaps you might create Flash based SWF output from Camtasia. (I think it will output SWF - If not, choose FLV) Then create a single slide Captivate and insert that SWF or FLV as an object on the slide. Then configure the container Captivate to open your other quiz project.
Or, in thinking that way, just insert a blank slide in your quiz project and place the Camtasia content on that blank slide.
Hopefully something here made sense and will help... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

How do I scan multiple pages into one pdf file using the PIXMA MG7520 on Windows 8.0? Please help!

I recently received a PIXMA MG7520 for a gift. It works great with my lenovo laptop/tablet running on Windos 8.0. The one drawback to the HP all-in-one that it replaced is it does not have an ADF. That being said, there must be some way to scan multiple pages into one pdf file. I need help figuring thing out. Thanks in advance!
Solved!
Go to Solution.

Hi mdtolbert54,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single PDF document. To do this, please follow these steps:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
6. Once all settings have been selected, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen appears.
7. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Scanned items are saved in previously selected folder location specified in the SETTINGS... window.
If you find that you need advanced scanning options such as adjusting resolution, brightness, contrast, saturation, color balance, etc. in addition to the options selected above, please click on the SCANGEAR button on the IJ Scan Utility Main screen, then adjust the items as necessary.
Once the items above are set for document scanning, in the future, you will only need to launch the IJ Scan Utility, then press the DOCUMENT button to perform the scan (unless you want to make changes to the settings).
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do i scan multiple pages into one pdf file

How do I scan multiple pages into one pdf file?

That depends on your scanning software. Adobe Reader doesn't scan.

Read multiple files and save all into one output file(AGAIN)

Hi, guys
I need your help for reading data from multiple files and save the results into one output file. When files are selected from file chooser, my program read the data line by line , do some calculations and save the result into the output. I made an array to store input files and it seems to be working fine, but when it comes to SaveFile() function, issues NullPointException message.
public class FileReduction1 extends JFrame implements ActionListener
   // GUI definition and layout
    /* ACTION PERFORMED */
    public void actionPerformed(ActionEvent event) {
        if (event.getActionCommand().equals("Open File")) getFileName();
    /* OPEN THE FILE */
    private void getFileName() {
        // Display file dialog so user can select file to open
     JFileChooser fileChooser = new JFileChooser();
     fileChooser.setFileSelectionMode(JFileChooser.FILES_ONLY);
        fileChooser.setMultiSelectionEnabled(true);
     int result = fileChooser.showOpenDialog(this);
     // If cancel button selected return
     if (result == JFileChooser.CANCEL_OPTION) return;
        if (result == JFileChooser.APPROVE_OPTION)
         files = fileChooser.getSelectedFiles();
            textArea.setText("");
            if(files.length>0)
                filelist="";
                System.out.println("files length"+files.length);
                for(int i=0;i<files.length;i++)
                     System.out.println(files.getName());
filelist+=files[i].getName()+" ,";
if (checkFileName(files[i]) )
openButton.setEnabled(true);
readButton.setEnabled(true);
textArea.append("file "+files[i].getName()+"is a proper file"+"\n");
readFile(files[i]);
textfield.setText(filelist);
else{JOptionPane.showMessageDialog(this,"Please select file(s)",
                "Error 5: ",JOptionPane.ERROR_MESSAGE); }
     // Obtain selected file
/* READ FILE */
private void readFile(File fileName_in) {
// Disable read button
readButton.setEnabled(false);
// Dimension data structure
     getNumberOfLines(fileName_in);
     data = new String[numLines][4];
     // Read file
     readTheFile(fileName_in);
     // Rnable open button
     openButton.setEnabled(true);
/* GET NUMBER OF LINES */
/* Get number of lines in file and prepare data structure. */
private void getNumberOfLines(File fileName_in) {
int counter = 0;
     // Open the file
     openFile(fileName_in);
     // Loop through file incrementing counter
     try {
     String line = fileInput.readLine();
     while (line != null) {
     counter++;
          System.out.println("(" + counter + ") " + line);
line = fileInput.readLine();
     numLines = counter;
closeFile(fileName_in);
     catch(IOException ioException) {
     JOptionPane.showMessageDialog(this,"Error reading File",
               "Error 5: ",JOptionPane.ERROR_MESSAGE);
     closeFile(fileName_in);
     System.exit(1);
/* READ FILE */
private void readTheFile(File fileName_in)
// Open the file
//int row=0;
int col=0;
openFile(fileName_in);
System.out.println("Read the file");
// Loop through file incrementing counter
try
String line = fileInput.readLine();
while (line != null)
boolean containsDoubles = false;
double temp;
String[] lineParts = line.split("\t");
try
for (col=0;col<lineParts.length;col++)
temp=Double.parseDouble(lineParts[col]);
data[row][col] = lineParts[col];
containsDoubles = true;
System.out.print("data["+row+"]["+col+"]="+lineParts[col]+" ");
} catch (Exception e) {row=0; col=0; temp=0.0;}
if (containsDoubles){ row++;}
System.out.println();
line = fileInput.readLine();
catch(IOException ioException)
JOptionPane.showMessageDialog(this,"Error reading File", "Error 5: ",JOptionPane.ERROR_MESSAGE);
closeFile(fileName_in);
System.exit(1);
//System.out.println("length"+data.length);
closeFile(fileName_in);
process(fileName_in);
/* CHECK FILE NAME */
/* Return flase if selected file is a directory, access is denied or is
not a file name. */
private boolean checkFileName(File fileName_in) {
     if (fileName_in.exists()) {
     if (fileName_in.canRead()) {
          if (fileName_in.isFile()) return(true);
          else JOptionPane.showMessageDialog(null,
                    "ERROR 3: File is a directory");
     else JOptionPane.showMessageDialog(null,
                    "ERROR 2: Access denied");
     else JOptionPane.showMessageDialog(null,
                    "ERROR 1: No such file!");
     // Return
     return(false);
/* OPEN FILE */
private void openFile(File fileName_in) {
     try {
     // Open file
     FileReader file = new FileReader(fileName_in);
     fileInput = new BufferedReader(file);
     catch(IOException ioException) {
     JOptionPane.showMessageDialog(this,"Error Opening File",
               "Error 4: ",JOptionPane.ERROR_MESSAGE);
     textArea.append("OPEN FILE\n---------\n");
     textArea.append(fileName_in.getPath());
     textArea.append("\n");
     //System.out.println("File opened successfully");
/* CLOSE FILE */
private void closeFile(File fileName_in) {
if (fileInput != null) {
     try {
          fileInput.close();
     catch (IOException ioException) {
     JOptionPane.showMessageDialog(this,"Error Opening File",
               "Error 4: ",JOptionPane.ERROR_MESSAGE);
System.out.println("File closed");
private void process(File fileName_in) {
//getNumberOfLines();
     //data = new String[numLines][3];
     // Read file
double temp,temp1;
     //readTheFile();
//System.out.println("row:"+row);
//int number=data.length;
//System.out.println(number);
for (int i=0; i<row; i++)
temp=Double.parseDouble(data[i][1]);
sumx+=temp;
temp1=Double.parseDouble(data[i][3]);
sumy+=temp1;
multixy+=(temp*temp1);
square_x_sum+=(temp*temp);
square_y_sum+=(temp1*temp1);
//System.out.println("Sum(x)="+sumx);
double tempup=(row*multixy)-(sumx*sumy);
double tempdown=(row*square_x_sum)-(sumx*sumx);
slope=tempup/tempdown;
double tempbup=sumy-(slope*sumx);
intb=tempbup/row;
double tempside=(row*square_y_sum)-(sumy*sumy);
double cordown=Math.sqrt(tempdown*tempside);
corr=tempup/cordown;
r_sqrt=corr*corr;
     textArea.append("Data for file"+ fileName_in.getName()+" have been processed successfully.");
     textArea.append("\n");
     textArea.append("Please enter output file name including extension.");
System.out.println("number"+row);
System.out.println("slope(m)="+slope);
System.out.println("intecept b="+intb);
System.out.println("correlation="+corr);
System.out.println("correlation="+r_sqrt);
saveFile();
private void saveFile()
textArea.append("SAVE FILE\n---------\n");
if (openFile1())
     try {
          outputToFile();
catch (IOException ioException) {
          JOptionPane.showMessageDialog(this,"Error Writing to File",
               "Error",JOptionPane.ERROR_MESSAGE);
private boolean openFile1 ()
     // search for the file path
StringBuffer stringpath;
title=textfield1.getText().trim();
int temp=fileName_in.getName().length();
int temp_path=fileName_in.getPath().length();
int startd=(temp_path-temp);
stringpath=new StringBuffer(fileName_in.getPath());
stringpath.delete(startd, temp_path+1);
//System.out.println("file-path="+temp_path);
//System.out.println("length-file="+temp);
path=stringpath.toString();
fileName_out = new File(path, title);
//System.out.println(file_out.getName());
if (fileName_out==null || fileName_out.getName().equals(""))
     JOptionPane.showMessageDialog(this,"Invalid File name",
               "Invalid File name",JOptionPane.ERROR_MESSAGE);
     return(false);
     else
try
boolean created = fileName_out.createNewFile();
if(created)
fileOutput = new PrintWriter(new FileWriter(fileName_out));
fileOutput.println("File Name"+"\t"+"Slope(m)"+"\t"+"y-intercept(b)"+"\t"+"Coefficient(r)"+"\t"+"Correlation(R-Squared)");
return(true);
else
fileOutput = new PrintWriter(new FileWriter(fileName_out,true));
return(true);
catch (IOException exc)
JOptionPane.showMessageDialog(this,"Please enter the file name","Error",JOptionPane.ERROR_MESSAGE);
return(false);
private void outputToFile() throws IOException
// Initial output
     textArea.append("File name = " + fileName_out + "\n");
     // Test if data exists
     if (data != null)
     fileOutput.println(fileName_in.getName() +"\t"+ slope+"\t"+intb+"\t"+corr+"\t"+r_sqrt);
textArea.append("File output complete\n\n");
     else
textArea.append("No data\n\n");
     // End by closing file
initialcomp();
     fileOutput.close();
private void initialcomp()
slope=0.0;
intb=0.0;
corr=0.0;
r_sqrt=0.0;
sumx=0.0; sumy=0.0; multixy=0.0; square_x_sum=0.0; square_y_sum=0.0;
for(int i=0;i<data.length;i++)
for(int j=0;j<data[i].length;j++)
data[i][j]=null;
/* MAIN METHOD */
public static void main(String[] args) throws IOException
     // Create instance of class FileChooser
     FileReduction1 newFile = new FileReduction1("File Reduction Program");
     // Make window vissible
     newFile.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     newFile.setSize(500,400);
newFile.setVisible(true);
Sorry about the long lines.
As you can see, all input files saved in array called files, however when OpenFile1() function is called, it take input (fileName_in) as a single file not an array. I'm assuming this causes the exception.
When there's muptiple inputs, program should take each file from getFileName() to outputToFile() sequentially.
Does anybody have an idea to solve this?
Thanks a lot!!

you naming convention is confussing. you should follows Java naming convention..you have a getXXX but decalred the return type as "void"...get usully means to return something...
your code is doing too much..and hard to follows..
1. get the selected files
for each selected file
process the file and return the result
write out the result.
/** close the precious resource */
public void closeResource(Reader in){
    if (in != null){
        try{ in.close(); }
        catch (Exception e){}
/** get the total number of line in a file */
public int getLineCount(File file) throws IOException{
    BufferedReader in = null;
    int lineCount = 0;
    try{
        in = new BufferedReader(new FileReader(file));
        while ((in.readLine() != null)
            lineCount++;
        return lineCount;
    finally{ closeResource (in); }
/** read the file */
public void processFile(File inFile, File outFile) throws IOException{
    BufferedReader in = null;
    StringBuffer result = new StringBuffer();
    try{
        in = new BufferedReader(new FileReader(inFile));
        String line = null;
        while ((in.readLine() != null){
            .. do something with the line
            result.append(....);
        writeToFile(outFile, result.toString());
    finally{ closeResource (in); }
public void writeToFile(File outFile, String result) throws IOException{
    PrintWriter out = null;
    try{
        out = new PrintWriter(new FileWriter(outFile, true)); // true for appending to the end of the file
        out.println(result);
    finally{ if (out != null){ try{ out.close(); } catch (Exception e){} } }
}

Multiple projects combined into one .exe file

Similar Messages

Maybe you are looking for